2920L110/60MR - LITTELFUSE

POLY-FUSE® Resettable PTCs

Speciﬁcations are subject to change without notice.

Revised: 12/20/19

Surface Mount > 2920L Series

The 2920L Series PTC provides surface mount overcurrent

protection for medium voltage (≤60V) applications where

resettable protection is desired.

Electrical Characteristics

Part Number Marking I hold

(A)

I trip

(A)

V max

(Vdc)

I max

(A)

P d typ.

(W)

Maximum Time

To Tr i p Resistance Agency

Approvals

Current

(A)

Time

(Sec.)

R min

(Ω)

R 1max

(Ω)

2920L030 LF030 0.30 0.60 60 10 1.50 1.50 3.00 1.200 4.800 X X

2920L050 LF050 0.50 1. 0 0 60 10 1.50 2.50 4.00 0.350 1.400 X X

2920L075 LF075 0.75 1.50 30 40 1.50 8.00 0.30 0.350 1.000 X X

2920L075/60 LF075-60 0.75 1.50 60 10 1.50 8.00 0.30 0.300 0.950 X X

2920L100 LF100 1.10 2.20 33 40 1.50 8.00 0.50 0.120 0.410 X X

2920L110/60 LF110 1.10 2.20 60 20 2.00 8.00 0.50 0.120 0.410 X X

2920L125 LF125 1.25 2.50 15 40 1.50 8.00 2.00 0.070 0.250 X X

2920L150 LF150 1.50 3.00 33 40 1.50 8.00 2.00 0.080 0.230 X X

2920L185 LF185 1.85 3.70 33 40 1.50 8.00 2.50 0.050 0.150 X X

2920L200 LF200 2.00 4.00 15 40 1.50 8.00 5.00 0.050 0.125 X X

2920L200/24 LF200-24 2.00 4.00 24 40 1.50 8.00 5.00 0.050 0.125 X X

2920L250 LF250 2.50 5.00 15 40 1.50 8.00 5.00 0.035 0.085 X X

2920L260 LF260 2.60 5.00 6 40 1.50 8.00 10.00 0.025 0.075 X X

2920L260/24 LF260-24 2.60 5.00 24 40 1.50 8.00 5.00 0.025 0.075 X X

2920L300 LF300 3.00 5.00 6 40 1.50 8.00 20.00 0.015 0.048 X X

2920L300/15 LF300-15 3.00 5.00 15 40 1.50 8.00 20.00 0.015 0.048 X X

2920L330/24 LF330 3.3 5.50 24 40 2.0 8.00 5.00 0.015 0.055 X X

2920L400/15 LF400 4.00 8.00 15 40 1.50 20.00 4.00 0.010 0.040 X X

2920L500/16 LF500-16 5.00 10.00 16 40 2.0 20.00 5.00 0.005 0.025 X X

2920L600/12 LF600-12 6.00 12.00 12 50 2.00 30.00 2.00 0.004 0.020 X X

2920L700/12 LF700-12 7. 0 0 14.00 12 50 2.00 35.00 2.00 0.003 0.018 X X

Description

I hold = Hold current: maximum current device will pass without tripping in 20°C still air.

I trip = Trip current: minimum current at which the device will trip in 20°C still air.

V max = Maximum voltage device can withstand without damage at rated current (I max)

I max = Maximum fault current device can withstand without damage at rated voltage (Vmax)

P d = Power dissipated from device when in the tripped state at 20°C still air.

R min = Minimum resistance of device in initial (un-soldered) state.

R typ = Typical resistance of device in initial (un-soldered) state.

R 1max = Maximum resistance of device at 20°C measured one hour after tripping or reﬂow soldering of 260°C for

20 sec.

Caution: Operation beyond the speciﬁed rating may result in damage and possible arcing and ﬂame.

Agency Approvals

Features

Applications

• RoHS compliant, lead-free

and halogen-free

• Fast response to fault

currents

• High voltage

• Low-proﬁle

• IEEE 1394 port protection

• Powered ethernet port

protection (IEEE 802.3 af)

• Automotive electronic

control module protection

• Low voltage telecom

equipment protection

2920L Series RoHS

Agency Agency File Number

E183209

R50119118

Additional Information

Datasheet Samples

Resources Samples

POLY-FUSE® Resettable PTCs

Speciﬁcations are subject to change without notice.

