ees AT 22 V1 0B /L Features High Speed Electrically Erasable Programmable Logic Device 7.5 ns Max Propagation Delay 5 V +10% Operation * Low Power ATF22V10BL - 10 mA Standby CMOS and TTL Compatible Inputs and Outputs 150 ,A Leakage Maximum e Reprogrammable - 100% Tested e High Reliability CMOS Technology 2000 V ESD Protection 200 mA Latchup Immunity Full Military, Commercial and Industrial Temperature Ranges Dual-in-Line and Surface Mount Packages in Standard Pinouts Logic Diagram OE PRODUCT TERMS PROGRAMMABLE 12 INTERCONNECT LOGIC to INPUT PINS AND OPTION OUTPUT vO PINS COMBINATORIAL T0144 OPTION, 8 LOGIC ARRAY | 87918 | arog 1 TERMS | FLIP-FLOPS) Description The ATF22V10B and ATF22V10BL are high performance CMOS (Electrically Erasable) Programmable Logic Devices (PLDs) which utilize Atmels proven electrically erasable Flash memory technology. Speeds down to 7.5 ns and power dissipation as low as 10 mA are of- fered. All speed ranges are specified over the full 5 V +10% range for military and industrial temperature ranges, and 5V +5% for commercial ranges. The ATF22V10BL provides the fastest low power CMOS PLD solution, with low DC power .0 mA typical). The ATF22V10BL significantly reduces total system power and enhances system reliability. The ATF22V10B and ATF22V10BL incorporate a variable product term architecture. Each output is allocated from eight to 16 product terms, which allows highly complex logic func- tions to be realized. Two additional product terms are included to provide synchronous preset and asynchronous reset. These terms are common to all 10 registers. All registers are automatically cleared upon power up. Register Preload simplifies testing. A Security Fuse prevents unauthorized copying of pro- grammed fuse patterns. DIP/SOIC LCC/PLCC Pin Configurations NIN[ vO. PinName Function ' vo CLKAN Clock and Logic Input 10 IN Logic Inputs . ar VO Bidirectional Buffers 15 V0 No Internal Connection oe voc +5 V Supply IN GND IN. 1/0 High Performance Flash PLD 2-19- Ld Absolute Maximum Ratings* . *NOTICE: Stresses beyond those listed under "Absolute Maxi- Temperature Under Bias................. -55C to +125C mum Ratings" may cause permanent damage to the device. 0, 0 This is a stress rating only and functional operation of the de- Storage Temperature............00000.. -65C to +150C vice at these or any other conditions beyond those indicated in Voltage on Any Pin with the operational sections of this specification is not implied, . (1) Exposure to absolute maximum rating conditions for extended Respect to Ground... 2.0 Vto +7.0V periods may affect device reliability. Voltage on Input Pins Note: nn Respect to Ground 20V 14.0) 1, Minimum voitage is -0.6 V de which may undershoot to -2.0 UFING Programming. ..........