DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D239 KTY81-1 series Silicon temperature sensors Product specification Supersedes data of 1998 Mar 26 2000 Aug 25 Philips Semiconductors Product specification Silicon temperature sensors KTY81-1 series DESCRIPTION PINNING The temperature sensors in the KTY81-1 series have a positive temperature coefficient of resistance and are suitable for use in measurement and control systems. The sensors are encapsulated in the SOD70 leaded plastic package. PIN DESCRIPTION 1 electrical contact 2 electrical contact 3 not to be connected to a potential Tolerances of 0.5% or other special selections are available on request. MARKING TYPE NUMBER CODE KTY81-110 110 KTY81-120 120 KTY81-121 121 KTY81-122 122 KTY81-150 150 KTY81-151 151 KTY81-152 152 1 handbook, halfpage 3 2 MBH739 Fig.1 Simplified outline (SOD70). QUICK REFERENCE DATA SYMBOL R25 Tamb 2000 Aug 25 PARAMETER sensor resistance CONDITIONS MIN. MAX. UNIT Tamb = 25 C; Icont = 1 mA KTY81-110 990 1010 KTY81-120 980 1020 KTY81-121 980 1000 KTY81-122 1000 1020 KTY81-150 950 1050 KTY81-151 950 1000 KTY81-152 1000 1050 -55 +150 C ambient operating temperature 2 Philips Semiconductors Product specification Silicon temperature sensors KTY81-1 series LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL Icont Tamb PARAMETER continuous sensor current CONDITIONS MIN. MAX. UNIT in free air; Tamb = 25 C - 10 mA in free air; Tamb = 150 C - 2 mA -55 +150 C ambient operating temperature CHARACTERISTICS Tamb = 25 C, in liquid, unless otherwise specified. SYMBOL R25 PARAMETER sensor resistance CONDITIONS MIN. TYP. MAX. UNIT Icont = 1 mA KTY81-110 990 - 1010 KTY81-120 980 - 1020 KTY81-121 980 - 1000 KTY81-122 1000 - 1020 KTY81-150 950 - 1050 KTY81-151 950 - 1000 KTY81-152 1000 - 1050 - 0.79 - %/K TC temperature coefficient R100/R25 resistance ratio Tamb = 100 C and 25 C 1.676 1.696 1.716 R-55/R25 resistance ratio Tamb = -55 C and 25 C 0.480 0.490 0.500 thermal time constant; note 1 in still air - 30 - s in still liquid; note 2 - 5 - s in flowing liquid; note 2 - 3 - s -55 - +150 C rated temperature range Notes 1. The thermal time constant is the time taken for the sensor to reach 63.2% of the total temperature difference. For example, if a sensor with a temperature of 25 C is moved to an environment with an ambient temperature of 100 C, the time for the sensor to reach a temperature of 47.4 C is the thermal time constant. 2. Inert liquid, e.g. FC43 manufactured by the 3M company. 2000 Aug 25 3 Philips Semiconductors Product specification Silicon temperature sensors KTY81-1 series Table 1 Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81-110 and KTY81-120 Icont = 1 mA. AMBIENT TEMPERATURE (C) (F) TEMP. COEFF. KTY81-110 RESISTANCE () KTY81-120 MIN. TYP. MAX. TEMP. ERROR (K) (%/K) RESISTANCE () MIN. TYP. MAX. TEMP. ERROR (K) -55 -67 0.99 475 490 505 3.02 470 490 510 4.02 -50 -58 0.98 500 515 530 2.92 495 515 535 3.94 -40 -40 0.96 552 567 582 2.74 547 567 588 3.78 -30 -22 0.93 609 624 638 2.55 603 624 645 3.62 -20 -4 0.91 669 684 698 2.35 662 684 705 3.45 -10 14 0.88 733 747 761 2.14 726 747 769 3.27 0 32 0.85 802 815 828 1.91 793 815 836 3.08 10 50 0.83 874 886 898 1.67 865 886 907 2.88 20 68 0.80 950 961 972 1.41 941 961 982 2.66 25 77 0.79 990 1000 1010 1.27 980 1000 1020 2.54 30 86 0.78 1029 1040 1051 1.39 1018 1040 1061 2.68 40 104 0.75 1108 1122 1136 1.64 1097 1122 1147 2.97 50 122 0.73 1192 1209 1225 1.91 1180 1209 1237 3.28 60 140 0.71 1278 1299 1319 2.19 1265 1299 1332 3.61 70 158 0.69 1369 1392 