WaveSurfer 10
Oscilloscopes
1 GHz, 10 GS/s
The WaveSurfer 10 combines the MAUI advanced user interface
with powerful waveform processing, in addition to advanced math,
measurement and debug tools, to quickly analyze and nd the root
cause of problems. With a 10.4” touch screen display, high performance
hardware, and compact form factor the WaveSurfer 10 is unique among
1 GHz oscilloscopes.
MAUI - A New Wave of Thinking
MAUI is the most advanced
oscilloscope user interface. MAUI
is designed for touch; all important
oscilloscope controls are accessed
through the intuitive touch screen.
MAUI is built for simplicity; time
saving shortcuts and intuitive dialogs
simplify setup. MAUI is made to solve;
deep set of debug and analysis
tools help identify problems and nd
solutions quickly.
Uncompromised Performance
Many 1 GHz oscilloscopes are avail-
able at attractive entry-point prices,
however, they are often limited in
sample rate, memory or features. The
WaveSurfer 10 provides uncompro-
mised 1 GHz performance with up
to 10 GS/s per channel and 32 Mpts
of memory.
Advanced Debug Toolkit
With the addition of the Advanced
Debug Toolkit, the WaveSurfer 10
becomes an unparalleled debug and
analysis machine adding 10 GS/s
sample rate on 4 channels, 32 Mpts
of memory, sequence mode, history
mode, 13 additional math functions,
and 2 simultaneous math traces.
Capture Debug, Analyze,
Document
Easily accessible measurement, math
and debug tools, plus a wide variety of
serial data protocol decoders, and ac-
tive probes ensure the WaveSurfer 10
can capture and analyze any type of
waveform and simplify the debug pro-
cess. The LabNotebook tool provides
a fast way to save waveforms, save
setups and screen images, report
results, and view offline.
Key Features
1 GHz, 10 GS/s, up to 16 Mpts/ch
MAUI - Advanced User Interface
Designed for Touch
Built for Simplicity
Made to Solve
WaveScan - Advanced Search
and Find
LabNotebook Documentation and
Report Generation
10.4” Touch Screen Display
Spectrum Analyzer Mode
Power Analysis Software
Serial Trigger and Decode
I2C, SPI, UART
CAN, LIN, FlexRay, SENT
Ethernet 10/100BaseT,
USB 1.0/1.1/2.0, USB2.0-HSIC
Audio (I2S, LJ, RJ, TDM)
MIL-STD-1553, ARINC 429
MIPI D-PHY, DigRF 3G, DigRF v4
Manchester, NRZ
Advanced Debug Toolkit adds:
10 GS/s on all 4 channels
16 Mpts/ch memory (32 Intlv’d)
Sequence Mode Segmented
Memory
History Mode Waveform
Playback
13 Additional Math Operators
2 Math Functions
2
MAUI – A NEW WAVE OF THINKING
MAUI is the most advanced oscilloscope user interface
developed to put all the power and capabilities of the modern
oscilloscope right at your ngertips. Designed for touch;
all important oscilloscope controls are accessed through the
intuitive touch screen. Built for simplicity; time saving
shortcuts and intuitive dialogs simplify setup. Made to solve;
a deep set of debug and analysis tools helps identify problems
and nd solutions quickly.
Oscilloscopes are constantly evolving to meet the rapidly changing test and measurement needs of today’s cutting edge
designs. Additional complexity and capabilities are introduced with each new feature, and in some cases when capabilities
of other instruments like a protocol analyzer, function generator or logic analyzer are added. With all this added capability
the oscilloscope becomes complex and cumbersome to use. The traditional user interface consisting of knobs, buttons,
soft keys and nested menus is unmanageable and more buttons are typically added to access the new functionality.
MAUI solves the complexity problem. MAUI eliminates the overwhelming number of buttons and knobs providing an
intuitive user interface that is designed for touch, built for simplicity and made to solve without sacricing any features or
cutting edge test capabilities.
