Data Sheet ACDC-400 Digital AC/DC Clamp-on Multimeter The Amprobe ACDC-400 clamp meter is full featured with wide measurement capabilities. It measures both AC and DC Current to 400 amps, AC and DC Voltage to 600V, plus Resistance and Continuity. The ACDC-400 also offers software features of Min/Max and Relative measurements with a large digital and analog combined display and backlight. AC/DC Current up to 400A AC/DC Voltage up to 600V Resistance measurement Continuity test Data Hold MAX/MIN recording No hassle warranty Relative measurement No waiting. Analog bargraph No shipping charges. Auto or Manual range selection Our commitment to high-quality products and customer service is demonstrated by our industry exclusive "No Hassle" warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot. Backlight Max Conductor 29.97 mm (1.18") Includes carrying case CAT III 600V (note: $500 MSLP limit) Amprobe(R) Test Tools www.Amprobe.com Data Sheet ACDC-400 Digital AC/DC Clamp-on Multimeter Specifications General Specifications Display Update Rate Polarity Power Supply Battery Life APO Timing Low battery Environment Temperature / Humidity Jaw opening Dimension Weight Safety LVD EMC 3-3/4 digits 4000 counts LCD display 2 per second nominal Automatic 2 standard 1.5V AAA Size (NEDA 24G or IEC R03) battery typical 25 hours idle for 30 minutes on LCD; approx. 2.4V Indoor operation, below 2000 m Operating: 5C to 40C (41F to 104F), < 80% RH; Storage: -10C to 60C (14F to 122F), < 80% RH 27mm (1.1 in) max 202 x 70 x 40mm (7.9 x 2.7 x 1.6 in.) 254 gm (0.6 lb) Meets EN60101-1:2001; EN61010-2-032(2002), Category II- 600 Volts ac & dc; pollution degree : 2; class 2 EN61326-1:2006 Electrical Specifications (23 C 5 C) < 75%RH DC Voltage Range Accuracy 400.0 mV 4.000V, 40.00V, 400.0V (0.8% rdg + 2 dgts) 600V (1.0% rdg + 2 dgts) Input impedance 10M, 30pf nominal ( 100 M for 400.0mV range) Max input 600 VDC AC Voltage (sinusoidal) Input impedance Max input DC Current (Clamp-On) Range Frequency 400.0mV 40Hz to 60Hz 4.000V, 40.00V, 400.0V 50Hz to 500Hz 600V 50Hz to 500Hz 10M, 30pf nominal ( 100 M for 400.0mV range) 600 VAC rms Max current Range Accuracy 0.00A to 40.00A (2.0% rdg + 10 dgts) 40.0A to 400.0A (2.0% rdg + 10 dgts) 400A rms continuous; 600 A rms ( 60 seconds) ACA Current (Clamp-On) (sinusoidal) Max current Range Frequency 0.00A to 40.00A 50Hz to 60Hz 40.0A to 400.0A 50Hz to 60Hz 400A rms continuous; 600 A rms ( 60 seconds) Resistance Open Circuit Voltage Continuity Tester Accuracy (1.0% rdg + 50 dgts) (1.0% rdg + 3 dgts) (1.2% rdg + 3 dgts) Accuracy (2.0% rdg + 10 dgts) (2.0% rdg + 10 dgts) Range Accuracy 400.0 (1.0% rdg + 5 dgts) 4.000k, 40.00k, 400.0k, 4.000M (1.0% rdg + 3 dgts) 40.00M (3.0% rdg + 3 dgts) 0.45 Vdc typical; 1.5 Vdc typical for 400.0 Open Circuit Voltage: 1.4Vdc typical Audible threshold: < 40 Amprobe(R) Test Tools website: www.Amprobe.com email: info@amprobe.com Everett, WA 98203 Tel: 877-AMPROBE Amprobe(R) Test Tools Amprobe(R) Test Tools Europe Amprobe Test Tools Europe Beha-Amprobe GmbH In den Engematten 14 79286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0 (c)2008 Amprobe Test Tools. All rights reserved. 10/2008 3320124 Rev A www.Amprobe.com