097 RLP 7 Vishay BCcomponents Aluminum Capacitors Radial Low Profile, 7 mm FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue sleeve RoHS COMPLIANT Charge and discharge proof Low profile, 7 mm height Miniaturized, high CV-product per unit volume Compliant to RoHS Directive 2002/95/EC Fig.1 Component outline APPLICATIONS Fig.0 Component outlines. General purpose; industrial, automotive and audio-video Low surface demand on printed-circuit board Coupling, decoupling, smoothing, filtering and timing QUICK REFERENCE DATA DESCRIPTION Portable and mobile equipment (small size, low mass), low profile equipment VALUE Nominal case sizes (O D x L in mm) 4 x 7 to 6.3 x 7 Rated capacitance range, CR 0.1 to 220 F Tolerance on CR MARKING 20 % Rated voltage, UR The capacitors are marked (where possible) with the following information: 6.3 to 63 V Category temperature range - 40 to + 85 C Rated capacitance (in F) Endurance test at 85 C 1000 h Rated voltage (in V) Useful life at 85 C 1500 h Negative terminal identification 40 000 h Code indicating factory of origin Useful life at 40 C , 1.4 x IR applied Shelf life at 0 V, 85 C 500 h Based on sectional specification IEC 60384-4/EN 130300 Climatic category IEC 60068 40/085/56 Name of manufacturer Date code, in accordance with IEC 60062 Series number (097) SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (O D x L in mm) CR (F) UR (V) 6.3 10 16 25 35 50 63 0.10 - - - - - - 4x7 0.22 - - - - - - 4x7 0.47 - - - - - - 4x7 1.0 - - - - - - 4x7 2.2 - - - - - - 4x7 3.3 - - - - - 4x7 5x7 4.7 - - - - 4x7 5x7 6.3 x 7 6.3 x 7 10 - - 4x7 - 5x7 6.3 x 7 22 4x7 - 5x7 - 6.3 x 7 6.3 x 7 - 33 - 5x7 - 6.3 x 7 6.3 x 7 - - 47 5x7 - 6.3 x 7 6.3 x 7 - - - 100 - 6.3 x 7 6.3 x 7 - - - - 220 6.3 x 7 - - - - - - Document Number: 28308 Revision: 08-Mar-11 For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com 85 097 RLP 7 Aluminum Capacitors Radial Low Profile, 7 mm Vishay BCcomponents DIMENSIONS in millimeters, AND AVAILABLE FORMS OD + F 0.5 15 min. 5 min. Od Fig.3 Form TFA: Taped in box (ammopack), formed leads, pitch F = 5 mm Fig.2 Form CA: Long leads Fig.4 Form TNA: Taped in box (ammopack), pitch F = 2.5 mm DIMENSIONS in millimeters AND PACKAGING QUANTITIES NOMINAL CASE SIZE ODxL CASE CODE Od O Dmax. Lmax. F 4x7 71 0.45 4.5 8 5x7 72 0.45 5.5 6.3 x 7 73 0.45 6.8 PACKAGING QUANTITIES FORM CA FORM TFA 1.5 0.5 2000 2000 FORM TNA 2000 8 2.0 0.5 1000 2000 2000 8 2.5 0.5 1000 2000 2000 Note Detailed tape dimensions see section `PACKAGING'. www.vishay.com 86 For technical questions, contact: aluminumcaps1@vishay.com Document Number: 28308 Revision: 08-Mar-11 097 RLP 7 Aluminum Capacitors Radial Low Profile, 7 mm ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Vishay BCcomponents Electrolytic capacitor 097 series DESCRIPTION CR rated capacitance at 120 Hz, tolerance 20 % 100 F/16 V; 20 % IR rated RMS ripple current at 120 Hz, 85 C Nominal case size: O 6.3 mm x 7 mm; Form TFA IL2 max. leakage current after 2 min at UR tan max. dissipation factor at 120 Hz Z max. impedance at 100 kHz Ordering Code: MAL209735101E6 Former 12NC: 2222 097 35101 Note Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 35 50 63 CR 120 Hz (F) 22 47 220 33 100 10 22 47 100 33 47 4.7 10 22 33 3.3 4.7 10 22 0.10 0.22 0.47 1 2.2 3.3 4.7 10 ORDERING CODE MAL2097....... NOMINAL CASE SIZE ODxL (mm) IR 120 Hz 85 C (mA) IL2 