High performance sealing and strain relief
backshell solutions
AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR
BACKSHELLS
EXTENSIVE RANGE OF TERMINATION
OPTIONS FOR CIRCULAR CONNECTORS
PAGE 2AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
Introduction.....................................................................................................................................
Selecting a Backshell....................................................................................................................
Termination Styles...........................................................................................................................
Material & Plating Codes..............................................................................................................
Modification Codes........................................................................................................................
Connector Interface Table...........................................................................................................
POLAMCO Backshell Part Numbering System....................................................................
Calculating Wire Bundle Diameter...........................................................................................
Product Finder..................................................................................................................................
BAND
BT Series............................................................................................................................................
88 Series.............................................................................................................................................
AP Series............................................................................................................................................
DS Series......................................................................................................................................
SPRING
91 Series.............................................................................................................................................
BRAID TAIL
70 Series............................................................................................................................................
BRAID TRAP
95 Series.............................................................................................................................................
CONE
64 Series.............................................................................................................................................
308 Series...........................................................................................................................................
STRAIN RELIEF
77 Series.............................................................................................................................................
MESH TAPE
KMA Series..........................................................................................................................................
KMCC Series......................................................................................................................................
HEAT SHRINK BOOT
76 Series.............................................................................................................................................
THREAD EXTENDERS & ADAPTERS
PG Series............................................................................................................................................
DC Series.............................................................................................................................................
TINEL RING
TXR Series...........................................................................................................................................
HEXASHIELD
HexaShield Series............................................................................................................................
COBRAHEAD
Backshell modification.....................................................................................................................
BAND STRAPS
Backshell accessory..........................................................................................................................
Glossary of Terms..............................................................................................................................
Contents
3
4
5
6
7
9
10
11
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
53
MULTIPLE CONFIGURATIONS
• Low profile options
Compatible with many shell sizes
and plating finishes
Wide variety of modification
options allow customisation of
standard ranges to suit specific
requirements
EASY INSTALLATION
• Tool free ranges available
Simple and fast termination
solutions
Two-part components allow
uncoupling for repairs to help
eliminate damage to the boot
HIGH-RELIABILITY
SOLUTIONS
Backshells can provide strain-
relief and cable support to help
prevent bending or overflexing
Oer individual or overall 360°
screening against EMI/RFI
interference
Backshells can oer protection
towards the eectiveness of the
cable, sealing against water and
dirt ingress
For high-performance sealing and strain
relief, the ideal mate for a TE Connectivity
(TE) connector or molded part in a wiring
application, is a TE backshell.
TE supplies a comprehensive range of circular POLAMCO
and Raychem backshells that can assist in providing
effective strain relief, environmental sealing and
electromagnetic interference (EMI)/radio frequency
interference (RFI) shielding, helping you meet today’s
challenges in demanding environments, across many market
sectors.
Spin-Coupling Adapters
Spin-coupling adapters are two-part components that have
a rotatable coupling nut and a grooved body designed to
accommodate lipped-type heat-shrinkable boots.
Spin-couplings with a compatible molded part are used
to optimize environmental protection and strain relief of
unscreened cable terminations. Cable repairs can often be
made without removing the boot.
CIRCULAR BACKSHELLS
Termination Options For Circular Connectors
Backshell
Connector
Heat-shrinkable molded
boot (if used)
Rollback Repair Possible With A Backshell
Many cable repairs are made within 75 mm of the
connectors—usually because of a broken pin or wire. By
reheating the heat-shrinkable boot and unscrewing the
backshell coupling nut, the boot can be “rolled back,
providing access to the rear of the connector for repair. This
technique is applicable to spin-coupling backshells utilizing
a heatshrink boot.
PAGE 4AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
Selecting A Backshell
TE offers an extensive standard
range of backshell styles to suit a
wide variety of applications and
requirements. These ranges can be
extensively customized using an
array of plating options, materials
and modification codes. Use the
product finder on pages 12-13 to
select the most suitable standard
series for your requirement.
Adapter Code
An alphabetical code is used to identify connectors
with similar adapter interfaces. This code is used to
determine the backshell family and part number. The
table connector interface table on page 9 shows the
appropriate code to match a variety of interfaces.
Backshell Part Number
The part number is the sequence of numbers and
letters that describes the adapter family (or series),
size, angle, material, finish, and modifications. The
part numbering system is explained on page 10 for
POLAMCO series backshells and on the individual
Raychem product pages.
Family/Series
TE offers several families (or series) of backshell
products. Each part number begins with an numerical
or alphanumeric prefix denoting the specific product
family.
Entry Size
Entry size is the diameter of the hole through which
the cable enters into the adapter. If unknown, the
diameter required can be calculated using the formula
shown on page 11.
Shell Size
This is the size of a connector as specified by the
connector manufacturer. It is normally a two-digit
number between 08 and 24, although certain
connectors are obtainable in either larger or
smaller sizes and some use letter codes.
Modifications
Other options (such as extended length, part
marking etc) are available and are defined by
standard modification codes - listed on pages
7-8. Alongside the standard ranges shown in this
brochure, TE also offer custom solutions to fit
more exact requirements. Contact the sales office
to find out more.
Please refer to the fold out interface page (attached to the reverse cover of this brochure)
for interface specific measurements.
PAGE 5AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
Termination Styles
Braid Tail
Band
Spring
Cone
Braid Trap
Spring wrapped around braid
(without tooling)
Used on: 91 Series
Band clamped with calibrated tool
Used on: BT/88/AP/DS Series
Product supplied with pre-terminated braid
tail
Used on: 70 Series
Braid/Pigtails clamped between cones
Used on: 64/308/HexaShield Series
Braid trapped in loose fitting thread
Used on: 95/77 Series
Tinel Ring
Memory ring shrunk by the application
of heat
Used on: TXR
Pre-Fabricated
Backshell with pre-installed braid tail and
heatshrink boot. Installed on cable with
heat gun.
Used on: KTKK/TAK
Mesh Tape
Wraps mesh tape wraps around individual
screens to eliminate EMC windows
Used on: KMA Series
There are a variety of methods for terminating screening braid to backshells,
many of which are covered within TE’s standard range of backshells shown
below.
PAGE 6AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
Material Description
POLAMCO Raychem
1 A ALUMINIUM ALLOY 6000 SERIES
2 B NICKEL ALUMINIUM BRONZE DGS 1043 / NES 833 (MARINE APPLICATIONS)
4S/K*STAINLESS STEEL 303 S31 / 304
46 - STAINLESS STEEL 316 (MARINE APPLICATIONS)
6S*STAINLESS STEEL NUT / ALUMINIUM BODY
74 -PEI (30% GLASS FILLED HIGH TEMPERATURE COMPOSITE) - CURRENTLY AVAILABLE IN STRAIGHT BTH1 &
BTF1 RANGES
Plating Description
POLAMCO Raychem ROHS
Compliant Conductivity Environmental
Protection
B B CADMIUM, OLIVE DRAB OVER ELECTROLESS NICKEL NO CONDUCTIVE 500 HRS
C C ELECTROLESS NICKEL YES CONDUCTIVE 48 HRS
D G BLACK ANODISE YES NON
CONDUCTIVE 500 HRS
J J PASSIVATE (STAINLESS STEEL ONLY) YES - -
U / UNPLATED CLEAN FINISH NOT SHOT BLASTED YES - -
Z W SHOT BLAST FOR NON-REFLECTIVE FINISH
(NICKEL ALUMINIUM BRONZE ONLY) YES CONDUCTIVE -
ZB U ZINC COBALT OVER ELECTROLESS NICKEL WITH AN OLIVE
DRAB CHROMATE CONVERSION YES CONDUCTIVE 350 HRS
ZK - ZINC COBALT OVER ELECTROLESS NICKEL WITH A BLACK
CHROMATE CONVERSION YES CONDUCTIVE 350 HRS
ZN Z ZINC NICKEL BLACK PASSIVATE OVER
ELECTROLESS NICKEL YES CONDUCTIVE 500 HRS
Material & Plating Codes
These lists are not exhaustive - contact TE for further information
* HexaShield backshells only. Code B not available for HexaShield backshells
PAGE 7AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
Sux Meaning Applies to Series Aects
POLAMCO Raychem
TE F Internal blue polytetrafluoroethylene
(PTFE) coating All Finish
TEG - Internal green PTFE coating All (TE & TEG are mutually exclusive) Finish
TAH -Internal PTFE coating, anti-decoupling, hex
nut (wire retained) Replaces codes TE, AD & HEX Finish
BN - Nickel aluminium bronze nut, shot blast finish Aluminium backshells Material / finish
ESC - ESC style interface A-interface only Interface
NGP - No grommet profile Consult engineering for availability Interface
AD S Anti-decoupling All non-direct coupling Interface
TD - Torque-dierential anti-decoupling All non-direct coupling
(AD & TD are mutually exclusive) Interface
G P Coupling nut with grub screw L and LV interface Interface
FB - Wide body All – consult engineering for dimensions Body shape
SE - Swept elbow (cast centre section) All 90° except 96 series *Body shape
AP - Spanner holes in coupling nut All except AP series, where spanner holes
are standard Nut
FN - Coupling nut with flats All Nut
HEX - Coupling nut hex All (FN & HEX are mutually exclusive) Nut
WN - Wire-retained nut (hex shape) All non-direct coupling
(WN & HEX are mutually excl.) Nut
TH - Tooth inspection holes in coupling nut All interfaces with anti-rotation teeth Nut
W - Wire-locking holes in coupling nut All except A-interface Nut
NW - No wire-locking holes in coupling nut A-interface only Nut
WL - Drilled-head screws in cable clamp, tangential
hole in adaptor body Backshells with cable clamp Body
WLT -Safety wire holes at all threaded junctions plus
drilled head screws in cable clamp Backshells with cable clamp Body
* consult TE for availability / available values / dimensions
** xx / xx.x specified in mm
Modification Codes
TE’s standard range of backshells can be extensively modified using the codes
listed below. Many of these options can be used in combination to create a
solution to suit most needs. Consult TE for assistance regarding the use of
modification codes.
