WS10-SPIBUS TD - Teledyne LeCroy

WaveSurfer 10

Oscilloscopes

1 GHz, 10 GS/s

The WaveSurfer 10 combines the MAUI advanced user interface

with powerful waveform processing, in addition to advanced math,

measurement and debug tools, to quickly analyze and nd the root

cause of problems. With a 10.4” touch screen display, high performance

hardware, and compact form factor the WaveSurfer 10 is unique among

1 GHz oscilloscopes.

MAUI - A New Wave of Thinking

MAUI is the most advanced

oscilloscope user interface. MAUI

is designed for touch; all important

oscilloscope controls are accessed

through the intuitive touch screen.

MAUI is built for simplicity; time

saving shortcuts and intuitive dialogs

simplify setup. MAUI is made to solve;

deep set of debug and analysis

tools help identify problems and nd

solutions quickly.

Uncompromised Performance

Many 1 GHz oscilloscopes are avail-

able at attractive entry-point prices,

however, they are often limited in

sample rate, memory or features. The

WaveSurfer 10 provides uncompro-

mised 1 GHz performance with up

to 10 GS/s per channel and 32 Mpts

of memory.

Advanced Debug Toolkit

With the addition of the Advanced

Debug Toolkit, the WaveSurfer 10

becomes an unparalleled debug and

analysis machine adding 10 GS/s

sample rate on 4 channels, 32 Mpts

of memory, sequence mode, history

mode, 13 additional math functions,

and 2 simultaneous math traces.

Capture Debug, Analyze,

Document

Easily accessible measurement, math

and debug tools, plus a wide variety of

serial data protocol decoders, and ac-

tive probes ensure the WaveSurfer 10

can capture and analyze any type of

waveform and simplify the debug pro-

cess. The LabNotebook tool provides

a fast way to save waveforms, save

setups and screen images, report

results, and view offline.

Key Features

• 1 GHz, 10 GS/s, up to 16 Mpts/ch

• MAUI - Advanced User Interface

– Designed for Touch

– Built for Simplicity

– Made to Solve

• WaveScan - Advanced Search

and Find

• LabNotebook Documentation and

Report Generation

• 10.4” Touch Screen Display

• Spectrum Analyzer Mode

• Power Analysis Software

• Serial Trigger and Decode

– I2C, SPI, UART

– CAN, LIN, FlexRay, SENT

– Ethernet 10/100BaseT,

USB 1.0/1.1/2.0, USB2.0-HSIC

– Audio (I2S, LJ, RJ, TDM)

– MIL-STD-1553, ARINC 429

– MIPI D-PHY, DigRF 3G, DigRF v4

– Manchester, NRZ

• Advanced Debug Toolkit adds:

– 10 GS/s on all 4 channels

– 16 Mpts/ch memory (32 Intlv’d)

– Sequence Mode Segmented

Memory

– History Mode Waveform

Playback

– 13 Additional Math Operators

– 2 Math Functions

MAUI – A NEW WAVE OF THINKING

MAUI is the most advanced oscilloscope user interface

developed to put all the power and capabilities of the modern

oscilloscope right at your ngertips. Designed for touch;

all important oscilloscope controls are accessed through the

intuitive touch screen. Built for simplicity; time saving

shortcuts and intuitive dialogs simplify setup. Made to solve;

a deep set of debug and analysis tools helps identify problems

and nd solutions quickly.

Oscilloscopes are constantly evolving to meet the rapidly changing test and measurement needs of today’s cutting edge

designs. Additional complexity and capabilities are introduced with each new feature, and in some cases when capabilities

of other instruments like a protocol analyzer, function generator or logic analyzer are added. With all this added capability

the oscilloscope becomes complex and cumbersome to use. The traditional user interface consisting of knobs, buttons,

soft keys and nested menus is unmanageable and more buttons are typically added to access the new functionality.

MAUI solves the complexity problem. MAUI eliminates the overwhelming number of buttons and knobs providing an

intuitive user interface that is designed for touch, built for simplicity and made to solve without sacricing any features or

cutting edge test capabilities.