MAUI is designed for touch. All
important controls for vertical,
horizontal and trigger are always
one touch away. Touch the
waveform to position and drag a
box around it to zoom in for more
details. Position cursors, congure
measurements and interact with
tables all through simple
touch operation.
Designed for Touch
3
Made to Solve
MAUI is built for simplicity. Basic
waveform viewing and measure-
ment tools as well as advanced
math and analysis capabilities are
seamlessly integrated in a single
user interface. Time saving short-
cuts and intuitive dialogs simplify
setup and shorten debug time.
MAUI is made to solve. Measure all
aspects of a waveform to identify
problems. Debug with a large set of
time saving tools to nd the cause
of problems. Solve problems fast
with powerful analysis tools.
Built for Simplicity
A
B
C
D
A
B
C
Access shortcuts to analysis tools
by touching the waveform.
Congure parameters by touching
measurement results.
Channel, timebase and trigger
descriptors provide easy access to
controls without navigating menus.
DShortcuts to commonly used functions
are displayed at the bottom of the
channel, math and memory menus.
4
Embedded Controller Design
and Debug
Save time when working with embedded
controllers by adding high-performance
mixed signal capability with the
WaveSurfer 10. Capture digital signals
up to 250 MHz with up to 10 Mpts/Ch
memory, 1 GS/s and 18 channels.
Quickly and easily isolate specic
serial data events with I2C, SPI, UART,
RS-232, USB 1.0/1.1/2.0, USB2-HSIC,
10/100Base T ENET, Audio (I2S, LJ, RJ,
TDM), MIL-STD-1553, ARINC 429,
MIPI D-PHY, DigRF, CAN, CAN FD, LIN,
FlexRay, SENT, Manchester, and NRZ
trigger and decode options.
Advanced Math and Measure
Use automatic measurement param-
eters with statistics and histicons as
well as math functions to understand
every waveform detail.
WaveStream Fast Viewing Mode
WaveStream provides a vibrant,
intensity graded (256 levels) display
with a fast update to closely
simulate the look and feel of an
analog oscilloscope.
ADVANCED TOOLS FOR WAVEFORM ANALYSIS
Pass/Fail Mask Testing
Built-in masking testing quickly
identies problems and marks the
location. A history of the pass/fail
results can be displayed on the screen.
LabNotebook Documentation
and Report Generation Tool
Save all results and data with a
single button press and create
custom reports with LabNotebook.
WaveScan Advanced Search
and Find Tool
Quickly search waveforms for
runts, glitches or other anomalies
with WaveScan.
Enhanced Resolution
The enhanced resolution (ERES)
feature improves vertical resolu-
tion of the oscilloscope resulting
in cleaner traces and the ability to
see more signal details. Up to
3 bits of ERES can be applied.
5
LabNotebook Documentation Tool
LabNotebook is a one-button tool to save and restore waveforms, measurements
and settings without navigating multiple menus. Custom reports can be created and
easily shared; saved waveforms can be measured and analyzed later both on the
oscilloscope or offline using the WaveStudio PC Utility.
WaveStudio Oine Analysis Tool
WaveStudio is a fast and easy way to analyze acquired waveforms offline. Offline
tools include x and y axis cursors for quick measurements and 21 built-in automatic
measurements for more precise and accurate results. WaveStudio can also connect
to the oscilloscope for direct data transfer to the PC. Data saved with LabNotebook
can be shared with others using WaveStudio for easy collaboration.
Advanced Probe Interface
The advanced active probe
interface gives tremendous
exibility for measuring high
voltages, high frequencies,
currents, or differential signals.
High Impedance Active Probes
High Bandwidth
Differential Probes
High Voltage Differential Probes
High Voltage Passive Probes
Current Probes
Waveform
V/div
T/div
Memory Length
Sample Rate
Measurement
Math
Screen Capture
Waveform
V/div
T/div
Memory Length
Sample Rate
Measurement
Math
Screen Capture
Waveform
V/div
T/div
Memory Length
Sample Rate
Measurement
Math
Screen Capture
REPORT
6
ADVANCED DEBUG TOOLKIT
The WaveSurfer 10M includes the
Advanced Debug Toolkit software
which makes it an unparalleled
debug and analysis machine. The
high sample rate of 10 GS/s on all 4
channels, 32 Mpts of memory,
sequence mode segmented
memory, history mode waveform
playback, 13 additional math
functions, and 2 simultaneous
math traces, all included in this
powerful debug package, enable
the WaveSurfer 10M to perform
advanced analysis on long captures
with 10x oversampling to nd the
root cause of problems.
