TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. www.vishay.com Vishay Semiconductors Ultrabright LED, O 5 mm Untinted Non-Diffused Package FEATURES * Untinted non-diffused lens * Utilizing ultrabright AllnGaP (AS) * High luminous intensity * High operating temperature: Tj (chip junction temperature) up to 125 C for AllnGaP devices * Luminous intensity and color categorized for each packing unit 19223 DESCRIPTION * ESD-withstand voltage: up to 2 kV according to JESD22-A114-B The TLC.51.. series is a clear, non-diffused 5 mm LED for high end applications where supreme luminous intensity required. * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS These lamps with clear untinted plastic case utilize the highly developed ultrabright AlInGaP (AS). * Interior and exterior lighting The lens and the viewing angle is optimized to achieve best performance of light output and visibility. * Outdoor LED panels PRODUCT GROUP AND PACKAGE DATA * Product group: LED * Central high mounted stop lights (CHMSL) for motor vehicles * Package: 5 mm * Replaces incandescent lamps * Product series: power * Traffic signals * Angle of half intensity: 9 * Light guide design * Instrumentation and front panel indicators PARTS TABLE PART TLCS5100 COLOR LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE at IF at IF at IF (mcd) (nm) (V) TECHNOLOGY (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. Super red 2400 7500 - 50 626 630 638 50 - 2.1 2.7 50 AllnGaP on GaAs TLCR5100 Red 4300 11 000 - 50 611 616 622 50 - 2.1 2.7 50 AllnGaP on GaAs TLCO5100 Soft orange 4300 12 000 - 50 600 605 611 50 - 2.1 2.7 50 AllnGaP on GaAs TLCY5100 Yellow 3200 7500 - 50 585 590 597 50 - 2.1 2.7 50 AllnGaP on GaAs TLCY5100-ASZ Yellow 3200 7500 - 50 585 590 597 50 - 2.1 2.7 50 AllnGaP on GaAs TLCYG5100 Yellow green 1350 3500 - 50 565 572 576 50 - 2.2 2.7 50 AllnGaP on GaAs TLCPG5100 Pure green 430 1250 - 50 555 562 567 50 - 2.1 2.7 50 AllnGaP on GaAs ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. PARAMETER Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction/ambient TEST CONDITION Tamb 85 C tp 10 s t 5 s, 2 mm from body SYMBOL VR IF IFSM PV Tj Tamb Tstg Tsd RthJA VALUE 5 50 1 135 125 -40 to +100 -40 to +100 260 300 UNIT V mA A mW C C C C K/W Note (1) Driving the LED in reverse direction is suitable for a short term application Rev. 1.8, 03-Feb-16 Document Number: 81346 1 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) TLCS5100, SUPER RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 50 mA TLCS5100 IV 2400 7500 - mcd Dominant wavelength IF = 50 mA d 626 630 638 nm Peak wavelength IF = 50 mA p - 641 - nm Spectral bandwidth at 50 % Irel max. IF = 50 mA - 20 - nm Angle of half intensity IF = 50 mA - 9 - deg Forward voltage IF = 50 mA VF - 2.1 2.7 V Reverse voltage IR = 10 A VR 5 - - V Temperature coefficient of VF IF = 50 mA TCVF - -2 - mV/K Temperature coefficient of d IF = 50 mA TCd - 0.04 - nm/K Note (1) In one packing unit I Vmax./IVmin. 2.0 OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) TLCR5100, RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 50 mA TLCR5100 IV 4300 11 000 - mcd Dominant wavelength IF = 50 mA d 611 616 622 nm Peak wavelength IF = 50 mA p - 622 - nm Spectral bandwidth at 50 % Irel max. IF = 50 mA - 18 - nm deg Angle of half intensity IF = 50 mA - 9 - Forward voltage IF = 50 mA VF - 2.1 2.7 V Reverse voltage IR = 10 A VR 5 - - V Temperature coefficient of VF IF = 50 mA TCVF - -3.5 - mV/K Temperature coefficient of d IF = 50 mA TCd - 0.05 - nm/K Note (1) In one packing unit I Vmax./IVmin. 