R200 b- 67 HH {127 MN Cc B SA, \DS4 panain SCALE #1 Lovo ALL AROUND , 1 . R (647) 2050 HN_ALL AROUND FOR se, - MATING CONNECTOR, SHROUD CLEARANCE DETAILA 1 SCALE 104 DATIM / \ACKAGING FRAME, / P DATIM B n c DETAL = SCALE 10:1 = 2X 17.00 MN @ APPLIES 2X SEE KEYING OPTION VIEWS FOR POSITIONS x 300 Bisee a) Pal |+ [523] DATUM B A -12.90 | 250/933 AT TANGENT SEE DETAIL A 088 | B23 [ADDED DRAFT DIRECTION SYMBOL | 3-25-11 08s | B22 | ADDED REF DIMENSION FOR Bott an83 4x 10905 LATCH HEIGHT DATUM B. < A I [ fp{0204 088 | B21 |REMOVED THE WORD OPTION* 32H = AT VIEW OF BACK ANGLE = 088 | 620 | CHANGED FROM 179 TO 180 31-11 SEE DETAIL D 088 | B19 ADDED 4x 10.805)[S[ozo@ABIAT BASH] +u-11 [ANDI@IO30@IABIAT TIP FOR 28 BLADE TERMNALS, a 088 | B18 [CHANGED 16x TO 12x FOR THE 15 | 4-11 one BLADE TERMNALS SURFACE MUST BE FREE SE DEEECTS ANG PARTE | 088 | B17 [UPDATED CONNECTOR COLORS 6-11 ALL AROUND oss | B16 5-04-10 tox 930882 088 | B15 [REMOVED |/[o.10@)AB| 504-0 5 068 [B14 [REMOVED SHORTING BAR NOTE 50-10 x 05533, 088 | B13 | UPDATED NOTE 6 REMOVED REV F | soon SECTION ACA 066 | Biz [ADDED NOTE 9 505-10 088 | B11 [ADDED DM 135+0,10/-0.20 MEASURED| 5-1-1 PAT 2 La] 088 | B10 [ADDED SEE NOTE & S000 KEYING OPTION D 088 | B9 [250 WAS 2.80. ADDED (280-TOoM | S-+-0 NOTES: UNLESS OTHERWISE SPEOFED 50E-0 J 4, DRAFT ANGLE PERMISSBLE 0.25MAXINUM, 088 | B7 [ADDED flo20 AB] +60 2. ALL DIMENSIONS SHOWN IN MILLIMETERS. 088 |_B [ADDED DIM [6.43] $0410 3. DIMENSIONING AND TOLERANONG PER ASME Y14.5M-1994 088 | BS JADDED SEC C-C 5-04-10 4 RADI ON ALL CORNERS SHOWN SHARP OR ALL 068 | B4 [UPDATED SEC B-B 504-0 UNSPEGFED RADI 0.25 EXCEPT AS NOTED. : I esmsoas Tosa | 63 Tappep DeTAL D sane 5. STANDARD COLORS FOR POLARIZATION (SEE CHART). one r faa Tl Ba] DEVATION REQURES APPROVAL OF AUTHORIZED PERSON, 1088 | BZ | ADDED SEC _C-C 5-0 6. A FULL SHROUD ON THE MATING CONNECTOR IS REQURED p 088 | B1_| ADDED DIM 0.702015 ALL AROUND | 5-04-10 ane See aS PeScane ae eae ae Texan eet 2} Beeasee see} PINS, REFER TO *SAE/USCAR-12 CONNECTOR DESIGN | BE LET REVISION RECORD DATE | DWN | CHK GUNDE LINES" FOR ADDITIONAL INFORMATION. 1400 7. REFER TO USCAR/EWCAP PART LIST AS FOUND ON WEBSITE DATUM &- itp /wwwwecorteame.org No 4 H YELLOW MOzzz7e 7772 PILES 8. FOR BLADE TERMNAL DESIGN INFORMATION PILPPIIOP IIAP INIT IT ITY] YELLOW 5 B12) 9. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA F YELLOW 1S THE MASTER FOR THIS PART, FOR DIMENSIONAL OR ANY INFORMATION : NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. = = __| @ SECTION C-C_ @ oso BLACK ee a AT DATUM ROL CONTROIED BY ECAP. NO ELASTIC nog fl ~ DIRECT CONNECT INTERFACE ; SCALE 3:1 FEATURES MAY EXTEND ABOVE THS SURFACE aL mole 16 WAY (2 X 8) 15 MM SEALED MALE a = i A BLAKK SECTION B-8 @ QA Fe e9-s016-2-202 Pe re e OPTION Fa CTR SCALE 31 LJ | Ls] LJ | LJcPA OPTIONAL Se pow TABLE OF CONTENTS SHEET NO, SHEET DESCRIPTION 1 NOTES 2 KEY CONFIGURATIONS 3 [RECEPTACLE SEALED ASSEMBLY 47 BOM NOTES: VALID UNLESS OTHERWISE SPECIFED 1. GENERAL: . APPLICATION SPECIFICATION SEE: AS-33472-100 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. STANDARD (NON-SHRT) CONFIGURATIONS DESIGNED TO MATE WITH DEVICE CONNECTION AS SPECIFIED IN DRAWNG EWCAP 999-$-016-2-202, AVALBLE AT <hitpy/ewcopusscarteams.org/>. STANDARD (NON-SHRT) CONFIGURATIONS AND SHORTING BAR CONFIGURATIONS DESIGNED TO MATE WITH BLADE HOUSING ASSEMBLY SPECIFIED IN DRAWING SO-33486~161. FOR 15mm RECEPTACLE TERMNALS TO BE USED WITH THIS ASSEMBLY. SEE MOLEX DRAWNG SD-33012-002. 15mm TERMINALS TO BE USED WITH WRE WITHIN DIAMETER RANGE OF 4mm TO 269mm, FOR 26mm RECEPTACLE TERMINALS TO BE USED WITH THS ASSEMBLY SEE TABLE. 280m TERMNALS TO BE USED WITH WRE WITHIN DIAMETER RANGE OF 150mm TO 330mm. -ASSEMBLY SHIPPED WITH PLR AND CPA IN PRE-LOCK POSITION (SEE SECTION Z-Z PRE-LOCIO. AN THE EVENT THAT THE PLR (S FOUND IN THE SEATED (FNAL LOCK) POSITION, REFER TO MOLEX SPECIFICATION PS-34646-001, AVALABLE AT winenolex.com <httad//wwwmalaxcon>. PRIMARY LOCK REINFORCEMENT (PLR -ASSEMELY CONFORMS TO SAE/USCAR-2 REV.4 WITH THE FOLLOWING EXCEPTIONS: FOR OPTIONS SEE BOM ENGAGEMENT FORCE TO MOVE CPA FROM PRE-LOCK TO FINAL LOCK POSITION WHEN UNMATED: 40N MN, DISENGAGEMENT FORCE TO MOVE CPA FROM FINAL LOCK TO PRE-LOCK POSITION: 3N MIN, 40N MAX, TERMINAL INSERTION FORCE FOR WIRE DIAMETER ABOVE 25mm NOT EXCEEDING 2.69nm SHALL NOT EXCEED 40 NEWTONS. MX150 16 WAY HYBRID RECPT HRN CONN - STANDARD (STD) eee CONTANG: PRODUCT WTROOUC CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY. RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. . PACKAGING SPECIFICATION PER MOLEX DRAWING: Pk-30907-895 <i PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS SPECIFICATION: ES-60000-5016 a. DATA MUST BE SUBMTTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY (0813255) #. FOR INFORMATION ON 16 WAY HYBRID RECEPT HRN ASSY WITH CLIPSLOT SEE E-33476-181 2. DESIGN - MATERIALS: a SEE BOM TABLE 3. DESIGN - GEOMETRY: a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y15M - 1994 c. EDGES AND UNDIMENSIONED DETAILS PER IS01375 d. CORNERS SHOWN