MAUI is designed for touch. All

important controls for vertical,

horizontal and trigger are always

one touch away. Touch the

waveform to position and drag a

box around it to zoom in for more

details. Position cursors, congure

measurements and interact with

tables all through simple

touch operation.

Designed for Touch

Made to Solve

MAUI is built for simplicity. Basic

waveform viewing and measure-

ment tools as well as advanced

math and analysis capabilities are

seamlessly integrated in a single

user interface. Time saving short-

cuts and intuitive dialogs simplify

setup and shorten debug time.

MAUI is made to solve. Measure all

aspects of a waveform to identify

problems. Debug with a large set of

time saving tools to nd the cause

of problems. Solve problems fast

with powerful analysis tools.

Built for Simplicity

Access shortcuts to analysis tools

by touching the waveform.

Congure parameters by touching

measurement results.

Channel, timebase and trigger

descriptors provide easy access to

controls without navigating menus.

DShortcuts to commonly used functions

are displayed at the bottom of the

channel, math and memory menus.

Embedded Controller Design

and Debug

Save time when working with embedded

controllers by adding high-performance

mixed signal capability with the

WaveSurfer 10. Capture digital signals

up to 250 MHz with up to 10 Mpts/Ch

memory, 1 GS/s and 18 channels.

Quickly and easily isolate specic

serial data events with I2C, SPI, UART,

RS-232, USB 1.0/1.1/2.0, USB2-HSIC,

10/100Base T ENET, Audio (I2S, LJ, RJ,

TDM), MIL-STD-1553, ARINC 429,

MIPI D-PHY, DigRF, CAN, CAN FD, LIN,

FlexRay, SENT, Manchester, and NRZ

trigger and decode options.

Advanced Math and Measure

Use automatic measurement param-

eters with statistics and histicons as

well as math functions to understand

every waveform detail.

WaveStream Fast Viewing Mode

WaveStream provides a vibrant,

intensity graded (256 levels) display

with a fast update to closely

simulate the look and feel of an

analog oscilloscope.

ADVANCED TOOLS FOR WAVEFORM ANALYSIS

Pass/Fail Mask Testing

Built-in masking testing quickly

identies problems and marks the

location. A history of the pass/fail

results can be displayed on the screen.

LabNotebook Documentation

and Report Generation Tool

Save all results and data with a

single button press and create

custom reports with LabNotebook.

WaveScan Advanced Search

and Find Tool

Quickly search waveforms for

runts, glitches or other anomalies

with WaveScan.

Enhanced Resolution

The enhanced resolution (ERES)

feature improves vertical resolu-

tion of the oscilloscope resulting

in cleaner traces and the ability to

see more signal details. Up to

3 bits of ERES can be applied.

LabNotebook Documentation Tool

LabNotebook is a one-button tool to save and restore waveforms, measurements

and settings without navigating multiple menus. Custom reports can be created and

easily shared; saved waveforms can be measured and analyzed later both on the

oscilloscope or offline using the WaveStudio PC Utility.

WaveStudio Oine Analysis Tool

WaveStudio is a fast and easy way to analyze acquired waveforms offline. Offline

tools include x and y axis cursors for quick measurements and 21 built-in automatic

measurements for more precise and accurate results. WaveStudio can also connect

to the oscilloscope for direct data transfer to the PC. Data saved with LabNotebook

can be shared with others using WaveStudio for easy collaboration.

Advanced Probe Interface

The advanced active probe

interface gives tremendous

exibility for measuring high

voltages, high frequencies,

currents, or differential signals.

