To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, afliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Afrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
January 2015
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
FDMF6840C Extra-Small, High-Performance,
High-Frequency DrMOS Module
Benefits
Ultra-Compact 6x6 mm PQFN, 72% Space-Saving
Compared to Conventional Discrete Solutions
Fully Optimized System Efficiency
Clean Switching Waveforms with Minimal Ringing
High-Current Handling
Features
Over 93% Peak-Efficiency
High-Current Handling: 50 A
High-Performance PQFN Copper-Clip Package
3-State 3.3 V PWM Input Driver
Skip-Mode SMOD# (Low-Side Gate Turn Off) Input
Thermal Warning Flag for Over-Temperature
Condition
Driver Output Disable Function (DISB# Pin)
Internal Pull-Up and Pull-Down for SMOD# and
DISB# Inputs, Respectively
Fairchild PowerTrench® Technology MOSFETs for
Clean Voltage Waveforms and Reduced Ringing
Fairchild SyncFET (Integrated Schottky Diode)
Technology in Low-Side MOSFET
Integrated Bootstrap Schottky Diode
Adaptive Gate Drive Timing for Shoot-Through
Protection
Under-Voltage Lockout (UVLO)
Optimized for Switching Frequencies up to 1 MHz
Low-Profile SMD Package
Fairchild Green Packaging and RoHS Compliance
Based on the Intel® 4.0 DrMOS Standard
Description
The XS DrMOS family is Fairchild’s next-generation,
fully optimized, ultra-compact, integrated MOSFET plus
driver power stage solution for high-current, high-
frequency, synchronous buck DC-DC applications. The
FDMF6840C integrates a driver IC, two power
MOSFETs, and a bootstrap Schottky diode into a
thermally enhanced, ultra-compact 6x6 mm package.
With an integrated approach, the complete switching
power stage is optimized with regard to driver and
MOSFET dynamic performance, system inductance,
and power MOSFET RDS(ON). XS DrMOS uses
Fairchild's high-performance PowerTrench® MOSFET
technology, which dramatically reduces switch ringing,
eliminating the need for snubber circuit in most buck
converter applications.
A driver IC with reduced dead times and propagation
delays further enhances the performance. A thermal
warning function warns of a potential over-temperature
situation. The FDMF6840C also incorporates a Skip
Mode (SMOD#) for improved light-load efficiency. The
FDMF6840C also provides a 3-state 3.3 V PWM input
for compatibility with a wide range of PWM controllers.
Applications
High-Performance Gaming Motherboards
Compact Blade Servers, V-Core and Non-V-Core
DC-DC Converters
Desktop Computers, V-Core and Non-V-Core
DC-DC Converters
Workstations
High-Current DC-DC Point-of-Load Converters
Networking and Telecom Microprocessor Voltage
Regulators
Small Form-Factor Voltage Regulator Modules
Ordering Information
Part Number
Current Rating
Package
Top Mark
FDMF6840C
50 A
40-Lead, Clipbond PQFN DrMOS, 6.0 mm x 6.0 mm Package
FDMF6840C
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 2
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Typical Application Circuit
Figure 1. Typical Application Circuit
DrMOS Block Diagram
Figure 2. DrMOS Block Diagram
SMOD#
VCIN
VDRV
VIN
PGND
PHASE
GH
D
Boot
BOOT
GL
CGND
DISB#
THWN#
Q1
HS Power
MOSFET
Input
3
-
State
Logic
RUP_PWM
VCIN
VCIN
UVLO
GH
Logic
Level-Shift
Dead-Time
Control
Temp.
Sense
30k
GL
Logic
10µA
10µA
RDN_PWM
Q2
LS Power
MOSFET
VSWH
VDRV
30k
VOUT
PWM Input
VDRV
VCIN
VIN
PWM
DISB#
OFF
ON
CVDRV
CVIN
CBOOT
RBOOT
LOUT
COUT
THWN#
BOOT
CGND
PGND
DISB#
FDMF6840C
SMOD#
Open-Drain
Output
PHASE
V5V
VSWH
VIN
3V ~ 16V
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 3
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Pin Configuration
12345678910
30 29 28 27 26 25 24 23 22 21
31323334353637383940
20 19 18 17 16 15 14 13 12 11
VSWH
43
VIN
42
CGND
41
SMOD#
VCIN
VDRV
BOOT
CGND
GH
PHASE
NC
VIN
VIN
VIN
VIN
VIN
VIN
VSWH
PGND
PGND
PGND
PGND
PGND
VSWH
VSWH
PGND
PGND
PGND
PGND
PGND
PGND
PGND
PGND
PWM
DISB#
THWN#
CGND
GL
VSWH
VSWH
VSWH
VSWH
VSWH
12345678910
30292827262524232221
31 32 33 34 35 36 37 38 39 40
20191817161514131211
VSWH
43
VIN
42 CGND
41
SMOD#
VCIN
VDRV
BOOT
CGND
GH
PHASE
NC
VIN
VIN
VIN
VIN
VIN
VIN
VSWH
PGND
PGND
PGND
PGND
PGND
VSWH
VSWH
PGND
PGND
PGND
PGND
PGND
PGND
PGND
PGND
PWM
DISB#
THWN#
CGND
GL
VSWH
VSWH
VSWH
VSWH
VSWH
Figure 3. Bottom View
Figure 4. Top View
Pin Definitions
Pin #
Name
Description
1
SMOD#
When SMOD#=HIGH, the low-side driver is the inverse of the PWM input. When
SMOD#=LOW, the low-side driver is disabled. This pin has a 10 µA internal pull-up current
source. Do not add a noise filter capacitor.
