HM56 Electrical / Environmental * Operating Temperature Range * DCR Tolerance * Operating Frequency -40C to +125C 5 % Up to 3 MHz High Current Low Loss Ferrite Cube Inductors S RomHpliant Co Schematic Specifications @ 25C Part Number HM56-10100R15LF HM56-11120R19LF HM56-11120R22LF HM56-11120R36LF HM56-11120R4LF HM56-11120R6LF HM56-11121R0LF HM56-11121R3LF HM56-11121R5LF HM56-11122R0LF HM56-11123R0LF HM56-13131R2LF HM56-14138R0LF Notes: Inductance 100 kHz, 0.1 V Irated (1) @ 0 Adc @ Irated H 15% H Typ. (Adc) 0.15 0.19 0.22 0.37 0.40 0.60 1.00 1.30 1.50 2.00 3.00 1.20 8.00 0.14 0.18 0.20 0.36 0.39 0.54 0.90 1.25 1.45 1.90 2.80 1.00 7.00 68 75 60 58 50 30 28 25 24 20 18 20 3.5 Heating(2) Current (Adc) Isat (3) (Adc) DCR (mW) 5% Dim. D (mm) Dim. E (mm) Leads Dim. F (mm Typ.) Fig. 39 45 45 37 37 37 23 23 17 17 12 34 16 100 100 90 77 73 50 37 35 30 27 22 35 7 0.60 0.55 0.55 0.80 0.80 0.80 2.00 2.00 3.65 3.65 7.50 1.30 6.30 5.5 5.0 5.0 5.0 5.0 5.0 5.4 5.4 6.0 5.7 6.0 7.5 9.0 5.0 6.0 6.0 6.0 6.0 6.0 6.6 6.6 7.0 6.9 7.0 7.5 8.0 1.40 1.45 1.45 1.45 1.45 1.45 1.20 1.20 0.90 0.90 0.72 1.45 0.90 1 1 1 1 1 1 1 1 1 1 1 2 2 (1) The rated current, Irated, is the approximate DC current at which inductance will be decreased by 5% typical from its initial (zero DC) value. (2) The heating current is the DC current which causes the component temperature to increase by approximately 40C. (3) Isat is the saturation current at which inductance rolls off approximately 30% from its initial (zero DC) value. Outline Dimensions (mm) 46 MAGNETIC COMPONENTS SELECTOR GUIDE 2009/10 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com Electrical Characteristics @ 25C Packaging Standard: Tray Quantity Per Tray = 50 Units Quantity Per Carton = 650 Units Ordering Information Model Series HM56 - 1112 Case Size : 11 -- (First 2 digits) Width Dimension 12 -- (Last 2 digits) Length Dimension www.bitechnologies.com 0R6 LF Lead-Free Inductance Code 2009/10 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE We reserve the right to change specifications without prior notice. 47