2.0 OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) TLCO5100, SOFT ORANGE PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 50 mA TLCO5100 IV 4300 12 000 - mcd Dominant wavelength IF = 50 mA d 600 605 611 nm Peak wavelength IF = 50 mA p - 611 - nm Spectral bandwidth at 50 % Irel max. IF = 50 mA - 17 - nm deg Angle of half intensity IF = 50 mA - 9 - Forward voltage IF = 50 mA VF - 2.1 2.7 V Reverse voltage IR = 10 A VR 5 - - V Temperature coefficient of VF IF = 50 mA TCVF - -2.5 - mV/K Temperature coefficient of d IF = 50 mA TCd - 0.1 - nm/K Note (1) In one packing unit I Vmax./IVmin. 2.0 Rev. 1.8, 03-Feb-16 Document Number: 81346 2 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) TLCY5100, YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 50 mA TLCY5100 IV 3200 7500 - mcd Dominant wavelength IF = 50 mA d 585 590 597 nm Peak wavelength IF = 50 mA p - 593 - nm Spectral bandwidth at 50 % Irel max. IF = 50 mA - 17 - nm Angle of half intensity IF = 50 mA - 9 - deg Forward voltage IF = 50 mA VF - 2.1 2.7 V Reverse voltage IR = 10 A VR 5 - - V Temperature coefficient of VF IF = 50 mA TCVF - -3.5 - mV/K Temperature coefficient of d IF = 50 mA TCd - 0.1 - nm/K Note (1) In one packing unit I Vmax./IVmin. 2.0 OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) TLCYG5100, YELLOW GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 50 mA TLCYG5100 IV 1350 3500 - mcd Dominant wavelength IF = 50 mA d 565 572 576 nm Peak wavelength IF = 50 mA p - 574 - nm Spectral bandwidth at 50 % Irel max. IF = 50 mA - 15 - nm deg Angle of half intensity IF = 50 mA - 9 - Forward voltage IF = 50 mA VF - 2.2 2.7 V Reverse voltage IR = 10 A VR 5 - - V Temperature coefficient of VF IF = 50 mA TCVF - -4.5 - mV/K Temperature coefficient of d IF = 50 mA TCd - 0.1 - nm/K Note (1) In one packing unit I Vmax./IVmin. 2.0 OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) TLCPG5100, PURE GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) IF = 50 mA TLCPG5100 IV 430 1250 - mcd Dominant wavelength IF = 50 mA d 555 562 567 nm Peak wavelength IF = 50 mA p - 563 - nm Spectral bandwidth at 50 % Irel max. IF = 50 mA - 20 - nm deg Angle of half intensity IF = 50 mA - 9 - Forward voltage IF = 50 mA VF - 2.1 2.7 V Reverse voltage IR = 10 A VR 5 - - V Temperature coefficient of VF IF = 50 mA TCVF - -3.5 - mV/K Temperature coefficient of d IF = 50 mA TCd - 0.1 - nm/K Note (1) In one packing unit I Vmax./IVmin. 2.0 Rev. 1.8, 03-Feb-16 Document Number: 81346 3 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. www.vishay.com Vishay Semiconductors LUMINOUS INTENSITY CLASSIFICATION GROUP LUMINOUS INTENSITY (mcd) STANDARD MIN. MAX. BB 430 860 CC 575 1150 DD 750 1500 EE 1000 2000 FF 1350 2700 GG 1800 3600 HH 2400 4800 II 3200 6400 KK 4300 8600 LL 5750 11 500 MM 7500 15 000 NN 10 000 20 000 PP 13 500 27 000 QQ 18 000 36 000 RR 24 000 48 000 SS 32 000 64 000 TT 43 000 86 000 UU 57 500 115 000 Note * Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each bag (there will be no mixing of two groups on each bag). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one bag. In order to ensure availability, single wavelength groups will not be orderable. COLOR CLASSIFICATION DOM. WAVELENGTH (nm) GROUP RED SOFT ORANGE YELLOW YELLOW GREEN PURE GREEN MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. 