2
VCIN
IC bias supply. Minimum 1 µF ceramic capacitor is recommended from this pin to CGND.
3
VDRV
Power for the gate driver. Minimum 1 µF ceramic capacitor is recommended to be connected
as close as possible from this pin to CGND.
4
BOOT
Bootstrap supply input. Provides voltage supply to the high-side MOSFET driver. Connect a
bootstrap capacitor from this pin to PHASE.
5, 37, 41
CGND
IC ground. Ground return for driver IC.
6
GH
For manufacturing test only. This pin must float; it must not be connected to any pin.
7
PHASE
Switch node pin for bootstrap capacitor routing. Electrically shorted to VSWH pin.
8
NC
No connect. The pin is not electrically connected internally, but can be connected to VIN for
convenience.
9 - 14, 42
VIN
Power input. Output stage supply voltage.
15, 29 -
35, 43
VSWH
Switch node input. Provides return for high-side bootstrapped driver and acts as a sense point
for the adaptive shoot-through protection.
16 28
PGND
Power ground. Output stage ground. Source pin of the low-side MOSFET.
36
GL
For manufacturing test only. This pin must float; it must not be connected to any pin.
38
THWN#
Thermal warning flag, open collector output. When temperature exceeds the trip limit, the
output is pulled LOW. THWN# does not disable the module.
39
DISB#
Output disable. When LOW, this pin disables the power MOSFET switching (GH and GL are
held LOW). This pin has a 10 µA internal pull-down current source. Do not add a noise filter
capacitor.
40
PWM
PWM signal input. This pin accepts a three-state 3.3 V PWM signal from the controller.
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 4
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Absolute Maximum Ratings
Stresses exceeding the Absolute Maximum Ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
VCIN
Supply Voltage
Referenced to CGND
-0.3
6.0
V
VDRV
Drive Voltage
Referenced to CGND
-0.3
6.0
V
VDISB#
Output Disable
Referenced to CGND
-0.3
6.0
V
VPWM
PWM Signal Input
Referenced to CGND
-0.3
6.0
V
VSMOD#
Skip Mode Input
Referenced to CGND
-0.3
6.0
V
VGL
Low Gate Manufacturing Test Pin
Referenced to CGND
-0.3
6.0
V
VTHWN#
Thermal Warning Flag
Referenced to CGND
-0.3
6.0
V
VIN
Power Input
Referenced to PGND, CGND
-0.3
25.0
V
VBOOT
Bootstrap Supply
Referenced to VSWH, PHASE
-0.3
6.0
V
Referenced to CGND
-0.3
25.0
V
VGH
High Gate Manufacturing Test Pin
Referenced to VSWH, PHASE
-0.3
6.0
V
Referenced to CGND
-0.3
25.0
V
VPHS
PHASE
Referenced to CGND
-0.3
25.0
V
VSWH
Switch Node Input
Referenced to PGND, CGND (DC Only)
-0.3
25.0
V
Referenced to PGND, <20 ns
-8.0
28.0
V
VBOOT
Bootstrap Supply
Referenced to VDRV
22.0
V
Referenced to VDRV, <20 ns
25.0
V
ITHWN#
THWN# Sink Current
-0.1
7.0
mA
IO(AV)
Output Current(1)
fSW=300 kHz, VIN=12 V, VO=1.0 V
50
A
fSW=1 MHz, VIN=12 V, VO=1.0 V
45
θJPCB
Junction-to-PCB Thermal Resistance
2.7
°C/W
TA
Ambient Temperature Range
-40
+125
°C
TJ
Maximum Junction Temperature
+150
°C
TSTG
Storage Temperature Range
-55
+150
°C
ESD
Electrostatic Discharge Protection
Human Body Model, JESD22-A114
2000
V
Charged Device Model, JESD22-C101
2500
Note:
1. IO(AV) is rated using Fairchild’s DrMOS evaluation board, at TA = 25°C, with natural convection cooling. This rating
is limited by the peak DrMOS temperature, TJ = 150°C, and varies depending on operating conditions and PCB
layout. This rating can be changed with different application settings.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
Min.
Typ.
Max.
Unit
VCIN
Control Circuit Supply Voltage
4.5
5.0
5.5
V
VDRV
Gate Drive Circuit Supply Voltage
4.5
5.0
5.5
V
VIN
Output Stage Supply Voltage
3.0
12.0
16.0(2)
V
Note:
2. Operating at high VIN can create excessive AC overshoots on the VSWH-to-GND and BOOT-to-GND nodes
during MOSFET switching transients. For reliable DrMOS operation, VSWH-to-GND and BOOT-to-GND must
remain at or below the Absolute Maximum Ratings shown in the table above. Refer to the Application
Information and PCB Layout Guidelines sections of this datasheet for additional information.
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 5
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Electrical Characteristics
Typical values are VIN = 12 V, VCIN = 5 V, VDRV = 5 V, and TA = TJ = +25°C unless otherwise noted.
Symbol
Parameter
Condition
Min.
Typ.
Max.