PAGE 8AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
Sux Meaning Applies to Series Aects
POLAMCO Raychem
BS - Body strap All *Body
F - Wrench flats on follower All *Body
2F - Two flats instead of four All *Body
DH D Drain holes in follower body All *Body
PH - Potting hole All *Body
PH2 - Two potting holes, 180° apart All *Body
PHG - Potting hole + outgassing hole All *Body
TB - With added boot groove Backshells without cable clamp Boot groove
NG - No boot groove Backshells that have a boot groove Boot groove
ET ET Earth tag BT, 91 & 97 series Termination
WS - Drilled-head screws in cable clamp Backshells with cable clamp Cable clamp
CL - Clinch nuts in cable clamp Backshells with cable clamp Cable clamp
S - Short screw modification Backshells with cable clamp Cable clamp
TS - Telescoping screws Backshells with cable clamp Cable clamp
LP - Low-profile (non-preferred: use kxx or exx) 90° *Body shape
RW - Reduced weight *Body shape
Lxx - Non-standard length ** All straight *Body shape
Cxx -Non-standard front length ** All 45° *Body shape
Dxx -Non-standard rear length ** All 45° *Body shape
Kxx - Non-standard front length (to entry c/l) ** All 90° except 96 series *Body shape
Exx - Non-standard can length ** All plug-in style 90° *Body shape
Fxx - Non-standard rear length ** All 90° except 96 series *Body shape
Bxx - Non-standard coupling nut diameter ** All *Body shape
Txx.x - Non-standard throat diameter ** All *Body shape
CON - Conductive o-ring All backshells with o-rings O-ring
FS U Fluorosilicone o-rings / seals All backshells with o-rings O-ring
NIS N Nitrile o-ring All backshells with o-rings O-ring
VS V Fluoroelastomer o-ring All backshells with o-rings O-ring
NS - No seal All backshells with o-rings O-ring
* consult TE for availability / available values / dimensions
** xx / xx.x specified in mm
Modification Codes (cont...)
PAGE 9AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
Backshells designed
to be used in
conjunction with:
POLAMCO Backshell
Connector Interface Code
Raychem Backshell
Connector Interface Code
MIL-DTL-26482 SERIES I DG, KG, DM, K, DS, UT 21
PATT 105 / PATT 603* D76
MIL-DTL-26482-SERIES II
MIL-DTL-83723 SERIES I & II A 54
MIL-DTL-38999 SERIES I F
(odd numbered shell sizes) 41
MIL-DTL-38999 SERIES II F
(even numbered shell sizes) 41
MIL-DTL-38999 SERIES III / EN3645 H 40
MIL-DTL-38999 SERIES IV H 40
AS50151 L, LS, LM, LV 18
MIL-DTL-5015D CANNON CA-BAYONET LC, LCS 58
MIL-DTL-5015 “ABB M.S” Q78
MIL-DTL-5015H A 54
MIL-DTL-83723 SERIES III (BAYONET) A 54
MIL-DTL 83723 SERIES III (THREADED) A 54
MIL-DTL-28840 Z 30
EN2997
(SAME AS 83723 SERIES III (STAINLESS)) A 54
ESC10 A 54
ESC11 A 54
VG96912 SM 47
PAT 608 S79
Connector Interface Table
Solutions for other interfaces may be available - contact TE for further information
PAGE 10AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
91H1 - 17 - 08 - 1 - C - SL - L50 - HE200
POLAMCO Backshell Part Numbering System
Series
Entry Size2
Refer to series datasheet - note that some
series do not have this field
Shell size1
2-digit* numerical value equal to connector
shell size
Connector interface
Refer to connector interface table - page 9
Angle
1 = Straight
2 = 45°
3 = 90°
4 = 60°
5 = 30°
7 = 75°
3C = Cobra Head
3M = Double Weld 90°
Material
Refer to material table - page 6
Finish
Refer to finish table - page 6
Series specific option
Refer to series page
Note: there may be multiple fields
Generic modification option
Refer to modification code table - page 7-8
Note: there may be multiple fields
Auxiliary Components Supplied
Refer to individual series
1 - Prefix shell size with F for direct coupling with grommet follower
(available on interfaces A, D, F, H, K, SM, Q, Z)
2 - Replace dash before entry size with T2 or T3 (straight only) for type 2 assembly
(available when entry diameter exceeds throat diameter - see p44 for example)
* exceptions: RM, L, LC, Q interface - refer to connector interface table for correct shell size
Please note that this system does not apply to the TXR and HexaShield backshells -
refer to individual product pages for the correct method
PAGE 11AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
Table 1
Calculating Wire Bundle DIameter
Where it is not possible to physically measure the wire bundle diameter it
can be estimated from the individual wire diameters using the following
calculation.
When selecting the backshell cable entry size from provided tables, it is a good idea to err on
the side of too large, as an undersized cable can always be enlarged with tape or a grommet
to fit the cable clamp. When calculating wire bundle diameters, note that the gauge # of the
wire describes only the diameter of the metal conductor, and not the overall diameter including
insulation and/or braids. Refer to the appropriate wire specification for the actual diameter of
the wire for use in the following calculations.
Steps:
1. Determine each type of wire diameter
2. Choose the multiplication factor from table 1 below
3. Calculate the bundle diameter using the following formula:
(Bundle Diameter) = Factor x n1 x d1
2 + n2
2 + d2
2 + n3 x d3
2 + ... + nn x dn
2
Where d1 ... dn are diameters of each type of wire in the bundle (when using wires from dierent diameters)
n1 ... nn the quantity of wires with the same diameter
Factor is chosen in according to the total number of wires in the bundle (TABLE I)
4. Add thickness of any shielding or jacketing to core wire bundle diameter.
(Final OD) = (Bundle Diameter) + 2 x (Shield Thickness) + 2 x (Jacket Thickness)
MULTIPLICATION FACTORS
NO OF
WIRES 1 2 3 4 5 6 7 AND
MORE
FACTOR 1 1.415 1.242 1.205 1.208 1.225 1.15
PAGE 12AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
SCREEN TERMINATION STRAIN RELIEF &
CABLE SEALING
ADDITIONAL
COMPONENTS
REQUIRED
Overall
Screen
Individual/
Multiple
Screens
Tool Free
Reworkable
Cable Clamp
Heat Shrink
Boot Option
Boot
Band
BT Series
Page 14
88 Series
Page 16
AP Series
Page 18
DS Series
Page 20 •• •••
91 Series
Page 22
70 Series
Page 24
95 Series
Page 26
64 Series
Page 28
308 Series
Page 30
BAND
SPRING
BRAID
TAIL
BRAID
TRAP
CONE
Product Finder
PAGE 13AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
SCREEN TERMINATION STRAIN RELIEF &
CABLE SEALING
ADDITIONAL
COMPONENTS
REQUIRED
Overall
Screen
Individual/
Multiple
Screens
Tool Free
Reworkable
Cable Clamp
Heat Shrink
Boot Option
Boot
Band
77 Series
Page 32
KMA Series
Page 34
KMCC Series
Page 36 •••••
76 Series
Page 38
PG Series
Page 40
DC Series
Page 42
TXR
Page 44
HexaShield
Page 46 •••
STRAIN
RELIEF
MESH TAPE
HEAT
SHRINK
BOOT
THREAD EXTENDERS
& ADAPTERS
TINEL
RING
Product Finder
HEX
PAGE 14AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
ØB*
A THREAD*
ØG
ØH
C*
E*
K*
F - SEE TABLE 3
D - SEE TABLE 3
L - SEE TABLE 1
E*
K*
F - SEE TABLE 3
*REFER TO INTERFACE PAGE CLICK HERE
STAINLESS STEEL/BRONZE
90° STYLE
ANGLE 1
ANGLE 2 ANGLE 3
BT Series
Band Strap Backshell
Screen termination with a stainless steel band
Sealing and strain relief of backshell by heat shrink boot
Calibrated application tooling required
Banding strap available – see page 50
SPECIFICATIONS
Screen Termination: Overall Screen
Strain Relief & Cable Sealing: Heat Shrink Boot Option
Additional Components Required: Boot, Band
PAGE 15AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
ENTRY
SIZE
ØG
MIN
ØH
MAX
03 4,7 13,9
04 6,3 13,9
05 7,9 15,5
06 9,5 17,2
07 11,1 18,7
08 12,7 20,3
09 14,2 21,9
10 15,8 23,5
11 17,4 25,1
12 19,0 26,7
13 20,6 28,3
14 22,2 29,9
15 23,8 31,5
16 25,4 33,1
17 27,0 34,7
18 28,6 36,3
19 30,2 37,9
20 31,8 39,5
21 33,3 41,1
22 35,0 42,7
23 36,5 44,3
24 38,1 45,9
SHELL SIZE
ALL INTERFACES
D MAX FMAX
03 26,6 29,4
08/09 26,4 31,5
10/10SL/11 29,4 32.7
12/12S/13 27,3 33,7
14/14S/15 30,0 35,5
16/16S/17 30,5 37,4
18/19 30,9 39,0
20/21 31,6 41,6
22/23 32,3 42,1
24/25 32,9 45,1
28/29 34,1 46,1
32/33 35,4 48,6
36 36,3 52,3
40 36,2 54,8
44 37, 8 58,0
48 39,0 61,1
61 31,4 52,1
SHELL SIZE
INTERFACE
AA AD/
SS D F H K Q S SM Z
03 28,0 32,0 - - - - - - - -
08/09 28,0 32,0 34,0 30,0 30,0 34,0 - 32,0 30,0 -
10/10SL/11 28,0 32,0 34,0 30,0 30,0 34,0 36,0 32,0 30,0 -
12/12S/13 28,0 32,0 34,0 30,0 30,0 34,0 - 32,0 30,0 38,2
14/14S/15 28,0 32,0 34,0 30,0 30,0 34,0 36,0 32,0 30,0 38,2
16/16S/17 28,0 32,0 34,0 30,0 30,0 34,0 36,0 32,0 30,0 38,2
18/19 28,0 32,0 34,0 30,0 30,0 34,0 36,0 32,0 30,0 38,2
20/21 28,0 32,0 34,0 30,0 30,0 34,0 36,0 32,0 30,0 38,2
22/23 28,0 32,0 34,0 30,0 30,0 34,0 36,0 32,0 30,0 38,2
24/25 28,0 32,0 34,0 30,0 30,0 34,0 40,0 32,0 30,0 38,2
28/29 36,0 32,0 - - - - 45,0 - - 38,2
32/33 40,0 40,0 - - - - 50,0 ---
36 45,0 45,0 - - - - 50,0 ---
40 50,0 50,0 - - - - - - - -
44 60,0 60,0 - - - - - - - -
48 60,0 60,0 - - - - - - - -
61 28,0 32,0 - - - - - - - -
Table 1 - Length
Table 2 Table 3
BT H 1 - 17 - 10 - 1 - B - SB
Example:
Series
Connector interface*
Angle
Shell size
Entry size
Material
Finish
Band
SB - supplied with standard band
see p50 for options - omit for no band
All dimensions in MM unless otherwise stated.