2 min (A) tan 120 Hz 4x7 5x7 6.3 x 7 5x7 6.3 x 7 4x7 5x7 6.3 x 7 6.3 x 7 6.3 x 7 6.3 x 7 4x7 5x7 6.3 x 7 6.3 x 7 4x7 5x7 6.3 x 7 6.3 x 7 4x7 4x7 4x7 4x7 4x7 5x7 6.3 x 7 6.3 x 7 31 47 90 43 80 25 39 59 90 53 65 20 30 47 60 18 23 34 53 1.3 2.9 7.9 11 17 21 26 40 3 3 14 4 10 3 4 8 16 9 12 3 4 8 12 3 3 5 11 3 3 3 3 3 3 3 7 0.24 0.24 0.24 0.20 0.20 0.16 0.16 0.16 0.16 0.14 0.14 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 Z 100 kHz () 8.4 4.6 1.8 3.7 2.2 10 5 3.5 2.5 2.6 1.9 10 5.6 3 2.6 14 10 5.5 2.9 170 110 66 36 19 14 10 5.5 BULK LONG LEADS FORM F CA (mm) 53229E6 1.5 53479E6 2.0 53221E6 2.5 54339E6 2.0 54101E6 2.5 55109E6 1.5 55229E6 2.0 55479E6 2.5 55101E6 2.5 56339E6 2.5 56479E6 2.5 50478E6 1.5 50109E6 2.0 50229E6 2.5 50339E6 2.5 51338E6 1.5 51478E6 2.0 51109E6 2.5 51229E6 2.5 58107E6 1.5 58227E6 1.5 58477E6 1.5 58108E6 1.5 58228E6 1.5 58338E6 2.0 58478E6 2.5 58109E6 2.5 TAPED AMMOPACK FORM TFA 33229E6 33479E6 33221E6 34339E6 34101E6 35109E6 35229E6 35479E6 35101E6 36339E6 36479E6 30478E6 30109E6 30229E6 30339E6 31338E6 31478E6 31109E6 31229E6 38107E6 38227E6 38477E6 38108E6 38228E6 38338E6 38478E6 38109E6 F (mm) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 FORM TNA 73229E6 73479E6 73221E6 74339E6 74101E6 75109E6 75229E6 75479E6 75101E6 76339E6 76479E6 70478E6 70109E6 70229E6 70339E6 71338E6 71478E6 71109E6 71229E6 78107E6 78227E6 78477E6 78108E6 78228E6 78338E6 78478E6 78109E6 F (mm) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 ADDITIONAL ELECTRICAL DATA PARAMETER Voltage Surge voltage Reverse voltage Current Leakage current Resistance Equivalent series resistance (ESR) Document Number: 28308 Revision: 08-Mar-11 CONDITIONS VALUE Us 1.15 x UR Urev 1 V After 2 min at UR IL2 0.01 CR x UR or 3 A (whichever is greater) Calculated from tan max. and CR (see Table 2) ESR = tan /2 f CR For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com 87 097 RLP 7 Vishay BCcomponents Aluminum Capacitors Radial Low Profile, 7 mm RIPPLE CURRENT AND USEFUL LIFE CCC205 3.3 IA 3.2 IR 3.1 3.0 2.8 2.6 2.4 lifetime multiplier 2.2 0 1. 5 1. 2.0 0 2. 0 3. 1.8 IA = actual ripple current at 120Hz IR = rated ripple current at 120 Hz, 85 C (1) useful life at 85 C and I applied: 1500 h R 4. 0 1.6 6 .0 15 20 (1) 30 50 70 Fig.5 Multiplier of useful life as a function of ambient temperature and ripple current load 1.2 1.0 0.8 0.5 0.0 10 1.4 40 50 60 70 80 90 100 Tamb (C) Table 1 MULTIPLIER OF RIPPLE CURRENT (IR) (AS A FUNCTION OF FREQUENCY) FREQUENCY (Hz) IR MULTIPLIER 50 0.60 120 1.00 400 1.20 800 1.30 2000 1.40 Table 2 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS Endurance IEC 60384-4/ EN130 300, subclause 4.13 Tamb = 85 C, UR applied; 1000 h C/C: 20 % tan 2 x spec. limit IL2 spec. limit Useful life CECC 30301, subclause 1.8.1 Tamb = 85 C, UR and IR applied; 1500 h C/C: 50 % tan 3 x spec. limit Z 3 x spec. limit IL2 spec. limit no short or open circuit total failure percentage: 3 % Shelf life (storage at high temperature) IEC 60384-4/ EN130300, subclause 4.17 Tamb = 85 C; no voltage applied; 500 h after test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C, tan , Z: for requirements see `Endurance test' above IL2 spec. limit www.vishay.com 88 For technical questions, contact: aluminumcaps1@vishay.com Document Number: 28308 Revision: 08-Mar-11 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000