Unit
Basic Operation
IQ
Quiescent Current
IQ=IVCIN+IVDRV, PWM=LOW or HIGH or Float
2
mA
VUVLO
UVLO Threshold
VCIN Rising
2.9
3.1
3.3
V
VUVLO_Hys
UVLO Hysteresis
0.4
V
PWM Input (VCIN = VDRV = 5 V ±10%)
RUP_PWM
Pull-Up Impedance
VPWM=5 V
26
RDN_PWM
Pull-Down Impedance
VPWM=0 V
12
VIH_PWM
PWM High Level Voltage
1.88
2.25
2.61
V
VTRI_HI
3-State Upper Threshold
1.84
2.20
2.56
V
VTRI_LO
3-State Lower Threshold
0.70
0.95
1.19
V
VIL_PWM
PWM Low Level Voltage
0.62
0.85
1.13
V
tD_HOLD-OFF
3-State Shut-Off Time
160
200
ns
VHiZ_PWM
3-State Open Voltage
1.40
1.60
1.90
V
PWM Input (VCIN = VDRV = 5 V ±5%)
RUP_PWM
Pull-Up Impedance
VPWM=5 V
26
RDN_PWM
Pull-Down Impedance
VPWM=0 V
12
VIH_PWM
PWM High Level Voltage
2.00
2.25
2.50
V
VTRI_HI
3-State Upper Threshold
1.94
2.20
2.46
V
VTRI_LO
3-State Lower Threshold
0.75
0.95
1.15
V
VIL_PWM
PWM Low Level Voltage
0.66
0.85
1.09
V
tD_HOLD-OFF
3-State Shut-Off Time
160
200
ns
VHiZ_PWM
3-State Open Voltage
1.45
1.60
1.80
V
DISB# Input
VIH_DISB
High-Level Input Voltage
2
V
VIL_DISB
Low-Level Input Voltage
0.8
V
IPLD
Pull-Down Current
10
µA
tPD_DISBL
Propagation Delay
PWM=GND, Delay Between DISB# from
HIGH to LOW to GL from HIGH to LOW
25
ns
tPD_DISBH
Propagation Delay
PWM=GND, Delay Between DISB# from
LOW to HIGH to GL from LOW to HIGH
25
ns
SMOD# Input
VIH_SMOD
High-Level Input Voltage
2
V
VIL_SMOD
Low-Level Input Voltage
0.8
V
IPLU
Pull-Up Current
10
µA
tPD_SLGLL
Propagation Delay
PWM=GND, Delay Between SMOD# from
HIGH to LOW to GL from HIGH to LOW
10
ns
tPD_SHGLH
Propagation Delay
PWM=GND, Delay Between SMOD# from
LOW to HIGH to GL from LOW to HIGH
10
ns
Continued on the following page…
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 6
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Electrical Characteristics
Typical values are VIN = 12 V, VCIN = 5 V, VDRV = 5 V, and TA = TJ = +25°C unless otherwise noted.
Symbol
Parameter
Condition
Min.
Typ.
Max.
Unit
Thermal Warning Flag
TACT
Activation Temperature
150
°C
TRST
Reset Temperature
135
°C
RTHWN
Pull-Down Resistance
IPLD=5 mA
30
Ω
High-Side Driver (fSW = 1000 kHz, IOUT = 30 A, TA = +25°C)
RSOURCE_GH
Output Impedance, Sourcing
Source Current=100 mA
1
Ω
RSINK_GH
Output Impedance, Sinking
Sink Current=100 mA
0.8
Ω
tR_GH
Rise Time
GH=10% to 90%
10
ns
tF_GH
Fall Time
GH=90% to 10%
10
ns
tD_DEADON
LS to HS Deadband Time
GL Going LOW to GH Going HIGH,
1.0 V GL to 10% GH
15
ns
tPD_PLGHL
PWM LOW Propagation
Delay
PWM Going LOW to GH Going LOW,
VIL_PWM to 90% GH
20
30
ns
tPD_PHGHH
PWM HIGH Propagation
Delay (SMOD# =0)
PWM Going HIGH to GH Going HIGH,
VIH_PWM to 10% GH (SMOD# =0, ID_LS>0)
30
ns
tPD_TSGHH
Exiting 3-State Propagation
Delay
PWM (From 3-State) Going HIGH to GH
Going HIGH, VIH_PWM to 10% GH
30
ns
Low-Side Driver (fSW = 1000 kHz, IOUT = 30 A, TA = +25°C)
RSOURCE_GL
Output Impedance, Sourcing
Source Current=100 mA
1
Ω
RSINK_GL
Output Impedance, Sinking
Sink Current=100 mA
0.5
Ω
tR_GL
Rise Time
GL=10% to 90%
20
ns
tF_GL
Fall Time
GL=90% to 10%
10
ns
tD_DEADOFF
HS to LS Deadband Time
SW Going LOW to GL Going HIGH,
2.2 V SW to 10% GL
15
ns
tPD_PHGLL
PWM-HIGH Propagation
Delay
PWM Going HIGH to GL Going LOW,
VIH_PWM to 90% GL
10
25
ns
tPD_TSGLH
Exiting 3-State Propagation
Delay
PWM (From 3-State) Going LOW to GL
Going HIGH, VIL_PWM to 10% GL
20
ns
Boot Diode
VF
Forward-Voltage Drop
IF=20 mA
0.3
V
VR
Breakdown Voltage
IR=1 mA
22
V
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 7
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Timing Diagram
Figure 5. PWM Timing Diagram
t
D_DEADON
PWM
VSWH
GH
to
VSWH
GL
t
PD_PHGLL
t
D_DEADOFF
V
IH_PWM
V
IL_PWM
90%
90%
1.0V
10%
t
PD_PLGHL
10%
1.2V
2.2V
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 8
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Typical Performance Characteristics
Test Conditions: VIN=12 V, VOUT=1 V, VCIN=5 V, VDRV=5 V, LOUT=250 nH, TA=25°C, and natural convection cooling,
unless otherwise specified.
