Only One Name Means ProTek’Tion™
The P30KP Series, are discrete 30,000 Wa, silicon transient voltage suppressors (TVS) designed for use in applicaons
where large voltage transients can permanently damage voltage sensive components and equipment.
The P30KP series is available in voltages ranging from 30V to 360V with 5 percent and 10 percent tolerances. Both
tolerances are referenced to the power supply output or operang voltage level. This series is compable with IEC
61000-4-5 (Surge) requirements.
• Compable with IEC 61000-4-5 (Surge): 48A, 8/20µs - L3(Line-
Ground), L4(Line-Line) & L1 (Power)
• 30,000 Was Peak Pulse Power per Line (tp = 10/1000µs)
• Unidireconal and Bidireconal Conguraons
• Easy Mounng to Printed Circuit Board
• tClamping (0V to VBR Min.) < 1 x 10-12 seconds theorecal (Unidirec-
onal) and < 5ns (Bidireconal)
• Available in Mulple Voltages Ranging From 30V to 360V
• RoHS Complaint (Exempon #7)
• Molded Case
• Approximate Weight: 5 grams
• Lead-Free Pure-Tin Plang (Annealed)
• Solder Reow Temperature:
Pure-Tin - Sn, 100%: 260-270°C
• Flammability Rang UL 94V-0
• Relay Drives
• Motor (Start/Stop) Back EMF Protecon
• Module Lightning Protecon
• Secondary Lightning Protecon for AC/DC
UNIDIRECTIONAL BIDIRECTIONAL
Only One Name Means ProTek’Tion™
Peak Pulse Power (tp = 10/1000µs) - See Figure 1 PPP 30,000 Was
Forward Surge Rang - 1/120 seconds - See Note 2 IF200 Amps
Steady State Power Dissipaon PP1.0 Was
Storage Temperature TSTG -55 to 150 °C
Operang Temperature TL-55 to 150 °C
P30KP30A 30.0 33.3 50 5000 55.2V @ 543.0A 34
P30KP33A 33.0 36.7 50 5000 58.6V @ 512.0A 39
P30KP36A 36.0 40.0 50 2000 61.8V @ 485.0A 41
P30KP43A 43.0 47.8 50 1000 73.0V @ 410.0A 50
P30KP48A 48.0 53.3 5 250 77.4V @ 388.0A 56
P30KP54A 54.0 60.3 5 20 91.4V @ 331.5A 62
P30KP58A 58.0 64.4 5 20 92.4V @ 325.0A 68
P30KP64A 64.0 71.1 5 10 104.0V @ 294.0A 76
P30KP70A 70.0 77.8 5 10 109.0V @ 274.0A 83
P30KP75A 75.0 83.3 5 10 119.4V @ 251.0A 89
P30KP85A 85.0 94.4 5 10 139.0V @ 216.0A 105
P30KP90A 90.0 100.0 5 10 147.0V @ 206.0A 109
P30KP100 100.0 111.0 5 10 179.0V @ 168.0A 134
P30KP100A 100.0 111.0 5 10 162.0V @ 186.0A 121
P30KP130A 130.0 144.0 5 10 209.0V @ 142.0A 157
P30KP160A 160.0 178.0 5 10 252.6V @ 119.0A 195
P30KP170A 170.0 189.0 5 10 274.0V @ 110.0A 207
P30KP180A 180.0 200.0 5 10 291.0V @ 104.0A 230
P30KP220A 220.0 245.0 5 10 356.0V @ 84.0A 269
P30KP260A 260.0 289.0 5 10 416.0V @ 72.0A 317
P30KP280A 280.0 311.0 5 10 464.0V @ 65.0A 342
P30KP300A 300.0 334.0 5 10 484.0V @ 62.0A 368
P30KP320A 320.0 356.0 5 10 530.0V @ 57.0A 370
P30KP360A 360.0 400.0 5 10 640.0V @ 55.0A 380
1. Part numbers shown are unidireconal devices. Add a “CA” sux to specify bidireconal devices, such as P30KP30. Devices shown are prefered voltages. Contact factory for ad-
dional voltages.
2. VF = 15 Volts @ 200A, 8.3ms(1/2 Sine Wave) - Unidireconal devices only.
Only One Name Means ProTek’Tion™
30kW, 10/1000µs
Waveform
Peak Pulse Power
10/1000µs
tf
Peak Value IPP
TEST
WAVEFORM
PARAMETERS
tf = 10µs
td = 1000µs
td = t/(IPP/2)
e-t
Only One Name Means ProTek’Tion™
P30KPxx -LF n/a n/a n/a n/a
P30KPxxA -LF n/a n/a n/a n/a
P30KPxxCA -LF n/a n/a n/a n/a
1. Marking on Part - logo, part number, date code and posive terminal marked with
band(unidireconal only).
Part #
yyww
P
A 25.4 - 1.00 -
B 9.27 9.77 0.365 0.385
C 25.4 - 1.00 -
D 1.20 DIA. 1.30 DIA. 0.048 DIA. 0.052 DIA.
E 5.96 6.47 0.235 0.255
1. Dimensions are exclusive of mold ash and metal burrs.
E
A
B
C
D
Only One Name Means ProTek’Tion™
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specically for
the protecon of electronic systems from the eects of lightning, Electrostac Discharge (ESD), Nuclear Electromagnec Pulse (NEMP), in-
ducve switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide
applicaon specic protecon soluons for all electronic equipment/systems.
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.
COPYRIGHT © ProTek Devices 2009 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteriscs described herein without noce.
DESIGN CHANGES: ProTek reserves the right to disconnue product lines without noce and that the nal judgement concerning selecon and specicaons is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selecon or specicaons of such products. ProTek makes no warranty, representaon or guarantee regarding the suitability of
its products for any parcular purpose, nor does ProTek assume any liability arising out of the applicaon or use of any product or circuit and specically disclaims any and all liability without limitaon special,
consequenal or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wrien consent from the factory.
2929 South Fair Lane
Tempe, Arizona 85282
USA
General: 602-431-8101
Sales: 602-414-5109
Customer Service: 602-414-5114
General: 602-431-2288
Sales: sales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com
www.protekdevices.com
www.protekanalog.com