With 10 GS/s and 16 Mpts per channel every detail of
a signal will be captured and displayed. In 4 channel
operation 1.6ms of data can be captured at full sample
rate, in 2 channel mode, 3.2ms, to ensure no detail or
anomaly is missed.
13 additional math operators are added to the already
wide variety of math functions to allow deeper
analysis. Included additional functions are absolute
value, average (summed or continuous), envelope,
enhanced resolution, exp (base e), exp (base 10),
floor, invert, log (base e), log (base 10), reciprocal,
roof, and trend.
Congure and view 2 simultaneous math traces, each
math trace can perform dual math operation enabling
complex analysis and faster troubleshooting.
Histicons display the statistical distribution of each
measurement parameter. Anomalies in measurement
data can quickly be seen and then analyzed to nd
the root cause of problems faster. Histicons are auto-
scaled so outliers can never be missed.
A
B
C
D
A
B
C
D
7
Advanced Waveform Capture
with Sequence Mode
Use Sequence mode to store up to
5,000 triggered events as “segments”
into memory. This can be ideal when
capturing many fast pulses in quick
succession or when capturing events
separated by long time periods.
Sequence mode provides timestamps
for each acquisition and minimizes
dead-time between triggers to less than
1 μ s. Combine Sequence mode with
advanced triggers to isolate rare events
over time and analyze afterwards.
History Mode Waveform Playback
Scroll back in time using History Mode to view previous waveforms and isolate anomalies. Use cursors and measurement
parameters to quickly nd the source of problems. History mode is always available with a single button press, no need to
enable this mode and never miss a waveform.
Go Back in Time to Identify the Source of a Problem
8
High-performance Mixed
Signal Capabilities
Embedded controller design and debug
involves capturing and viewing a
number of different types of signals.
These signals are typically a mix of
analog, digital, and serial data wave-
forms from a combination of analog
sensors, microcontrollers and peripheral
devices. With the ability to capture digital
signals with speeds up to 250 MHz
and long memory of 10 Mpts/Ch the
WaveSurfer 10 provides unmatched
mixed signal performance. The
WaveSurfer 10 is the ideal tool for test-
ing embedded systems with 8-bit micro-
controllers or slower digital signals.
With 18 digital inputs each with
250 MHz maximum input frequency
and 10 Mpts/Ch memory, the
WaveSurfer 10 is an outstanding value
and provides a complete set of tools for
embedded system testing.
Extensive Triggering
The WaveSurfer 10 has extensive digital
trigger capabilities. Normal oscilloscope
triggers will operate on digital inputs.
Cross-pattern triggering allows for
simple or complex trigger patterns to be
setup with any combination of analog
and digital channels. Event triggering
can be congured to arm on an analog
signal and trigger on a digital pattern.
Quick Mixed Signal Setup,
Easy-to-use
Unlike a traditional Logic Analyzer, the
WaveSurfer 10 is easy to use. A simple
connection links the oscilloscope with
the digital inputs so users can start
viewing signals and begin debugging
quickly. In addition, all standard
oscilloscope tools are readily
accessible. Signal debug is simple,
using standard oscilloscope tools,
such as cursors, measurement
parameters, and zooming.
EMBEDDED CONTROLLER DESIGN AND DEBUG
Teledyne LeCroy’s versatile WaveSurfer 10 mixed signal oscilloscope combines the powerful
WaveSurfer 10 with the exibility of digital inputs using the MS-250. In addition, the many
triggering and decoding options turn the WaveSurfer 10 into an all-in-one analog, digital, and serial
data trigger, acquisition, and debug machine.
9
View decoded protocol information on top of physical layer waveforms and trigger on protocol
specic messages.