PAGE 16AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
STAINLESS STEEL/BRONZE
90° STYLE
ØB*
A THREAD*
ØG
ØH
C*
E*
K*
ANGLE 1
ANGLE 2 ANGLE 3
F - SEE TABLE 3
D - SEE TABLE 3
L - SEE TABLE 1
E*
K*
F - SEE TABLE 3
M: MINIMUM CLAMPING
DIAMETER
REAR VIEW
15,50 MAX
15,50 MAX
15,50 MAX
15,50 MAX
*REFER TO INTERFACE PAGE CLICK HERE
88 Series
‘Band In A Can’ Backshell
Screen termination by standard stainless steel band
Strain relief by screw on cable clamp ‘can’
• ‘Can’ provides protection of screen termination area
Banding strap available – see page 50
SPECIFICATIONS
Screen Termination: Overall Screen
Strain Relief & Cable Sealing: Cable Clamp
Additional Components Required: Band
PAGE 17AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
ENTRY
SIZE
ØG
MIN
ØH
MAX
M
±0,5
03 4,7 17,2 6,8
04 6,3 18,8 6,7
05 7,9 20,4 7,8
06 9,5 22,0 7,9
07 11,1 23,5 8,6
08 12,7 25,0 9,0
09 14,2 26,7 10,2
10 15,8 28,3 10,4
11 17,4 30,0 12,5
12 19,0 31,5 12,4
13 20,6 33,0 15,0
14 22,2 34,7 15,4
15 23,8 36,4 16,8
16 25,4 37,8 17,3
17 27,0 39,4 18,8
18 28,6 41,0 19,5
19 30,2 42,6 23,9
20 31,8 44,2 22,4
21 33,3 45,8 23,8
22 35,0 47,3 24,4
23 36,5 50,9 26,4
24 38,1 50,9 26,4
SHELL SIZE INTERFACE
A D F H K LC Q S SM Z
03 38,0 - - - - - - - - -
08/09 38,0 38,0 38,0 38,0 38,0 38,0 - 40,0 38,0 -
10/10SL/11 38,0 38,0 38,0 38,0 38,0 38,0 - 40,0 38,0 41,0
12/12S/13 38,0 38,0 38,0 38,0 38,0 38,0 43,0 40,0 38,0 41,0
14/14S/15 38,0 38,0 38,0 38,0 38,0 38,0 43,0 40,0 38,0 41,0
16/16S/17 38,0 38,0 38,0 38,0 38,0 38,0 43,0 40,0 38,0 41,0
18/19 38,0 38,0 38,0 38,0 38,0 38,0 43,0 40,0 38,0 41,0
20/21 38,0 38,0 38,0 38,0 38,0 38,0 43,0 40,0 38,0 -
22/23 38,0 38,0 38,0 38,0 38,0 38,0 43,0 40,0 38,0 41,0
24/25 38,0 38,0 38,0 38,0 38,0 38,0 43,0 40,0 38,0 41,0
28/29 38,0 - - - - 38,0 43,0 - - 41,0
32/33 38,0 - - - - 38,0 43,0 - - 41,0
36 38,0 - - - - 38,0 43,0 - - -
40 38,0 - - - - 38,0 - - - -
44 38,0 - - - - - - - - -
48 38,0 - - - - - - - - -
61 38,0 - - - - - - - - -
Table 2
Table 1 - Length
SHELL SIZE ALL INTERFACES
D MAX FMAX
03 38,5 39,9
08/09 50,5 51,9
10/10SL/11 51,3 53,7
12/12S/13 51,5 54,5
14/14S/15 52,1 56,7
16/16S/17 53,4 58,4
18/19 53,7 60,0
20/21 54,5 61,6
22/23 54,9 63,1
24/25 55,3 64,6
28/29 55,3 67,1
32/33 57,4 70,3
36 58,9 75,1
40 60,1 77,3
44 46,7 65,5
48 47,9 68,6
61 40,3 49,6
Table 3
88 F 1 - 13 - 06 - 1 - C - SB
Example:
Series
Connector interface*
Angle
Shell size
Entry size
Material
Finish
Band
SB - supplied with standard band
see p50 for options - omit for no band
All dimensions in MM unless otherwise stated.
PAGE 18AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
ØB*
A THREAD*
ØG
ØH
C*
E*
K*
ANGLE 1
ANGLE 2 ANGLE 3
F - SEE TABLE 1
D - SEE TABLE 1
L - SEE TABLE 1
J - SEE TABLE 1
*REFER TO FOLD PAGE ADD 3,2 TO ØB CLICK HERE
4 SPANNER HOLES Ø2,8
AP Series
Band Backshell
Screen termination by standard stainless steel band
European preferred style, without band retention lip
Sealing and strain relief of backshell by heat shrink boot
Banding strap available – see page 50
SPECIFICATIONS
Screen Termination: Overall Screen
Strain Relief & Cable Sealing: Heat Shrink Boot Option
Additional Components Required: Boot, Band
PAGE 19AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
ENTRY
SIZE
ØG
MIN
ØH
MAX
04 3,2 12,4
06 4,8 12,4
08 6,4 14,0
10 7,9 15,5
12 9,5 17,1
14 11,1 18,7
16 12,7 20,3
18 14,2 21,6
20 15,9 23,5
24 19,0 26,7
28 22,2 29,8
32 25,4 33,0
34 27,0 34,6
36 28,6 36,2
40 31,8 39,4
Table 1 - Length
Table 2 - Entry Size
SHELL SIZE
ALL INTERFACES
D MAX FMAX J J J J J J J J J
03 26,6 29,6
L
MAX
28,5 33,5 38,5 43,5 48,5 53,5 58,5 63,5 68,5
08/09 26,4 32,2 29,9 34,9 39,9 44,9 49,9 54,9 59,9 64,9 69,9
10/10SL/11 26,3 33,7 30,8 35,8 40,8 45,8 50,8 55,8 60,8 65,8 70,8
12/13 27,2 35,2 31,6 36,6 41,6 46,6 51,6 56,6 61,6 66,6 71,6
14/14S/15 28,0 36,9 32,5 37,5 42,5 47, 5 52,5 57,5 62,5 67,5 72,5
16/16S/17 28,3 38,5 33,5 38,5 43,5 48,5 53,5 58,5 63,5 68,5 73,5
18/19 29,1 40,1 34,3 39,3 44,3 49,3 54,3 59,3 64,3 69,3 74,3
20/21 29,5 41,6 35,2 40,2 45,2 50,2 55,2 60,2 65,2 70,2 75,2
22/23 30,4 43,1 36,2 41,2 46,2 51,2 56,2 61,2 66,2 71,2 76,2
24/25 32,1 44,6 37,2 42,2 47,2 52,2 57,2 62,2 67, 2 72,2 77,2
28/29 32,1 44,6 36,5 41,5 46,5 51,5 56,5 61,5 66,5 71,5 76,5
32/33 33,7 47, 8 37, 4 42,4 47,4 52,4 57, 4 62,4 67, 4 72,4 77,4
36 34,9 51,0 38,3 43,3 48,3 53,3 58,3 63,3 68,3 73,3 78,3
40 36,2 54,2 39,2 44,2 49,2 54,2 59,2 64,2 69,2 74,2 79,2
44 37, 8 57,4 40,1 45,1 50,1 55,1 60,1 65,1 70,1 75,1 80,1
48 39,0 60,6 41,0 46,0 51,0 56,0 61,0 66,0 71,0 76,0 81,0
61 31,4 41,4 36,0 41,0 46,0 51,0 56,0 61,0 66,0 71,0 76,0
AP H 1 - 09 - 08 - 10 - 1 - B - SB
Example:
Series
Connector interface*
Angle
Shell size
Entry size
Chamber length (Straight only - omit for angle 2 & 3)
Material
Finish
Band
SB - supplied with standard band
see p50 for options - omit for no band
All dimensions in MM unless otherwise stated.
PAGE 20AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
STAINLESS STEEL/BRONZE
90° STYLE
ØB*
A THREAD*
ØG
ØH
C*
E*
K*
F - SEE TABLE 2
M
E*
K*
F - SEE TABLE 2
J CHAMBER LENGTH
D**
ANGLE 1
ANGLE 2 ANGLE 3
30,00 ± 0,50
30,00 ± 0,50
30,00 ± 0,50
30,00 ± 0,50
2,8MM 4 PLACES
2,8MM 4 PLACES
ØB**
ØB** ØB**
*REFER TO INTERFACE PAGE ADD 3,2 TO ØB CLICK HERE
10,00
DS Series
Band Strap Backshell
Individual and overall screen termination by stainless steel band
Individual screens terminated inside the backshell, close to the
connector in order to minimize cross-talk
Sealing and strain relief
Banding strap available – see page 50
SPECIFICATIONS
Screen Termination: Overall Screen, Individual or Multiple Screens
Strain Relief & Cable Sealing: Heat Shrink Boot Option
Additional Components Required: Boot, Band
**SEE NOTE
PAGE 21AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
ENTRY
SIZE ØG ØH ØB’
MAX
D’
MAX
03 4,0 6,0 27,3 30,5
04 5,5 7,5 27, 3 30,5
05 7,5 9,5 27,3 30,5
06 9,5 11,5 31,8 31,0
07 10,5 12,5 31,8 31,0
08 12,5 14,5 35,3 32,0
09 14,0 16,0 35,3 32,0
10 15,5 17,5 35,3 32,0
11 17,0 19,0 38,3 33,0
12 18,5 20,5 38,3 33,0
13 20,0 22,0 39,8 33,5
14 21,5 23,5 44,3 34,0
15 23,0 25,0 44,3 34,0
16 25,0 27,0 47, 2 34,5
J ± 0,2
CHAMBER
J'± 2,0
CHAMBER
M
MAX
M'
MAX
20 - 60,0 -
25 - 65,0 -
30 30 70,0 70,0
35 35 75,0 75,0
40 40 80,0 80,0
45 45 85,0 85,0
50 50 90,0 90,0
Table 1
Table 3
Table 2
SHELL SIZE ALL INTERFACES
D MAX FMAX MAXENTRY*
08/09 *38,4 *
10/10SL/11 *39,0 *
12/12S/13 30,5 39,6 05
14/14S/15 31,0 43,6 07
16/16S/17 32,0 45,1 10
18/19 33,0 46,6 12
20/21 33,5 48,1 13
22/23 34,0 49,6 15
24/25 34,5 51,1 16
ØB
M’
J’
T3
ØB
A THREAD
ØG
ØH
10,00
30,00 ± 0,50
Series
Connector interface*
Angle
Shell size
Straight only: if max entry exceeded
replace ‘-’ with ‘T3’ SEE NOTE
Entry size
Chamber length
Straight only (omit for angle 2 & 3)
Material
Finish
Band
SB - supplied with 2 x standard bands
see p50 for options - omit for no bands
DS H 1 - 13 - 05 - 20 - 1 - C - SB
Example:
**NOTE
Max entry applies to straight configuration.
when max entry is exceeded, straight configuration
must be ordered as T3 version (see indicator in part
number breakdown).
Shell sizes 09 and 11 only exist in T3 version.
Exceeding max entry also aects dimension D in 45°
configuration (see D’) and rear nut diameter in 45° and
90° configurations (ØB becomes ØB’).
All dimensions in MM unless otherwise stated.