AS SHARP TO BE R 02 MAX @, LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Clase B} g. LASER MARKING: TBD BX UPDATED TO PLANNED OBSOLESCENCE Bw ADD NEW P/N 33476-4045 THRU 33476-4046 BY ADD NEW P/N 33476-4042 BY ADD NEW P/N 33476-4041 Bye ADD NEW P/N 33476-4037 33476-4038 33476-4039 _ 33476-4040 ADDED NEW P/N 33476-4023 33476-4024 33476-4025 33476-4026 33476-4027 33476-4028 Bv7 33476-6029 33476-4030 33476-4031 33476-4032 TYCO 2.8mm 33476-4033 33476-4034 CABLE SEAL TERMINAL a ae pe cesta ae GRIP ADD NEW P/N 33476-6016 33476-4017 FEMALE SIZE BvS 33476-4018 33476-4019 RECEPTACLE 33476-4020 33476-4021 Til-14474-KA | 12 Eve "ADD NEW PIN 35476-4014 35476-4015, IFI1-14474-JA 14 BY3 ADO NEW P/N 33476-4012 33476-4013 TAT -14474-HA | 16 (NSPECTION NUMBER LOG BvZ ADD NEW P/N 33476-4011 ce gence wt rs a re ATAA7ecAL Te] teense Fanaa A eA oe FOR OPTIONS SEE BOM IAT-14474-FA | 20 REMOVED: ADD NEW P/N 33476-4006 33476-4007 IF'T-14474-EA | 22 BY, 33476-4008 REV DESCRIPTION = GENERAL TOLERANCES OFENSION STYLE SCA DESIGN UNTS THIRD ANGLE Z S85] lewpos| UNLESS SPECRED) MM ONLY 34 | METRIC |OCISERR ANG oS 2 INCH DRAWN BY DATE TLE abs RRR G7=0 [PLACESIE=~[B==KCUNNINGHAM 2011/10/27 peers a AY EYER MxX150 16 WAY HYBRID RECPT HRN CONN - SHORTING (SHRT) BAR Bee v0 SEES oT eee ws ast TPLACE [03 BY DATE UNLESS COMPONENT NOTED, SEE STANDARD ASSEMBLY os eee) |W tinue E molex Hs2 ANGULAR + 3 TERIAL NO. TNO. SHEET WO. Zue DRAFT WHERE APPLICABLE|__ SEE _BOM SD-33476-161 10F 8 HG MUST REMAIN SHE] THS DRAWING CONTANS INFORMATION THAT IS PROPRIETARY TO MOLEX BX & WITHIN DIMENSIONS. E |INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMSSION| Rae 200 a m mn 2 | . | a | v | s | s | * | s | 2 | 1 2 |KEY CONFIGURATIONS | KEY B KEY F . GENERAL TOLERANCES OMENSION STYLE SCALE DESIGN UNTS: THIRD. ANGLE z ee) (UNLESS SPECFIED! MM ONLY 34_| METRE |OCPROIECTION | Pe INCH | PRR EY DATE ab WO [CPLACES B= }E--=KCUNNINGHAN 2011/10/27 MX150 46 WAY HYBRID : Be Se excersy tate] RECPT SEALED ASSEMBLY ne WO [2ptacesito7 __[+- a = Wo 4 PLACE H 0.3 o- |APPROVED BY DATE = fi 3 o PLACE A 3 TERIAL NO. IDOCORENT NO SHEET NO Ws Rt 3 Zu DRAFT WHERE APPLICABLEL SEE _BOM SD-33476-161 20F 8/4 B REMAIN THIS DRAWING CONTAINS INFORMATION THAT IS PROPRETARY TO MOLEX WITHIN DIMENSIONS E [INCORPORATED AND SHOULD NOT BE WITHOUT WRITTEN PERMSSION| Borne e AT z a 2 . . v * a * . 