ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 9
DS 10/2007
H
Heat resistant, please check availlability
hochtemperaturbeständig, Liefermöglichkeiten auf Anfrage
0
P37WF SG1 ...-
P
S
No. of Contacts / Polzahl
Shell size / Gehäusegröße
09
1
15
2
25 37 50
345
Pin contacts / Stiftkontakte
Solder pot /Löttopf
Straight PCB termination / Leiterplattenanschluss, gerade
Wire-wrap / Wire Wrap
Right angled PCB termination / Leiterplattenanschluss, abgewinkelt
Machined contacts / Gedrehte Kontakte
Stamped contacts /Gestanzte Kontakte
For more contacts see page 16 onwards /Weitere Kontakte siehe Seite 16 ff.
Socket contacts / Buchsenkontakte
Contact Design (e. g.) /Kontaktvariante (z. B.)
Contact Type / Kontaktart
Series Prefix / Serienbezeichnung
Insulator /Isolierkörper
Mounting Type /Befestigungsarten
M
W
T
Z
TS
ZS
Standard = Thermoplastic /Thermoplast
Standard / Standard
Polyester glass filled, zinc plated shell, pin connectors without dimples
Polyester, glasfaserverstärkt, Gehäuseoberfläche verzinkt,
Stiftsteckverbinder ohne Kontaktnoppen
Clinch nut 4-40 UNC (see page 59) /Einnietmutter 4-40 UNC (siehe Seite 59)
Clinch nut M3 (see page 59) /Einnietmutter M3 (siehe Seite 59)
Clinch nut 4-40 UNC, self locking (see page 59)
Einnietmutter 4-40 UNC, selbstsichernd (siehe Seite 59)
Clinch nut self locking (see page 59)M3,
Einnietmutter M3, selbstsichernd (siehe Seite 59)
Float mounted (see page 15) /Schwimmend (siehe Seite15)
1
4
5
S
Direction of Right Angled Contacts /Richtung der abgewinkelten Kontakte
Performance Classes Available in Accordance with DIN 41652 /Lieferbare Gütestufen nach DIN 41652
Standard / Standard
Standard insulator / Standardisolierkörper
FM insulator / FM-Isolierkörper
Reverse (Not available with stamped contacts) /Revers (nicht mit gestanzten Kontakten möglich)
R
= 500 =Contact cycles Performance class 1/ /Steckzyklen Gütestufe 1
= 200 =Contact cycles Performance class 2/ /Steckzyklen Gütestufe 2
= 50 =Contact cycles Performance class 3/ /Steckzyklen Gütestufe 3
Pin connector with dimples /Stiftsteckverbinder mit Kontaktnoppen
All connectors are in accordance with the standards of performance class 1; no performance class
number necessary! 1 microinches) Au over Ni)( (51.3 µm
Alle Steckverbinder erfüllen die Anforderungen der Gütestufe 1; Typenbezeichnung ohne Gütestufen!
(1,3 µm Au über Ni)
G2
G1
G3
Modifications /Modifikationen
0
NO PERFORMANCE CLASSES! /KEINE GÜTESTUFEN!