PAGE 22AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
ØB*
A THREAD*
ØG
ØH
C*
E*
K*
F - SEE TABLE 3
D - SEE TABLE 3
L - SEE TABLE 1
E*
K*
F - SEE TABLE 3
STAINLESS STEEL/BRONZE
90° STYLE
ANGLE 1
ANGLE 2 ANGLE 3
CONSTANT FORCE SPRING
See Table 4
J
9,50 ± 0,20
*REFER TO INTERFACE PAGE CLICK HERE
91 Series
Spring Backshell
Tool-free screen termination by stainless steel constant force spring
Sealing and strain relief of backshell by heat shrink boot
Standard range - many sizes available from stock
SPECIFICATIONS
Screen Termination: Overall screen, tool-free, reworkable
Strain Relief & Cable Sealing: Heat shrink boot option
Additional Components Required: Boot
PAGE 23AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
ENTRY
SIZE
ØG
MIN
ØH
MAX SPRING REF
03 4,7 13,9 HE050
04 6,3 13,9 HE050
05 7,9 15,5 HE100
06 9,5 17,2 HE100
07 11,1 18,7 HE100
08 12,7 20,3 HE200
09 14,2 21,9 HE200
10 15,8 23,5 HE200
11 17,4 25,1 HE200
12 19,0 26,7 HE300
13 20,6 28,3 HE300
14 22,2 29,9 HE300
15 23,8 31,5 HE300
16 25,4 33,1 HE300
17 27,0 34,7 HE400
18 28,6 36,3 HE400
19 30,2 37,9 HE400
20 31,8 39,5 HE400
21 33,3 41,1 HE400
22 35,0 42,7 HE400
23 36,5 44,3 HE400
24 38,1 45,9 HE400
SHELL SIZE
INTERFACE
AA
AD/SS D F H K Q S SM Z
03 28,0 32,0 - - - - - - - -
08/09 28,0 32,0 34,0 30,0 30,0 34,0 - 32,0 30,0 -
10/10SL/11 28,0 32,0 34,0 30,0 30,0 34,0 36,0 32,0 30,0 -
12/12S/13 28,0 32,0 34,0 30,0 30,0 34,0 - 32,0 30,0 38,2
14/14S/15 28,0 32,0 34,0 30,0 30,0 34,0 36,0 32,0 30,0 38,2
16/16S/17 28,0 32,0 34,0 30,0 30,0 34,0 36,0 32,0 30,0 38,2
18/19 28,0 32,0 34,0 30,0 30,0 34,0 36,0 32,0 30,0 38,2
20/21 28,0 32,0 34,0 30,0 30,0 34,0 36,0 32,0 30,0 38,2
22/23 28,0 32,0 34,0 30,0 30,0 34,0 36,0 32,0 30,0 38,2
24/25 28,0 32,0 34,0 30,0 30,0 34,0 40,0 32,0 30,0 38,2
28/29 36,0 32,0 - - - - 45,0 - - 38,2
32/33 40,0 40,0 - - - - 50,0 - - -
36 45,0 45,0 - - - - 50,0 - - -
40 50,0 50,0 - - - - - - - -
44 60,0 60,0 - - - - - - - -
48 60,0 60,0 - - - - - - - -
61 28,0 32,0 - - - - - - - -
SHELL SIZE
ALL INTERFACES
D MAX FMAX
03 26,6 29,4
08/09 26,4 31,5
10/10SL/11 29,4 32.7
12/12S/13 27,3 33,7
14/14S/15 30,0 35,5
16/16S/17 30,5 37,4
18/19 30,9 39,0
20/21 31,6 41,6
22/23 32,3 42,1
24/25 32,9 45,1
28/29 34,1 46,1
32/33 35,4 48,6
36 36,3 52,3
40 36,2 54,8
44 37, 8 58,0
48 39,0 61,1
61 31,4 52,1
SPRING REF J MAX
(unconstrained)
HE 050 7,5
HE 100 9,1
HE 200 12,8
HE 300 17,9
HE 400 21,8
Table 1 - Length
Table 2 Table 3
Table 4
91 H 1 - 19 - 08 - 1 - B - HE200
Example:
Series
Connector interface*
Angle
Shell size
Entry size
Material
Finish
Spring Reference
All dimensions in MM unless otherwise stated.
PAGE 24AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
ØB*
A THREAD*
ØG
ØH
C*
D - SEE TABLE 3
L - SEE TABLE 1
E*
K*
F - SEE TABLE 3
E*
K*
F - SEE TABLE 3
STAINLESS STEEL/BRONZE
90° STYLE
ANGLE 1
ANGLE 2 ANGLE 3
150,00 MIN
BRAID TAIL LENGTH
ALUMINIUM / IRIDITE FINISH
MAGNAFORM RING
TINNED COPPER BRAID TAIL
*REFER TO INTERFACE PAGE CLICK HERE
High-reliability low profile magna form ring termination
Sealing and strain relief of backshell by heat shrink boot
Pre-terminated screenbraid sock
SPECIFICATIONS
Screen Termination: Overall Screen, tool free, reworkable
Strain Relief & Cable Sealing: Heat Shrink Boot Option
Additional Components Required: Boot
70 Series
Braid Tail Backshell
PAGE 25AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
ENTRY
SIZE
ØG
MIN
ØH
+/- 0,25
03 4,7 13,1
04 6,3 13,1
05 7,9 13,1
06 9,5 17,9
07 11,1 17,9
08 12,7 17,9
09 14,2 17,9
10 15,8 24,2
11 17,4 24,2
12 19,0 24,2
13 20,6 24,2
14 22,2 30,6
15 23,8 30,6
16 25,4 30,6
17 27,0 33,2
18 28,6 33,2
19 30,2 36,4
20 31,8 42,0
21 33,3 42,0
22 35,0 42,0
23 36,5 42,0
24 38,1 42,0
SHELL SIZE INTERFACE
A D F H K Q S SM Z
03 25,5 - - - - - - - -
08/09 25,5 32,5 25,5 23,5 32,5 -25,9 25,5 -
10/10SL/11 25,5 32,5 25,5 23,5 32,5 36,0 25,9 25,5 30,0
12/12S/13 25,5 32,5 25,5 23,5 32,5 -25,9 25,5 30,0
14/14S/15 25,5 32,5 25,5 23,5 32,5 36,0 25,9 25,5 30,0
16/16S/17 25,5 32,5 25,5 23,5 32,5 36,0 25,9 25,5 30,0
18/19 25,5 32,5 25,5 23,5 32,5 36,0 25,9 25,5 30,0
20/21 25,5 32,5 25,5 23,5 32,5 36,0 25,9 25,5 30,0
22/23 25,5 32,5 25,5 23,5 32,5 36,0 25,9 25,5 30,0
24/25 25,5 32,5 25,5 23,5 32,5 36,0 25,9 25,5 30,0
28/29 36,0 - - - - 36,0 - -30,0
32/33 40,0 - - - - 36,0 - -30,0
36 45,0 - - - - 36,0 - - -
40 50,5 - - - - - - - -
44 50,5 - - - - - - - -
48 50,5 - - - - - - - -
61 28,0 - - - - - - - -
Table 1 - Length
Table 2 Table 3
SHELL SIZE
ALL INTERFACES
D MAX FMAX
03 26,6 29,4
08/09 17,6 25,5
10/11 18,7 25,7
10SL/12/12S/13 19,7 27,2
14/14S/15 20,6 28,7
16/16S/17 21,4 32,3
18/19 22,1 32,4
20/21 22,6 33,6
22/23 26,8 35,1
24/25 27,3 36,6
28/29 27,0 39,9
32/33 27,0 43,1
36 28,8 47,1
40 26,6 49,3
44 28,3 52,5
48 29,5 55,6
61 21,9 36,6
70 H 1 - 17 - 08 - 1 - C
Example:
Series
Connector interface*
Angle
Shell size
Entry size
Material
Finish
All dimensions in MM unless otherwise stated.
PAGE 26AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
ØB*
A THREAD*
ØG
W
C*
E*
K*
F - SEE TABLE 3
L - SEE TABLE 1
E*
K*
F - SEE TABLE 3
J - SEE TABLE 2
D - SEE TABLE 1 J - SEE TABLE 2
ØH
PLAIN NUT
OPTION
M: MINIMUM
CLAMPING
DIAMETER
STAINLESS STEEL/BRONZE
90° STYLE
ANGLE 1
ANGLE 2 ANGLE 3
REAR VIEW
J - SEE TABLE 2
J - SEE TABLE 2
L
*REFER TO INTERFACE PAGE CLICK HERE
95 Series
Braid Trap Backshell
Tool-free 360° screen termination by barrel thread braid trap system
Sealing and strain relief of backshell by heat shrink boot
Cable clamp backshell version also available
SPECIFICATIONS
Screen Termination: Overall screen, tool-free, reworkable
Strain Relief & Cable Sealing: Cable clamp, heat shrink boot option
Additional Components Required: None
PAGE 27AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
ENTRY
SIZE
ØG
MIN
W
MAX
ØH
MAX
J
MAX
M
+/- 0,5
03 4,7 17,3 15,2 14,7 5,8
04 6,3 18,9 15,2 14,7 5,7
05 7,9 20,5 16,8 14,7 6,8
06 9,5 22,1 18,4 14,7 6,9
07 11,1 23,6 20,0 14,7 8,1
08 12,7 25,1 21,6 17,7 8,5
09 14,2 26,8 23,2 1 7,7 9,7
10 15,8 28,4 24,8 17,7 10,4
11 17,4 30,1 26,4 20,7 11,5
12 19,0 31,6 27,9 20,7 11,4
13 20,6 33,1 29,5 20,7 14,0
14 22,2 34,8 31,1 23,7 15,4
15 23,8 36,5 32,7 23,7 16,8
16 25,4 37,9 34,3 23,7 17,3
17 27,0 39,5 35,9 23,7 18,8
18 28,6 41,1 37,5 23,7 19,5
19 30,2 42,7 39,3 25,2 25,9
20 31,8 44,3 40,6 25,2 23,4
21 33,3 45,8 42,2 25,2 24,8
22 35,0 - 43,8 - -
23 36,5 47,4 45,4 25,2 25,4
24 38,1 50,9 47,0 25,2 2 7, 4
SHELL SIZE INTERFACE
A D F H K Q S SM Z
03 28,0 / 28,0 - - - - - - - -
08/09 28,0 / 28,0 39,0 / 34,0 32,0 / 28,0 32,0 / 28,0 38,0 / 34,0 - 28,0 / 28,0 32,0 / 30,0 -
10/10SL/11 28,0 / 28,0 39,0 / 34,0 32,0 / 28,0 32,0 / 28,0 38,0 / 34,0 - 28,0 / 28,0 32,0 / 30,0 30,0 / 38,0
12/12S/13 28,0 / 28,0 39,0 / 34,0 32,0 / 28,0 32,0 / 28,0 38,0 / 34,0 40,0 / 36,0 28,0 / 28,0 32,0 / 30,0 30,0 / 38,0
14/14S/15 28,0 / 28,0 39,0 / 34,0 32,0 / 28,0 32,0 / 28,0 38,0 / 34,0 40,0 / 36,0 28,0 / 28,0 32,0 / 30,0 30,0 / 38,0
16/16S/17 28,0 / 28,0 39,0 / 34,0 32,0 / 28,0 32,0 / 28,0 38,0 / 34,0 40,0 / 36,0 28,0 / 28,0 32,0 / 30,0 30,0 / 38,0
18/19 28,0 / 28,0 39,0 / 34,0 32,0 / 28,0 32,0 / 28,0 38,0 / 34,0 40,0 / 36,0 28,0 / 28,0 32,0 / 30,0 30,0 / 38,0
20/21 28,0 / 28,0 39,0 / 34,0 32,0 / 28,0 32,0 / 28,0 38,0 / 34,0 40,0 / 36,0 28,0 / 28,0 32,0 / 30,0 -
22/23 28,0 / 28,0 39,0 / 34,0 32,0 / 28,0 32,0 / 28,0 38,0 / 34,0 40,0 / 36,0 28,0 / 28,0 32,0 / 30,0 30,0 / 38,0
24/25 28,0 / 28,0 39,0 / 34,0 32,0 / 28,0 32,0 / 28,0 38,0 / 34,0 40,0 / 36,0 28,0 / 28,0 32,0 / 30,0 30,0 / 38,0
28/29 28,0 / 28,0 - - - - 40,0 / 36,0 - - 30,0 / 38,0
32/33 40,0 / 40,0 - - - - 40,0 / 36,0 - - 30,0 / 38,0
36 40,0 / 40,0 - - - - 40,0 / 36,0 - - -
40 40,0 / 40,0 - - - - - - - -
44 40,0 / 40,0 - - - - - - - -
48 40,0 / 40,0 - - - - - - - -
61 40,0 / 40,0 - - - - - - - -
Table 1 - Length
Table 2 Table 3
SHELL SIZE
ALL INTERFACES
D MAX FMAX
03 27,6 34,4
08/09 27,4 33,8
10/11 29,4 35,5
10SL/12/12S/13 28,1 37,0
14/14S/15 30,0 38,6
16/16S/17 30,5 40,2
18/19 32,0 40,9
20/21 31,6 42,5
22/23 33,8 44,1
24/25 34,3 45,6
28/29 34,1 50,3
32/33 35,4 53,6
36 36,3 56,8
40 37,1 59,8
44 38,8 63,0
48 40,0 66,1
61 32,4 47,1
CABLE CLAMP LENGTH / PLAIN NUT LENGTH
95 H 1 - 21 - 12 - 1 - B - CC
Example:
Series
Connector interface*
Angle
Shell size
Entry size
Material
Finish
Cable clamp option (omit for plain nut)
All dimensions in MM unless otherwise stated.