Powerful Serial Data Triggers
The serial data trigger will quickly
isolate events on a bus eliminating
the need to set manual triggers and
hoping to catch the right information.
Trigger conditions can be entered in
binary or hexadecimal formats and
conditional trigger capabilities even
allow triggering on a range of
different events.
Intuitive, Color-Coded
Decode Overlay
Protocol decoding is shown directly
on the waveform with an intuitive,
color-coded overlay and presented in
binary, hex or ASCII. Decoding on the
WaveSurfer 10 is fast even with long
memory and zooming in to the wave-
form shows precise byte by
byte decoding.
Table Summary and Search/Zoom
To further simplify the debug process
all decoded data can be displayed in a
table below the waveform grid.
Selecting an entry in the table with
the touch screen will display just
that event. Additionally, built-in
search functionality will nd specic
decoded values.
SERIAL TRIGGER AND DECODE OPTIONS
Supported Serial Data
Protocols
I2C, SPI, UART
CAN, CAN FD, LIN, FlexRay™, SENT
Ethernet 10/100BaseT,
USB 1.0/1.1/2.0, USB 2.0-HSIC
Audio (I2S, LJ, RJ, TDM)
MIL-STD-1553, ARINC 429
MIPI D-PHY, DigRF 3G, DigRF v4
Manchester, NRZ
Debugging serial data busses can be confusing and time consuming. The serial data and
decode options for WaveSurfer 10 provide time saving tools for serial bus debug and validation.
10
Simple Frequency Domain Analysis
Get better insight to the frequency
content of any signal with use of
the Spectrum Analyzer mode on the
WaveSurfer 10. This mode provides a
spectrum analyzer style user interface
with controls for start/stop frequency
or center frequency and span. The
unique peak search automatically
labels spectral components and pres-
ents frequency and level in an interac-
tive table. Utilize up to 20 markers to
automatically identify harmonics and
monitor how the spectrum changes
over time using the spectrogram which
can display a 2D or 3D history of the
frequency content.
SPECTRUM AND POWER ANALYZER
Power Analyzer Automates
Switching Device Loss
Measurements
Quickly measure and analyze the
operating characteristics of power
conversion devices and circuits with
the Power Analyzer option. Critical
power switching device measurements,
control loop modulation analysis,
and line power harmonic testing are
all simplied with a dedicated user
interface and automatic measure-
ments. Areas of turn-on, turn-off, and
conduction loss are all identied with
color-coded waveform overlays for
faster analysis.
Power Analyzer provides quick and
easy setup of voltage and current in-
puts and makes measurements
as simple as the push of a
button. Tools are provided to help re-
duce sources of measurement errors
and the measurement parameters pro-
vide details of single cycle or average
device power losses.
Beyond the advanced power loss mea-
surement capabilities, the Power
Analyzer modulation analysis capa-
bilities provide insight to understand
control loop response to critical events
such as a power supply’s soft start per-
formance or step response to line and
load changes. The Line Power Analysis
tool allows simple and quick pre-compli-
ance testing to EN 61000-3-2.
11
WAVESURFER 10 SPECIFICATIONS
Analog - Vertical
Bandwidth (@ 50Ω) 1 GHz
Rise time 350 ps
Input Channels 4
Resolution 8 bits
Sensitivity 2 mV/div–10 V/div (1 MΩ);
2 mV/div–1 V/div (50 Ω)
DC Gain Accuracy ±1.0% of full scale (typical); ±1.5% of
full scale ≥ 10 mV/div (warranted)
BW Limit 20 MHz, 200 MHz
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC +
Peak AC ≤10 kHz)
Input Coupling AC, DC, GND (DC and GND for 50 Ω)
Input Impedance 1 MΩ || 16 pF, or 50 Ω
Analog - Acquisition
Sample Rate (Single-shot) 5 GS/s (10 GS/s Interleaved)
Sample Rate (Repetitive) 50 GS/s
Record Length 10 Mpts/Ch (all channels),
20 Mpts (interleaved)
Capture Time Up to 2.0 ms at full sample rate on all
four channels
Acquisition Modes Real Time, Roll, RIS (Random
Interleaved Sampling), WaveStream
(Fast Viewing Mode).
