Amphenol MS Modified ~~ Cylindrical Connectors 12-021-5 OO 0 0/ E O T XK Y AmphenolTable of Contents Page Introduction 20... ee ee ne eRe eee ee nent eee ee eee tebe teen eee ene enensetenee 1 MS Modified Connectors (Solder Type) FP3106 flange mounting plug ..........-. cece eee ee eee ence eee enee Me eee ee neta eee e eee eee eneees 2 *10-72008/40 wall mounting plug... 1.6... ec ce ete cence eet teen eet e ae ee eer eeteeeeeteneees 3 *10-72108/40 cable connecting plug .. 2.0... ee ee ce ce eee eee eee ee tee eee e tee ne eee neeteenees 4 *10-72608/40 straight plug . 2... 6c ee ne eee en ee eee cetera tet t eee eee nee tn eneetneeae 5 10-72808/40 90 degree plug .. 1... eee ete ne eee ene ete eee eee e nee 6 TBF thru-bulkhead receptacle ...... 2.2... ccc tee ee en eee te eee e eee eevee n ee eeeceeeenvenees 7 10-74108/28 (sealed) jam nut receptacle, 10-74708/40 (pressurized) jam nut receptacle ......... 0... ce eee eee eee 8 10-87308/40 (thin wall) jam nut receptacle ..... 20.0... ccc cee teen teen cence nee eeee et enneenes 9 10-87408/40 (back skirt) jam nut receptacle ..... 0.00. ccc cece ccc cece cece cece nee ce eenneeeeueeueeuseeeensnatnens 10 SCOOP (potting) wall mounting receptacle ....... 0... ce ee eee eee een etna teen teen teen teees 11 SCO1P (potting) cable connecting plug ....... 0... eee ce te ee ee eee cette eee nee eet att ettanes 12 SCO6P (potting) straight plug... 2. en ee ne en errno nee eee en eee rete ee 13 MS Modified Connectors (Crimp Type) 10-214008/40 wall mounting receptacle 2.0.0... eee ent ee cent eee eeenes 14 10-214108/40 cable connecting plug ......... ee nee eee eben ee ete nee enaee 15 10-214208/40 box mounting receptacle ...... 0... ee eee tee eee t cent teens 16 10-214608/40 straight plug... 2. ee ee een eee ne be ne nee e eee e tebe ee eee e eee eeaaes 17 10-214808/40 90 degree plug . 2.2.6 ccc ee en ene eee ene nee ee tent tte tenet een eeeeaes 18 10-214908/40 45 degree plUg .. 2... ce te ee ee eee enn ene eee en tte nena eee eeeeee 19 Accessories and application tools for 10-214XXX serieS ... cee ener e neta eee e teen enene 20 * NOTE: This shell style is available in the 10-109000 series, which provides a longer backshell for customers requiring additional stripping distance, and also utlizes grounding screws on the clamping nut. Should more information be required concerning the connectors covered in this publication, or if special application needs arise, please contact your nearest Amphenol sales office or Amphenol! Corporation at the following address: Amphenol Corporation Amphenol Aerospace 40-60 Delaware Avenue Sidney, New York 13838 Telephone: 607-563-5011 Fax: 607-563-5157 Amphenol Aerospace is an ISO 9001 Certified Manufacturer. i :Amphenol MS Modified Cylindrical Connectors The Amphenol MS Modified connector series has been estab- lished to supplement standard MS shell styles and provide a greater variety of styles for the electrical connector user. The MS and MS Modified series offer the same insert arrange- ments and electrical ratings as illustrated and tabulated in the Contacts and Arrangements section of Amphenol Catalog 12- 020. In addition, the MS Modified series is available with spe- cial arrangements, also shown in Catalog 12-020. Standard MS coupling threads and polarization are employed. Aluminum components are cadmium plated with either an olive drab chro- mate or clear chromate after treatment. Contacts are fabricated from high grade copper alloys and are generally silver plated. Size 16 and 12 socket contacts incorporate a closed entry design. Also offered as an MS Modified type is the 10-214XXX series connector (see pages 14 to 21). This versatile series utilizes insertable crimp type contacts, and is designed to accommo- date Navy controlled multi-conductor armored cable per MIL-C- 915 