PAGE 28AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
ØB*
A THREAD*
ØG
ØW
C*
E*
K*
F - SEE TABLE 3
D - SEE TABLE 3
L - SEE TABLE 1
E*
K*
F - SEE TABLE 3
J - SEE TABLE 2
ØH
PLAIN NUT
OPTION
M: MINIMUM
CLAMPING
DIAMETER
STAINLESS STEEL/BRONZE
90° STYLE
ANGLE 1
ANGLE 2 ANGLE 3
REAR VIEW
J
J
J
*REFER TO INTERFACE PAGE CLICK HERE
64 Series
Cone Backshell
Individual screen termination using castellated cone
Sealing and strain relief of backshell by heat shrink boot
Cable clamp backshell version also available
SPECIFICATIONS
Screen Termination: Individual or multiple screens, tool-free, reworkable
Strain Relief & Cable Sealing: Cable clamp, heat shrink boot option
Additional Components Required: None
PAGE 29AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
ENTRY
SIZE
ØG
MIN
ØW
MAX
ØH
MAX
J
MAX
M
±0,5
08/09 6,6 20,7 16,0 15,2 7,8
10/11 9,3 23,8 19,0 15,2 8,6
12 /13 12,6 27,0 22,0 15,2 10,2
14/15 14,6 28,6 26,5 15,2 10,4
16/17 17,7 31,8 29,8 15,2 12,4
18/19 19,8 35,0 33,0 18,2 15,4
20/21 23,0 38,1 35,0 18,2 17,3
22/23 26,2 39,7 38,0 18,2 18,8
24/25 29,1 44,5 41,0 18,2 22,4
SHELL SIZE INTERFACE
A D F H K Q S SM
08/09 33,5 37,5 33,5 33,5 37,5 - 32,0 33,5
10/11 33,5 37,5 33,5 33,5 37,5 - 32,0 33,5
10SL/12/12S/13 33,5 37,5 33,5 33,5 37, 5 35,5 32,0 33,5
14/14S/15 33,5 37, 5 33,5 33,5 37,5 35,5 32,0 33,5
16/16S/17 33,5 37,5 33,5 33,5 37, 5 35,5 32,0 33,5
18/19 33,5 37, 5 33,5 33,5 37,5 35,5 32,0 33,5
20/21 33,5 37,5 33,5 33,5 37, 5 35,5 32,0 33,5
22/23 33,5 37,5 33,5 33,5 37, 5 35,5 32,0 33,5
24/25 33,5 37,5 33,5 33,5 37,5 35,5 32,0 33,5
28/29 44,0 - - - - 35,5 - -
32/33 44,0 - - - - 35,5 - -
36 44,0 - - - - 35,5 - -
40 44,0 - - - - - - -
44 44,0 - - - - - - -
48 44,0 - - - - - - -
61 44,0 - - - - - - -
Table 1 - Length
Table 2 Table 3
SHELL SIZE
ALL INTERFACES
D MAX FMAX
08/09 33,6 35,1
10/11 34,4 36,9
10SL/12/12S/13 35,3 38,4
14/14S/15 35,7 39,9
16/16S/17 36,5 41,6
18/19 36,8 43,2
20/21 37, 6 44,8
22/23 38,5 46,3
24/25 38,9 47, 8
28/29 34,6 44,4
32/33 35,9 49,6
36 36,7 52,8
40 34,6 55,8
44 36,3 59,0
48 37, 5 62,1
61 29,9 43,1
NOTE:
Use odd-numbered entry size code when shell
size has an odd number
64 H 1 - 21 - 13 - 1 - C - CC
Example:
Series
Connector interface*
Angle
Shell size
Entry size
Material
Finish
Cable clamp option
All dimensions in MM unless otherwise stated.
PAGE 30AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
ØB*
A THREAD*
ØG
ØH
C*
E*
K*
F - SEE TABLE 1
30,50 MAX
E*
K*
F - SEE TABLE 1
D - SEE TABLE 3
STAINLESS STEEL/BRONZE
90° STYLE
ANGLE 1
ANGLE 2 ANGLE 3
*REFER TO INTERFACE PAGE CLICK HERE
308 Series
Cone Backshell
Screen termination using two overlapping cones
Sealing and strain relief of backshell by heat shrink boot
SPECIFICATIONS
Screen Termination: Overall Screen, Tool-free, Reworkable
Strain Relief & Cable Sealing: Heat Shrink Boot Option
Additional Components Required: Boot
PAGE 31AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
SHELL SIZE
ALL INTERFACES
DMAX FMAX ØGMIN ØHMAX
08/09 33,3 35,2 6,9 18,4
10/10SL/11 34,5 37,0 9,6 22,0
12/12S/13 34,9 38,5 12,7 24,0
14/14S/15 35,8 40,0 14,8 27,0
16/16S/17 36,6 41,2 17,9 29,5
18/19 36,6 43,3 19,9 33,9
20/21 37,7 44,9 23,1 37,0
22/23 38,1 46,4 26,2 40,8
24/25 39,0 47,9 28,8 43,0
Table 1
308 H 1 - 17 - 1 - C
Example:
Series
Connector interface
Angle
Shell size
Material
Finish
All dimensions in MM unless otherwise stated.
PAGE 32AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
ØB*
A THREAD*
ØG
ØH
C*
E*
K*
F - SEE TABLE 3
L - SEE TABLE 1
E*
K*
F - SEE TABLE 3
J - SEE TABLE 2
M: MINIMUM
CLAMPING
DIAMETER
STAINLESS STEEL/BRONZE
90° STYLE
ANGLE 1
ANGLE 2 ANGLE 3
REAR VIEW
J
J
DJ
*REFER TO INTERFACE PAGE CLICK HERE
77 Series
Strain Relief Backshell
Backshell entry sizes to match cable bundle diameter
Extended follower oers protection to rear of connector
SPECIFICATIONS
Screen Termination: None
Strain Relief & Cable Sealing: Cable clamp
Additional Components Required: None
PAGE 33AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
ENTRY
SIZE
ØG
MIN
ØH
MAX
M
±0,5
J
MAX
03 4,7 17,1 6,8 15,0
04 6,3 19,1 6,7 15,0
05 7,9 20,7 7, 8 15,0
06 9,5 22,3 7,9 15,0
07 11,1 23,8 8,6 15,0
08 12,7 25,3 9,0 15,0
09 14,2 27,0 10,2 15,0
10 15,8 28,6 10,4 15,0
11 17,4 30,3 11,5 15,0
12 19,0 31,8 12,4 15,0
13 20,6 33,3 15,0 15,0
14 22,2 35,0 15,4 18,0
15 23,8 36,7 16,8 18,0
16 25,4 38,1 17,3 18,0
18 28,6 39,7 18,8 18,0
20 31,8 44,5 22,4 18,0
22 35,0 47,6 24,4 18,0
24 38,1 51,2 26,4 18,0
SHELL SIZE INTERFACE
A D F H K Q S Z
03 36,0 - - - - - - -
08/09 36,0 36,0 36,0 36,0 36,0 - 36,0 -
10/10SL/11 36,0 36,0 36,0 36,0 36,0 - 36,0 30,0
12/12S/13 36,0 36,0 36,0 36,0 36,0 36,0 36,0 30,0
14/14S/15 36,0 36,0 36,0 36,0 36,0 36,0 36,0 30,0
16/16S/17 36,0 36,0 36,0 36,0 36,0 36,0 36,0 30,0
18/19 36,0 36,0 36,0 36,0 36,0 36,0 36,0 30,0
20/21 36,0 36,0 36,0 36,0 36,0 36,0 36,0 30,0
22/23 36,0 36,0 36,0 36,0 36,0 36,0 36,0 30,0
24/25 36,0 36,0 36,0 36,0 36,0 36,0 36,0 30,0
28/29 36,0 - - - - 36,0 - 30,0
32/33 40,0 - - - - 36,0 - 30,0
36 45,0 - - - - 36,0 - -
40 50,5 - - - - - - -
44 50,5 - - - - - - -
48 50,5 - - - - - - -
61 28,0 - - - - - - -
SHELL SIZE
ALL INTERFACES
D MAX FMAX
03 25,1 26,4
08/09 24,6 26,4
10/10SL/11 30,5 38,3
12/12S/13 26,2 28,3
14/14S/15 31,5 29,8
16/16S/17 33,0 33,4
18/19 34,0 33,5
20/21 35,5 34,7
22/23 36,5 36,4
24/25 38,0 40,9
28/29 39,0 40,0
32/33 40,5 45,6
36 41,5 48,8
40 43,0 51,8
44 36,3 55,0
48 37, 5 58,1
61 29,9 39,1
Table 1 - Length
Table 2 Table 3
77 H 1 - 17 - 08 - 1 - C
Example:
Series
Connector interface*
Angle
Shell size
Entry size
Material
Finish
All dimensions in MM unless otherwise stated.