2 " | . | , | 6 | , | 5 + 3 2 1 \OPTIONAL LASER MARKING ON THIS SURFACE SEE NOTE 3g. LOCATION CODE MOLD CAVITY CODE: c - f- 4.0020.50 Ss << | FaVaww! = ah | a 36.9520.70 TERMINAL POSITION 9 TERMINAL POSITION 10 5242 MN PASS-THRU __. WITH NO CLi ~~ ~ NN \ TERMINAL POSITION 7 TERMINAL POSITION & TERMINAL POSITION 16 TERMINAL POSITION 6 GENERAL TOLERANCES ANGLE Zz WwBoLs| (UNLESS. SPECIFIED) MM ONLY | METRIC |OCIARRR ANS Es INCH [DRAW EY DATE ain N70 [CPCACES|E=[e=~~ KCUNNINGHAM 2014/10/27 MX150 16 WAY HYBRID er 3 PLACES |e ==> | E==> [erECRED BY DATE] RECPT SEALED ASSEMBLY PRIMARY LOCK REINFORCEMENT (PLR) SHOWN PRIMARY LOCK REINFORCEMENT (PLR) SHOWN ASE N70 Fe pracesteos = IN PRE-STAGED POSITION IN FINAL-LOCK POSITION Ww SE 25 7 PLACE [E03 === APPROVED OY DATE SECTION Z-Z SECTION Y-Y Roges| |" ~ [o PLACE HE m S55 Rise SHEET NOL BP Oeee DRAFT WHERE APPLICABLE|___SEE_BOM SD-33476-161 3 OF 8 inketekKs T REMAIN THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX BX WITHIN DIMENSIONS E AND SHOULD NOT BE USED Bofrome eT Zz 2 a nx . v * s s a ] ] , ] a 7 ] s a 4 3 2 1BOM SHEET 1 PLANNED OBSOLESCENCE SEE DRAWING SO-34985-8002 FOR REPLACEMENT P/N'S: BA9ES-XXXX assemsLy| 4 | PART NUMBER TABLE LEGEND DESCRIPTION COLOR BOM/APPLICABLE COMPONENTS TABLE MM ONLY oc NGHAM MX150_ 16 WAY HYBRID RECPT SEALED ASSEMBLY DESCRIPTION NO: UAU2016-0550z mn z 1 zn . . v . . " . 2 1 2 , s 7 3 3 2 1 BOM SHEET 2 PLANNED OBSOLESCENCE SEE DRAWING SD-34985-8002 FOR REPLACEMENT P/N'S B4985-XXXX TABLE LEGEND DESCRIPTION COLOR BOM/APPLICABLE COMPONENTS TABLE METRIC |OC] MX150 16 WAY HYBRID RECPT SEALED ASSEMBLY DESCRIPTION NO: UAU2016-0550z mn z 1 zn . . v . . " . 2 1 2 , s 7 3 3 2 1 BOM SHEET 3 PLANNED OBSOLESCENCE SEE ORAWING SD-34985-8002 FOR REPLACEMENT P/N'S 34985-XXXX TABLE LEGEND DESCRIPTION COLOR BOM/APPLICABLE COMPONENTS TABLE METRIC |OC] MX150 16 WAY HYBRID RECPT SEALED ASSEMBLY DESCRIPTION NO: UAU2016-0550BOM SHEET 4 PLANNED OBSOLESCENCE SEE ORAWING SD-34985-8002 FOR REPLACEMENT P/NS 34985-XXXX assenaty | 4 | & PART NUMBER ASSEMBLY DESCRIPTION TABLE LEGEND MM ONLY METRIC |OC] DESCRIPTION COLOR INGHAM 2041/ MX150 16 WAY HYBRID RECPT SEALED ASSEMBLY BOM/APPLICABLE COMPONENTS TABLE DESCRIPTION NO; UAU2016-0550BOM SHEET 5 PLANNED OBSOLESCENCE SEE DRAWING SD-34985-8002 FOR REPLACEMENT P/NS 34985-XXXX TABLE LEGEND DESCRIPTION COLOR BOM/APPLICABLE COMPONENTS TABLE MM ONLY 21 | MeTRK |OCI NGHAM 2011/ MX150 16 WAY HYBRID RECPT SEALED ASSEMBLY DESCRIPTION NO: UAU2016-0550MX150 16 WAY HYBRID RCPTACLE SEALED CONNECTOR - SHORTING (SHRT) BAR UNLESS COMPONENT NOTED, SEE STANDARD ASSEMBLY TABLE OF CONTENTS SHEET NO] SHEET DESCRIPTION 1 NOTES 2 KEY CONFIGURATIONS 3 RECEPTACLE SEALED ASSEMBLY 4-6 