Figure 6. Safe Operating Area
Figure 7. Power Loss vs. Output Current
Figure 8. Power Loss vs. Switching Frequency
Figure 9. Power Loss vs. Input Voltage
Figure 10. Power Loss vs. Driver Supply Voltage
Figure 11. Power Loss vs. Output Voltage
0
5
10
15
20
25
30
35
40
45
50
025 50 75 100 125 150
Module Output Current, IOUT (A)
PCB Temperature, TPCB ( C)
FSW = 300kHz
FSW = 1000kHz
VIN = 12V, VDRV & VCIN = 5V, VOUT = 1V
0
1
2
3
4
5
6
7
8
9
10
11
0 5 10 15 20 25 30 35 40 45
Module Power Loss, PLMOD (W)
Module Output Current, IOUT (A)
300kHz
500kHz
800kHz
1000kHz
VIN = 12V, VDRV & VCIN = 5V, VOUT = 1V
0.9
1.0
1.1
1.2
1.3
1.4
1.5
100 200 300 400 500 600 700 800 900 1000 1100
Normalized Module Power Loss
Module Switching Frequency, FSW (kHz)
VIN = 12V, VDRV & VCIN = 5V, VOUT = 1V, IOUT = 30A
0.98
1.00
1.02
1.04
1.06
1.08
4 6 8 10 12 14 16 18
Normalized Module Power Loss
Module Input Voltage, VIN (V)
VDRV & VCIN = 5V, VOUT = 1V, FSW = 300kHz, IOUT = 30A
0.90
0.95
1.00
1.05
1.10
1.15
4.0 4.5 5.0 5.5 6.0
Normalized Module Power Loss
Driver Supply Voltage, VDRV & VCIN (V)
VIN = 12V, VOUT = 1V, FSW = 300kHz, IOUT = 30A
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Normalized Module Power Loss
Module Output Voltage, VOUT (V)
VIN = 12V, VDRV & VCIN = 5V, FSW = 300kHz, IOUT = 30A
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 9
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Typical Performance Characteristics
Test Conditions: VIN=12 V, VOUT=1 V, VCIN=5 V, VDRV=5 V, LOUT=250 nH, TA=25°C, and natural convection cooling,
unless otherwise specified.
Figure 12. Power Loss vs. Output Inductor
Figure 13. Driver Supply Current vs. Switching
Frequency
Figure 14. Driver Supply Current vs. Driver Supply
Voltage
Figure 15. Driver Supply Current vs. Output
Current
Figure 16. UVLO Threshold vs. Temperature
Figure 17. PWM Threshold vs. Driver Supply Voltage
0.96
0.97
0.98
0.99
1.00
1.01
200 250 300 350 400 450 500
Normalized Module Power Loss
Output Inductor, LOUT (nH)
VIN = 12V, VDRV & VCIN = 5V, FSW = 300kHz, VOUT = 1V, IOUT = 30A
5
10
15
20
25
30
35
40
45
100 200 300 400 500 600 700 800 900 1000 1100
Driver Supply Current, IDRV & ICIN (mA)
Module Switching Frequency, FSW (kHz)
VIN = 12V, VDRV & VCIN = 5V, VOUT = 1V, IOUT = 0A
10
11
12
13
14
15
16
17
4.0 4.5 5.0 5.5 6.0
Driver Supply Current, IDRV & ICIN (mA)
Driver Supply Voltage, VDRV & VCIN (V)
VIN = 12V, VOUT = 1V, FSW = 300kHz, IOUT = 0A
0.98
0.99
1.00
1.01
1.02
1.03
1.04
0 5 10 15 20 25 30 35 40 45
Normalized Driver Supply Current
Module Output Current, IOUT (A)
VIN = 12V, VDRV & VCIN = 5V, VOUT = 1V
FSW = 300kHz
FSW = 1000kHz
2.6
2.7
2.8
2.9
3.0
3.1
3.2
-55
0
25
55
100
125
150
Driver IC Supply Voltage, VCIN (V)
Driver IC Junction Temperature, TJ(oC)
UVLOUP
UVLODN
0.5
1.0
1.5
2.0
2.5
3.0
4.50 4.75 5.00 5.25 5.50
PWM Threshold Voltage, VPWM (V)
Driver IC Supply Voltage, VCIN (V)
VTRI_HI
VIH_PWM
TA= 25°C
VTRI_LO
VIL_PWM
VHIZ_PWM
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 10
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Typical Performance Characteristics
Test Conditions: VCIN=5 V, VDRV=5 V, TA=25°C, and natural convection cooling, unless otherwise specified.