0 - - - - 585 588 - - 555 559 1 611 618 - - 587 591 - - 558 561 2 614 622 600 603 589 594 - - 560 563 3 - - 602 605 592 597 - - 562 565 4 - - 604 607 - - - - 564 567 5 - - 606 609 - - 565 570 - - 6 - - 608 611 - - 567 572 - - 7 - - - - - - 569 574 - - 8 - - - - - - 571 576 - - Note * Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of 1 nm. Rev. 1.8, 03-Feb-16 Document Number: 81346 4 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 60 100 IF - Forward Current (mA) IF - Forward Current (mA) 50 pure green yellow green yellow soft orange red super red 40 30 20 10 60 40 20 0 0 20 40 60 80 100 0 1.5 120 Tamb - Ambient Temperature (C) 16710_1 100 0.8 0.6 0.4 0.2 0.0 600 yellow green pure green IF - Forward Current (mA) super red 80 60 40 20 0 620 640 660 680 700 1.6 - Wavelength (nm) 17045_1 Fig. 2 - Relative Intensity vs. Wavelength 0 10 0.9 50 0.8 60 70 0.7 - Angular Displacement 30 40 2.0 2.2 2.4 2.6 Fig. 5 - Forward Current vs. Forward Voltage 20 1.0 1.8 VF - Forward Voltage (V) 18644 10 IV rel - Relative Luminous Intensity IV rel - Relative Luminous Intensity 2.5 Fig. 4 - Forward Current vs. Forward Voltage 1.2 Srel - Relative Sensitivity 1.7 1.9 2.1 2.3 VF - Forward Voltage (V) 15974_1 Fig. 1 - Forward Current vs. Ambient Temperature 1.0 super red red soft orange yellow 80 super red 1 0 80 0.01 0.6 0.4 0.2 1 0 17042 94 8351 Fig. 3 - Relative Radiant Sensitivity vs. Angular Displacement Rev. 1.8, 03-Feb-16 10 100 IF - Forward Current (mA) Fig. 6 - Relative Luminous Flux vs. Forward Current Document Number: 81346 5 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. Vishay Semiconductors 1.2 1.5 Irel. - Relative Luminous Intensity d - Change of Dom. Wavelength (nm) www.vishay.com super red 1.0 0.5 0.0 -0.5 -1.0 -1.5 IF - Forward Current (mA) super red 2.0 1.5 1.0 0.5 630 650 670 red 1 0.1 1 10 Fig. 11 - Relative Luminous Flux vs. Forward Current - Change of Dom. Wavelength (nm) 150 100 50 mA 50 10 mA - 50 - 100 - 150 100 IF - Forward Current (mA) 1.5 red 1.0 0.5 0.0 - 0.5 - 1.0 d VF - Change of Forward Voltage (mV) super red 30 mA - 1.5 - 25 0 25 50 75 100 Tamb - Ambient Temperature (C) Fig. 9 - Change of Forward Voltage vs. Ambient Temperature Rev. 1.8, 03-Feb-16 610 - Wavelength (nm) 17037 200 17039_1 590 10 100 250 - 200 - 50 0.2 0.01 - 25 0 25 50 75 Tamb - Ambient Temperature (C) Fig. 8 - Relative Luminous Intensity vs. Ambient Temperature 0 0.4 Fig. 10 - Relative Intensity vs. Wavelength IV rel - Relative Luminous Intensity IV rel - Relative Luminous Intensity 2.5 17040_1 0.6 16007 Fig. 7 - Change of Dominant Wavelength vs. Ambient Temperature 0.0 - 50 0.8 0.0 570 10 20 30 40 50 60 70 80 90 100 17043-1 red 1.0 17038 10 20 30 40 50 60 70 80 90 100 IF - Forward Current (mA) Fig. 12 - Changes of Dominant Wavelength vs. Forward Current Document Number: 81346 6 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. www.vishay.com Vishay Semiconductors 1.2 IV rel - Relative Luminous Intensity IV rel - Relative Luminous Intensity 2.5 red 2.0 1.5 1.0 0.5 0.0 - 50 - 25 0 25 50 75 0.4 0.2 620 640 660 10 200 red 50 mA 150 100 30 mA 0 10 mA - 50 - 100 - 150 - 200 - 50 17034 600 Fig. 16 - Relative Intensity vs. Wavelength 250 50 580 - Wavelength (nm) 16314 soft orange IV rel - Relative Luminous Intensity VF - Change of Forward Voltage (mV) 0.6 0.0 560 Fig. 13 - Relative Luminous Intensity vs. Ambient