High Impedance Active Probes

High Bandwidth

Differential Probes

High Voltage Differential Probes

High Voltage Passive Probes

Current Probes

Waveform

V/div

T/div

Memory Length

Sample Rate

Measurement

Math

Screen Capture

Waveform

V/div

T/div

Memory Length

Sample Rate

Measurement

Math

Screen Capture

Waveform

V/div

T/div

Memory Length

Sample Rate

Measurement

Math

Screen Capture

REPORT

ADVANCED DEBUG TOOLKIT

The WaveSurfer 10M includes the

Advanced Debug Toolkit software

which makes it an unparalleled

debug and analysis machine. The

high sample rate of 10 GS/s on all 4

channels, 32 Mpts of memory,

sequence mode segmented

memory, history mode waveform

playback, 13 additional math

functions, and 2 simultaneous

math traces, all included in this

powerful debug package, enable

the WaveSurfer 10M to perform

advanced analysis on long captures

with 10x oversampling to nd the

root cause of problems.

With 10 GS/s and 16 Mpts per channel every detail of

a signal will be captured and displayed. In 4 channel

operation 1.6ms of data can be captured at full sample

rate, in 2 channel mode, 3.2ms, to ensure no detail or

anomaly is missed.

13 additional math operators are added to the already

wide variety of math functions to allow deeper

analysis. Included additional functions are absolute

value, average (summed or continuous), envelope,

enhanced resolution, exp (base e), exp (base 10),

floor, invert, log (base e), log (base 10), reciprocal,

roof, and trend.

Congure and view 2 simultaneous math traces, each

math trace can perform dual math operation enabling

complex analysis and faster troubleshooting.

Histicons display the statistical distribution of each

measurement parameter. Anomalies in measurement

data can quickly be seen and then analyzed to nd

the root cause of problems faster. Histicons are auto-

scaled so outliers can never be missed.

Advanced Waveform Capture

with Sequence Mode

Use Sequence mode to store up to

5,000 triggered events as “segments”

into memory. This can be ideal when

capturing many fast pulses in quick

succession or when capturing events

separated by long time periods.

Sequence mode provides timestamps

for each acquisition and minimizes

dead-time between triggers to less than

1 μ s. Combine Sequence mode with

advanced triggers to isolate rare events

over time and analyze afterwards.

History Mode Waveform Playback

Scroll back in time using History Mode to view previous waveforms and isolate anomalies. Use cursors and measurement

parameters to quickly nd the source of problems. History mode is always available with a single button press, no need to

enable this mode and never miss a waveform.

Go Back in Time to Identify the Source of a Problem

High-performance Mixed

Signal Capabilities

Embedded controller design and debug

involves capturing and viewing a

number of different types of signals.

These signals are typically a mix of

analog, digital, and serial data wave-

forms from a combination of analog

sensors, microcontrollers and peripheral

devices. With the ability to capture digital

signals with speeds up to 250 MHz

and long memory of 10 Mpts/Ch the

WaveSurfer 10 provides unmatched

mixed signal performance. The

WaveSurfer 10 is the ideal tool for test-

ing embedded systems with 8-bit micro-

controllers or slower digital signals.

With 18 digital inputs each with

250 MHz maximum input frequency

and 10 Mpts/Ch memory, the

WaveSurfer 10 is an outstanding value

and provides a complete set of tools for

embedded system testing.

Extensive Triggering

The WaveSurfer 10 has extensive digital

trigger capabilities. Normal oscilloscope

triggers will operate on digital inputs.

Cross-pattern triggering allows for

simple or complex trigger patterns to be

setup with any combination of analog

and digital channels. Event triggering

can be congured to arm on an analog

signal and trigger on a digital pattern.

Quick Mixed Signal Setup,

Easy-to-use

Unlike a traditional Logic Analyzer, the

WaveSurfer 10 is easy to use. A simple

connection links the oscilloscope with

the digital inputs so users can start

viewing signals and begin debugging

quickly. In addition, all standard

oscilloscope tools are readily

accessible. Signal debug is simple,

using standard oscilloscope tools,

such as cursors, measurement

parameters, and zooming.

EMBEDDED CONTROLLER DESIGN AND DEBUG

Teledyne LeCroy’s versatile WaveSurfer 10 mixed signal oscilloscope combines the powerful

WaveSurfer 10 with the exibility of digital inputs using the MS-250. In addition, the many

triggering and decoding options turn the WaveSurfer 10 into an all-in-one analog, digital, and serial

data trigger, acquisition, and debug machine.