1416 2.49 1355 1392 1430 3.94 80 176 0.67 1462 1490 1518 2.8 1447 1490 1532 4.3 90 194 0.65 1559 1591 1623 3.12 1543 1591 1639 4.66 100 212 0.63 1659 1696 1733 3.46 1642 1696 1750 5.05 110 230 0.61 1762 1805 1847 3.83 1744 1805 1865 5.48 120 248 0.58 1867 1915 1963 4.33 1848 1915 1982 6.07 125 257 0.55 1919 1970 2020 4.66 1899 1970 2040 6.47 130 266 0.52 1970 2023 2077 5.07 1950 2023 2097 6.98 140 284 0.45 2065 2124 2184 6.28 2043 2124 2205 8.51 150 302 0.35 2145 2211 2277 8.55 2123 2211 2299 11.43 2000 Aug 25 4 Philips Semiconductors Product specification Silicon temperature sensors KTY81-1 series Table 2 Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81-121 and KTY81-122 Icont = 1 mA. AMBIENT TEMPERATURE (C) (F) TEMP. COEFF. KTY81-121 RESISTANCE () KTY81-122 MIN. TYP. MAX. TEMP. ERROR (K) (%/K) RESISTANCE () MIN. TYP. MAX. TEMP. ERROR (K) -55 -67 0.99 471 485 500 3.02 480 495 510 3.02 -50 -58 0.98 495 510 524 2.92 505 520 535 2.92 -40 -40 0.96 547 562 576 2.74 558 573 588 2.74 -30 -22 0.93 603 617 632 2.55 615 630 645 2.55 -20 -4 0.91 662 677 691 2.35 676 690 705 2.35 -10 14 0.88 726 740 754 2.14 741 755 769 2.14 0 32 0.85 794 807 820 1.91 810 823 836 1.91 10 50 0.83 865 877 889 1.67 883 895 907 1.67 20 68 0.80 941 951 962 1.41 960 971 982 1.41 25 77 0.79 980 990 1000 1.27 1000 1010 1020 1.27 30 86 0.78 1018 1029 1041 1.39 1039 1050 1062 1.39 40 104 0.75 1097 1111 1125 1.64 1120 1134 1148 1.64 50 122 0.73 1180 1196 1213 1.91 1204 1221 1238 1.91 60 140 0.71 1266 1286 1305 2.19 1291 1312 1332 2.19 70 158 0.69 1355 1378 1402 2.49 1382 1406 1430 2.49 80 176 0.67 1447 1475 1502 2.8 1477 1505 1533 2.8 90 194 0.65 1543 1575 1607 3.12 1574 1607 1639 3.12 100 212 0.63 1642 1679 1716 3.46 1676 1713 1750 3.46 110 230 0.61 1745 1786 1828 3.83 1780 1823 1865 3.83 120 248 0.58 1849 1896 1943 4.33 1886 1934 1982 4.33 125 257 0.55 1900 1950 2000 4.66 1938 1989 2041 4.66 130 266 0.52 1950 2003 2056 5.07 1989 2044 2098 5.07 140 284 0.45 2044 2103 2162 6.28 2 085 2146 2206 6.28 150 302 0.35 2124 2189 2254 8.55 2167 2233 2299 8.55 2000 Aug 25 5 Philips Semiconductors Product specification Silicon temperature sensors KTY81-1 series Table 3 Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81-150 and KTY81-151 Icont = 1 mA. AMBIENT TEMPERATURE (C) (F) TEMP. COEFF. KTY81-150 RESISTANCE () KTY81-151 MIN. TYP. MAX. TEMP. ERROR (K) (%/K) RESISTANCE () MIN. TYP. MAX. TEMP. ERROR (K) -55 -67 0.99 456 490 524 7.04 456 478 499 4.52 -50 -58 0.98 479 515 550 6.99 480 502 524 4.45 -40 -40 0.96 530 567 605 6.91 530 553 576 4.3 -30 -22 0.93 584 624 663 6.84 584 608 632 4.16 -20 -4 0.91 642 684 725 6.77 642 667 691 4.01 -10 14 0.88 703 747 791 6.69 704 729 753 3.84 0 32 0.85 769 815 861 6.61 770 794 819 3.67 10 50 0.83 838 886 934 6.51 839 864 889 3.48 20 68 0.80 912 961 1010 6.41 912 937 962 3.28 25 77 0.79 950 1000 1050 6.35 950 975 1000 3.18 30 86 0.78 987 1040 1093 6.55 988 1014 1040 3.33 40 104 0.75 1064 1122 1181 6.97 1064 1094 1124 3.64 50 122 0.73 1143 1209 1274 7.4 1144 1178 1212 3.97 60 140 0.71 1226 1299 1371 7.85 1227 1266 1305 4.31 70 158 0.69 1313 1392 1472 8.31 1314 1357 1401 4.67 80 176 0.67 1402 1490 1577 8.79 1404 1453 1501 5.05 90 194 0.65 1495 1591 1687 9.29 1497 1551 1606 5.43 100 212 0.63 1591 1696 1801 9.81 1593 1654 1 714 5.84 110 230 0.61 1690 1805 1919 10.4 1692 1759 1827 6.3 120 248 0.58 1791 1915 2039 11.28 1792 1867 1942 6.94 125 257 0.55 1840 1970 2099 11.91 1842 1920 1999 7.38 130 266 0.52 1889 2023 2158 12.72 1891 1973 2055 7.94 140 284 0.45 1980 2124 2269 15.21 1982 2071 2161 