Temperature 1 0.1 0.01 - 25 0 25 50 75 1 100 Tamb - Ambient Temperature (C) Fig. 14 - Change of Forward Voltage vs. Ambient Temperature red 4 2 0 -2 -4 10 IF - Forward Current (mA) 100 Fig. 17 - Relative Luminous Flux vs. Forward Current - Change of Dom. Wavelength (nm) 6 17023 1.5 soft orange 1.0 0.5 0.0 - 0.5 - 1.0 d d- Change of Dom. Wavelength (nm) 0.8 100 Tamb - Ambient Temperature (C) 17035 soft orange 1.0 -6 - 50 17036 - 1.5 - 25 0 25 50 75 100 Tamb - Ambient Temperature (C) Fig. 15 - Change of Dominant Wavelength vs. Ambient Temperature Rev. 1.8, 03-Feb-16 17024 10 20 30 40 50 60 70 80 90 100 IF - Forward Current (mA) Fig. 18 - Change of Dominant Wavelength vs. Forward Current Document Number: 81346 7 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. www.vishay.com Vishay Semiconductors 2.5 IV rel. - Relative Luminous Intensity 1.2 IV rel - Relative Luminous Intensity soft orange 2.0 1.5 1.0 0.5 0.0 - 50 17021 VF - Change of Forward Voltage (mV) 0.2 540 560 580 600 620 640 - Wavelength (nm) Fig. 22 - Relative Intensity vs. Wavelength IV rel - Relative Luminous Intensity 30 mA 150 100 soft orange 50 10 mA - 50 - 100 - 150 yellow 1 0.1 0.01 - 25 0 25 50 75 Tamb - Ambient Temperature (C) 1 100 17018 6 soft orange 4 2 0 -2 100 1.5 yellow 1.0 0.5 0.0 - 0.5 - 1.0 d d -4 10 IF - Forward Current (mA) Fig. 23 - Relative Luminous Flux vs. Forward Current - Change of Dom. Wavelength (nm) Fig. 20 - Change of Forward Voltage vs. Ambient Temperature - Change of Dom. Wavelength (nm) 0.4 10 50 mA 200 17020 0.6 16008 250 - 200 - 50 0.8 0 - 25 0 25 50 75 100 Tamb - Ambient Temperature (C) Fig. 19 - Relative Luminous Intensity vs. Ambient Temperature 0 yellow 1.0 -6 - 50 17022 - 1.5 - 25 0 25 50 75 100 Tamb - Ambient Temperature (C) Fig. 21 - Change of Dominant Wavelength vs. Ambient Temperature Rev. 1.8, 03-Feb-16 17019 10 20 30 40 50 60 70 80 90 100 IF - Forward Current (mA) Fig. 24 - Change of Dominant Wavelength vs. Forward Current Document Number: 81346 8 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. www.vishay.com Vishay Semiconductors 1.2 IV rel - Relative Luminous Intensity yellow 2.0 1.5 1.0 0.5 0.0 - 50 - 25 0 25 50 75 Tamb - Ambient Temperature (C) 17016 d - Change of Dom. Wavelength (nm) yellow 4 2 0 -2 -4 0 25 50 75 VF - Change of Forward Voltage (mV) 250 30 mA 200 yellow 150 100 50 0 10 mA - 50 - 100 - 150 - 200 - 50 17015 - 25 0 25 50 75 100 Tamb - Ambient Temperature (C) Fig. 27 - Change of Forward Voltage vs. Ambient Temperature Rev. 1.8, 03-Feb-16 0.2 540 560 580 600 620 - Wavelength (nm) yellow green 1 0.1 0.01 1 18646 Fig. 26 - Change of Dominant Wavelength vs. Ambient Temperature 50 mA 0.4 10 100 Tamb - Ambient Temperature (C) 17017 0.6 Fig. 28 - Relative Intensity vs. Wavelength IV rel - Relative Luminous Intensity 6 - 25 0.8 18647 Fig. 25 - Relative Luminous Intensity vs. Ambient Temperature -6 - 50 yellow green 1.0 0.0 520 100 10 100 IF - Forward Current (mA) Fig. 29 - Relative Luminous Flux vs. Forward Current d- Change of Dom. Wavelength (nm) IV rel - Relative Luminous Intensity 2.5 3 yellow green 2 1 0 -1 -2 -3 18649 10 20 30 40 50 60 70 80 90 100 IF - Forward Current (mA) Fig. 30 - Change of Dominant Wavelength vs. Forward Current Document Number: 81346 9 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. www.vishay.com Vishay Semiconductors 1.2 IV rel - Relative Luminous Intensity 2.5 IV rel - Relative Luminous Intensity yellow