View decoded protocol information on top of physical layer waveforms and trigger on protocol

specic messages.

Powerful Serial Data Triggers

The serial data trigger will quickly

isolate events on a bus eliminating

the need to set manual triggers and

hoping to catch the right information.

Trigger conditions can be entered in

binary or hexadecimal formats and

conditional trigger capabilities even

allow triggering on a range of

different events.

Intuitive, Color-Coded

Decode Overlay

Protocol decoding is shown directly

on the waveform with an intuitive,

color-coded overlay and presented in

binary, hex or ASCII. Decoding on the

WaveSurfer 10 is fast even with long

memory and zooming in to the wave-

form shows precise byte by

byte decoding.

Table Summary and Search/Zoom

To further simplify the debug process

all decoded data can be displayed in a

table below the waveform grid.

Selecting an entry in the table with

the touch screen will display just

that event. Additionally, built-in

search functionality will nd specic

decoded values.

SERIAL TRIGGER AND DECODE OPTIONS

Supported Serial Data

Protocols

• I2C, SPI, UART

• CAN, CAN FD, LIN, FlexRay™, SENT

• Ethernet 10/100BaseT,

USB 1.0/1.1/2.0, USB 2.0-HSIC

• Audio (I2S, LJ, RJ, TDM)

• MIL-STD-1553, ARINC 429

• MIPI D-PHY, DigRF 3G, DigRF v4

• Manchester, NRZ

Debugging serial data busses can be confusing and time consuming. The serial data and

decode options for WaveSurfer 10 provide time saving tools for serial bus debug and validation.

Simple Frequency Domain Analysis

Get better insight to the frequency

content of any signal with use of

the Spectrum Analyzer mode on the

WaveSurfer 10. This mode provides a

spectrum analyzer style user interface

with controls for start/stop frequency

or center frequency and span. The

unique peak search automatically

labels spectral components and pres-

ents frequency and level in an interac-

tive table. Utilize up to 20 markers to

automatically identify harmonics and

monitor how the spectrum changes

over time using the spectrogram which

can display a 2D or 3D history of the

frequency content.

SPECTRUM AND POWER ANALYZER

Power Analyzer Automates

Switching Device Loss

Measurements

Quickly measure and analyze the

operating characteristics of power

conversion devices and circuits with

the Power Analyzer option. Critical

power switching device measurements,

control loop modulation analysis,

and line power harmonic testing are

all simplied with a dedicated user

interface and automatic measure-

ments. Areas of turn-on, turn-off, and

conduction loss are all identied with

color-coded waveform overlays for

faster analysis.

Power Analyzer provides quick and

easy setup of voltage and current in-

puts and makes measurements

as simple as the push of a

button. Tools are provided to help re-

duce sources of measurement errors

and the measurement parameters pro-

vide details of single cycle or average

device power losses.

Beyond the advanced power loss mea-

surement capabilities, the Power

Analyzer modulation analysis capa-

bilities provide insight to understand

control loop response to critical events

such as a power supply’s soft start per-

formance or step response to line and

load changes. The Line Power Analysis

tool allows simple and quick pre-compli-

ance testing to EN 61000-3-2.

WAVESURFER 10 SPECIFICATIONS

Analog - Vertical

Bandwidth (@ 50Ω) 1 GHz

Rise time 350 ps

Input Channels 4

Resolution 8 bits

Sensitivity 2 mV/div–10 V/div (1 MΩ);

2 mV/div–1 V/div (50 Ω)

DC Gain Accuracy ±1.0% of full scale (typical); ±1.5% of

full scale ≥ 10 mV/div (warranted)

BW Limit 20 MHz, 200 MHz

Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC +

Peak AC ≤10 kHz)

Input Coupling AC, DC, GND (DC and GND for 50 Ω)

Input Impedance 1 MΩ || 16 pF, or 50 Ω

Analog - Acquisition

Sample Rate (Single-shot) 5 GS/s (10 GS/s Interleaved)

Sample Rate (Repetitive) 50 GS/s

Record Length 10 Mpts/Ch (all channels),

20 Mpts (interleaved)

Capture Time Up to 2.0 ms at full sample rate on all

four channels

Acquisition Modes Real Time, Roll, RIS (Random

Interleaved Sampling), WaveStream

(Fast Viewing Mode).