-..0+ 2.0 Vito +14. V for pulses of less than 20 ns. Maximum output pin voltage Programming Voltage with is Vec+0.75 V de which may overshoot to +7.0 V for pulses Respect to Ground... ccc -2.0 V to +14.0 VO) of less than 20 ns. Logic Options To To 5 Output Output From _<ZY+--_ Output Output Options OE D OE From From Logic vo Logic vo Option Option D.C. and A.C. Operating Conditions Commercial industrial Military ATF22V10B/L ATF22V10B/L ATF22V10B/L -7,-10, -15, -25 10, -15, -25 -10, 18, -25 Operating Temperature (Case) 0C - 70C -40C - 85C -55C - 125C Voc Power Supply 5V+5% 5V+10% 5V+10% 2-20 ATF22V10B/L. summaD.C. Characteristics Symbol Parameter Condition Min Typ Max Units Input or 1/0 Low lu Leakage Current 0 < Vin < ViL(MAX) 150 pA Input or I/O High ILo Leakage Current 3.6 <Vin< Voc 10 pA Voc = MAX, ATF22V10B or , 90__120 me lec Power Supply Current Vin = MAX, c, wv 100 130 m Outputs Open ATF22V10BL om. : 5.0 10 mA Ind., Mil. 10 15 mA Clocked Power Supply Vcc = MAX, Outputs Com. 15 mA locez Current Open, f = 1 MHz ATF22V10BL Ind., Mil. 20 mA (t) | Output Short Circuit _ _ los Current VouT = 0.5 V 130 mA VIL Input Low Voltage -0.5 0.8 Vv VIH Input High Voltage 2.0 Vec+0.75 V Vee = Vorv lo = 16mA Com.,Ind. 05 Vv IN = ViH or ViL, VoL Output Low Voltage Voc = MIN lol = 12 mA Mil 05 Vv loL = 24 mA Com. 0.8 Vv : VIN=VIH OF ViL loH = -100 pA Voc-0.3 V Vi Output High Voltage , on eog 9 Voc=MIN lon = -4.0 MA 2.4 Vv Notes; 1. Not more than one output at a time should be shorted. Duration of short circuit test should not exceed 30 sec. 2-21 AIMELAIMEL A.C. Characteristics, Commercial ATF22V10B | ATF22V10B/L| ATF22V10B/L| ATF22V10B/L -7 -10 -15 -25 Symbol | Parameter Min Max Min Max Min Max Min Max | Units tpp Input or I/O to Combinatoriat Output 3 7.5 3 10 3 15 3 25] ns tco Clock to Output Delay 2 5 2 7 2 8 2 15 | ns tcF Clock to Feedback Delay 2.5 2.5 2.5 13 | ns Setup Time, Input or Feedback tsu1 Before Clock 6.5 7 10 15 ns tsu2 |Setup Time, SP Before Clock 10 10 10 15 ns Hoid Time, Input or Feedback After tH Clock 0 0 0 0 ns Maximum Clock Frequency with External Feedback 1/(tsu+tco) 87 m4 55.5 33.3 MHz Maximum Clock Frequency with FMAX Internal Feedback 1/(tsu + tcF) m1 105 80 35.7 MHz Maximum Clock Frequency with No Feedback 111 105 83.3 38.5 MHz twH | Clock Pulse Duration, High 4 4 6 13 ns twe Clock Pulse Duration, Low 4 4 6 13 ns tEA Input or I/O to Output Enable 3 8 3 10 3 15 3 25 | ns tER input or I/O to Output Disable 3 8 3 9 3 15 3 25 | ns Input or I/O to Asynchronous Reset of tap Register 3 13 3 13 3 20 3 25 | ns taw Asynchronous Reset Width 8 8 15 25 ns taR Asynchronous Reset Recovery Time 8 8 10 25 ns tspR Synchronous Preset to Clock 40 40 10 45 ns Recovery Time 2-22 ATF22V10OB/L cumsees AT 22 \ {1B / | A.C. Characteristics, Industrial and Military ATF22V10B | ATF22V10B/L | ATF22V10B/L -10 <15 -25 Symbol | Parameter Min Max Min Max Min Max | Units tpp Input or I/O to Combinatorial Output 3 10 3 15 25 | ns tco Clock to Output Delay 2 7 2 8 15 | ns tor Clock to Feedback Delay 2.5 5 13 | ns tsu1 [Setup Time, Input or Feedback Before Clock 7 10 15 ns tsu2__ [Setup Time, SP Before Clock 10 12 15 ns ty Hold Time, Input or Feedback After Clock 0 0 0 ns va vitee regency with Extemal 74.4 55.5 33.3 MHz FMAX va Tien Maa with Internal 405 66.6 35.7 MHz Maximum Clock Frequency with No Feedback 105 66.6 38.5 MHz twH | Clock Pulse Duration, High 5 6 13 ns twe Clock Pulse Duration, Low 5 6 13 ns tEA Input or 1/O to Output Enable 3 10 3 15 25 | ns ter Input or /O to Output Disable 3 9 3 15 25 | ns tap Input or I/O to Asynchronous Reset of Register 