green 2.0 1.5 1.0 0.5 0 - 50 18619 - 25 0 25 50 75 Tamb - Ambient Temperature (C) 0.6 0.4 0.2 0.0 510 530 550 570 590 610 - Wavelength (nm) 18648 Fig. 34 - Relative Intensity vs. Wavelength 10 8 yellow green IV rel - Relative Luminous Intensity d - Change of Dom. Wavelength (nm) 0.8 100 Fig. 31 - Relative Luminous Intensity vs. Ambient Temperature 6 4 2 0 -2 -4 -6 -8 - 50 0 25 50 75 0.1 yellow green 50 mA 400 300 200 100 10 mA - 100 100 3 pure green 2 1 0 -1 -2 d - 200 10 IF - Forward Current (mA) Fig. 35 - Relative Luminous Flux vs. Forward Current - Change of Dom. Wavelength (nm) 30 mA 1 18645 600 0 1 100 Fig. 32 - Change of Dominant Wavelength vs. Ambient Temperature 500 pure green 0.01 - 25 Tamb - Ambient Temperature (C) 18620 VF - Change of Forward Voltage (mV) pure green 1.0 - 300 - 50 18618_1 -3 - 25 0 25 50 75 Tamb - Ambient Temperature (C) 100 Fig. 33 - Change of Forward Voltage vs. Ambient Temperature Rev. 1.8, 03-Feb-16 18650 10 20 30 40 50 60 70 80 90 100 IF - Forward Current (mA) Fig. 36 - Change of Dominant Wavelength vs. Forward Current Document Number: 81346 10 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. Vishay Semiconductors 3.0 pure green 2.5 2.0 1.5 1.0 0.5 0.0 - 50 18616 - 25 0 25 50 75 100 Tamb - Ambient Temperature (C) d - Change of Dom. Wavelength (nm) Fig. 37 - Relative Luminous Intensity vs. Ambient Temperature VF - Change of Forward Voltage (mV) IV rel - Relative Luminous Intensity www.vishay.com 600 pure green 500 400 30 mA 300 50 mA 200 100 0 - 100 10 mA - 200 - 300 - 50 18615 - 25 0 25 50 75 100 Tamb - Ambient Temperature (C) Fig. 39 - Change of Forward Voltage vs. Ambient Temperature 8 pure green 6 4 2 0 -2 -4 -6 -8 - 50 18617 - 25 0 25 50 75 100 Tamb - Ambient Temperature (C) Fig. 38 - Change of Dominant Wavelength vs. Ambient Temperature Rev. 1.8, 03-Feb-16 Document Number: 81346 11 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters A C (5.1) < 0.7 7.7 0.15 8.7 0.3 12.9 0.3 O 5.8 0.15 R 2.49 (sphere) 35.9 0.55 Area not plane 1.1 0.25 0.15 1 min. O5 technical drawings according to DIN specifications 0.5 + 0.15 - 0.05 Drawing-No.: 6.544-5258.04-4 Issue: 9; 23.07.10 0.5 + 0.15 - 0.05 2.54 nom. 96 12121 TAPE AMMOPACK Tape feed Diodes: anode before cathode Phototransistors: emitter before collector Code 21 Adhesive tape Identification label Reel Label Diodes: cathode before anode Phototransistors: collector before emitter Code 12 C Paper A Tape 94 8671 Fig. 40 - LED in Tape B 94 8667-1 Fig. 41 - Tape Direction Note * The new nomenclature for ammopack is e.g. ASZ only, without suffix for the LED orientation. The carton box has to be turned to the desired position: "+" for anode first, or "-" for cathode first. AS12Z and AS21Z are still valid for already existing types, BUT NOT FOR NEW DESIGN. Rev. 1.8, 03-Feb-16 Document Number: 81346 12 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLCS510., TLCR510., TLCO510., TLCY510., TLCYG510., TLCPG510. www.vishay.com Vishay Semiconductors TAPE DIMENSIONS in millimeters 2 1 9 0.5 12 0.3 18 +1 - 0.5 0.3 0.2 12.7 1 0.9 max. O 4 0.2 2.54 + 0.6 - 0.1 5.08 0.7 6.35 0.7 12.7 0.2 Measure limit over 20 index-holes: 1 Quantity per: Reel (Mat.-no. 1764) 1000 94 8172 Rev. 1.8, 03-Feb-16 Option Dim. "H" 0.5 mm AS 17.3 Document Number: 81346 13 For technical questions, contact: LED@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: TLCR5100 TLCY5100 TLCS5100 TLCYG5100 TLCPG5100 TLCO5100