Timebase Range 200 ps/div–1000 s/div

(Roll Mode available at ≥ 100 ms/div

and ≤ 5 MS/s)

Timebase Accuracy ≤ 5 ppm @ 25 °C (typical) (≤ 10 ppm @

5–40 °C)

Digital - Vertical and Acquisition (with MS-250 Mixed Signal Option)

Input Channels 18 (D0-D17)

Input Impedance 100 kΩ || 5.0 pF

Maximum Input Voltage ±30 V non-destruct

Threshold Groupings D0–D8, D9–D17

Threshold Selections TTL, ECL, CMOS, PECL, LVDS,

User Dened

Sample Rate 1 GS/s

Record Length 10 Mpts/Ch

Minimum Detectable Pulse

Width

2 ns

Maximum Input Frequency 250 MHz

Trigger System

Modes Normal, Auto, Single, and Stop

Sources

Any input channel, External, Ext/10,

or line; slope and level unique to each

source (except for line trigger)

Coupling DC, AC, HFRej, LFRej

Pre-trigger Delay 0-100% of full scale

Post-trigger Delay 0-10,000 Divisions

Hold-off 1 ns to 20 s or 1 to 1,000,000,000 events

Internal Trigger Level Range ±4.1 div from center

External Trigger Level Range EXT/10 ±4V; EXT ±400 mV

Trigger Types Edge, Glitch, Width, Logic (Pattern),

TV (NTSC, PAL, SECAM, HDTV–720p,

1080i, 1080p), Runt, Slew Rate,

Interval (signal or Pattern), Dropout,

Qualied (State or Edge)

Probes

Standard Probes One PP011 (5 mm)per channel

Probing System BNC and Teledyne LeCroy ProBus for

Active voltage, current and differential

probes

Display System

Display Size Color, 10.4” TFT-LCD Touch Screen

Display Resolution SVGA: 800 x 600 pixels

Measure, Zoom and Math Tools

Measurement Parameters Up to 6 of the following parameters

can be calculated at one time on any

waveform: Amplitude, Area, Base

(Low), Delay,Parameters Duty, Fall

Time (90%–10%), Fall Time (80%–

20%), Frequency, Maximum, Mean,

Minimum, Overshoot+, Overshoot-,

Period, Peak-Peak, Phase, Rise Time

(10%–90%), Rise Time (20%–80%),

RMS, Skew, Standard Deviation, Top

(High), Width+, Width-. Measurements

can be gated.

Zooming Use front panel QuickZoom button, or

use touch screen or mouse to draw a

box around the zoom area.

Math Functions Functions include Sum, Difference,

Product, Ratio, Derivative, Deskew,

Integral, Rescale (change scale and

units), Square, Square Root, Zoom and

FFT (up to 1 Mpts with power spec-

trum output and rectangular, VonHann,

and FlatTop windows). 1 math function

may be dened at a time, 2 functions

may be chained together.

WaveSurfer 10M and Advanced Debug

Toolkit Additional Capabilities (Optional)

Sample Rate (SIngle-shot) 10 GS/s on all 4 channels

Record Length 16 Mpts/ch (32 Interleaved)

Additional Acquisition Mode Sequence (Segmented Memory up to

5,000 segments with 1μs intersegment

time)

Additional Math Functions Absolute value, Average (summed

or continuous), Envelope, Enhanced

Resolution, Exp (base e), Exp (base

10), Floor, Invert, Log (base e), Log

(base 10), Reciprocal, Roof and Trend.

2 dual operator math functions may be

dened at a time.