3 13 3 20 25 | ns taw Asynchronous Reset Width 8 15 25 ns taR Asynchronous Reset Recovery Time 8 10 26 ns tspR__| Synchronous Preset to Clock Recovery Time 10 12 15 ns ANMEL 2-23 ayAIMEL a A.C. Waveforms Combinatorial Output INPUTS or VO FEEDBACK VALID INPUT tpo COMBINATORIAL OUTPUT Input or I/O to Output Enable/Disable INPUTS or VO FEEDBACK ten OUTPUT Clock Width twH tw CLK Asynchronous Reset {INPUTS or VO FEEDBACK DRIVING AR REGISTERED OUTPUT CLK Input Test Waveforms and Measurement Levels 3.0V AC AC DRIVING MEASUREMENT LEVELS LEVEL 0.0V IR, F< tns (10% to 90%) 2-24 ATF22V10B/L Registered Output 10 FEEDBACK ty CLK REGISTERED OUTPUT (external fdbk) fax with Feedback CLK Fax (internal fdbky REGISTERED FEEDBACK Synchronous Preset >| e INPUTS or 1/0 FEEDBACK to tsp kg- tco OUTPUT Output Test Loads: Commercial Military 5.0V 5.0V R1=250 2 R1=338 2 OUTPUT OUTPUT PIN PIN R2=167 Q t CL=50pF R2=248 0 t CL=50pFees /\ | 22 \/ 108 /L Functional Logic Diagram ATF22V10B/L INPUT LINES 24 28 RESET (2327) Sir (1.2) (2.3) (3.4) (4.5) 66) (18,21) (6.7) (7.9) (16,19) (8,10) (15,18) (8.14) (14,17) (10,12) SYNCHRONOUS PRESET (11,13) (13,16)Preload of Registered Outputs When testing state machine designs, all possible states and state transitions must be verified in the design, not just those required in the normal machine operations. This is because certain events may occur during system operation that throw the logic into an illegal state (power-up, line voltage glitches, brown-outs, etc.). To test a design for proper treatment of these conditions, a way must be provided to break the feedback paths, and force any desired (i.e., illegal) state into the registers. Then the machine can be sequenced and the outputs tested for correct next state conditions. The ATF22V10B/L device includes circuitry that allows each registered output to be synchronously set either high or low. Thus, any present state condition can be forced for test sequenc- ing. If necessary, approved programmers capable of executing test vectors perform output register preload automatically. Power Up Reset 38V The registers in the ATF22V10B and ATF22V10BL are de- POWER signed to reset during power up. At a point delayed slightly / |q__. pn. )| from Vcc crossing 3.8 V, all registers will be reset to the low state. The output state will depend on the polarity of the output REGISTERED buffer. OUTPUTS 1s This feature is critical for state machine initialization. How- ever, due to the asynchronous nature of reset and the uncertainty tw of how Vcc actually rises in the system, the following condi- CLOCK tions are required: 1) The Vcc rise must be monotonic, Parameter Description Min Typ Max Units 2) After reset occurs, all input and feedback setup times must . P U be met before driving the clock pin high, and tPR Reset Tim 600 1000 ns 3) The clock must remain stable during tpr. Pin Capacitance (f= 1 MHz, T = 25C) Typ Max Units Conditions CIN 5 8 pF VIN=O0V CoutT 6 8 pF VouT=0V Note: 1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested. Device Programming ATF22V10B/L devices are programmed using an Atmel-ap- proved logic programmer, available from a number of manufac- turers. Complete programming of the device takes only a few seconds. Erasing of the device is transparent to the user, and is done automatically as part of the programming cycle. 