Revised: 12/20/19

Surface Mount > 2920L Series

Ambient Operation Temperature

-40°C -20°C 0°C 20°C 40°C 50°C 60°C 70°C 85°C

Part Number Hold Current (A)

2920L030 0.45 0.40 0.35 0.30 0.25 0.23 0.20 0.17 0.14

2920L050 0.76 0.67 0.59 0.50 0.42 0.38 0.33 0.29 0.23

2920L075 1.13 1.01 0.88 0.75 0.62 0.56 0.50 0.44 0.34

2920L075/60 1.13 1.01 0.88 0.75 0.62 0.56 0.50 0.44 0.34

2920L100 1.66 1.47 1.29 1.10 0.91 0.83 0.73 0.64 0.50

2920L110/60 1.66 1.47 1.29 1.10 0.91 0.83 0.73 0.64 0.50

2920L125 1.89 1.68 1.46 1.25 1.04 0.94 0.83 0.73 0.56

2920L150 2.27 2.01 1.76 1.50 1.25 1. 13 1. 0 0 0.87 0.74

2920L185 2.80 2.47 2.17 1.85 1.54 1.39 1.22 1.07 0.85

2920L200 3.02 2.68 2.34 2.00 1.66 1.50 1.32 1. 16 0.90

2920L200/24 3.14 2.77 2.42 2.00 1.73 1.56 1.38 1.20 0.98

2920L250 3.78 3.35 2.93 2.50 2.08 1.88 1.65 1.45 1. 13

2920L260 3.64 3.25 2.91 2.60 2.26 2.08 1.95 1.74 1.48

2920L260/24 3.64 3.25 2.91 2.60 2.26 2.08 1.95 1. 74 1.48

2920L300 4.53 4.02 3.51 3.00 2.52 2.26 1.99 1.75 1.34

2920L300/15 4.20 3.85 3.44 3.00 2.69 2.50 2.31 2.12 1.83

2920L330/24 4.60 4.20 3.75 3.30 2.95 2.75 2.50 2.25 1.70

2920L400/15 5.50 5.00 4.50 4.00 3.40 3.10 2.80 2.50 2.10

2920L500/16 7.55 6.70 5.85 5.00 4.15 3.75 3.30 2.90 2.25

2920L600/12 8.58 7.83 7.05 6.00 5.27 4.87 4.48 4.05 3.38

2920L700/12 9.48 8.73 7.92 7. 0 0 6.36 5.88 5.41 4.83 3.94

Temperature Rerating

Temperature Rerating Curve

-40 -30 -20 -10010 20 30 40 50 60 70 80 85

10%

30%

50%

70%

90%

110%

130%

150%

170%

Temperature (°C)

Percentage of Rated Current

Average Time Current Curves

The average time current curves and Temperature Rerating curve performance is affected by a number

or variables, and these curves provided as guidance only. Customer must verify the performance in their

application.

Note: Typical Temperature rerating curve, refer to table for rerating data

Notes: The temperature rerating data is only for reference, please contact Littelfuse technical support for detail temperature rerating information.

0.01

0.1

100

0.1 110100

Current in Amperes

Time in Seconds

0.30A

0.50A

0.75A & 0.75A/60

1. 00A

1. 10A/60

1.25A

1.50A

1.85A

2.00A/24V

2.50A

3.30A/24V

2.60A & 2.60A/24

3.00A/15V

4.00A/15V

5.00A/16V

6.00A/12

7. 00A/12

POLY-FUSE® Resettable PTCs

Speciﬁcations are subject to change without notice.

Revised: 12/20/19

Surface Mount > 2920L Series

Environmental Speciﬁcations

Soldering Parameters

Operating/Storage Temperature -40°C to +85°C

Maximum Device Surface

Temperature in Tripped State 125°C

Passive Aging +85°C, 1000 hours

-/+5% typical resistance change

Humidity Aging +85°C, 85%,R.H.,1000 hours

-/+5% typical resistance change

Thermal Shock

MIL-STD-20 2, Method 107

+85°C/-40°C 20 times

-30% typical resistance change

Solvent Resistance MIL–STD–202, Method 215

Vibration MIL–STD–883, Method 2007, Condition A

Moisture Sensitivity Level Level 2a, J–STD–020

Physical Speciﬁcations

Terminal Material Solder-Plated Copper (Solder Material: Matte Tin(Sn))

Lead Solderability Meets EIA Speciﬁcation RS186-9E, ANSI/

J-STD-002 Category 3.