BOM NOTES: VALID UNLESS OTHERWISE SPECRED L GENERAL: a. APPLICATION SPECIFICATION SEE: AS-35472-100 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY. PACKAGING INFORMATION. CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUTY CHECKING, CRIMPING, AND TROUBLESHOOTING. -STANDARD (NON-SHRT) CONFIGURATIONS DESIGNED TO MATE WITH DEVICE CONNECTION AS SPECIFED IN DRAWING EWCAP 999-S-016-2-202, AVALIBLE AT hitpy//awcapuecarteanaorg/. -STANDARD (NON-SHRT) CONFIGURATIONS AND SHORTING BAR CONFIGURATIONS DESIGNED TO MATE WITH BLADE HOUSING ASSEMBLY SPECIRED IN DRAWING SD-33486-161. -FOR 15mm RECEPTACLE TERMINALS TO BE USED WITH THIS ASSEMBLY. SEE MOLEX DRAWING SD-33012-002. ~15nm TERMINALS TO BE USED WITH WIRE WITHN DIAMETER RANGE OF 14mm TO 2.5mm. -FOR 28am RECEPTACLE TERMINALS TO BE USED WITH THS ASSEMBLY SEE TABLE. -2.81m TERMNALS TO GE USED WITH WIRE WITHIN DIAMETER RANGE OF 150mm TO 3.300. -ASSEMBLY SHIPPED WITH PLR AND CPA IN PRE-LOCK POSITION (SEE SECTION 2-Z PRE-LOCK) -N THE EVENT THAT THE PLR IS FOUND IN THE SEATED (FINAL LOCK) POSITION, REFER TO MOLEX SPECIFICATION PS-34646-001, AVAILABLE AT weemolax.com <hitpe//wwwumolax.com> ASSEMBLY CONFORMS TO SAE/USCAR-2 REV.4 WITH THE FOLLOWING EXCEPTIONS: ENGAGEMENT FORCE TO MOVE CPA FROM PRE-LOCK TO FINAL LOCK POSITION WHEN UNHATED: 40N MIN DISENGAGEMENT FORCE TO MOVE CPA FROM FINAL LOCK TO PRE-LOCK POSITION: SN MIN. 40N MAX. -TERMINAL INSERTION FORCE FOR WIRE DIAMETER ABOVE 2Sam NOT EXCEEDING 2.69mm SHALL NOT EXCEED 40 NEWTONS. b. PRODUCT SPECIFICATION SEE: PS-33476-000 c PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-30907-895, CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. th, Re 1.frome_E_P_AM_T v. G 2012/01/11 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMCAL SUBSTANCES FOR BC |_UPDATED TO PLANNED OBSOLESCENCE _| g PRODUCTS SPEUFICATION: ES-40000-5016 BE __7_ADD NEW P/N 33476-2345 THRU 33476-2348 @. DATA MUST BE SUSMTTED UNDER THE MOLEX PART NUMBER TO MDS BAW _}_ADD NeW P/N 33476-2349 THRU 33476-2344 | (COMPANY [b#13255) BAS | _ADD NEW P/N 33476-2338 THRU 33476-2342} f. FOR INFORMATION ON 16 WAY HYBRID RECEPT HRN ASSY WITHOUT CLIPSLOT SEE E-33476-461 BAG CHANGE _TO_PK-30907-895 BA7 ADD NEW P/N 33476-2336 THRU 33476-2337 2 DESIGN | HATERALS! Bs NPN SER | a SEE BOM T BAS | ADD NEW P/N 33476-2377 THRU 2331 3 - GEOM BAR ADD NEW P/N 33476-2314 THRU 2326 a. THS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA [Beets nen Bn sere 1S THE MASTER FOR THS PART, FOR DIMENSIONAL OR ANY INFORMATION BA ADD NEW P/N 33476-2310 