PAGE 34AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
ØB*
A THREAD*
ØG
ØH
C*
E*
K*
F
Q
E*
K*
N
D
STAINLESS STEEL/BRONZE
90° STYLE
ANGLE 1
ANGLE 2 ANGLE 3
M
6,35
L
L
FL
*REFER TO INTERFACE PAGE CLICK HERE
KMA Series
Mesh Tape Backshell
360° termination of multiple individual screens
Mesh tape bundle system creates windowless EMI barrier
even without overall screenbraid
Sealing and strain relief of backshell by heat shrink boot
SPECIFICATIONS
Screen Termination: Overall Screen, Individual or Multiple
Screens, Tool-free, Reworkable
Strain Relief & Cable Sealing: Heat Shrink Boot Option
Additional Components Required: Boot
PAGE 35AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
SLOT OPTION L
±0,5
M

N
±0,25
MESH-TAPE PART NUMBER
(ORDERED SEPARATELY- 25 M REEL)
S1 26,5 12,0 19,5 KM (6)
S2 34,5 20,0 27,5 KM (13)
Table 1
Table 2
SHELL SIZE
ALL INTERFACES
DMAX FMAX ØGMIN ØHMAX
08/09 14,5 21,5 6,6 13,2
10/11 15,0 23,0 9,3 16,7
10SL/12/12S/13 15,5 24,5 12,8 20,0
14/14S/15 16,0 28,5 14,7 22,7
16/16S/17 17,0 30,0 17,8 25,4
18/19 18,0 31,5 19,5 28,3
20/21 18,5 33,0 21,9 31,6
22/23 19,0 34,5 25,2 34,7
24/25 19,5 36,0 28,3 37,9
Table 3
INTERFACE A D F H K S SM
Q DIMENSION 8,5 11,0 7,0 7,0 11,0 11,0 7,0
KMA H 1 - 11 - 1 - B - S1 - HE
Example:
Series
Connector interface*
Angle
Shell size
Material
Finish
Slot Option
Termination option
HE - Constant force spring, omit for supplied without spring
All dimensions in MM unless otherwise stated.
PAGE 36AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
ØG
H
NLC
M
6,35
C*
D
E*
K*
F
E*
K*
F
STAINLESS STEEL/BRONZE
90° STYLE
ANGLE 2 ANGLE 3
ANGLE 1
ØB*
A THREAD*
Q
LLC
LC L
LC L
*REFER TO INTERFACE PAGE CLICK HERE
KMCC Series
Mesh Tape Backshell
360° termination of multiple individual screens
Mesh tape bundle system creates windowless EMI barrier even without
overall screenbraid
Strain relief by cable clamp allows tool free assembly and re-work
SPECIFICATIONS
Screen Termination: Overall Screen, Individual or Multiple Screens,
Tool-free, Reworkable
Strain Relief & Cable Sealing: Cable Clamp
Additional Components Required: None
PAGE 37AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
SLOT OPTION L
±0,5
M

N

MESH-TAPE PART NUMBER
(ORDERED SEPARATELY- 25 M REEL)
S1 26,5 12,0 19,5 KM (6)
S2 34,5 20,0 27,5 KM (13)
Table 1
Table 2
SHELL SIZE
ALL INTERFACES
DMAX FMAX ØGMIN HMAX LC MAX
08/09 14,5 21,5 6,6 13,2 14,0
10/11 15,0 23,0 9,3 16,7 14,0
10SL/12/12S/13 15,5 24,5 12,8 20,0 14,0
14/14S/15 16,0 28,5 14,7 22,7 14,0
16/16S/17 17,0 30,0 17,8 25,4 14,0
18/19 18,0 31,5 19,5 28,3 1 7,0
20/21 18,5 33,0 21,9 31,6 21,0
22/23 19,0 34,5 25,2 34,7 21,0
24/25 19,5 36,0 28,3 37, 9 21,0
Table 3
INTERFACE A D F H K S SM
DIMENSION Q 8,5 11,0 7,0 7,0 11,0 11,0 7,0
KMCC H 1 - 11 - 1 - C - S2 - HE
Example:
Series
Connector interface*
Angle
Shell size
Material
Finish
Slot Option
Termination option
HE - Constant force spring, omit for supplied without spring
All dimensions in MM unless otherwise stated.
PAGE 38AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
ØB*
A THREAD
L
NO O-RING ON A INTERFACE
NO TEETH ON K INTERFACE
*REFER TO INTERFACE PAGE CLICK HERE
76 Series
Heat Shrink Boot Backshell
Low profile backshell for heat shrink boot
SPECIFICATIONS
Screen Termination: None
Strain Relief & Cable Sealing: Heat Shrink Boot Option
Additional Components Required: Boot
A-A
PAGE 39AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
SHELL SIZE INTERFACE
A D F H K Q S SM
03 13,7 - - - - - - -
08/09 13,7 17,0 11,0 12,0 16,5 - 9,8 11,0
10/10SL/11 13,7 17,0 11,0 12,0 16,5 - 9,8 11,0
12/12S/13 13,7 17,0 11,0 12,0 16,5 12,5 9,8 11,0
14/14S/15 13,7 17,0 11,0 12,0 16,5 12,5 9,8 11,0
16/16S/17 13,7 17,0 11,0 12,0 16,5 12,5 9,8 11,0
18/19 13,7 17,0 11,0 12,0 16,5 12,5 9,8 11,0
20/21 13,7 17,0 11,0 12,0 16,5 12,5 9,8 11,0
22/23 13,7 17,0 11,0 12,0 16,5 12,5 9,8 11,0
24/25 13,7 17,0 11,0 12,0 16,5 12,5 9,8 11,0
28/29 13,7 - - - - 12,5 - -
32/33 13,7 - - - - 12,5 - -
36 13,7 - - - - 12,5 - -
40 13,7 - - - - 12,5 - -
44 13,7 - - - - - - -
48 13,7 - - - - - - -
61 13,7 - - - - - - -
Table 1 - Length
76 A 1 - 14 - 1 - ZB
Example:
Series
Connector interface*
Angle
Shell size
Material
Finish
All dimensions in MM unless otherwise stated.
PAGE 40AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
STAINLESS STEEL/BRONZE
90° STYLE
ANGLE 2 ANGLE 3
ANGLE 1
ØB*
A THREAD*
L
R THREAD
C*
D
10,00
E*
K*
E*
K*
F
10,00
F
10,00
*REFER TO INTERFACE PAGE CLICK HERE
PG Adaptor
Thread Adaptor
To convert from military connector to PG threaded
accessory
SPECIFICATIONS
Screen Termination: n/a
Strain Relief & Cable Sealing: n/a
Additional Components Required: n/a
PAGE 41AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
PG SIZE R THREAD
7 PG7
9 PG9
11 PG11
13.5 PG13.5
16 PG16
21 PG21
29 PG29
36 PG36
42 PG42
48 PG48
Table 1 Table 2
SHELL SIZE
ALL INTERFACES
D MAX FMAX
MAXPG
THREAD*
(ANGLES&)
03 22,0 21,9 9
08/09 22,5 21,9 9
10/10SL/11 23,0 23,4 9
12/12S/13 23,5 25,4 11
14/14S/15 24,0 27, 4 13,5
16/16S/17 25,0 29,4 16
18/19 26,0 30,9 21
20/21 26,5 31,4 21
22/23 27,0 32,9 29
24/25 27,5 34,9 29
28 28,0 37,9 29
32 29,0 41,4 29
36 30,0 44,4 36
40 31,0 47,9 36
44 32,0 51,4 36
48 33,0 54,4 42
61 34,0 36,4 29
*NOTE:
Contact TE for thread sizes outside this range
PGF H 1 - 17 - 16 - 1 - B - L25
Example:
Series
Connector interface*
Angle
Shell size
PG Size
Material
Finish
Length in MM Straight Only
(5mm Increments, L25 min)
All dimensions in MM unless otherwise stated.
PAGE 42AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
POLAMCO
STAINLESS STEEL/BRONZE
90° STYLE
ANGLE 2 ANGLE 3
ANGLE 1
C*
E*
K*
F
D
E*
K*
F
ØB*
A THREAD*
L
A THREAD*
*REFER TO INTERFACE PAGE CLICK HERE
DC Series
Backshell Extender
Extends termination area
Houses ancillary components such as fuses and
service loops
SPECIFICATIONS
Screen Termination: n/a
Strain Relief & Cable Sealing: n/a
Additional Components Required: n/a
PAGE 43AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
Table 1 - Length
SHELL SIZE
All Interfaces
D MAX FMAX
03 - -
08/09 15,3 21,5
10/10SL/11 15,8 23,0
12/12S/13 16,8 24,5
14/14S/15 17,8 28,5
16/16S/17 18,3 30,0
18/19 18,8 31,5
20/21 19,3 33,0
22/23 18,8 34,5
24/25 20,5 36,0
28/29 22,2 36,2
32/33 23,9 39,6
36 25,6 44,1
40 27,3 50,0
44 29,0 43,0
48 30,7 44,7
61 20,8 34,8
DC H 1 - 17 - 1 - B - L25
Example:
Series
Connector interface*
Angle
Shell size
Material
Finish
Length in MM
(5mm Increments, L20min - straight only)
All dimensions in MM unless otherwise stated.