Figure 18. PWM Threshold vs. Temperature
Figure 19. SMOD# Threshold vs. Driver Supply
Voltage
Figure 20. SMOD# Threshold vs. Temperature
Figure 21. SMOD# Pull-Up Current vs. Temperature
Figure 22. DISB# Threshold vs. Driver Supply
Voltage
Figure 23. DISB# Threshold vs. Temperature
0.5
1.0
1.5
2.0
2.5
3.0
-55
0
25
55
100
125
150
PWM Threshold Voltage, VPWM (V)
Driver IC Junction Temperature, TJ(oC)
VCIN = 5V
VIH_PWM
VTRI_HI
VHIZ_PWM
VTRI_LO
VIL_PWM
1.2
1.4
1.6
1.8
2.0
2.2
4.50 4.75 5.00 5.25 5.50
SMOD# Threshold Voltage, VSMOD (V)
Driver IC Supply Voltage, VCIN (V)
VIH_SMOD#
VIL_SMOD#
TA= 25°C
1.2
1.4
1.6
1.8
2
2.2
-55
0
25
55
100
125
150
SMOD# Threshold Voltage, VSMOD (V)
Driver IC Junction Temperature, TJ(oC)
VIH_SMOD#
VIL_SMOD#
VCIN = 5V
-12.0
-11.5
-11.0
-10.5
-10.0
-9.5
-9.0
-55
0
25
55
100
125
150
SMOD# Pull-Up Current, IPLU (uA)
Driver IC Junction Temperature, TJ(oC)
VCIN = 5V
1.2
1.4
1.6
1.8
2.0
2.2
4.50 4.75 5.00 5.25 5.50
DISB# Threshold Voltage, VDISB (V)
Driver IC Supply Voltage, VCIN (V)
VIH_DISB#
VIL_DISB#
TA= 25°C
1.2
1.4
1.6
1.8
2.0
2.2
-55
0
25
55
100
125
150
DISB# Threshold Voltage, VDISB (V)
Driver IC Junction Temperature, TJ(oC)
VIH_DISB#
VIL_DISB#
VCIN = 5V
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 11
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Typical Performance Characteristics
Test Conditions: VCIN=5 V, VDRV=5 V, TA=25°C, and natural convection cooling, unless otherwise specified.
Figure 24. DISB# Pull-Down Current vs.
Temperature
Figure 25. Boot Diode Forward Voltage vs.
Temperature
9.0
9.5
10.0
10.5
11.0
11.5
12.0
-55
0
25
55
100
125
150
DISB# Pull-Down Current, IPLD (uA)
Driver IC Junction Temperature, TJ(oC)
VCIN = 5V
100
150
200
250
300
350
400
450
500
-55
0
25
55
100
125
150
Boot Diode Forward Voltage, VF(mV)
Driver IC Junction Temperature, TJ(oC)
IF= 20mA
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 12
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Functional Description
The FDMF6840C is a driver-plus-FET module optimized
for the synchronous buck converter topology. A single
PWM input signal is all that is required to properly drive
the high-side and the low-side MOSFETs. Each part is
capable of driving speeds up to 1 MHz.
VCIN and Disable (DISB#)
The VCIN pin is monitored by an Under-Voltage Lockout
(UVLO) circuit. When VCIN rises above ~3.1 V, the driver
is enabled. When VCIN falls below ~2.7 V, the driver is
disabled (GH, GL=0). The driver can also be disabled by
pulling the DISB# pin LOW (DISB# < VIL_DISB), which
holds both GL and GH LOW regardless of the PWM
input state. The driver can be enabled by raising the
DISB# pin voltage HIGH (DISB# > VIH_DISB).
Table 1. UVLO and Disable Logic
UVLO
DISB#
Driver State
0
X
Disabled (GH, GL=0)
1
0
Disabled (GH, GL=0)
1
1
Enabled (see Table 2)
1
Open
Disabled (GH, GL=0)
Note:
3. DISB# internal pull-down current source is 10 µA.
Thermal Warning Flag (THWN#)
The FDMF6840C provides a thermal warning flag
(THWN#) to warn of over-temperature conditions. The
thermal warning flag uses an open-drain output that
pulls to CGND when the activation temperature (150°C)
is reached. The THWN# output returns to a high-
impedance state once the temperature falls to the reset
temperature (135°C). For use, the THWN# output
requires a pull-up resistor, which can be connected to
VCIN. THWN# does NOT disable the DrMOS module.
Figure 26. THWN Operation
Three-State PWM Input
The FDMF6840C incorporates a three-state 3.3 V PWM
input gate drive design. The three-state gate drive has
both logic HIGH level and LOW level, along with a
three-state shutdown window. When the PWM input
signal enters and remains within the three-state window
for a defined hold-off time (tD_HOLD-OFF), both GL and GH
are pulled LOW. This enables the gate drive to shut
down both high-side and low-side MOSFETs to support
features such as phase shedding, which is common on
multi-phase voltage regulators.
Exiting Three-State Condition
When exiting a valid three-state condition, the
FDMF6840C follows the PWM input command. If the
PWM input goes from three-state to LOW, the low-side
MOSFET is turned on. If the PWM input goes from
three-state to HIGH, the high-side MOSFET is turned
on. This is illustrated in Figure 27. The FDMF6840C
design allows for short propagation delays when exiting
the three-state window (see Electrical Characteristics).