Straight PCB termination /Leiterplattenanschluss, gerade
14
D-Sub Standard Connectors
D-Sub Standard Steckverbinder
Ordering Code
Bestellschlüssel
UL Recognized File No. 168813
10 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
DS 10/2007
Materials and Platings
Materialien und Oberflächen
Shell Steel
Gehäuse Stahl
Type / Type F FH FM
Insulator Polyester, glass filled
(UL94V-0), white
Polyester, heat resistant,
glass filled (UL94V-0), natural
Polyester, glass filled (UL94V-0),
green
Isolierkörper Polyester, glasfaserverstärkt
(UL94V-0), weiß
Polyester,
hochtemperaturbeständig,
glasfaserverstärkt (UL94V-0), natur
Polyester, glasfaserverstärkt
(UL94V-0), grün
Relative temperature index according
to UL 746 B 125 °C (257 °F) 150 °C (302 °F) 130 °C (266 °F)
r
el. Temperaturindex nach
UL 746 B
Heat deflection temperature limit
according to DIN 53461 HDT/A 200 °C (392 °F) 255 °C (491 °F) 210 °C (410 °F)
Formbeständigkeitstemperatur nach
DIN 53461 HDT/A
Sub temperature limit -55 °C (-67 °F) -55 °C (-67 °F) -55 °C (-67 °F)
Untere Grenztemperatur
Shell plating (standard) Tin plated over nickel Yellow chromate over zinc plating
Not RoHS compliant
Gehäuseoberfläche (Standard) verzinnt über Nickel verzinkt und gelb chromatiert
nicht RoHS konform
Shell (standard) Pin connector shell with dimples Pin connector shell without dimples
Gehäuse (Standard) Stiftsteckverbindergehäuse mit Kontaktnoppen Stiftsteckverbindergehäuse ohne
Kontaktnoppen
Shell (K120) Tin plated over nickel, pin connector
shell with dimples
Gehäuse (K120) verzinnt über Nickel,
Stiftsteckverbindergehäuse mit
Kontaktnoppen
Shell (K121) Tin plated over nickel, pin connector
shell without dimples
Gehäuse (K121) verzinnt über Nickel,
Stiftsteckverbindergehäuse ohne
Kontaktnoppen
Contact material Copper alloy
Kontaktmaterial Kupfer-Legierung
Technical Data
Technische Daten
Mechanical Data
Mechanische Daten
Mechanical Data
Mechanische Daten
Mating force per signal contact d
Steckkraft pro Signalkontakt 3,4 N
Unmating force per signal contact t
Ziehkraft pro Signalkontakt 0,2 N
max. torque * 40 Ncm (0,295 ft.lb.)
max. Anzugsmoment * 40 Ncm
* Not for locking screws
* Nicht für Verriegelungsschrauben
Materials and Platings
Materialien und Oberflächen
Electrical Data
Elektrische Daten
Electrical Data
Elektrische Daten
Current rating at room temperature 5 A
Maximale Stromstärke bei Raumtemperatur
Test voltage between 2 contacts / shell and contact 1200 V / 1 min.
Prüfspannung zwischen 2 Kontakten bzw. Kontakt und Gehäuse
Meets transition resistance requirements per contact pair in line with DIN 41652:
Erfüllt Übergangswiderstand pro Kontaktpaar nach DIN 41652 für:
- Straight contacts /gerade Kontakte d 10 m:
- Right angled contacts /abgewinkelte Kontakte d 25 m:
- Right angled contacts - 50 way /abgewinkelte Kontakte bei 50 Polen d 35 m:
Insulation resistance between contacts t
Isolationswiderstand Kontakt / Kontakt 5000 M:
Volume resistivity 10
16
Spezifischer Durchgangswiderstand : cm
Dielectric strength 50 kV / mm
Spezifische Durchschlagsfestigkeit
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 11
DS 10/2007
Contact Arrangements
Polbilder
Face view of pin connector
Blick auf Steckseite Stiftsteckverbinder
Face view of socket connector
Blick auf Steckseite Buchsensteckverbinder
Technical Data
Technische Daten
Modifications
Modifikationen
All FCT D-Sub connectors (including crimp versions etc.) are available in many different combinations of materials and platings. For example, shells can
be supplied in a non – magnetic version made of brass, which can be electroless nickel, or gold plated for use in aerospace technology.
Alle FCT D-Sub Steckverbinder (auch Crimp Versionen, usw.) sind in vielen verschiedenen Material- und Oberflächenkombinationen erhältlich. So z. B.
Gehäuse in nichtmagnetischer Ausführung aus Messing bzw. chemisch vernickelte oder vergoldete Gehäuse für Luft- und Raumfahrtanwendungen.