PAGE 44AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
Raychem
ØB*
A THREAD*
ØS
ØY
C*/F**
L - SEE TABLE 1
ØZ
STAINLESS STEEL/BRONZE
90° STYLE
ANGLE 45 ANGLE 90
ANGLE 00 31,0 MAX 26,50
31,0 MAX 31,0 MAX
31,0 MAX
D/G**
E*/H**
K*/M**
P/J **
E*/H**
K*/M**
P/J **
TYPE 2 ADAPTOR SUPPLIED WHEN
MAX ENTRY IS EXCEEDED
** F, G, H, M, & J APPLY WHEN ASSEMBLY IS TYPE 2
*REFER TO INTERFACE PAGE CLICK HERE
TXR Backshell
Tinel (Memory) Ring Backshell
Low profile 360° screen termination by a heat shrink
memory metal ring
Sealing and strain relief of backshell by heat shrink boot
SPECIFICATIONS
Screen Termination: Overall Screen
Strain Relief & Cable Sealing: Heat Shrink Boot Option
Additional Components Required: Boot
PAGE 45AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
ENTRY
SIZE
ØZ
MIN ØSØY
± 0,3
F
MAX
G
MAX
H
MAX
M
MAX
J
MAX
04 6,35 9,49 14,00 NA NA NA NA NA
05 7,92 11,06 15,50 13,0 28,0 24,8 17,7 28,7
06 9,53 12,66 17,10 13,0 28,0 24,8 1 7,7 28,7
07 11,10 14,21 18,70 13,0 28,0 24,8 17,7 28,7
08 12,70 15,81 20,30 13,6 28,5 28,8 19,9 30,2
10 15,88 18,96 23,50 14,0 29,5 31,6 21,5 31,7
12 19,05 22,14 26,70 15,0 30,2 34,7 23,3 33,4
14 22,23 25,30 29,80 16,0 31,0 39,0 25,8 35,0
16 25,40 28,48 33,00 16,6 31,4 41,2 26,6 36,6
18 28,58 31,65 36,20 17,0 31,6 44,2 28,1 38,1
20 31,75 34,83 39,40 17,5 32,6 46,9 29,6 39,6
22 34,93 37,98 42,50 19,0 35,8 55,0 31,5 42,5
24 38,10 41,15 45,70 22,4 38,6 58,5 33,5 46,5
SHELL SIZE
INTERFACE
40 MAX
ENTRY 54 MAX
ENTRY 41 MAX
ENTRY  MAX
ENTRY  MAX
ENTRY 78 MAX
ENTRY 79 MAX
ENTRY 30 MAX
ENTRY
03 - - 26,0 04 - - - - - - - - - - - -
08 27,0 04 26,0 04 27,3 04 30,9 04 36,9 04 - - 27, 3 05 - -
10/11 27,0 07 26,0 06 27,3 07 30,9 06 36,9 06 - - 2 7, 3 07 30,5 05
12/13 27,0 08 26,0 08 27,3 08 30,9 08 36,9 08 32,0 05 2 7, 3 08 30,5 08
14/15 27,0 10 26,0 08 2 7, 3 10 30,9 10 36,9 10 32,0 07 27,3 10 30,5 10
16/17 27,0 12 26,0 10 27,3 12 30,9 12 36,9 12 36,8 08 27,3 12 30,5 12
18/19 27,0 14 26,0 12 27,3 14 30,9 12 36,9 14 36,8 10 27,3 14 30,5 14
20 27,0 16 26,0 14 27, 3 16 30,9 14 36,9 16 38,9 12 27,3 16 - -
22/23 27,0 18 26,0 16 27, 3 18 30,9 16 36,9 18 38,9 14 27, 3 18 30,5 16
24/25 27,0 20 26,0 18 27,3 20 30,9 18 36,9 18 41,2 16 27,3 20 30,5 18
28/29 - - 26,0 22 - - - - - - 41,2 18 - - 30,5 22
32/33 - - 26,0 24 - - - - - - 44,7 22 - - 30,5 24
36 - - 26,0 28 - - - - - - 44,7 24 - - - -
40 - - 26,0 28 - - - - - - - - - - - -
44 - - 26,0 28 - - - - - - - - - - - -
48 - - 26,0 28 - - - - - - - - - - - -
61 - - 26,0 18 - - - - - - - - - - - -
ORDER NUMBER
D
MAX
P
MAX
54 41 21 76 78 79 40 30
03 27,5 26,4
08 08 08 08 08 08 27,3 26,9
10 10 10 10 12 10 10 11 28,0 38,7
12 12 12 12 12 12 13 28,5 30,2
14 14 14 14 14 14 14 15 29,5 31,7
16 16 16 16 16 16 16 17 30,2 33,4
18 18 18 18 18 18 18 19 31,5 35,0
20 20 20 20 20 20 20 31,4 36,6
22 22 22 22 22 22 22 23 31,6 38,1
24 24 24 24 24 24 24 25 32,7 39,6
28 28 29 35,8 45,8
32 32 33 38,6 48,3
36 36 31,2 48,9
40 32,5 51,9
44 34,2 55,1
48 35,4 58,2
61 27,1 39,2
Table 1 - Max Length & Max Entry
Table 2 Table 3
TXR54 A B 00 - 16 10 AI
Adapter family*
Material
Finish
Angle (00 = straight; 45 = 45°; 90 = 90°)
Manufacturers prefix (connector code 18 only)
Order number
Entry size
Ring designator
AI - to suit single braid
BI - to suit double braid
Example:
All dimensions in MM unless otherwise stated.
PAGE 46AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
Raychem
ANGLE 45 ANGLE 90
ANGLE 00
ØB*
A THREAD*
C*
K*
F - SEE TABLE 3
D - SEE TABLE 3
L - SEE TABLE 1
ØH
REAR VIEW
*REFER TO INTERFACE PAGE CLICK HERE
HexaShield Backshell
360° Screening Backshell
Strain relief on each individual cable
Compact size not exceeding outer diameter of connector
No degradation of shielding performance
SPECIFICATIONS
Screen Termination: 360° Screening
Strain Relief & Cable Sealing: n/a
Additional Components Required: See note 4, p47
PAGE 47AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
SHELL SIZE
ORDER NUMBER
54  40 21 ØH
MAX
D
MAX
F
MAX STANDARD OPTIONAL
08/09 09 09 09 08 17,5 25,5 29,0 1 -
10/11 11 11 11 10 21,5 26,0 30,5 2 -
12/13 13 13 13 12 22,5 26,5 32,0 3 -
14/15 15 15 15 14 25,5 2 7, 5 33,5 5 -
16/17 17 17 17 16 28,5 28,0 35,0 6 7
18/19 19 19 19 18 31,5 28,5 36,5 7 -
20/21 21 21 21 20 35,0 29,0 38,5 9 11
22/23 23 23 23 22 38,0 30,0 40,0 10 13
24/25 25 25 25 24 41,0 31,0 41,5 12 17
SHELL SIZE ORDER NUMBER
54  40 21
08/09 25,0 25,0 25,0 36,0
10/11 25,0 25,0 25,0 36,0
12/13 25,0 25,0 25,0 36,0
14/15 25,0 25,0 25,0 36,0
16/17 25,0 25,0 25,0 36,0
18/19 25,0 25,0 25,0 36,0
20/21 25,0 25,0 25,0 36,0
22/23 25,0 25,0 25,0 36,0
24/25 25,0 25,0 25,0 36,0
Table 1 - Length
Table 3
ITEM DESCRIPTION MATERIALCODE
A K S
1 BODY ASSEMBLY ALUMINIUM ALLOY STAINLESS STEEL NUT - STAINLESS STEEL
BODY - ALUMINIUM ALLOY
2 CLAMPING NUT - PLAIN ALUMINIUM ALLOY STAINLESS STEEL ALUMINIUM ALLOY
3 CONIC RING ALUMINIUM ALLOY STAINLESS STEEL ALUMINIUM ALLOY
4 STAR ALUMINIUM ALLOY STAINLESS STEEL ALUMINIUM ALLOY
NOTES:
1. Star is not supplied with HexaShield order number 09/08
2. The DS option is for a drilled star which is available on sizes 14 to 25 only, this option is to allow unshielded wires
to pass through the assembly
3. If optional ferrule quantity is selected then 2 stars will be supplied - an outer “split” star and an inner solid star
4. Use in conjunction with the ferrules HET-A-0xx, which are purchased separately
Table 2
HEX40 - K - C - 00 - 21 - A9 - 1 - DS
Example:
Connector code number:*
HEX40 = MIL-C-38999 Series III and IV
Material
Finish
C - Electroless nickel to MIL-C-26074
B - Cadmium olive drab over electroless
nickel to QQ-P416
Body Style
(00 = straight; 45 = 45°; 90 = 90°)
Order number
Ferrule quantity code
Back end option
1 = Plain clamping nut
DS = Drilled star (optional, see note 2)
All dimensions in MM unless otherwise stated.
PAGE 48AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
MODIFICATION
SHELL SIZE AllInterfaces
D MAX FMAX RMAX MAXENTRY
08/09 18,7 22,5 8,7 04
10/11 21,7 26,6 10,0 06
12/13 24,7 26,6 11,0 08
14/15 24,7 30,4 11,6 08
16/17 28,7 32,7 13,6 10
18/19 28,7 35,4 13,6 10
20/21 28,7 36,4 13,6 10
22/23 31,7 38,9 15,1 12
24/25 31,7 40,4 15,1 12
A D F H
KC KC KC KC
08/09 10,3 7,9 8,7 8,7
10/11 10,3 7,9 8,7 8,7
12/13 10,3 7,9 8,7 8,7
14/15 11,8 9,4 10,2 10,2
16/17 12,8 10,4 11,2 11,2
18/19 12,8 10,4 11,2 11,2
20/21 12,8 10,4 11,2 11,2
22/23 14,3 11,9 12,7 12,7
24/25 14,3 11,9 12,7 12,7
SHELL SIZE
INTERFACE
R
KC
F
ØB*
A THREAD*
ØD
TERMINATION OPTIONS
SEE NEXT PAGE
*REFER TO INTERFACE PAGE CLICK HERE
Cobra Head
Backshell Modification
Low profile backshell form
Designed for use with heat shrink boot
Modular design for ease of cable assembly
Can be used on many standard range backshells
(see opposite page for details)
Please consult TE for interfaces that are not listed
PAGE 49AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
ENTRY
SIZE
ØG
MIN
ØM
MAX
ØH
MAX
04 6,4 9,5 14,3
05 7,9 11,1 15,8
06 9,5 12,7 17,4
07 11,1 14,3 19,0
08 12,7 15,9 20,6
10 15,9 19,1 23,8
12 19,1 22,2 27,0
ENTRY
SIZE
ØG
MIN
ØH
MAX
03 4,77 20,2
04 6,35 21,8
05 7,92 23,4
06 9,52 25,0
07 11,10 26,5
08 12,70 28,0
09 14,27 29,7
10 15,88 31,3
11 17,47 33,0
12 19,05 34,6
ENTRY
SIZE
ØG
MIN
03 4,77
04 6,35
05 7,92
06 9,52
07 11,10
08 12,70
09 14,27
10 15,88
11 17,47
12 19,05
ENTRY
SIZE
ØG
MIN
ØH
MAX
ØW
MAX J
03 4,77 15,2 17,3 13,7
04 6,35 15,2 18,9 13,7
05 7,92 16,8 20,5 13,7
06 9,52 18,4 22,1 13,7
07 11,10 20,0 23,6 13,7
08 12,70 21,6 25,1 16,7
09 14,27 23,2 26,8 16,7
10 15,88 24,8 28,4 16,7
11 17,47 26,4 30,1 19,7
12 19,05 27,9 31,6 19,7
ENTRY
SIZE
ØG
MIN
ØH
MAX
03 4,77 13,1
04 6,35 13,1
05 7,92 13,1
06 9,52 17,9
07 11,10 17,9
08 12,70 17,9
09 14,27 17,9
10 15,88 24,2
11 17,47 24,2
12 19,05 24,2
ENTRY
SIZE
ØG
MIN
ØH
MAX
03 4,7 17,1
04 6,3 19,1
05 7,9 20,7
06 9,5 22,3
07 11,1 23,8
08 12,7 25,3
09 14,2 27,0
10 15,8 28,6
11 17,4 30,3
12 19,0 31,8
ENTRY
SIZE
ØG
MIN
ØH
MAX
03 4,77 9,4
04 6,35 11,0
05 7,92 12,6
06 9,52 14,0
07 11,10 15,7
08 12,70 1 7,0
09 14,27 19,9
10 15,88 20,4
11 17,47 22,1
12 19,05 23,6
ØG
ØM
ØH
ØG
ØH
ØG
ØG
ØH
ØW
J
ØG
ØH
ØG
ØH
ØG
ØH
60 Series
88 Series
34 Series
95 Series
70 Series
BT/91 Series
77 Series
23,40 ± 0,50
32,20 ± 0,5012,50 MAX
24,76 ± 0,50
22,76 ± 0,50
14,50 MAX
22,20 ± 0,50
26,20 ± 0,50
26,20 ± 0,50 20,20 ± 0,5018,00 MAX
19,70 ± 0,50
150MM
MIN BRAID
TAIL
All dimensions in MM unless otherwise stated.