Low-Side Driver
The low-side driver (GL) is designed to drive a ground-
referenced, low-RDS(ON), N-channel MOSFET. The bias
for GL is internally connected between the VDRV and
CGND pins. When the driver is enabled, the driver's
output is 180° out of phase with the PWM input. When
the driver is disabled (DISB#=0 V), GL is held LOW.
High-Side Driver
The high-side driver (GH) is designed to drive a floating
N-channel MOSFET. The bias voltage for the high-side
driver is developed by a bootstrap supply circuit
consisting of the internal Schottky diode and external
bootstrap capacitor (CBOOT). During startup, VSWH is held
at PGND, allowing CBOOT to charge to VDRV through the
internal diode. When the PWM input goes HIGH, GH
begins to charge the gate of the high-side MOSFET (Q1).
During this transition, the charge is removed from CBOOT
and delivered to the gate of Q1. As Q1 turns on, VSWH
rises to VIN, forcing the BOOT pin to VIN + VBOOT, which
provides sufficient VGS enhancement for Q1. To complete
the switching cycle, Q1 is turned off by pulling GH to
VSWH. CBOOT is then recharged to VDRV when VSWH falls to
PGND. GH output is in-phase with the PWM input. The
high-side gate is held LOW when the driver is disabled or
the PWM signal is held within the three-state window for
longer than the three-state hold-off time, tD_HOLD-OFF.
150°C
Activation
Temperature
TJ_driver IC
Thermal
Warning
Normal
Operation
HIGH
LOW
135°C Reset
Temperature
THWN#
Logic
State
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 13
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Adaptive Gate Drive Circuit
The driver IC advanced design ensures minimum
MOSFET dead-time, while eliminating potential shoot-
through (cross-conduction) currents. It senses the state
of the MOSFETs and adjusts the gate drive adaptively
to ensure they do not conduct simultaneously. Figure 27
provides the relevant timing waveforms. To prevent
overlap during the LOW-to-HIGH switching transition
(Q2 off to Q1 on), the adaptive circuitry monitors the
voltage at the GL pin. When the PWM signal goes
HIGH, Q2 begins to turn off after a propagation delay
(tPD_PHGLL). Once the GL pin is discharged below 1.0 V,
Q1 begins to turn on after adaptive delay tD_DEADON.
To preclude overlap during the HIGH-to-LOW transition
(Q1 off to Q2 on), the adaptive circuitry monitors the
voltage at the GH-to-PHASE pin pair. When the PWM
signal goes LOW, Q1 begins to turn off after a
propagation delay (tPD_PLGHL). Once the voltage across
GH-to-PHASE falls below 2.2 V, Q2 begins to turn on
after adaptive delay tD_DEADOFF.
Figure 27. PWM and 3-StateTiming Diagram
t
PD_TSGHH
VSWH
GH
to
V
SWH
GL
t
PD_PHGLL
t
D_HOLD-OFF
90%
Exit
3
-
state
1.0V
PWM
V
IL_PWM
V
IH_PWM
V
TRI_HI
V
IH_PWM
V
IH_PWM
1
0%
t
R_GL
t
D_HOLD-OFF
Exit
3
-
state
V
IH_PWM
V
TRI_HI
V
TRI_LO
V
IL_PWM
t
PD_PLGHL
t
PD_TSGHH
DCM
t
F_GH
t
R_GH
t
D_HOLD-OFF
1
0%
CCM
DCM
Exit
3
-
state
9
0%
1
0%
9
0%
Enter
3
-
state
Enter
3
-
state
t
D_DEADOFF
t
D_DEADON
Enter
3
-
state
t
F_GL
V
IN
V
OUT
2.2V
t
PD_TSGLH
Notes:
tPD_xxx = propagation delay from external signal (PWM, SMOD#, etc.) to IC generated signal. Example (tPD_PHGLL PWM going HIGH to LS VGS (GL) going LOW)
tD_xxx = delay from IC generated signal to IC generated signal. Example (tD_DEADON LS VGS (GL) LOW to HS VGS (GH) HIGH)
PWM Exiting 3-state
tPD_PHGLL = PWM rise to LS VGS fall, VIH_PWM to 90% LS VGS tPD_TSGHH = PWM 3-state to HIGH to HS VGS rise, VIH_PWM to 10% HS VGS
tPD_PLGHL = PWM fall to HS VGS fall, VIL_PWM to 90% HS VGS tPD_TSGLH = PWM 3-state to LOW to LS VGS rise, VIL_PWM to 10% LS VGS
tPD_PHGHH = PWM rise to HS VGS rise, VIH_PWM to 10% HS VGS (SMOD# held LOW)
SMOD# Dead Times
tPD_SLGLL = SMOD# fall to LS VGS fall, VIL_SMOD to 90% LS VGS tD_DEADON = LS VGS fall to HS VGS rise, LS-comp trip value (~1.0V GL) to 10% HS VGS
tPD_SHGLH = SMOD# rise to LS VGS rise, VIH_SMOD to 10% LS VGS tD_DEADOFF = VSWH fall to LS VGS rise, SW-comp trip value (~2.2V VSWH) to 10% LS VGS
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 14
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Skip Mode (SMOD#)
The Skip Mode function allows for higher converter
efficiency when operated in light-load conditions. When
SMOD# is pulled LOW, the low-side MOSFET gate
signal is disabled (held LOW), preventing discharge of
the output capacitors as the filter inductor current
attempts reverse current flow known as “Diode
Emulation” Mode.