Time

Temperature

TS(max)

TS(min)

time to peak temperature

PreheatPrehea

Ramp-up

amp-up

Ramp-downRamp-d

Critical Zone

tL to tP

Proﬁle Feature Pb-Free Assembly

Average Ramp-Up Rate (TS(max) to TP)3°C/second max

Pre Heat:

Temperature Min (Ts(min))150°C

Temperature Max (Ts(max))200°C

Time (Min to Max) (ts)60 – 180 secs

Time Maintained

Above:

Temperature (TL)217°C

Temperature (tL)60 – 150 seconds

Peak / Classiﬁcation Temperature (TP)260+0/-5 °C

Time within 5°C of actual peak Temperature (tp)20 – 40 seconds

Ramp-down Rate 6°C/second max

Time 25°C to peak Temperature (TP)8 minutes Max.

-- All temperature refer to topside of the package, measured on the package body surface

-- If reﬂow temperature exceeds the recommended proﬁle, devices may not meet the performance

requirements

-- Recommended reﬂow methods: IR, vapor phase oven, hot air oven, N2 environment for lead

-- Recommended maximum paste thickness is 0.25mm (0.010 inch)

-- Devices can be cleaned using standard industry methods and solvents

-- Devices can be reworked using the standard industry practices

POLY-FUSE® Resettable PTCs

Speciﬁcations are subject to change without notice.

Revised: 12/20/19

Surface Mount > 2920L Series

Part Number

AB C D E

Inches mm Inches mm Inches mm Inches mm Inches mm

Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max

2920L030 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L050 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L075 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L075/60 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.05 0.06 1.20 1.80 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L100 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.02 0.04 0.55 1. 0 0 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L110/60 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.06 0.079 1. 2 2.0 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L125 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.02 0.04 0.55 1. 0 0 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L150 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L185 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L200 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L200/24 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L250 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L260 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.02 0.04 0.55 1. 0 0 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L260/24 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L300 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L300/15 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.05 0.75 1.25 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L330/24 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.06 0.079 1. 2 2 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L400/15 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.03 0.06 0.8 1.6 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L500/16 0.26 0.31 6.73 7.98 0.19 0.21 4.80 5.44 0.03 0.06 0.8 1.6 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L600/12 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.031 0.063 0.8 1.6 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

2920L700/12 0.26 0.31 6.73 7.98 0.19 0.21 4.8 5.44 0.031 0.063 0.8 1.6 0.01 0.1 0.3 2.5 0.01 0.08 0.25 2.0

Dimensions (mm)

Top

View

Pad

Layout

Side

View

Bottom

View

5.30 mm

(.209”)

4.60 mm

(.181”)

2.0mm

(.079”)

MARKING CODE VARIES

WITH AMPERAGE AND VOLTAGE RATING

(SEE ELECTRICAL CHARACTERISTIC TABLE)

SHOWN ARE:

- 1.5A/33V RATING (LEFT)

- 2.0A/24V RATING (RIGHT)

150

200

-24

POLY-FUSE® Resettable PTCs

Speciﬁcations are subject to change without notice.

Revised: 12/20/19

Surface Mount > 2920L Series

Part Ordering Number System

Packaging Style

Size

L: Littelfuse Surface Mount PPTC

HOLD

Hold Current code

(Refer to Electrical Characteristics Table)

/XX: Special Voltage Rating

(Not applicable to all parts. Refer

to Electrical Characteristics Table)

Quantity Code: K=10,000 Y=4,000 W=3,000 P=2,000

R: Tape & Reel

SERIES

2920 L 380 /12 TH Y R

Thin Proﬁle

(Not applicable to all parts)