Shell Size Number of Contacts Pin Connector, Connecting Side
Gehäusegröße Polzahl Stiftsteckverbinder, Ansicht steckseitig
1 9
2 15
3 25
4 37
5 50
12 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
DS 10/2007
Shell Size No. of Contacts A B C D E F G
Gehäusegröße Polzahl ±0,4 - 0,2 ±0,15 -0,2 ±0,4 ±0,3 ±0,3
(±0.016) (- 0.008) (±0.006) (-0.008) (±0.016) (±0.012) (±0.012)
1930,8 16,4 25,0 8,0 12,5 10,8 19,3
(1.213) (0.646) (0.984) (0.315) (0.492) (0.425) (0.760)
215 39,1 24,7 33,3 8,0 12,5 10,8 27,5
(1.539) (0.972) (1.311) (0.315) (0.492) (0.425) (1.083)
325 53,0 38,5 47,04 8,0 12,5 10,8 41,3
(2.087) (1.516) (1.852) (0.315) (0.492) (0.425) (1.626)
437 69,3 54,9 63,5 8,0 12,5 10,8 57,7
(2.728) (2.161) (2.500) (0.315) (0.492) (0.425) (2.272)
550 66,9 52,5 61,1 10,8 15,4 13,7 55,3
(2.634) (2.067) (2.406) (0.425) (0.606) (0.539) (2.177)
Shell Size No. of Contacts A B C D E F G
Gehäusegröße Polzahl ±0,4 +0,2 ±0,15 +0,2 ±0,4 ±0,3 ±0,3
(±0.016) (+0.008) (±0.006) (+0.008) (±0.016) (± 0.012) (±0.012)
1930,8 16,9 25,0 8,2 12,5 10,8 19,3
(1.213) (0.665) (0.984) (0.323) (0.492) (0.425) (0.760)
215 39,1 25,2 33,3 8,2 12,5 10,8 27,5
(1.539) (0.992) (1.311) (0.323) (0.492) (0.425) (1.083)
325 53,0 38,9 47,04 8,2 12,5 10,8 41,3
(2.087) (1.531) (1.852) (0.323) (0.492) (0.425) (1.626)
437 69,3 55,3 63,5 8,2 12,5 10,8 57,7
(2.728) (2.177) (2.500) (0.323) (0.492) (0.425) (2.272)
550 66,9 52,8 61,1 11,0 15,4 13,7 55,3
(2.634) (2.079) (2.406) (0.433) (0.606) (0.539) (2.177)
Shell Dimensions
Gehäuseabmessungen
Stiftsteckverbindergehäuse
Pin Connector Shell
Buchsensteckverbindergehäuse
Socket Connector Shell
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 13
DS 10/2007
0.2
0.008
0.087
2.2
0.016
0.4
0.161
4.1
0.4
0.016
2.9
±0.10
0.114
±0.004
0.087
2.2
0.008
0.2
4.1
0.161
0.016
0.40.4
0.016
2.9
±0.10
0.114
±0.004
Panel Cut-Out
Montageausschnitt
Standard, Front Mounted Float, Front Mounted (Series FW)
Standard, frontseitig montiert Schwimmend, frontseitig montiert (Baureihe FW)
Shell Size A B C
Gehäusegröße ±0,2 (±0.008) ±0,1 (±0.004) ±0,2 (±0.008)
1 22,2 (0.874) 25,0 (0.984) 12,3 (0.484)
2 30,5 (1.201) 33,3 (1.311) 12,3 (0.484)
3 44,3 (1.744) 47,0 (1.850) 12,3 (0.484)
4 60,7 (2.390) 63,5 (2.500) 12,3 (0.484)
5 58,3 (2.295) 61,1 (2.406) 15,1 (0.594)
Shell Size Mounting Ø D
Gehäusegröße Befestigung ±0,05 (±0.002)
1 - 5 Standard /Standard 3,1 (0.122)
1 - 5 Float mounted /schwimmend 2,2 (0.087)
Rear Mounted
Rückseitig montiert
Float, Rear Mounted (Series FW)
Schwimmend, rückseitig montiert (Baureihe FW)
Standard, Rear Mounted
Standard, rückseitig montiert
Frontseitig montiert
Front Mounted
Shell Size A B C
Gehäusegröße ±0,2 (±0.008) ±0,1 (±0.004) ±0,2 (±0.008)
1 20,5 (0.807) 25,0 (0.984) 11,4 (0.449)
2 28,8 (1.134) 33,3 (1.311) 11,4 (0.449)
3 42,5 (1.673) 47,0 (1.850) 11,4 (0.449)
4 59,1 (2.327) 63,5 (2.500) 11,4 (0.449)
5 56,3 (2.217) 61,1 (2.406) 14,1 (0.555)
