Schottky Barrier Rectifier MBRF2060CT 2x 10A, 60V, ITO-220AB, Common Cathode MBRF2060CT RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features Pin out Heat sink mmon hode * H igh junction temperature capability Common Cathode * H igh frequency operation * C ommon cathode configuration in electrically isolated ITO220AB package * G uard ring for enhanced ruggedness and long term reliability 3 Anode PAK ode 1 2 3 1 Anode Common Anode Cathode 2 * Low forward voltage drop 3 Anode Common Anode Cathode Pinout 2 TO-220AB Common Cathode Applications * S witching mode power supply Pinout 3 ITO-220AB Common Cathode * DC/DC converters * Polarity protection diodes * F ree-wheeling diodes Maximum Ratings Heat sink Cathode on Cathode 3 de Parameters Symbol Peak Inverse Voltage VRWM 20 (total device) 150 Average Cathode Forward Current Anode 2 Peak1One Cycle Non-Repetitive Surge Current (per leg) Pinout 5 TO-220AC Test Conditions Max Unit - 60 V IF(AV) 50% duty cycle @TC = 105C, rectangular wave form 10 (per leg) IFSM 8.3 ms, half Sine pulse A A Electrical Characteristics Parameters Symbol Test Conditions Max Forward Voltage Drop (per leg) * VF1 @ 10A, Pulse, TJ = 25 C 0.8 V Reverse Current (per leg) * IR1 @VR = rated VR Pulse, TJ = 25 C 1.0 mA Junction Capacitance (per leg) CT @VR = 4V, TC = 25 C, fSIG = 1MHz Voltage Rate of Change dv/dt RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 C) VISO Unit 400 pF 10,000 V/s Clip mounting, the epoxy body away from the heatsink edge by more than 0.110" along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 V * Pulse Width < 300s, Duty Cycle <2% (c)2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF2060CT 2x 10A, 60V, ITO-220AB, Common Cathode Thermal-Mechanical Specifications Parameters Symbol Max Unit Junction Temperature TJ Test Conditions -55 to +150 C -55 to +150 C Storage Temperature Tstg Maximum Thermal Resistance Junction to Case RthJC DC operation 2.3 C/W Typical Thermal Resistance Case to Heat Sink RthCS Mounting surface, smooth and greased (only for ITO-220) 0.5 C/W Approximate Weight wt 2 g Case Style ITO-220AB Figure 1: Typical Forward Characteristics Figure 2: Typical Reverse Characteristics C C C C Figure 3: Typical Junction Capacitance C (c)2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF2060CT 2x 10A, 60V, ITO-220AB, Common Cathode Dimensions- ITO-220AB Symbol Packing Options Millimeters Min Typ Max A 4.30 4.50 4.70 A1 1.10 1.30 1.50 A2 2.80 3.00 3.20 A3 2.50 2.70 2.90 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 b2 1.50 1.60 1.75 b3 1.20 1.30 1.45 b4 1.60 1.70 1.85 c 0.55 0.60 0.75 D 14.80 15.00 15.20 E 9.96 10.16 10.36 e - 2.55 - e1 - 5.10 - H1 6.50 6.70 6.90 L 12.70 13.20 13.70 2.00 L1 1.60 1.80 L2 0.80 1.00 1.20 L3 0.60 0.80 1.00 oP1 oP2 3.30 3.50 3.70 2.99 3.19 3.39 Q 2.50 2.70 2.90 1 2 3 4 5 - 5 - - 4 - - 10 - - 5 - - 5 Part Numbering and Marking System Part Number Marking Packing Mode M.O.Q MBRF2060CT MBRF2060CT 50pcs / Tube 1000 Tube Specification MBRF2060CT 6 7mm LF YYWWL MBR F 20 60 CT LF YY WW L = Device Type = Package type = Forward Current (20A) = Reverse Voltage (60V) = Configuration = Littelfuse = Year = Week = Lot Number 530mm 32mm (c)2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15