9.63 150 302 0.35 2057 2211 2365 20.09 2059 2156 2252 12.88 2000 Aug 25 6 Philips Semiconductors Product specification Silicon temperature sensors KTY81-1 series Table 4 Ambient temperature, corresponding resistance, temperature coefficient and maximum expected temperature error for KTY81-152 Icont = 1 mA. AMBIENT TEMPERATURE (C) (F) KTY81-152 RESISTANCE () MIN. TYP. MAX. TEMP. ERROR (K) (%/K) -55 -67 0.99 480 502 525 4.52 -50 -58 0.98 505 528 551 4.45 -40 -40 0.96 558 582 606 4.3 -30 -22 0.93 614 639 664 4.16 -20 -4 0.91 675 701 726 4.01 -10 14 0.88 740 766 792 3.84 0 32 0.85 809 835 861 3.67 10 50 0.83 882 908 934 3.48 20 68 0.80 959 985 1011 3.28 25 77 0.79 1000 1025 1050 3.18 30 86 0.78 1038 1066 1093 3.33 40 104 0.75 1119 1150 1182 3.64 50 122 0.73 1203 1239 1275 3.97 60 140 0.71 1290 1331 1372 4.31 70 158 0.69 1381 1427 1473 4.67 80 176 0.67 1476 1527 1578 5.05 90 194 0.65 1573 1631 1688 5.43 100 212 0.63 1674 1738 1802 5.84 110 230 0.61 1779 1850 1921 6.3 120 248 0.58 1884 1963 2041 6.94 125 257 0.55 1937 2 019 2101 7.38 130 266 0.52 1988 2074 2160 7.94 140 284 0.45 2084 2178 2271 9.63 150 302 0.35 2165 2266 2367 12.88 2000 Aug 25 7 Philips Semiconductors Product specification Silicon temperature sensors KTY81-1 series MGG696 15 T (K) MSA923 2.4 handbook, halfpage handbook, halfpage KTY81-151 -152 R (k) 10 KTY81-120 1.6 5 KTY81-110 -121 -122 0 -5 0.8 -10 -15 -50 0 50 0 -100 100 150 Tamb (C) -50 0 50 100 150 200 Tamb (C) Icont = 1 mA. Fig.3 Sensor resistance as a function of ambient temperature; average values. Fig.2 Maximum expected temperature error (T). MGG699 3 MGG705 12 handbook, halfpage handbook, halfpage R (k) Icont (mA) 150 C 125 C 2 8 100 C 75 C 50 C 25 C 0 C -25 C 1 4 -50 C 0 10-1 1 Icont (mA) 0 -50 10 0 50 100 150 Tamb (C) To keep the temperature error low, an operating current of Icont = 1 mA is recommended for temperatures above 100 C. Fig.4 Sensor resistance as a function of operating current. 2000 Aug 25 Fig.5 8 Maximum operating current for safe operation. Philips Semiconductors Product specification Silicon temperature sensors KTY81-1 series MGG704 20 handbook, halfpage R () 10 0 -10 0 1 Icont (mA) 2 Tamb = 25 C. Fig.6 Deviation of sensor resistance as a function of operating current in still liquid. APPLICATION INFORMATION SYMBOL R25 2000 Aug 25 PARAMETER drift of sensor resistance at 25 C CONDITIONS 10000 hours continuous operation; Tamb = 150 C 9 TYP. 1.6 UNIT Philips Semiconductors Product specification Silicon temperature sensors KTY81-1 series PACKAGING Sensors in SOD70 encapsulation are delivered in bulk packaging and also in reel packaging for automatic placement on hybrid circuits and printed-circuit boards (see Figs 7 and 8). Note: Types in bulk packaging have a lead-to-lead distance of 2.54 millimetres. The lead-to-lead distance of types packaged on reel is 5.08 millimetres for spread lead types and 2.54 millimetres for straight lead types. P handbook, full pagewidth T A1 h (p) h A H2 W2 H1 H0 W0 L W1 W F1 MBH795 F2 D0 F t P2 P0 Fig.7 Configuration of bandolier: spread leads. 2000 Aug 25 t1 10 Philips Semiconductors Product specification Silicon temperature sensors KTY81-1 series P handbook, full pagewidth T A1 h (p) h A H2 W2 H1 H0 W0 L W1 W F1 MBL214 F2 D0 F t P2 P0 Fig.8 Configuration of bandolier: straight leads. 