or MIL-C-2194. Contacts are silver plated with a 30/50 micro-inch gold overplate. Application tooling is fully coordi- nated and available with the 10-214XXX series. How to Order H the MS Modified connector desired is a 10-order number (for example, 10-720XX, page 3) use order information below. If the connector desired is not a 10-order number (for example, FP3106-XX, page 2) use the order information supplied on the bottom of the page covering that connector. FOR 10- ORDER NUMBERS (1) Select the desired base 10-order number. To this base number add desired contact arrangement from the Con- tacts and Arrangements section. Add P or S to specify pin or socket contacts. A complete order number for a 10- 72008/40 wall mounting receptacle in shell size 18 with an MS arrangement of 18-1 with pin contacts and with the insert in the normal position is: 10-72018-1P FOR ALTERNATE POSITIONING (2) When an aiternate position of the insert is required, this is indicated by adding another letter such as W to the ordering number listed in (1) above. When alternate insert location is desired, see alternate positioning page of Cata- log 12-020, and then select from the tables at right the one letter that indicates both the kind of contacts and the insert location you require. Add this letter to the order number. PIN CONTACTS SOCKET CONTACTS MS Amphenol MS Amphenol Letters Letter Letter Letter PW G SW H PX I SX J PY K SY L PZ M SZ N The order number for a 10-72008/40 wall mounting receptacle in shell size 18 with an MS arrangement of 18-1 with pin con- tacts and with the insert located in alternate position W would be: 10-72018-1G d kFP3106 flange mounting plug * For console type applications * Compatibility with MS receptacles Class A, general duty, specification MIL-C-5015 Class C, pressurized, specification MIL-C-5015 * Olive drab chromate over cadmium finish (also clear chromate available) For contact data see Catalog 12-020. All lockwire holes .045 Dia. Min. * Increase Z dimension, so marked (*), by .312 for size O contact only. HOW TO ORDER * To order, select base number (Class A or C) and shell size; Add insert arrangement from Contact and Arrangements section, Catalog 12-020. Add P for pins or S for sockets. Example: FP3106A-18-1P or FP3106C-18-1P. MS Order A ' Q T Shell Number** Thread J K L Dia. R s Thread z Size Class A or C Class 2B +.005 2.005 +.020 Max. +.005 +.020 Class 2B +045 8s FP3106-8S- -5000-28UNEF 531 125 438 732 -562 781 4-40NC 562 10S FP3106-10S- -6250-24NEF 531 125 -438 -844 -562 781 4-40NC -562 : OSL FP3106-10SL- .6250-24NEF 531 -126 438 946 -562 -781 4-40NC 562 12S FP3106-12S- -7500-20UNEF 531 -156 438 -987 812 1.062 4-40NC 562 12 FP3106-12- :7500-20UNEF 719 -156 -688 -987. 812 1.062 4-40NC 812 i 148 FP3106-14S- .8750-20UNEF 531 -156 438 4.114 812 1.062 4-40NC 562 : 14 FP3106-14- -8750-20UNEF 719 -156 688 1.114 812 1.062 4-40NC 812 16S FP3106-16S- 1.0000-20UNEF 531 -156 438 1.226 1.000 1.312 6-32NC -562 16 FP3106-16- 1.0000-20UNEF 719 156 688 1.226 1.000 1.312 6-32NC 812 18 FP3106-18- 1.1250-18NEF 719 -156 -687 1.353 1.000 1.312 6-32NC .812* 20 FP3106-20- 1.2500-18NEF -719 -188 -687 1.483 1.250 1.625 10-32NF .812* 22 FP3106-22- 1.3750-18NEF 719 -188 -687 1.608 1.250 1.625 10-32NF -812* 24 FP3%06-24- 1.5000-18NEF 719 -188 -687 1.735 1.562 2.000 10-32NF -812* 28 FP3106-28- 1.7500-18NS .719 -188 .687 1.971 1.562 2.000 10-32NF -812* 32 FP3106-32- 2.0000-18NS 719 .250 -781 2.228 1.812 2.500 10-32NF .812* 36 FP3106-36- 2.2500-16UN -719 -250 -781 2.483 1.812 2.500 10-32NF -812* 40 FP3106-40- 2.5000-16UN -719 -250 781 2.737 2.250 3.031 10-32NF -812*10-72008/40 wall mounting receptacle For multi-conductor cable Sealing gaskets at all mating surfaces Olive drab chromate over cadmium plate finish Axial compression type clamping nut provides strain relief