PAGE 50AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
ACCESSORY
MICROBANDTWO-STEP BAND STANDARD BAND
FLAT BAND - CONFIGURATION 1, 3, 7
M85049/128-1 FLAT
M85049/128-2 PRE-COILED
M85049/128-3 FLAT
M85049/128-4 PRE-COILED
M85049/128-7 FLAT
M85049/128-8 PRE-COILED
B
E
A
F
C
TAIL LENGTH INDICATOR APPLIES ONLY TO
CONFIGURATION 3 & 7
D
M85049/128 Band Straps
Backshell Accessory
Meets AS85049 NAVAIR standards
Self-coupling locking nut provides an improved
mechanical protection against loosening under
vibration
Corrosion resistant stainless steel
Band straps available flat or precoiled
PAGE 51AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
CONFIGURATION A
± ,06
B
± ,031
C
± ,010
D
± ,003
E
± ,015
F
REF
G
MAX
H
REF SUFFIX TOOL
REQUIRED
1 358,90 8,33 6,22 0,48 2,54 - - - - M81036/2-01
2 - - - - - - 3,56 44,5 -S2 M81036/2-01
3 361,95 8,89 6,22 0,48 1,88 51,59 - - - M81036/1-01
4 - - - - - - 3,81 44,5 -SB M81036/1-01
7 206,25 4,95 2,92 0,38 1,35 51,59 - - - M81036/1-02
8 - - - - - - 1,85 21,8 -MB M81036/1-02
PRE-COILED BAND
CONFIGURATION 2
PRE-COILED BAND
CONFIGURATION 4, 8
G
G
H
H
M85049/128 - 1
Example:
Series
Configuration
INTERFACE DIMENSION TABLE ON REVERSE OF THIS PAGE
PAGE 52AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
A F - K D SM Q - S H - Z A
THREAD
ØB
MAX
C
MAX
K
MAX
E
MAX
54 - 41    - 78 79 - 40 30
08/09 08 08 08 08 08 7/16-28 UNEF 19,3 16,9 21,8 2 7, 5
09 08 M12 x 1.0 19,0 14,6 18,5 25,7
08 1/2 - 20 UNF 16,0 17,1 18,5 24,7
03 10/11 10 10 10 10 10 9/16-24 UNEF 22,0 17,7 24,6 31,0
11 10 M15 x 1.0 22,0 15,2 19,6 26,7
10 10SL 12 5/8-24 UNEF 22,0 17,0 19,3 26,7
12/13 12 12 12 12 12 11/16-24 UNEF 25,5 18,1 25,0 34,0
13 12 M18 x 1.0 25,5 16,0 21,1 31,2
12 14S 14 11 3/4 - 20 UNEF 26,5 20,2 22,9 31,7
14/15 14 14 14 14 14 13/16-20 UNEF 30,5 19,0 26,5 37,0
15 14 M22 x 1.0 30,5 16,2 25,0 37, 2
14 16/16S 16 13 7/8-20 UNEF 30,0 24,4 26,0 36,2
16/17 16 16 16 16 16 15/16-20 UNEF 33,5 19,7 28,2 40,4
17 16 M25x1.0 33,5 1 7,0 27, 2 40,2
16 18 18 15 1-20 UNEF 33,0 25,1 27,5 39,2
18 18/19 18 18 18 18 18 1 1/16-18 UNEF 37,0 20,1 29,8 43,6
19 18 M28 x 1.0 37,0 17,5 27, 5 44,7
20 20 17 1 1/8-18 UNEF 35,5 25,6 28,5 42,2
20 20/21 20 20 20 20 20 1 3/16-18 UNEF 38,5 20,9 31,4 46,8
21 20 M31 x 1.0 38,5 18,5 31,0 49,2
22 22 19 1 1/4-18 UNEF 38,7 26,4 30,0 45,2
22 22/23 22 22 22 22 22 1 5/16-18 UNEF 42,0 21,3 37,1 49,8
23 22 M34x1.0 42,0 19,1 32,0 51,7
24 24 1 3/8-18 UNEF 41,3 27, 6 31,5 48,2
24 24/25 24 24 24 24 24 23 1 7/16-18 UNEF 46,5 22,6 34,4 52,8
25 24 M37 x 1.0 46,5 19,3 30,5 53,2
61 1 1/2-18 UNEF 42,0 22,3 28,5 48,0
25 1 9/16- 18UNEF 47, 2 23,6 32,0 51,5
28 28 1 5/8-18 UNEF 47,8 29,3 36,0 55,3
28 1 3/4-18 UNS 50,0 23,5 35,7 54,4
32 32 29 1 7/8-16 UN 55,2 30,2 37,5 60,3
32 2-18 UNS 56,3 25,2 36,9 62,5
36 36 33 2 1/16-16 UNS 62,2 31,7 39,5 64,2
36 2 1/4-16 UN 62,7 26,4 38,5 67,4
40 2 1/2-16 UN 69,0 28,8 41,5 73,4
44 2 3/4-16 UN 75,4 30,3 44,6 79,7
48 3-16 UN 81,7 31,5 47,7 86,0
Interface Dimension Table
Shell Size
Interface Code
For AD modification add 4,0 to ØB, C, K and E dimensions
All dimensions in MM unless otherwise stated.
POLAMCO
Raychem
CLICK TO RETURN TO PREVIOUS PAGE
PAGE 53AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
CIRCULAR BACKSHELLS
Glossary of Terms
Anti-decoupling
Anti-decoupling backshells
incorporate a ratchet in the nut
to help reduce the possibility of
the backshell decoupling from the
connector due to extreme vibration
and shock.
Arctic grip
A deep square-form grip, alternative
to a knurled grip, particularly on
protective covers.
Backshell
Any accessory fitted to the rear
thread of a connector, providing
strain relief, screen termination and/
or cable sealing.
Blanking Cover
Helps to provide environmental
protection and EMC shielding to
circuitry or shorting loops at the rear
of a connector that is to be used as a
stand-alone device.
Cobra Head
Low profile split 90° adaptor.
Conduit
Flexible corrugated tubing that
provides environmental protection for
wiring. Can be used in conjunction
with screenbraid and conduit adaptor
backshells to provide a fully screened
and sealed system.
Connector
Device for electrically connecting
wires to each other or to electrical
equipment.
Direct-coupling
Direct-coupling backshells do not
have a distinct nut, i.e. the entire
backshell rotates when the backshell
is screwed into place.
Dummy Receptacle
Provides stowage, environmental
protection, and EMC shielding for an
unmated plug.
EMC
Electromagnetic Compatibility
assures the avoidance of interference
eects resulting from the
unintentional generation, propagation
and reception of electromagnetic
energy. This can be achieved
by properly grounded shielding
(screening) or by electronically
filtering signals (Filter Connector).
Entry size
Two digits describe the diameter of
the hole through which the cable
enters into the backshell. Check
specific series for details – note that
some series such as boot adaptors
(97 series) and cable clamps (96
series) do not require the entry size
to be stated.
Follower
Refers to the main body of a spin-
coupling backshell.
Heat shrink boot
Molded sleeve that joins the cable
jacket to a suitable backshell,
for purposes of strain-relief and
environmental protection. Heat
shrink boots shrink to fit and are
installed by use of a specialised hot
air gun. Adhesive-lined boots and a
variety of materials are available.
Heat shrink kit
Backshell with pre-installed heat-
shrink boot and optional (internal)
overall screen. Enables easy
installation whereby boot and 360°
screen termination are achieved in
one operation by use of hot air gun.
Individual screen
EMC shield (e.g. screenbraid)
encompassing an individual wire in a
bundle.
Lacing Tape
Lacing cord used as a binding
medium to indicate an EMC
classification of an open wiring
harness.
Overall screen
EMC shield (e.g. screenbraid)
encompassing entire wire bundle.
Protective Cover
Provides environmental protection
and EMC shielding on the front
(mating end) of an unmated
connector.
RoHS
The RoHS Directive bans the placing
on the EU market of new electrical
and electronic equipment containing
more than agreed levels of lead,
cadmium, mercury, hexavalent
chromium, polybrominated biphenyl
(PBB) and polybrominated diphenyl
ether (PBDE) flame retardants.
Screenbraid
Flexible EMC shield in expanding
sleeve form for covering cable.
Shell size
Two numerical digits that state the
size of the connector.
Shield
See EMC
Spin-coupling
Spin-coupling backshells have a
coupling nut that rotates freely on the
backshell body.
Strain relief
Any method of relieving the strain
on the individual wires, should the
cable be put under tension. Common
methods are cable clamps, heatshrink
boots, tie posts.
te.com/polamco
TE, TE connectivity, TE Connectivity (logo), POLAMCO, Raychem are trademarks. All other logos, products and/or
company names referred to herein might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration
purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or
completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be
as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will
TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use
or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the
suitability of each such product for the specific application.
© 2017 TE Connectivity. All Rights Reserved.
1-1773922-505/17 Original
AEROSPACE, DEFENSE & MARINE /// CIRCULAR BACKSHELLS
LET’S CONNECT
We make it easy to connect with our experts and are ready to
provide all the support you need. Just call your local support number or visit
www.te.com/industrial to chat with a Product Information Specialist.
Technical Support
te.com/support-center
North America +1 800 522 6752
North America (Toll) +1 717 986 7777
EMEA/South Africa +800 0440 5100
EMEA (Toll) +31 73 624 6999
India (Toll-Free) +800 440 5100
Asia Pacific +86 400 820 6015
Japan 044 844 8180
Australia +61 2 9554 2695
New Zealand +64 (0) 9 634 4580