Timebase Range 200 ps/div–1000 s/div
(Roll Mode available at ≥ 100 ms/div
and ≤ 5 MS/s)
Timebase Accuracy ≤ 5 ppm @ 25 °C (typical) (≤ 10 ppm @
5–40 °C)
Digital - Vertical and Acquisition (with MS-250 Mixed Signal Option)
Input Channels 18 (D0-D17)
Input Impedance 100 kΩ || 5.0 pF
Maximum Input Voltage ±30 V non-destruct
Threshold Groupings D0–D8, D9–D17
Threshold Selections TTL, ECL, CMOS, PECL, LVDS,
User Dened
Sample Rate 1 GS/s
Record Length 10 Mpts/Ch
Minimum Detectable Pulse
Width
2 ns
Maximum Input Frequency 250 MHz
Trigger System
Modes Normal, Auto, Single, and Stop
Sources
Any input channel, External, Ext/10,
or line; slope and level unique to each
source (except for line trigger)
Coupling DC, AC, HFRej, LFRej
Pre-trigger Delay 0-100% of full scale
Post-trigger Delay 0-10,000 Divisions
Hold-off 1 ns to 20 s or 1 to 1,000,000,000 events
Internal Trigger Level Range ±4.1 div from center
External Trigger Level Range EXT/10 ±4V; EXT ±400 mV
Trigger Types Edge, Glitch, Width, Logic (Pattern),
TV (NTSC, PAL, SECAM, HDTV–720p,
1080i, 1080p), Runt, Slew Rate,
Interval (signal or Pattern), Dropout,
Qualied (State or Edge)
Probes
Standard Probes One PP011 (5 mm)per channel
Probing System BNC and Teledyne LeCroy ProBus for
Active voltage, current and differential
probes
Display System
Display Size Color, 10.4” TFT-LCD Touch Screen
Display Resolution SVGA: 800 x 600 pixels
Measure, Zoom and Math Tools
Measurement Parameters Up to 6 of the following parameters
can be calculated at one time on any
waveform: Amplitude, Area, Base
(Low), Delay,Parameters Duty, Fall
Time (90%–10%), Fall Time (80%–
20%), Frequency, Maximum, Mean,
Minimum, Overshoot+, Overshoot-,
Period, Peak-Peak, Phase, Rise Time
(10%–90%), Rise Time (20%–80%),
RMS, Skew, Standard Deviation, Top
(High), Width+, Width-. Measurements
can be gated.
Zooming Use front panel QuickZoom button, or
use touch screen or mouse to draw a
box around the zoom area.
Math Functions Functions include Sum, Difference,
Product, Ratio, Derivative, Deskew,
Integral, Rescale (change scale and
units), Square, Square Root, Zoom and
FFT (up to 1 Mpts with power spec-
trum output and rectangular, VonHann,
and FlatTop windows). 1 math function
may be dened at a time, 2 functions
may be chained together.
WaveSurfer 10M and Advanced Debug
Toolkit Additional Capabilities (Optional)
Sample Rate (SIngle-shot) 10 GS/s on all 4 channels
Record Length 16 Mpts/ch (32 Interleaved)
Additional Acquisition Mode Sequence (Segmented Memory up to
5,000 segments with 1μs intersegment
time)
Additional Math Functions Absolute value, Average (summed
or continuous), Envelope, Enhanced
Resolution, Exp (base e), Exp (base
10), Floor, Invert, Log (base e), Log
(base 10), Reciprocal, Roof and Trend.
2 dual operator math functions may be
dened at a time.