Shell Size Mounting Ø D
Gehäusegröße Befestigung ±0,05 (±0.002)
1 - 5 Standard /Standard 3,1 (0.122)
1 - 5 float mounted /schwimmend 2,2 (0.087)
14 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
DS 10/2007
Tilt Angle for Connector Mating
Schräglage zur Steckrichtung
Pulling Range
Fangbereich
Mounting and Mating Instructions
Montage- und Steckhinweise
Dimension for Safe Contact Area
Maß für sicheren Kontaktbereich
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 15
DS 10/2007
Mounting Combinations
Befestigungsmöglichkeiten
Figure 1
Figure 3
Abbildung 3
Figure 5
Abbildung 5
Figure 6
Abbildung 6
Figure 4
Abbildung 4
Abbildung 1
Figure 2
Abbildung 2
Combinations
Kombinationsmöglichkeiten
Figure Pin Socket
Abbildung Stift Buchse
1standard standard
2standard standard
3standard Float mounted
schwimmend
4standard Float mounted
schwimmend
5Float mounted
schwimmend
Float mounted
schwimmend
6Float mounted
schwimmend
Float mounted
schwimmend
16 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
DS 10/2007
Straight PCB Termination Ø 0.6 mm (Ø 0.024“)
Gerader Leiterplattenanschluss Ø 0,6 mm
Straight PCB Termination Ø 0.76 mm (Ø 0.030“)
Gerader Leiterplattenanschluss Ø 0,76 mm
Wire-Wrap Termination 0.6 mm (
0.024“)
Wire Wrap Anschluss 0,6 mm
Straight PCB Termination Ø 1.0 mm (Ø 0.039“ )
Gerader Leiterplattenanschluss Ø 1,0 mm
No Compliant Pressfit Termination 0.8 mm ( 0.031“)
Massiver Einpressanschluss 0,8 mm
For PCB thickness 1.6 mm (0.063“)
Für Leiterplattenstärke 1,6 mm
Straight Signal Contacts
Gerade Signalkontakte
Stamped Contacts with Solder Pot Termination AWG 20
Gestanzter Kontakt mit Löttopfanschluss AWG 20 Kontaktlamellenanschluss
Line Contact Termination
Solder Pot Termination AWG 20
Löttopfanschluss AWG 20
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 17
DS 10/2007
Pin contact on request
Stiftkontakt auf Anfrage
Spacing 2.54 mm (0.100”), Ø 0.6 mm (Ø 0.024“)
Reihenabstand 2,54 mm, Ø 0,6 mm
Right Angled Signal Contacts (PCB Termination)
Abgewinkelte Signalkontakte (Leiterplattenanschluss)
18 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
DS 10/2007
Spacing 2.54 mm (0.100”), Ø 0.6 mm (Ø 0.024“), Short Plug
Reihenabstand 2,54 mm, Ø 0,6 mm, verkürzte Steckseite
Spacing 2.54 mm (0.100”), Ø 0.76 mm (Ø 0.030“ )
Reihenabstand 2,54 mm, Ø 0,76 mm
Spacing 2.54 mm (0.100”), Stamped Contact
Reihenabstand 2,54 mm, gestanzter Kontakt
Spacing 2.84 mm (0.112”), Ø 0.6 mm (Ø 0.024“)
Reihenabstand 2,84 mm, Ø 0,6 mm
Spacing 2.84 mm (0.112”), Ø 0.76 mm (Ø 0.030“)
Reihenabstand 2,84 mm, Ø 0,76 mm
Spacing 2.84 mm (0.112”), Ø 0.6 mm (Ø 0.024“)
Reihenabstand 2,84 mm, Ø 0,6 mm
Right Angled Signal Contacts (PCB Termination)
Abgewinkelte Signalkontakte (Leiterplattenanschluss)
Available as a pin contact only
Nur als Stiftkontakt verfügbar
Pin contact on request
Stiftkontakt auf Anfrage
Only in combination with plastic brackets.