and cable sealing NOTE: This shell style is available in the 10-109000 series which pro- vides a longer backshell for customers requiring additional strip- ping distance and aiso utilizes grounding screws on the clamping nut. A r For contact data see Catalog 12-020. All lockwire holes .045 Dia. Min. (adapter size 8 to 20 only). NOTE: Available as an accessory, the MS3420A sleeving is represented by HC & HF dimensions. Tabulation appears on page 6. MS A B Min. K M N T Dia. Zz Shell Order Thread Full EF Ec +.020 L +.010 Dia. R s +.004 +.050 Size Number Class 2A Thd. Free Closed ~.010 Max. -.000 Max. 2.005 +.020 -.002 -.060 8S 10-72008- .5000-28UNEF | .391 219 .027 672 2.179 -562 807 594 875 -120 422 10S 10-72010- -6250-24NEF 391 219 .027 672 2.202 -562 807 .719 1.000 -120 422 10SL| 10-72011- -6250-24NEF 391 312 .094 672 2.327 562 901 719 1.000 120 422 128 10-72012- -7500-20UNEF | .450 312 .094 672 2.202 562 901 812 1.094 -120 422 12 10-72013- -7500-20UNEF | .625 312 094 -860 2.577 -750 -901 812 1.094 120 672 148 10-72014- .8750-20UNEF | .450 438 .230 672 2.202 562 1.026 906 1.188 -120 422 14 10-72015- -8750-20UNEF | .625 438 230 -860 2.577 -750 1.026 906 1.188 -120 672 168 10-72016- | 1.0000-20UNEF | .450 531 |. .316 672 2.202 562 1.119 969 1.281 -120 422 16 10-72017- | 1.0000-20UNEF | .625 531 316 .860 2.577 -750 1.119 .969 1.281 -120 672 18 10-72018- | 1.1250-18NEF .625 625 378 891 2.604 -750 1.229 | 1.063 1.375 -120 -641* 20 10-72020- | 1.2500-18NEF 625 -750 -500 891 2.717 -750 1.479 | 1.156 1.500 -120 641* 22 10-72022- | 1.3750-18NEF 625 750 .500 891 2.727 -750 1.479 | 1.250 1.625 -120 .641* 24 10-72024- | 1.5000-18NEF 625 938 611 953 2.789 812 1.666 | 1.375 1.750 -147 -578* 28 10-72028- | 1.7500-18NS 625 .938 611 .953 3.007 812 1.666 1.562 2.000 147 578" 32 10-72032- | 2.0000-18NS 625 1.250 922 1.031 3.035 875 2.135 | 1.750 2.250 173 -500* 36 10-72036- | 2.2500-16UN 625 1.375 922 1.031 3.302 875 2.260 | 1.938 2.500 -173 -500* 40 10-72040- | 2.5000-16UN -625 1.625 1.180 1.031 3.302 875 2.510 | 2.188 2.750 173 .500* * Increase Z dimension, so marked (* ), by .312 for size O contact only.10-72108/40 cable connecting plug For multi-conductor cable * Sealing gaskets at all mating surfaces Olive drab chromate over cadmium plate finish Axial compression type clamping nut provides strain relief and cable sealing NOTE: This shell style is available in the 10-109000 series which pro- vides a longer backshell for customers requiring additional strip- ping distance and also utilizes grounding screws on the clamping nut. HCIHF < 4 i N ECIEF For contact data see Catalog 12-020. All lockwire holes .045 Dia. Min. (adapter size 8 to 20 only). NOTE: Available as an accessory, the MS3420A sleeving is represented by HC & HF dimensions. Tabulation appears on page 6. MS A N Shell Order Thread B Min. EF EC L Dia. Zz ' Size Number Class 2A Full Thd. Free Closed Max. Max. +.040 8S 10-72108- -5000-28UNEF 406 219 .027 2.179 807 1.094 10S 10-72110- -6250-24NEF 406 219 .027 2.202 -807 1.094 | 10SL 10-72111- .6250-24NEF 406 312 -094 2.327 901 1.094 | 128 10-72112- -7500-20UNEF _ 422 312 -094 2.202 -901 1.094 | 12 10-72113- .7500-20UNEF 656 312 .094 2.577 901 1.532 14S 10-72114- .8750-20UNEF 391 .438 .230 2.202 1.026 1.094 14 10-72115- .8750-20UNEF -625 438 .230 2.577 1.026 1,532 16S 10-72116- 1.0000-20UNEF 391 531 316 2.202 1.119 1.094 16 10-72117- 1.0000-20UNEF 625 531 316 2.577 1.119 1.532 18 10-72118- 1.1250-18NEF 625 -625 378 2.604 1.229 1.532* 20 10-72120- 1.2500-18NEF 625 -750 -500 2.717 1.479 1.532* 22 10-72122- 1.3750-18NEF 625 -750 -500 2.727 1.479 - 1.532* 24 10-72124- 1.5000-18NEF 625 938 611 2.789 1.666 1.532* 28 10-72128- 1.7500-18NS 625 938 611 3.007 1.666 1.532* 32 10-72132- 2.0000-18NS 625 1.250 -922 3.035 2.135 1.532* 36 10-72136- 2.2500-16UN 625 1.375 922 