Additional Measurement
Capabilities
Histicons for measurement
distribution analysis
Additional Debug Tools History mode waveform playback
Connectivity
Ethernet Port 10/100/1000Base-T Ethernet interface
(RJ-45 connector)
USB Host Ports (5) USB Ports
GPIB Port (Optional) Supports IEEE – 488.2 (Optional
External Adapter)
External Monitor Port Standard 15-pin D-Type SVGA-
compatible DB-15 connector
Remote Control Via Windows Automation, or via
Teledyne LeCroy Remote Command
Set
Network Communication
Standard
VXI-11 or VICP, LXI Class C Compliant
Physical
Dimensions (HWD) 260 mm x 340 mm x 152 mm
Excluding accessories and projections
(10.25” x 13.4” x 6”)
Net Weight 7.26 kg. (16.0 lbs.)
ORDERING INFORMATION
Product Description Product Code
WaveSurfer 10 Oscilloscopes
1 GHz, 5 GS/s, 4 Ch, 10 Mpts/Ch DSO with 10.4” Touch
Screen Display. 10 GS/s, 20 Mpts Interleaved
WaveSurfer 10
1 GHz, 10 GS/s, 4 Ch, 16 Mpts/Ch DSO with 10.4”
Touch Screen Display. 10 GS/s, 32 Mpts Interleaved
includes WS10-ADT option
WaveSurfer 10M
Included with Standard Congurations
÷10 Passive Probe (Total of 1 Per Channel),
Protective Front Cover, Getting
Started Guide, Commercial NIST Traceable Calibration with Certicate,
Power Cable for the Destination Country, 3-year Warranty
General Accessories
Soft Carrying Case WS10-SOFTCASE
Hard Carrying Case WS10-HARDCASE
Rack Mount Accessory WS10-RACK
Software Options
Advanced Debug Toolkit Option WS10-ADT
Power Analyzer Option WS10-PWR
Spectrum Analyzer Option WS10-SPECTRUM
Local Language Overlays
German Front Panel Overlay WS10-FP-GERMAN
French Front Panel Overlay WS10-FP-FRENCH
Italian Front Panel Overlay WS10-FP-ITALIAN
Spanish Front Panel Overlay WS10-FP-SPANISH
Japanese Front Panel Overlay WS10-FP-JAPANESE
Korean Front Panel Overlay WS10-FP-KOREAN
Chinese (Tr) Front Panel Overlay WS10-FP-CHNES-TR
Chinese (Simp) Front Panel Overlay WS10-FP-CHNES-SI
Russian Front Panel Overlay WS10-FP-RUSSIAN
Mixed Signal Solutions
500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch
Mixed Signal Oscilloscope Option
MS-500
250 MHz,36 Ch,1 GS/s, 25 Mpts/ch
(500 MHz,18 Ch,2 GS/s, 50 Mpts/ch Interleaved)
Mixed Signal Option
MS-500-36
250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch
Mixed Signal Oscilloscope Option
MS-250
Mixed Signal Accessories
Extra Large Gripper Probe Set, Includes 22 probes PK400-0
Large Gripper Probe Set for 0.10 Inch (2.54 mm)
Pin Pitch. Includes 10 Probes with Color-coded Leads
PK400-1
Medium Gripper Probe Set for 0.04 Inch (1.0 mm)
Pin Pitch. Includes 10 Probes with Color-coded Leads
PK400-2
Small Gripper Probe Set for 0.008 Inch (0.2 mm)
Pin Pitch. Includes 10 Probes with Color-coded Leads
PK400-3
18-pin 3M Interface Cable MSO-3M
(Mates with 3M Part Number 2520-6002)
MSO-3M
36 Channel Mictor Connector
(Includes 1 MSO-MICTOR-SHROUD)
MSO-Mictor
Product Description Product Code
Serial Data Options
ARINC 429 Symbolic Decode Option WS10-ARINC429bus DSymbolic
Audiobus Trigger and Decode Option
for I2S, LJ, RJ, and TDM
WS10-Audiobus TD
CAN Trigger and Decode Option WS10-CANbus TD
CAN FD Trigger and Decode Option WS10-CAN FDbus TD