2-26 ATF22V10B/L ceqmeuneeeen A | 22 \) 1 0B/L Ordering Information tp t t (ns) (ns) (rs) Ordering Code Package Operation Range 75 6.5 5 ATF22V10B-7GC 24D3 Commercial ATF22V10B-7JC 28J (0C to 70C) ATF22V10B-7NC 28L ATF22V10B-7PC 24P3 ATF22V10B-7SC 24S 10 7 7 ATF22V10B-10GC 24D3 Commercial ATF22V10B-10JC 28J (0C to 70C) ATF22V10B-10NC 28L ATF22V10B-10PC 24P3 ATF22V10B-10SC 248 ATF22V10B-10GI 24D3 Industrial ATF22V10B-10JI 28 (-40C to 85C) ATF22V10B-10Ni 28L ATF22V10B-10P! 24P3 ATF22V10B-10S! 24S ATF22V10B-10GM 24D3 Mititary ATF22V10B-10NM 28L (-55C to 125C) ATF22V10B-10GM/883 24D3 Military/883C ATF22V10B-10NM/883 28L (-55C to 125C) Class B, Fully Compliant 15 10 8 ATF22V10B-15GC 24D3 Commercial ATF22V10B-15JC 28J (0C to 70C) ATF22V10B-15NC 28L ATF22V10B-15PC 24P3 ATF22V10B-15SC 24S ATF22V10B-15GI 24D3 Industrial ATF22V10B-15Ji 285 (-40C to 85C) ATF22V10B-15NI 28L ATF22V10B-15P1 24P3 ATF22V10B-15SI 248 ATF22V10B-15GM 24D3 Military ATF22V10B-15NM 28L (-55C to 125C) ATF22V10B-15GM/883 24D3 Military/883C ATF22V10B-15NM/883 28L (-55C to 125C) / Class B, Fully Compliant 25 15 15 ATF22V10B-25GC 24D3 Commercial ATF22V10B-25JC 28J (0C to 70C) ATF22V10B-25NC 28L ATF22V10B-25PC 24P3 ATF22V10B-25SC 24S AIMEL 227Ordering Information tpp ts tco (ns) (ns) (ns) Ordering Code Package Operation Range 25 15 16 ATF22V10B-25GI 24D3 Industrial ATF22V10B-25JI 28J (-40C to 85C) ATF22V10B-25NI 28L ATF22V10B-25PI 24P3 ATF22V10B-25SI 24S ATF22V10B-25GM 24D3 Military ATF22V10B-25NM 28L (-55C to 125C) ATF22V10B-25GM/883 24D3 Military/883C ATF22V10B-25NM/883 28L (-55C to 125C) Class B, Fully Compliant 2-28 ATF22V10B/L. neuees f\ | 22 \ 106 /L Ordering Information tpo ts t (ns) (ns) (ns) Ordering Code Package Operation Range 10 7 7 ATF22V10BL-10GC 24D3 Commercial ATF22V10BL-10JC 285 (0C to 70C) ATF22V10BL-10NC 28L ATF22V10BL-10PC 24P3 ATF22V10BL-10SC 24S 15 10 8 ATF22V10BL-15GC 24D3 Commercial ATF22V10BL-15JNC 28J (0C to 70C) ATF22V10BL-15NC 28L ATF22V10BL-15PC 24P3 ATF22V10BL-15SC 24S ATF22V10BL-15G! 24D3 Industrial ATF22V10BL-15JI 28J (-40C to 85C) ATF22V10BL-15NI 28L ATF22V10BL-15PI 24P3 ATF22V10BL-15SI 24S ATF22V10BL-15GM 24D3 Military ATF22V10BL-15NM 28L (-55C to 125C) ATF22V10BL-15GM/883 24D3 Military/883C ATF22V10BL-15NM/883 28L (-55C to 125C) Class B, Fully Compliant 25 15 15 ATF22V10BL-25GC 24D3 Commercial ATF22V10BL-25JC 28J (0C to 70C) ATF22V10BL-25NC 28L ATF22V10BL-25PC 24P3 ATF22V10BL-25SC 24S ATF22V10BL-25GI 24D3 Industrial ATF22V10BL-25Jl 28J (-40C to 85C) ATF22V10BL-25NI 28L ATF22V10BL-25Pi 24P3 ATF22V10BL-25SI 24S ATF22V10BL-15GM 24D3 Military ATF22V10BL-15NM 28L (-55C to 125C) ATF22V10BL-25GM/883 24D3 Military/883C ATF22V10BL-25NM/883 28L (-55C to 125C) Class B, Fully Compliant Package Type 24D3 24 Lead, 0.300" Wide, Ceramic Dual Inline Package (Cerdip) 28J 28 Lead, Plastic J-Leaded Chip Carrier (PLCC) 28L 28 Pad, Ceramic Leadless Chip Carrier (LCC) 24P3 24 Lead, 0.300 Wide, Plastic Dual inline Package (PDIP) 24S 24 Lead, 0.300" Wide, Plastic Gull Wing Small Outline (SOIC)AIMEL 2-30