Additional Measurement

Capabilities

Histicons for measurement

distribution analysis

Additional Debug Tools History mode waveform playback

Connectivity

Ethernet Port 10/100/1000Base-T Ethernet interface

(RJ-45 connector)

USB Host Ports (5) USB Ports

GPIB Port (Optional) Supports IEEE – 488.2 (Optional

External Adapter)

External Monitor Port Standard 15-pin D-Type SVGA-

compatible DB-15 connector

Remote Control Via Windows Automation, or via

Teledyne LeCroy Remote Command

Set

Network Communication

Standard

VXI-11 or VICP, LXI Class C Compliant

Physical

Dimensions (HWD) 260 mm x 340 mm x 152 mm

Excluding accessories and projections

(10.25” x 13.4” x 6”)

Net Weight 7.26 kg. (16.0 lbs.)

ORDERING INFORMATION

Product Description Product Code

WaveSurfer 10 Oscilloscopes

1 GHz, 5 GS/s, 4 Ch, 10 Mpts/Ch DSO with 10.4” Touch

Screen Display. 10 GS/s, 20 Mpts Interleaved

WaveSurfer 10

1 GHz, 10 GS/s, 4 Ch, 16 Mpts/Ch DSO with 10.4”

Touch Screen Display. 10 GS/s, 32 Mpts Interleaved

includes WS10-ADT option

WaveSurfer 10M

Included with Standard Congurations

÷10 Passive Probe (Total of 1 Per Channel),

Protective Front Cover, Getting

Started Guide, Commercial NIST Traceable Calibration with Certicate,

Power Cable for the Destination Country, 3-year Warranty

General Accessories

Soft Carrying Case WS10-SOFTCASE

Hard Carrying Case WS10-HARDCASE

Rack Mount Accessory WS10-RACK

Software Options

Advanced Debug Toolkit Option WS10-ADT

Power Analyzer Option WS10-PWR

Spectrum Analyzer Option WS10-SPECTRUM

Local Language Overlays

German Front Panel Overlay WS10-FP-GERMAN

French Front Panel Overlay WS10-FP-FRENCH

Italian Front Panel Overlay WS10-FP-ITALIAN

Spanish Front Panel Overlay WS10-FP-SPANISH

Japanese Front Panel Overlay WS10-FP-JAPANESE

Korean Front Panel Overlay WS10-FP-KOREAN

Chinese (Tr) Front Panel Overlay WS10-FP-CHNES-TR

Chinese (Simp) Front Panel Overlay WS10-FP-CHNES-SI

Russian Front Panel Overlay WS10-FP-RUSSIAN

Mixed Signal Solutions

500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch

Mixed Signal Oscilloscope Option

MS-500

250 MHz,36 Ch,1 GS/s, 25 Mpts/ch

(500 MHz,18 Ch,2 GS/s, 50 Mpts/ch Interleaved)

Mixed Signal Option

MS-500-36

250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch

Mixed Signal Oscilloscope Option

MS-250

Mixed Signal Accessories

Extra Large Gripper Probe Set, Includes 22 probes PK400-0

Large Gripper Probe Set for 0.10 Inch (2.54 mm)

Pin Pitch. Includes 10 Probes with Color-coded Leads

PK400-1

Medium Gripper Probe Set for 0.04 Inch (1.0 mm)

Pin Pitch. Includes 10 Probes with Color-coded Leads

PK400-2

Small Gripper Probe Set for 0.008 Inch (0.2 mm)

Pin Pitch. Includes 10 Probes with Color-coded Leads

PK400-3

18-pin 3M Interface Cable MSO-3M

(Mates with 3M Part Number 2520-6002)

MSO-3M

36 Channel Mictor Connector

(Includes 1 MSO-MICTOR-SHROUD)