When the SMOD# pin is pulled HIGH, the synchronous
buck converter works in Synchronous Mode. This mode
allows for gating on the Low Side MOSFET. When the
SMOD# pin is pulled LOW, the low-side MOSFET is
gated off. If the SMOD# pin is connected to the PWM
controller, the controller can actively enable or disable
SMOD# when the controller detects light-load condition
from output current sensing. Normally this pin is active
LOW. See Figure 28 for timing delays.
Table 2. SMOD# Logic
DISB#
PWM
SMOD#
GH
GL
0
X
X
0
0
1
3-State
X
0
0
1
0
0
0
0
1
1
0
1
0
1
0
1
0
1
1
1
1
1
0
Note:
4. The SMOD# feature is intended to have a short propagation delay between the SMOD# signal and the low-side
FET VGS response time to control diode emulation on a cycle-by-cycle basis.
Figure 28. SMOD# Timing Diagram
t
D_DEADON
PWM
VSWH
GH
to
VSWH
GL
t
PD_PHGLL
t
PD_PLGHL
t
D_DEADOFF
V
IH_PWM
V
IL_PWM
90%
1
0%
90%
1.0V
2.2V
t
PD_PHGHH
t
PD_SHGLH
Delay from SMOD# going
HIGH to LS V
GS
HIGH
HS turn
-
on with SMOD#
LOW
SMOD#
t
PD_SLGLL
Delay from SMOD# going
LOW to LS V
GS
LOW
DCM
CCM
CCM
1
0%
V
IH_PWM
1
0%
V
OUT
V
IH_SMOD
V
IL_SMOD
1
0%
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 15
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Application Information
Supply Capacitor Selection
For the supply inputs (VCIN), a local ceramic bypass
capacitor is recommended to reduce noise and to
supply the peak current. Use at least a 1 µF X7R or X5R
capacitor. Keep this capacitor close to the VCIN pin and
connect it to the GND plane with vias.
Bootstrap Circuit
The bootstrap circuit uses a charge storage capacitor
(CBOOT), as shown in Figure 30. A bootstrap capacitance
of 100 nF X7R or X5R capacitor is usually adequate. A
series bootstrap resistor may be needed for specific
applications to improve switching noise immunity. The
boot resistor may be required when operating above
15 VIN and is effective at controlling the high-side
MOSFET turn-on slew rate and VSHW overshoot. RBOOT
values from 0.5 to 3.0 Ω are typically effective in
reducing VSWH overshoot.
VCIN Filter
The VDRV pin provides power to the gate drive of the
high-side and low-side power MOSFET. In most cases,
it can be connected directly to VCIN, the pin that
provides power to the logic section of the driver. For
additional noise immunity, an RC filter can be inserted
between the VDRV and VCIN pins. Recommended
values would be 10 Ω and 1 µF.
Power Loss and Efficiency
Measurement and Calculation
Refer to Figure 30 for power loss testing method.
Power loss calculations are:
PIN=(VIN x IIN) + (V5V x I5V) (W)
(1)
PSW=VSW x IOUT (W)
(2)
POUT=VOUT x IOUT (W)
(3)
PLOSS_MODULE=PIN - PSW (W)
(4)
PLOSS_BOARD=PIN - POUT (W)
(5)
EFFMODULE=100 x PSW/PIN (%)
(6)
EFFBOARD=100 x POUT/PIN (%)
(7)
Figure 29. Block Diagram With VCIN Filter
Figure 30. Power Loss Measurement
VDRV
VCIN
VIN
PWM
V
5V
DISB#
PWM
Input
OFF
ON
C
VDRV
C
VIN
C
BOOT
R
BOOT
L
OUT
C
OUT
A
I
5V
A
I
IN
V
IN
V
V
SW
A
I
OUT
THWN#
BOOT
VSWH
CGND
PGND
DISB#
FDM
F
5
Open
-
Drain
Output
PHASE
SMOD#
FDMF6840C
VDRV
VCIN
VIN
PWM
V
5V
DISB#
PWM
Input
OFF
ON
C
VDRV
C
VIN
C
BOOT
R
BOOT
L
OUT
C
OUT
A
I
5V
A
I
IN
V
IN
V
V
SW
A
I
OUT
THWN#
BOOT
VSWH
CGND
PGND
DISB#
FDM
F
67
0
5
Open
-
Drain
Output
PHASE
SMOD#
C
V
CIN
R
V
CIN
FDMF6840C
VOUT
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 16
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
PCB Layout Guidelines
Figure 31 and Figure 32 provide an example of a proper
layout for the FDMF6840C and critical components. All
of the high-current paths, such as VIN, VSWH, VOUT,
and GND copper, should be short and wide for low
inductance and resistance. This aids in achieving a
more stable and evenly distributed current flow, along
with enhanced heat radiation and system performance.
Recommendations for PCB Designers
1. Input ceramic bypass capacitors must be placed
close to the VIN and PGND pins. This helps reduce
the high-current power loop inductance and the input
current ripple induced by the power MOSFET
switching operation.