2000 Aug 25 t1 11 Philips Semiconductors Product specification Silicon temperature sensors Table 5 KTY81-1 series Tape specification SPECIFICATIONS SYMBOL DIMENSION REMARKS MIN. NOM. MAX. TOL. UNIT A1 body width 4.4 - 4.8 - mm A body height 5 - 5.2 - mm T body thickness 3.6 - 4.2 - mm P pitch of component - 12.7 - 1 mm P0 feed hole pitch - 12.7 - 0.3 mm cumulative pitch error - - - 0.1 6.35 - 0.4 mm P2 feed hole centre to component - centre F lead-to-lead distance note 1 spread leads - 5.08 - +0.6/-0.2 mm straight leads - 2.54 - +0.6/-0.2 mm h component alignment - 0 1 - mm W tape width - 18 - 0.5 mm W0 hold-down tape width - 6 - 0.2 mm W1 hole position - 9 - +0.7/-0.5 mm W2 hold-down tape position - 0.5 - 0.2 mm H0 lead wire clinch height - 16.5 - 0.5 mm H1 component height - - 23.25 - mm L length of snipped leads - - 11 - mm D0 feed hole diameter - 4 - 0.2 mm t total tape thickness - - 1.2 - mm F1, F2 lead to snipped lead distance spread leads - 2.54 - +0.4/-0.2 mm straight leads - 1.27 - +0.4/-0.2 mm H2 clinch height - 2.5 - +0.5/0 mm (p) pull-out force 6 - - - N Note 1. Measured over 20 devices. 2000 Aug 25 12 to be measured at bottom of clinch at top of body t1 = 0.3 to 0.6 Philips Semiconductors Product specification Silicon temperature sensors KTY81-1 series PACKAGE OUTLINE Plastic near cylindrical single-ended package; 2 in-line leads SOD70 c E d A L b 1 e D 2 b1 L2 L1 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) (1) UNIT A b b1 c D d E e L L1 max. L2 mm 5.2 5.0 0.48 0.40 0.66 0.56 0.45 0.40 4.8 4.4 1.7 1.4 4.2 3.6 2.54 14.5 12.7 2.5 0.7 0.5 Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION REFERENCES IEC JEDEC EIAJ ISSUE DATE 98-05-25 SOD70 2000 Aug 25 EUROPEAN PROJECTION 13 Philips Semiconductors Product specification Silicon temperature sensors KTY81-1 series DATA SHEET STATUS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS (1) Objective specification Development This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. Preliminary specification Qualification This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Note 1. Please consult the most recently issued data sheet before initiating or completing a design. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2000 Aug 25 14 Philips Semiconductors Product specification Silicon temperature sensors KTY81-1 series NOTES 2000 Aug 25 15 Philips Semiconductors - a worldwide company Argentina: see South America Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140, Tel. +61 2 9704 8141, Fax. +61 2 9704 8139 Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210 Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6, 220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773 Belgium: see The Netherlands Brazil: see South America Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor, 51 James Bourchier Blvd., 1407 SOFIA, Tel. +359 2 68 9211, Fax. +359 2 68 9102 Canada: PHILIPS SEMICONDUCTORS/COMPONENTS, Tel. +1 800 234 7381, Fax. +1 800 943 0087 China/Hong Kong: 501 Hong Kong Industrial Technology Centre, 72 Tat Chee Avenue, Kowloon Tong, HONG KONG, Tel. +852 2319 7888, Fax. +852 2319 7700 Colombia: see South America Czech Republic: see Austria Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V, Tel. +45 33 29 3333, Fax. +45 33 29 3905 Finland: Sinikalliontie 3, FIN-02630 ESPOO, Tel. +358 9 615 800, Fax. +358 9 6158 0920 France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex, Tel. +33 1 4099 6161, Fax. +33 1 4099 6427 Germany: Hammerbrookstrae 69, D-20097 HAMBURG, Tel. +49 40 2353 60, Fax. +49 40 2353 6300 Hungary: see Austria India: Philips INDIA Ltd, Band Box Building, 2nd floor, 254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025, Tel. +91 22 493 8541, Fax. +91 22 493 0966 Indonesia: PT Philips Development