33476-2511 NOT SHOWN ON THS DRAWING, ANALYZE THE CAD MODEL. AZ10__ | ADD NEW PIN 33476-2308 33476-2309 1 b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y165M - 1994 ADD NEW PIN 53476-2505 35476-2506 . EDGES AND UNDMENSIONED DETAILS PER ISO715 Azs 33476-2307 @ LETTERNE SHALL BE O15 MAK RAGED INOS MAX RECESS PAD, Are s00 NeW Fn 35476-2306 THSS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AZ7_| ADD NEW P/N 33476-2303 AND CUSTOMER MATERIAL NUMBER. AZ6 ADD NEW P/N 33476-2301 33476-2302 . f, VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-<5499-002 (Cines 8) AZS_|_ADD NEW P/N 33476-2295 33476-2500 9. LASER MARKING: TBD Az ADD NEW P/N 33476-2294 AZS___ | ADD NEW PIN 33476-2292 33476-2293 | ADD NEW P/N 33476-2285 33476-2286 azz 33476-2287 33476-2288 33476-2289 33476-2290 33476-2201 AzI "ADD NEW P/N 33476-2283 334762786 AZ "ADD NEW P/N 33476-2279 33476-2280 AY? ADD NEW P/N 33476-2278 Avis | ADO NEW PIN 38476-2075 53476-2276 , 33676-2277 AY15 | ADD NEW P/N 33476-2273 33476-2276 "ADD NEW PIN 33476-2265 33476-2266 | TYCO 2.8mm AY 33476-2267 33476-2268 33476-2269 33476-2270 CABLE SEAL TERMINAL : AY | ADD NEW PIN 33476-2269 33476-2266 FORD P/N GRIP "AY12 _| ADD NEW P/N 33476-2262 FEMALE SIZE AY | ADD NEW P/N 33476-2261 i RECEPTACLE Ay10__| ADD NEW P/N 33476-2260 TF -14474-KA, 2 "ADD NEW P/N 58476-2257 53476-2250 IFIT=14474-JA 14 AYP 33476-2259 . SES % AY8 | UPDATED 260M WRE SZE = INSPECTION NUMBER LOG 7Y7 | UPDATED WE SIZE IFIT~14474-GA 45 LAST NUMBER USED: IFIT=44474-FA 20 abo AY6__|_ ADD NEW P/N 33476-2755 33476-2256 IFIT-14474-EA 22 REMOVED: AYS | ADD NEW P/N 33676-2256 AY4 | ADD NEW P/N 33676-2259 c REV DESCRIPTION = QUALITY] GENERAL TOLERANCES DRENSON STYLE SCALE] DESEN UTS THIRD ANGLE Z ==8| |ymos| UNLESS SPECIFIED) MM ONLY 31 | METRIC |CIpROIECTION 2o8 mm INCH __| GRAWN EY DATE BRRSEl E70 [RACES eK CUNNINGHAM 2011/0724 MX150_ 46 WAY HYBRID . ae SS ReCeDey were RECPT SEALED ASSEMBLY meee |e\WO [2 pacestor0 CLIPSLOT aS Basle 1 PLACE [03 APPROVED BY DATE = er es 0 PLACE E mi pssael ANGULAR + 3 SEE] Ayese DRAFT WHERE APPLICABLEL, SEE BOM SD-33476-161 1 OF 7 Wao MUST REMAIN THIS DRAWING CONTAINS INFORMATION THAT IS PROPRETARY TO MOLEX BC FI WITHIN DIMENSIONS E INCORPORATED AND SHOULD NOT BE WITHOUT WRITTEN | , | a 7 | s | a a a z 1KEY CONFIGURATIONS GENERAL TOLERANCES THIRD. ANGLE 3 eo {UNLESS SPECIFIED) MM ONLY 4A METRIC |OC] PROJECTION 2 INCH DRAWN BY DATE TTL BB NYO [PLACES SU KCUNN INGHAM 2011/10/26 MX150 16 WAY HYBRID es [PLACES | --|+->|oe0e BY DATE] RECPT SEALED ASSEMBLY