2. The VSWH copper trace serves two purposes. In
addition to being the high-frequency current path
from the DrMOS package to the output inductor, it
serves as a heat sink for the low-side MOSFET in
the DrMOS package. The trace should be short and
wide enough to present a low-impedance path for
the high-frequency, high-current flow between the
DrMOS and inductor. The short and wide trace
minimizes electrical losses as well as the DrMOS
temperature rise. Note that the VSWH node is a high-
voltage and high-frequency switching node with high
noise potential. Care should be taken to minimize
coupling to adjacent traces. Since this copper trace
acts as a heat sink for the lower MOSFET, balance
using the largest area possible to improve DrMOS
cooling while maintaining acceptable noise emission.
3. An output inductor should be located close to the
FDMF6840C to minimize the power loss due to the
VSWH copper trace. Care should also be taken so the
inductor dissipation does not heat the DrMOS.
4. PowerTrench® MOSFETs are used in the output
stage and are effective at minimizing ringing due to
fast switching. In most cases, no VSWH snubber is
required. If a snubber is used, it should be placed
close to the VSWH and PGND pins. The selected
resistor and capacitor need to be the proper size for
power dissipation.
5. VCIN, VDRV, and BOOT capacitors should be
placed as close as possible to the VCIN-to-CGND,
VDRV-to-CGND, and BOOT-to-PHASE pin pairs to
ensure clean and stable power. Routing width and
length should be considered as well.
6. Include a trace from the PHASE pin to the VSWH pin
to improve noise margin. Keep this trace as short as
possible.
7. The layout should include the option to insert a
small-value series boot resistor between the boot
capacitor and BOOT pin. The boot-loop size,
including RBOOT and CBOOT, should be as small as
possible. The boot resistor may be required when
operating above 15 VIN and is effective at controlling
the high-side MOSFET turn-on slew rate and VSHW
overshoot. RBOOT can improve noise operating
margin in synchronous buck designs that may have
noise issues due to ground bounce or high positive
and negative VSWH ringing. Inserting a boot
resistance lowers the DrMOS efficiency. Efficiency
versus noise trade-offs must be considered. RBOOT
values from 0.5 to 3.0 are typically effective in
reducing VSWH overshoot.
8. The VIN and PGND pins handle large current
transients with frequency components greater than
100 MHz. If possible, these pins should be
connected directly to the VIN and board GND
planes. The use of thermal relief traces in series with
these pins is discouraged since this adds inductance
to the power path. This added inductance in series
with either the VIN or PGND pin degrades system
noise immunity by increasing positive and negative
VSWH ringing.
9. GND pad and PGND pins should be connected to
the GND copper plane with multiple vias for stable
grounding. Poor grounding can create a noise
transient offset voltage level between CGND and
PGND. This could lead to faulty operation of the gate
driver and MOSFETs.
10. Ringing at the BOOT pin is most effectively
controlled by close placement of the boot capacitor.
Do not add an additional BOOT to the PGND
capacitor. This may lead to excess current flow
through the BOOT diode.
11. The SMOD# and DISB# pins have weak internal
pull-up and pull-down current sources, respectively.
These pins should not have any noise filter
capacitors. Do not to float these pins unless
absolutely necessary.
12. Use multiple vias on the VIN and VOUT copper
areas to interconnect top, inner, and bottom layers
to distribute current flow and heat conduction. Do
not put many vias on the VSWH copper to avoid
extra parasitic inductance and noise on the
switching waveform. As long as efficiency and
thermal performance are acceptable, place only
one VSWH copper on the top layer and use no vias
on the VSWH copper to minimize switch node
parasitic noise. Vias should be relatively large and
of reasonably low inductance. Critical high-
frequency components, such as RBOOT, CBOOT, RC
snubber, and bypass capacitors; should be located
as close to the respective DrMOS module pins as
possible on the top layer of the PCB. If this is not
feasible, they can be connected from the backside
through a network of low-inductance vias.
© 2015 Fairchild Semiconductor Corporation www.fairchildsemi.com
FDMF6840C • Rev. 1.0 17
FDMF6840C Extra-Small, High-Performance, High-Frequency DrMOS Module
Figure 31. PCB Layout Example (Top View)
Figure 32. PCB Layout Example (Bottom View)
LAND PATTERN
RECOMMENDATION
NOTES: UNLESS OTHERWISE SPECIFIED
A) DOES NOT FULLY CONFORM TO JED EC
REGISTRATION MO-220, DATED
MAY/2005.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS DO NOT INCLUDE BURRS
OR MOLD FLASH. MOLD FLASH OR
BURRS DOES NOT EXCEED 0.10MM.
D) DIMENSIONING AND TOLERANCING PER
ASME Y14.5M-1994.
E) DRAWING FILE NAME: PQFN40AREV3
SEE
DETAIL 'A'
SCALE: 2:1
SEATING
PLANE
0.65
0.40
2.10
0.50 TYP
4.50
5.80
2.50
0.25 1.60
0.60
0.15
2.10
0.35
1
C
0.30
0.20 0.05
0.00
1.10
0.90
0.10 C
0.08 C
10
11
20
2130
31
40
0.40
0.50 (0.70)
0.40
2.00±0.10 2.00±0.10
(0.20) (0.20)
1.50±0.10 0.50
0.30 (40X)
0.20
6.00
6.00
0.10 C
2X
B
A
0.10 C
2X
0.30
0.20(40X)
4.40±0.10 0.10 C A B
0.05 C
(2.20)
0.50
10 140
31
30
21
20
11
PIN#1
INDICATOR
PIN #1 INDICATOR
MAY APPEAR AS
OPTIONAL
2.40±0.10
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81358171050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC