SD5000C..R SERIES
STANDARD RECOVERY DIODES Hockey Puk Version
5570A
Bulletin I2034/A
Features
Wide current range
High voltage ratings up to 3000V
High surge current capabilities
Diffused junction
Hockey Puk version
Case style B-44 (R-PUK)
Typical Applications
Converters
Power supplies
High power drives
Auxiliary system supplies for traction applications
Major Ratings and Characteristics
IF(AV) 5570 A
@ Ths 55 °C
IF(RMS) 9400 A
@ Ths 25 °C
IFSM @ 50Hz 67800 A
@ 60Hz 71000 A
I2t@ 50Hz 23000 KA2s
@ 60Hz 21000 KA2s
VRRM range 2000 to 3000 V
TJ- 40 to 160 °C
Parameters SD5000C..R Units
case style B-44 (R-PUK)
Next Data SheetIndex
Previous Datasheet
To Order
SD5000C..R Series
Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max.
Type number Code peak reverse voltage repetitive peak rev. voltage @ TJ = 160°C
V V mA
20 2000 2100
24 2400 2500
26 2600 2700
30 3000 3100
ELECTRICAL SPECIFICATIONS
Voltage Ratings
IF(AV) Max. average forward current 5570 (2850) A180° conduction, half sine wave
@ Heatsink temperature 55 (85) °C Double side (single side) cooled
IF(RMS) Max. RMS forward current 9400 A@ 25°C heatsink temperature double side cooled
IFSM Max. peak, one-cycle forward, 67800 t = 10ms No voltage
non-repetitive surge current 71000 t = 8.3ms reapplied
57000 t = 10ms100% VRRM
59700 t = 8.3ms reapplied Sinusoidal halfwave,
I2tMaximum I2t for fusing 23000 t = 10ms No voltage Initial TJ = TJ max.
21000 t = 8.3ms reapplied
16260 t = 10ms 100% VRRM
14845 t = 8.3ms reapplied
I2√tMaximum I2√t for fusing 230000 KA2√st = 0.1 to 10ms, no voltage reapplied
VF(TO)1 Low level value of threshold
voltage
VF(TO)2 High level value of threshold
voltage
rf1Low level value of forward
slope resistance
rf2High level value of forward
slope resistance
VFM Max. forward voltage drop 1.32 VIpk= 8000A, TJ = TJ max, tp = 10ms sinusoidal wave
A
KA2s
0.774 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
Parameter SD5000C..R Units Conditions
Forward Conduction
V
mΩ
0.068 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
1.271 (I > π x IF(AV)),TJ = TJ max.
0.037 (I > π x IF(AV)),TJ = TJ max.
SD5000C..R 100
Next Data SheetIndex
Previous Datasheet
To Order
SD5000C..R Series
Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics
Fig. 5 - Forward Power Loss Characteristics Fig. 6 - Forward Power Loss Characteristics
Fig. 7 - Maximum Non-Repetitive Surge Current Fig. 8 - Maximum Non-Repetitive Surge Current
To Order
Next Data SheetIndex
Previous Datasheet
SD5000C..R Series
∆RthJ-hs Conduction
(The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC)
Ordering Information Table
1-Diode
2-Essential part number
3-0 = Standard recovery
4-C = Ceramic Puk
5-Voltage code: code x 100 = VRRM (see Voltage Ratings Table)
6-R = Puk Case B-44 (R-PUK)
1 2 34 5 6
Device Code SD 500 0 C30 R
Sinusoidal conduction Rectangular conduction
Conduction angle Units Conditions
Single Side Double Side Single Side Double Side
180° 0.0009 0.0010 0.0006 0.0006
120° 0.0010 0.0011 0.0010 0.0010
90° 0.0013 0.0013 0.0014 0.0014 K/W TJ = TJ max.
60° 0.0019 0.0019 0.0020 0.0020
30° 0.0033 0.0033 0.0034 0.0034
TJMax. junction operating temperature range -40 to 160
Tstg Max. storage temperature range -55 to 200
RthJ-hs Max. thermal resistance, junction 0.02 DC operation single side cooled
to heatsink 0.01 DC operation double side cooled
FMounting force, ± 10% 39200 N
(4000) (Kg)
wt Approximate weight 1590 g
Case style B-44 (R-PUK) See Outline Table
Parameter SD5000C..R Units Conditions
Thermal and Mechanical Specifications
K/W
°C
To Order
Next Data SheetIndex
Previous Datasheet
SD5000C..R Series
Fig. 1 - Current Ratings Characteristics
Outline Table
Fig. 2 - Current Ratings Characteristics
3.5 (0.14) DIA. NOM. x
2.5 (0.10) DEEP MIN. BOTH ENDS
111 (4.37) DIA. MAX.
TWO PLACES
73.2 (2.88) DIA. MAX.
100.5 (3.96) DIA. MAX.
37.2 (1.46)
36.2 (1.43)
0.8 (0.03) MIN.
BOTH ENDS
Case Style B-44 (R-PUK)
All dimensions in millimeters (inches)
To Order
Next Data SheetIndex
Previous Datasheet
