MODELS LOW NOISE 5V AMPLIFIER AM-/AMC-210 5-500 MHz GAIN: 15 dB Low DC Power Requirements +5V @12 mA Typical 1.8 dB Typical Midband Noise Figure + 6.5 dBm Typical Midband Output Power Guaranteed Specifications* (From 55C to + 85C Case Temp) Frequency Range 5-500 MHz Gain (+ 25C) @250 MHz 15.25 +0.5 dB Frequency Response +1.0 dB Max Gain Variation +1.0 dB Max with Temperature Output Power 5-250 MHz +3 dBm Min (1 dB Compression) 5-500 MHz 0 dBm Min Noise Figure 5-250 MHz 2.8 dB Max 5-500 MHz 3.5 dB Max Reverse Transmission ~17 dB Max - 19 dB Typ VSWR 2.5:1 Max Intermodulation Intercept Point (for two-tone output power up to 5 dBm) Second Order +18 dBm Min Third Order +12 dBm Mir Bias Power +5VDC @15mA Max (12 mA, 60 mW Typ) Operating Characteristics Impedance 50 Ohms Nominai Maximum Rating RF Input +10 dBm Max Package Type Pin (TO-8-1) Connectorized (C-6) (See pages 472 and 481 for physical dimensions.) Environmental These units are designed to meet the environmental and screening requirements of Table 1B, page 497 of the Adams-Russell catalog. All specicat-ons apply when operated at +5 VDC, with 50 ohm source and load impedance. This product contains elements protected by United States Patent Number 3,624,536. S-Parameters: For typical S-Parameter data. see page 99 Ordering Information Unit Price Model No. Part No. Connectors (5-9 Units) AM-210 8999 Pin $ 89 AMC-210 8994 SMA 186 Deuvery is from stock Typical Performance 3 5 10 2 30 50 100 200 400 S00 800 NOISE FIGURE INTERCEPT (dBm) OUTPUT POWER (dBm) 3.5 6 20 3 680 6100 2000 400-500 600 . INTERMODULATION INTERCEPT + $s 8 8 a o Ss mo 50 $0 200 9400. 500 600 1 dB COMPRESSION ~ # 3 8 a] 20 30) 50 200 400 500 600 FREQUENCY MHz ANZAC Make the Connection. . . 80 Cambridge Street, Burlington, MA 01803 Fax (617) 273-1921 For Technical Information, Call (617) 273-3333 78 @ Adams E.Russell COMPONENTS GROUP For Ordering Information, Call (617) 273-3333