Corporation, Semiconductors Division, Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510, Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080 Ireland: Newstead, Clonskeagh, DUBLIN 14, Tel. +353 1 7640 000, Fax. +353 1 7640 200 Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053, TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007 Italy: PHILIPS SEMICONDUCTORS, Via Casati, 23 - 20052 MONZA (MI), Tel. +39 039 203 6838, Fax +39 039 203 6800 Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku, TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5057 Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL, Tel. +82 2 709 1412, Fax. +82 2 709 1415 Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR, Tel. +60 3 750 5214, Fax. +60 3 757 4880 Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905, Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087 Middle East: see Italy Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB, Tel. +31 40 27 82785, Fax. +31 40 27 88399 New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND, Tel. +64 9 849 4160, Fax. +64 9 849 7811 Norway: Box 1, Manglerud 0612, OSLO, Tel. +47 22 74 8000, Fax. +47 22 74 8341 Pakistan: see Singapore Philippines: Philips Semiconductors Philippines Inc., 106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI, Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474 Poland: Al.Jerozolimskie 195 B, 02-222 WARSAW, Tel. +48 22 5710 000, Fax. +48 22 5710 001 Portugal: see Spain Romania: see Italy Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW, Tel. +7 095 755 6918, Fax. +7 095 755 6919 Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762, Tel. +65 350 2538, Fax. +65 251 6500 Slovakia: see Austria Slovenia: see Italy South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale, 2092 JOHANNESBURG, P.O. Box 58088 Newville 2114, Tel. +27 11 471 5401, Fax. +27 11 471 5398 South America: Al. Vicente Pinzon, 173, 6th floor, 04547-130 SAO PAULO, SP, Brazil, Tel. +55 11 821 2333, Fax. +55 11 821 2382 Spain: Balmes 22, 08007 BARCELONA, Tel. +34 93 301 6312, Fax. +34 93 301 4107 Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM, Tel. +46 8 5985 2000, Fax. +46 8 5985 2745 Switzerland: Allmendstrasse 140, CH-8027 ZURICH, Tel. +41 1 488 2741 Fax. +41 1 488 3263 Taiwan: Philips Semiconductors, 5F, No. 96, Chien Kuo N. Rd., Sec. 1, TAIPEI, Taiwan Tel. +886 2 2134 2451, Fax. +886 2 2134 2874 Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd., 60/14 MOO 11, Bangna Trad Road KM. 3, Bagna, BANGKOK 10260, Tel. +66 2 361 7910, Fax. +66 2 398 3447 Turkey: Yukari Dudullu, Org. San. Blg., 2.Cad. Nr. 28 81260 Umraniye, ISTANBUL, Tel. +90 216 522 1500, Fax. +90 216 522 1813 Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7, 252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461 United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes, MIDDLESEX UB3 5BX, Tel. +44 208 730 5000, Fax. +44 208 754 8421 United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409, Tel. +1 800 234 7381, Fax. +1 800 943 0087 Uruguay: see South America Vietnam: see Singapore Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD, Tel. +381 11 3341 299, Fax.+381 11 3342 553 For all other countries apply to: Philips Semiconductors, Marketing Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825 Internet: http://www.semiconductors.philips.com SCA 70 (c) Philips Electronics N.V. 2000 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613520/03/pp16 Date of release: 2000 Aug 25 Document order number: 9397 750 07226