-A: Automotive grade

Blank: Standard version

- A

Packaging

Part Number Ordering Number Halogen

Free

I hold

(A) I hold Code Voltage

Option

Packaging

Option Quantity

Quantity &

Packaging

Codes

2920L030 2920L030DR Yes 0.30 030 - Tape and Reel 1500 DR

2920L050 2920L050DR Yes 0.50 050 - Tape and Reel 1500 DR

2920L075 2920L075DR Yes 0.75 075 - Tape and Reel 1500 DR

2920L075/60 2920L075/60MR Yes 0.75 075 /60 Tape and Reel 1000 MR

2920L100 2920L100PR Yes 1. 10 100 - Tape and Reel 2000 PR

2920L110/60 2920L110/60MR Yes 1.1 110 /60 Tape and Reel 1,000 MR

2920L125 2920L125PR Yes 1.25 125 - Tape and Reel 2000 PR

2920L150 2920L150DR Ye s 1.50 150 - Tape and Reel 1500 DR

2920L185 2920L185DR Yes 1.85 185 - Tape and Reel 1500 DR

2920L200 2920L200DR Yes 2.00 200 - Tape and Reel 1500 DR

2920L200/24 2920L200/24DR Yes 2.00 200 /24 Tape and Reel 1500 DR

2920L250 2920L250DR Ye s 2.50 250 - Tape and Reel 1500 DR

2920L260/24 2920L260/24DR Yes 2.60 260 /24 Tape and Reel 1500 DR

2920L260 2920L260PR Yes 2.60 260 - Tape and Reel 2000 PR

2920L300 2920L300DR Yes 3.00 300 - Tape and Reel 1500 DR

2920L300/15 2920L300/15DR Ye s 3.00 300 /15 Tape and Reel 1500 DR

2920L330/24 2920L330/24MR Yes 3.3 330 /24 Tape and Reel 1,000 MR

2920L400/15 2920L400/15MR Ye s 4 400 /15 Tape and Reel 1,000 MR

2920L500/16 2920L500/16MR Ye s 5.00 500 - Tape and Reel 1,000 MR

2920L600/12 2920L600/12MR Ye s 6.0 600 /12 Tape and Reel 1,000 MR

2920L700/12 2920L700/12MR Ye s 7. 0 700 /12 Tape and Reel 1,000 MR

POLY-FUSE® Resettable PTCs

Speciﬁcations are subject to change without notice.

Revised: 12/20/19

Surface Mount > 2920L Series

TAPE SPECIFICATIONS: EIA-481-1 (mm)

REEL DIMENSIONS:

EIA-481-1 (mm)

2920L030, 2920L050

2920L075, 2920L150

2920L185, 2920L200

2920L200/24

2920L250, 2920L300

2920L300/15

2920L100,

2920L125,

2920L260

2920L075/60

2920L110/60

2920L500/16

2920L330/24

2920L400/15

2920L600/12

2920L700/12

W16.0+/- 0.30 16.0+/- 0.30 16.0+/- 0.30 CØ180.0+/- 3.0

F7.50+/- 0.10 7.50+/-0.10 7.50+/- 0.10 DØ60+/−0.5

E11.75+/- 0.10 1.75+/- 0.10 1.75+/- 0.10 H19.5+/- 1.0

D01.55+/- 0.05 1.55+/- 0.05 1.50+/- 0.05 W17+/- 0.2

D11.50+/- 0.10 1.50+/- 0.10 1.50 (min)

P04.00+/- 0.10 4.00+/- 0.10 4.00+/- 0.10

P18.00+/- 0.10 8.00+/- 0.10 8.00+/- 0.10

P22.00+/-0.10 2.00+/-0.10 2.00+/-0.10

A05.74+/- 0.10 5.74+/- 0.10 5.45+/- 0.10

B08.02+/- 0.10 8.02+/- 0.10 7.90+/-0.10

T0.30+/- 0.10 0.30+/- 0.10 0.30+/-0.05

KO1.30+/- 0.10 0.91+/- 0.10 2.00+/- 0.10

Leader min. 390 390 390

Trailer min. 160 160 160

Tape and Reel Speciﬁcations

Tape and Reel Diagram

Warning:

• Users shall independently assess the suitability of these devices for each of their applications

• Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or ﬁre

• These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such

• conditions are expected to be repetitive or prolonged in duration

• Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices

• These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses

• Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device.

Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are

not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.

P1P0

D0P2