MSO-Mictor

Product Description Product Code

Serial Data Options

ARINC 429 Symbolic Decode Option WS10-ARINC429bus DSymbolic

Audiobus Trigger and Decode Option

for I2S, LJ, RJ, and TDM

WS10-Audiobus TD

CAN Trigger and Decode Option WS10-CANbus TD

CAN FD Trigger and Decode Option WS10-CAN FDbus TD

D-PHY Decode Option

WS10

-DPHYbus D

DigRF 3G Decode Option WS10-DigRF3Gbus D

DigRF v4 Decode Option WS10-DigRFv4bus D

ENET Decode Option WS10-ENETbus D

FlexRay Trigger and Decode Option WS10-FlexRaybus TD

I2C, SPI and UART Trigger and Decode Option WS10-EMB

I2C Bus Trigger and Decode Option WS10-I2Cbus TD

LIN Trigger and Decode Option WS10-LINbus TD

Manchester Decode Option WS10-Manchesterbus D

MIL-STD-1553 Trigger and Decode Option WS10-1553 TD

NRZ Decode Option WS10-NRZbus D

SENT Decode Option WS10-SENTbus D

SPI Bus Trigger and Decode Option WS10-SPIbus TD

UART and RS-232 Trigger and Decode Option WS10-UART-RS232bus TD

USB 2.0 Decode Option

WS10

-USB2bus D

USB2-HSIC Decode Option WS10-USB2-HSICbus D

Probes

500 MHz Passive Probe 10:1, 10 M

PP011

700 V, 15 MHz High-Voltage Differential Probe AP031

200 MHz, 3.5 pF, 1 M

Active Differential Probe ZD200

1 GHz, 1.0 pF, 1 M

Active Differential Probe ZD1000

Deskew Calibration Source for CP031 and CP030 DCS015

30 A; 50 MHz Current Probe – AC/DC;

Arms

; 50 Apeak Pulse

CP030

30 A; 50 MHz High Sensitivity Current Probe – AC/DC;

Arms

;

50 Apeak Pulse

CP030A

30 A; 100 MHz Current Probe – AC/DC; 30

Arms

; 50 Apeak Pulse CP031

30 A; 100 MHz

High Sensitivity

Current Probe – AC/DC; 30

Arms

;

50 Apeak Pulse

CP031A

150 A; 10 MHz Current Probe – AC/DC; 150 Arms; 500

Apeak

Pulse CP150

500 A; 2 MHz Current Probe – AC/DC; 500 Arms; 700

Apeak

Pulse CP500

1,400 V, 100 MHz High-Voltage Differential Probe ADP305

1,400 V, 20 MHz High-Voltage Differential Probe ADP300

1 Ch, 100 MHz Differential Amplier

with Precision Voltage Source

DA1855A

1.5 GHz, 0.9 pF, 1 M

High Impedance Active Probe ZS1500

Set of 4 ZS1500, 1.5 GHz, 0.9 pF, 1 M

High Impedance Active Probe

ZS1500-QUADPAK

1 GHz, 0.9 pF, 1 M

High Impedance Active Probe ZS1000

Set of 4 ZS1000, 1 GHz, 0.9 pF, 1 M

High Impedance Active Probe

ZS1000-QUADPAK

25 MHz High Voltage Differential Probe HVD3102

80 MHz High Voltage Differential Probe with 6m cable HVD3106-6M

120 MHz High Voltage Differential Probe HVD3106

wavesurfer10-ds-30apr15

Product or brand names are trademarks or requested trademarks of their respective holders.

Local sales oces are located throughout the world.

Visit our website to nd the most convenient location.

1-800-5-LeCroy

teledynelecroy.com

Customer Service

Teledyne LeCroy oscilloscopes and probes are designed, built, and tested

to ensure high reliability. In the unlikely event you experience difculties,

our digital oscilloscopes are fully warranted for three years and our

probes are warranted for one year. This warranty includes:

• No charge for return shipping • Long-term 7-year support

• Upgrade to latest software at no charge

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Teledyne LeCroy:

WS10-USB2-HSICBUS D WS10-UART-RS232BUS TD WS10-I2CBUS TD WS10-SOFTCASE WS10-LINBUS TD

WS10-PWR WS10-HARDCASE WS10-SENTBUS D WS10-SPECTRUM WS10-MANCHESTERBUS D WS10-M-

TYPE WS10-USB2BUS D WS10-NRZBUS D WS10-SPIBUS TD WS10-RACK