D-PHY Decode Option
WS10
-DPHYbus D
DigRF 3G Decode Option WS10-DigRF3Gbus D
DigRF v4 Decode Option WS10-DigRFv4bus D
ENET Decode Option WS10-ENETbus D
FlexRay Trigger and Decode Option WS10-FlexRaybus TD
I2C, SPI and UART Trigger and Decode Option WS10-EMB
I2C Bus Trigger and Decode Option WS10-I2Cbus TD
LIN Trigger and Decode Option WS10-LINbus TD
Manchester Decode Option WS10-Manchesterbus D
MIL-STD-1553 Trigger and Decode Option WS10-1553 TD
NRZ Decode Option WS10-NRZbus D
SENT Decode Option WS10-SENTbus D
SPI Bus Trigger and Decode Option WS10-SPIbus TD
UART and RS-232 Trigger and Decode Option WS10-UART-RS232bus TD
USB 2.0 Decode Option
WS10
-USB2bus D
USB2-HSIC Decode Option WS10-USB2-HSICbus D
Probes
500 MHz Passive Probe 10:1, 10 M
Ω
PP011
700 V, 15 MHz High-Voltage Differential Probe AP031
200 MHz, 3.5 pF, 1 M
Ω
Active Differential Probe ZD200
1 GHz, 1.0 pF, 1 M
Ω
Active Differential Probe ZD1000
Deskew Calibration Source for CP031 and CP030 DCS015
30 A; 50 MHz Current Probe – AC/DC;
30
Arms
; 50 Apeak Pulse
CP030
30 A; 50 MHz High Sensitivity Current Probe – AC/DC;
30
Arms
;
50 Apeak Pulse
CP030A
30 A; 100 MHz Current Probe – AC/DC; 30
Arms
; 50 Apeak Pulse CP031
30 A; 100 MHz
High Sensitivity
Current Probe – AC/DC; 30
Arms
;
50 Apeak Pulse
CP031A
150 A; 10 MHz Current Probe – AC/DC; 150 Arms; 500
Apeak
Pulse CP150
500 A; 2 MHz Current Probe – AC/DC; 500 Arms; 700
Apeak
Pulse CP500
1,400 V, 100 MHz High-Voltage Differential Probe ADP305
1,400 V, 20 MHz High-Voltage Differential Probe ADP300
1 Ch, 100 MHz Differential Amplier
with Precision Voltage Source
DA1855A
1.5 GHz, 0.9 pF, 1 M
Ω
High Impedance Active Probe ZS1500
Set of 4 ZS1500, 1.5 GHz, 0.9 pF, 1 M
Ω
High Impedance Active Probe
ZS1500-QUADPAK
1 GHz, 0.9 pF, 1 M
Ω
High Impedance Active Probe ZS1000
Set of 4 ZS1000, 1 GHz, 0.9 pF, 1 M
Ω
High Impedance Active Probe
ZS1000-QUADPAK
25 MHz High Voltage Differential Probe HVD3102
80 MHz High Voltage Differential Probe with 6m cable HVD3106-6M
120 MHz High Voltage Differential Probe HVD3106
wavesurfer10-ds-30apr15
© 2015 Teledyne LeCroy, Inc. All rights reserved. Specications, prices, availability, and delivery subject to change without notice.
Product or brand names are trademarks or requested trademarks of their respective holders.
Local sales oces are located throughout the world.
Visit our website to nd the most convenient location.
1-800-5-LeCroy
teledynelecroy.com
Customer Service
Teledyne LeCroy oscilloscopes and probes are designed, built, and tested
to ensure high reliability. In the unlikely event you experience difculties,
our digital oscilloscopes are fully warranted for three years and our
probes are warranted for one year. This warranty includes:
No charge for return shipping Long-term 7-year support
Upgrade to latest software at no charge
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Teledyne LeCroy:
WS10-USB2-HSICBUS D WS10-UART-RS232BUS TD WS10-I2CBUS TD WS10-SOFTCASE WS10-LINBUS TD
WS10-PWR WS10-HARDCASE WS10-SENTBUS D WS10-SPECTRUM WS10-MANCHESTERBUS D WS10-M-
TYPE WS10-USB2BUS D WS10-NRZBUS D WS10-SPIBUS TD WS10-RACK