as N/-O [2 PLACESi+ 010 _[2 =o7E CLIPSLOT 2 TPLACE [03 _|=-- Bis WO [oprace 3 = m $s ANGULAR + 3 ERAT . SHEET NO oes DRAFT WHERE APPLICABLE! SEE BOM SD-33476-161 20F7 to MUST REMAIN THS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX Bi WITHIN DIMENSIONS E INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMSSION| Bfarese rN T z a a z , . v " . * . a 1 | 2 | , | 5 , | 4 4 2 1OPTIONAL LASER MARKING ON THIS SURFACE SEE NOTE 3g TERMINAL POSITION 2 TERMINAL POSITION 7 \ / {hh ___ TERMINAL POSITION 1 \ -TERMINAL POSITION 8 \ J F y ! 1 \ ifn efi! a . POSTON { ! 7 I wif ~ Go TERMINAL POSITION 9- TERMINAL POSITION 1% TERMINAL POSITION 10 ~ T TERMINAL POSITION 15 [A Y= v7 36.9540.70 ee . 7 LOCATION CODE- RECYCLE CODE MOLD CAVITY cooE___\ [- i > Liv, \ = / | ij ji | J ~ 4.002050 Re SS SSIWG | IWS aa Cho / ics SS = GF A mS = LOSS g QUALITY] GENERAL TOLERANCES DENSON STYLE SCALE DESIGN UNTS: THIRD. ANGLE ted 3_5 SYMBOLS] (UNLESS SPECIFIED) aM ONLY 1 44 | METRIC lo CU PROJECTION >_~ aie VW tae CUNNINGHAM 2011/10/26 MX150 46 WAY HYBRID PRIMARY LOCK REINFORCEMENT (PLR) SHOWN PRIMARY LOCK REINFORCMENT (PLR) SHOWN ae 2 [3 PLACES|+- [+--~ [CHECKED BY DATE RECPT SEALED ASSEMBLY N CRe-SIARD osroN peer posren Ree W-0 B PLACES E10 Eo== CLIPSLOT = - a 1 EO, f-- aSee WO TPA TE E molex wo2d ANGULAR + 3 MATERIAL NO. NO. SHEET NO. Binks DRAFT WHERE APPLICABLE|___ SEE _BOM SD-33476-181 3 0F 7 Maw MUST REMAIN SIZE| THIS DRAWING CONTAINS NFORMATION THAT IS PROPRETARY TO MOLEX BC WITHIN DIMENSIONS E INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION Prone a 2 a = . . v * s * | 5 : 2 1a u a z a z . . v s * . 2 a 2 , a 7 s 3 4 3 2 1 BOM SHEET 1 ASSEMBLY DESCRIPTION LEGEND TABLE DESCRIPTION COLOR BOM/APPLICABLE COMPONENTS TABLE MM ONLY METRIC INGHAM MX150 RECPT DESCRIPTION NO: UAU2016-0550BOM SHEET 2 PLANNED OBSOLESCENCE SEE DRAWING SD-34985-8002 FOR REPLACEMENT P/N'S B498S-XXXX ASSEMBLY PART NUMBER: ASSEMBLY DESCRIPTION LEGEND TABLE DESCRIPTION COLOR BOM/APPLICABLE COMPONENTS TABLE MM ONLY METRIC _|OC] INGHAM 2011/ MX150 Y RECPT DESCRIPTION NO: UAU2016-0550BOM SHEET 3 PLANNED OBSOLESCENCE SEE DRAWING SD-34985-6002 FOR REPLACEMENT P/NS 34985-XXXX LEGEND TABLE DESCRIPTION COLOR BOM/APPLICABLE COMPONENTS TABLE MM ONLY METRIC [OC] MX150 Y RECPT DESCRIPTION NO: VAU2016-0550PLANNED OBSOLESCENCE SEE DRAWING SD-34985-8002 FOR REPLACEMENT P/N'S B4985-XXXX LEGEND TABLE DESCRIPTION COLOR BOM/APPLICABLE COMPONENTS TABLE MM ONLY 41 | MeTRC |OC] NGHAM 2011/ MX150 16 WAY HYBRID RECPT Y DESCRIPTION NO: UAU2016-0550