Europe: +49 / 7731 8399 0 | Email: info@meder.com Item No.: USA: +1 / 508 295 0771 | Email: salesusa@meder.com Asia: +852 / 2955 1682 | Email: salesasia@meder.com 3215172112 Item: DIP15-1A72-12D Preliminary Datasheet Conditions Coil Data at 20 C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacity Special Product Data Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Dielectric Strength Coil/Shield Capacity Coil/Contact Housing material Connection pins Reach / RoHS conformity Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 66/3 Min ! "# $%! %#! #& ' not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ( ) * +% Start Value , - #. * %. RH <45 %, 100 V test voltage according to EN 60255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch / ) ) 0 Conditions Min Typ Max according to EN 60255-5 RH <45%, 200 VDC measuring voltage according to EN 60255-5 @ 10 kHz Unit 1 / 0 epoxy resin CuFe2P, tin plated yes Modifications in the sense of technical progress are reserved Designed at: 28.04.04 Designed by: SCHELLHORN Approval at: Last Change at: 22.12.11 Last Change by: THAUKE Approval at: 26.08.09 Approval by: Approval by: KOLBRICH Version: 4 Europe: +49 / 7731 8399 0 | Email: info@meder.com Item No.: USA: +1 / 508 295 0771 | Email: salesusa@meder.com Asia: +852 / 2955 1682 | Email: salesasia@meder.com 3215172112 Item: DIP15-1A72-12D Preliminary Datasheet Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min Max 4 4 wave soldering max. 5 sec. 5 Unit 2 2 3 3 3 fully sealed Conditions General data Typ 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz Min Total weigth Packaging Typ Max 25 pieces per Tube Unit 2 Modifications in the sense of technical progress are reserved Designed at: 28.04.04 Designed by: SCHELLHORN Approval at: Last Change at: 22.12.11 Last Change by: THAUKE Approval at: 26.08.09 Approval by: Approval by: KOLBRICH Version: 4