54ACTQ273
Quiet Series Octal D Flip-Flop
General Description
TheACTQ273 has eight edge-triggered D-type flip-flops with
individual D inputs and Q outputs. The common buffered
Clock (CP) and Master Reset (MR) input load and reset
(clear) all flip-flops simultaneously.
The register is fully edge-triggered. The state of each D in-
put, one setup time before the LOW-to-HIGH clock transi-
tion, is transferred to the corresponding flip-flop’s Q output.
All outputs will be forced LOW independently of Clock or
Data inputs by a LOW voltage level on the MR input. The de-
vice is useful for applications where the true output only is re-
quired and the Clock and Master Reset are common to all
storage elements.
The ACTQ utilizes NSC Quiet Series technology to guaran-
tee quiet output switching and improved dynamic threshold
performance. FACT Quiet Series™features GTO™output
control and undershoot corrector in addition to a split ground
bus for superior performance.
Features
nI
CC
reduced by 50%
nGuaranteed simultaneous switching noise level and
dynamic threshold performance
nImproved latch-up immunity
nBuffered common clock and asynchronous master reset
nOutputs source/sink 24 mA
nFaster prop delays than the standard ’AC/’ACT273
n4 kV minimum ESD immunity
nStandard Microcircuit Drawing (SMD)
5962-89735
Logic Symbols
Pin Names Description
D
0
–D
7
Data Inputs
MR Master Reset
CP Clock Pulse Input
Q
0
–Q
7
Data Outputs
GTO™is a trademark of National Semiconductor Corporation.
FACT®is a registered trademark of Fairchild Semiconductor Corporation.
FACT Quiet Series™is a trademark of Fairchild Semiconductor Corporation.
DS100240-1
IEEE/IEC
DS100240-2
August 1998
54ACTQ273 Quiet Series Octal D Flip-Flop
© 1998 National Semiconductor Corporation DS100240 www.national.com