BCM6348 (R) BCM6348 SINGLE-CHIP ADSL2+ CPE CHIP SUMMARY OF BENEFITS FEATURES * Single-chip ADSL2+ CPE device with integrated CPU, transceiver and AFE * Unmatched integration greatly reduces bill of materials cost to enable lowest possible product cost for worldwide deployment of ADSL modems, routers, and gateways * High-resolution A/D and D/A converters minimizes system bill of materials costs by reducing the need for external filtering * High-performance MIPS32 CPU supports advanced application development and future downloadable service models with industry-standard tool chains and operating systems * Support for wire-speed bridging and routing between ADSL and LAN interfaces on a single-chip significantly reduces development time, decreases time-to-market, and increases product flexibility * Two 10/100-Mbps Ethernet MACs with MII and one 10/ 100-Mbps Ethernet PHY interface with auto-MDIX supports true Ethernet-to-Ethernet bridging and routing as well as DMZ interface applications * Dual USB host and device interfaces enable simultaneous Plug and Play connection of PCs and peripheral devices including printers and hard disks * High-speed external bus with industry standard PCI, mini- * Standards compliant for worldwide G.992.1/G.992.2/ G.992.3/G.992.5/T1.413 (Issue II) deployments supporting Annex A, B C, J, I, L, and M * High-performance MIPS32TM CPU with MMU and TLB support * Hardware ATM SAR for enhanced ATM VC management, traffic shaping, and QoS * Two 10/100-Mbps IEEE 802.3u Ethernet MACs and one PHY with auto-MDIX * Configurable USB host and device interface with integrated transceiver * Multi-format peripheral expansion bus with PCI, mini-PCI, CardBus, and PCMCIA support * Serial and parallel FLASH support and high-speed SDRAM interface * Extensive on-board chip power management, EJTAG, GPIO, and UART PCI, CardBus, and PCMCIA support provides glueless interface to Broadcom and 3rd party voice, WiFi(R), security, video encoding and decoding and other peripheral chipsets * 1.2-mm package ball pitch for reduced PCB design complexity * Complete protocol and application software support package * Broadcom-enhanced protocol and applications software provides consistent, proven software architecture across all Broadcom DSL CPE and PON ONT chipsets BCM6348-Based ADSL2+ CPE Modem 802.11b/g RJ11 ADSL Line Driver BCM6348 High-Performance Single-Chip ADSL2+ CPE Modem FLASH SDRAM 10/100 Ethernet USB 1.1 BCM6348 OVERVIEW FLASH IPSEC/AES 802.11 a/b/g Expansion Bus EJTAG V.9x DAA VoIP SLIC/ SLAC TDM Interface I-Cache ADSL2+ AFE BCM6505 VDSL MIPS32 ADSL2+ Xcvr D-Cache System Bu s BCM6301 LD ATM SAR UTOPIA USB MAC Peripheral Bus 10/100 Ethernet MAC UTOPIA 2 x MII USB Host/Dev USB (Host/Dev) USB (Device) IRQs Timers 10/100 Ethernet 10/100 Ethernet PHY 10/100 Ethernet MAC UART GPIO SDRAM Interface SPI BCM6348 SDRAM FLASH The BCM6348 combines a G.992.1/G.992.2/G.992.3/G.992.5/ T1.413 ADSL transceiver and AFE with a high-performance MIPS32 CPU, two 10/100-Mbps Ethernet interfaces, USB (host/device) transceiver, expansion bus interface supporting PCI, mini-PCI, CardBus, and PCMCIA into a single, high-performance chip. A full-featured ATM SAR supports complete traffic shaping, management, and QoS for multiple VCs. The embedded USB (host/ device) transceiver, two 10/100-Mbps Ethernet MACs, and one PHY (with auto-MDIX) provide connectivity to PC hosts as well as optional 10/100/1000-Mbps Ethernet switches. The embedded ADSL transceiver and AFE implement G992.5 (ADSL2+), G.dmt, T1.413, and G.Lite ADSL, along with G.997.1, G.994.1, I.432 TC layer, dual-latency framing, NTR, and embedded operations channels for remote management of the CPE. The expansion bus interface supports seamless connectivity to wired and wireless networking peripheral chips such as Broadcom's 802.11a/b/g or BluetoothTM chipsets via PCI, mini-PCI, CardBus, and PCMCIA, as well as Broadcom's V.92, security processors, and other advanced peripherals. The embedded MIPS32 CPU, with Broadcom-supplied software, controls the ADSL modem, performs high-performance bridging and routing between the ADSL WAN interface and various LAN interfaces, and allows for custom application development with industry-standard EJTAG/Ethernet tool chains and development environments. The BCM6348 enables a complete ADSL CPE router to be assembled with a minimal set of additional components resulting in a most costeffective solution for a variety of ADSL CPE bridging and routing applications. For more information contact your local Broadcom sales representative. Broadcom(R), the pulse logo, and Connecting everything(R) are trademarks of Broadcom Corporation and/ or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the property of their respective owners. (R) BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013 (c) 2004 by BROADCOM CORPORATION. All rights reserved. 6348-PB00-R 06/04/04 Phone: 949-450-8700 Fax: 949-450-8710 E-mail: info@broadcom.com Web: www.broadcom.com