Nur in Verbindung mit Kunststoffbefestigungswinkel.
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE 19
DS 10/2007
Stiftsteckverbinder, 25-polig, abgewinkelter Leiterplattenanschluss
(entgegengesetzt), Reihenabstand 2,54 mm, Ø 0,6 mm, Gütestufe 1.
F25P5RG1
Pin connector, 25 contacts, right angled PCB termination (reversed),
spacing 2.54 mm (0.100”), Ø 0.6 mm (Ø 0.024“), performance class 1:
F25P5RG1
Pin connector, 25 contacts, right angled PCB termination, spacing
2.54 mm (0.100”), Ø 0.6 mm (Ø 0.024“), performance class 1:
F25P5G1
Stiftsteckverbinder, 25-polig, abgewinkelter Leiterplattenanschluss,
2,54 mm Reihenabstand, Ø 0,6 mm, Gütestufe 1:
F25P5G1
Direction of Right Angled Signal Contacts
Richtung der abgewinkelten Signalkontakte
Standard
Standard
Reverse
Revers
Ordering Example
Bestellbeispiel
Ordering Example
Bestellbeispiel
20 TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
DS 10/2007
0
1.40 0.055
4.14 0.163
6.91 0.272
9.68 0.381
0.81520.70
15.19 0.598
0.48912.42
0.65216.56
0
2.77 0.109
5.54 0.218
8.28 0.326
11.05 0.435
13.82 0.544
17.96 0.707
19.33 0.761
22.10 0.870
30.55 1.203
0.1122.840.1002.54
0.1122.84
2.54 0.100
1 0.039
0
2.74 0.108
0.49212.50
0
1.37 0.054
4.11 0.162
5.49 0.216
1 0.039
2.54 0.100
2.84 0.112
0
1.37 0.054
4.11 0.162
6.86 0.270
9.60 0.378
0
2.74 0.108
5.49 0.216
8.23 0.324
16.65 0.656
2.54 0.100
0.0391
2.84 0.112
0
2.77 0.109
5.54 0.218
8.28 0.326
11.05 0.435
13.82 0.544
16.56 0.652
0
1.40 0.055
4.14 0.163
6.91 0.272
9.68 0.381
12.42 0.489
15.19 0.598
23.52 0.926
2.84 0.112
0.1002.54
1 0.039
0
2.77 0.109
5.54 0.218
8.28 0.326
11.05 0.435
13.82 0.544
16.56 0.652
0
1.40 0.055
4.14 0.163
6.91 0.272
19.33 0.761
22.10 0.870
24.84 0.978
9.68 0.381
12.42 0.489
15.19 0.598
0.81520.70
0.92423.47
17.96 0.707
31.75 1.250
2.84 0.112
0.1002.54
1 0.039
Row Spacing
Reihenabstand
Right Angled Contacts Straight Contacts
Abgewinkelte Kontakte Gerade Kontakte
2.54 mm (0.100"), except for contact design
nos. 12, 41 and 69, here: 2.84 mm (0.112") 2,84 mm
2,54 mm, außer bei den Kontaktvarianten
12 ,41 und 69, dort: 2,84 mm
(0.112)
For the diameter of assembly drillings, please see
assembly parts page 62 onwards.
Für die Durchmesser der Montagebohrungen siehe
Anbauteile ab Seite 62.
PCB Hole Patterns According to DIN 41652
Leiterplattenlochbilder nach DIN 41652
9 Contacts
9-polig
15 Contacts
15-polig
25 Contacts
25-polig
37 Contacts
37-polig
50 Contacts
50-polig