3.302 2.260 1.532* 40 10-72140- 2.5000-16UN 625 1.625 1.180 3.302 2.510 1.532* * Increase Z dimension, so marked (* ), by .312 for size 0 contact only.10-72608/40 straight plug e For multi-conductor cable * Sealing gaskets at all mating surfaces * Olive drab chromate over cadmium plate finish Axial compression type clamping nut provides strain relief and cable sealing NOTE: This shell style is available in the 10-109000 series which pro- vides a longer backshell for customers requiring additional strip- ping distance and also utilizes grounding screws on the clamping nut. L J Zz , = EF) EC } | __ > N | === Tl HF IHC For contact data see Catalog 12-020. All lockwire holes .045 Dia. Min. (adapter size 8 to 20 only). NOTE: Available as an accessory, the MS3420A sleeving is represented by HC & HF dimensions. Tabulation appears on page 6. MS A N Shell Order Thread EF Ec J L Dia. Q z Size Number Class 2B Free Closed +.005 Max. Max. Dia. 2.045 8S 10-72608- .5000-28UNEF 219 .027 531 1.648 -807 -750 -562 10S 10-72610- .6250-24NEF .219 .027 -531 1.671 .807 875 -562 10SL 10-7261 1- .6250-24NEF 312 -094 -531 1.785 -901 -946 562 12S 10-72612- -7500-20UNEF 312 .094 -531 1.671 -901 1.000" 562 12 10-72613- .7500-20UNEF 312 .094 719 1.858 901 1.000 812 14S 10-72614- .8750-20UNEF 438 .230 531 1.671 1.026 1.125 562 14 10-72615- .8750-20UNEF 438 .230 719 1.858 1.026 1.125 -812 16S 10-72616- 1.0000-20UNEF 531 -316 -531 1.671 1.119 1.250 562 16 10-72617- 1.0000-20UNEF 531 316 -719 1.858 1.119 1.250 812 18 10-72618- 1.1250-18NEF 625 378 719 1.885 1.229 1.344 -812* 20 10-72620- 1.2500-18NEF -750 445 719 1.998 1.479 1.469 812" 22 10-72622- 1.3750-18NEF -750 445 719 2.008 1.479 1.594 812" 24 10-72624- 1.5000-18NEF 938 611 719 2.071 1.666 1.719 812" 28 10-72628- 1.7500-18NS 938 611 719 2.289 1.666 1.969 812" 32 10-72632- 2.0000-18NS 1.250 .922 719 2.316 2.135 2.219 812* 36 10-72636- 2.2500-16UN 1.375 922 719 2.583 2.260 2.470 .812* 40 10-72640- 2.5000-16UN 1.625 1.180 -719 2.583 2.510 2.719 .812* * Increase Z dimension, so marked (* ), by .312 for size 0 contact only. : gE & t S10-72808/40 90 plug For multi-conductor cable * Sealing gaskets at all mating surfaces Olive drab chromate over cadmium plate finish Axial compression type clamping nut provides strain relief and cable sealing L J NOTE: This shell style is available in the / 10-109800 series and is similar to above, z Q except grounding screws are incorporated on the clamping nut. e SSS on ass (> = / =| | 7 ' = a LS! +l = ' HF HC EF For contact data see Catalog 12-020. EC All lockwire holes .045 Dia. Min. N NOTE: Available as an accessory, the MS3420A sleeving is repre- sented by HC & HF dimensions. Tabulation appears below. MS A N HC Shell Order Thread EF Ec J L Dia. Q U z MS Shell | Sleeve Order | HF Close Size Number Class 2B Free | Closed |} +.005 | Max. Max. Dia. Max. | +.045 Size Number Free d 8S | 10-72808- | .5000-28UNEF | .219| .027 | 561 | 927 | .807 | .750 | 1.550 | 562 | |8S&10S |MS3420-3A | 425 1 000 10S | 10-72810- | .6250-24NEF | .219| .027 | .531 | .927 | .607 | .875 | 1.550 | 562 | |10SL,12 |mSaa204a | 2191 .010 10SL | 10-72811- | .6250-24NEF 312| .094 | 531 | .951 | .901 | .946 | 1.613 | 562 & 128 12S | 10-72812- | .7500-20UNEF | .312| .094 | 531 | .956 | .901 | 1.000 | 1.613 | 562 14&14S |MS3420-4A | .219 | .020 12 | 10-72813- | .7500-20UNEF | 312] .094 | .719 | 1.143 | .901 | 1.000 | 1.613 | 812 MS3420-6A_| .312 | .114 148 | 10-72814- | .8750-20UNEF | .438| .230 | .531 | 1.020 | 1.026 | 1.125 | 1.675 | sea | |16&16S Mecasyen 312 | .085 14 | 10-72815- | .8750-20UNEF | .438| 230 | .719 | 1.207 | 1.026 | 1.125 | 1.675 | 812 S4208A_| 438 | 222 16S | 10-72816- | 1.0000-20UNEF | .531/ .316 | 531 [1.146 | 1.119 | 1.250 | 1.738 | 562 8 Meotoo na ore poe 16 10-72817- | 1.0000-20UNEF | 531! .316 | .719 | 1.333 | 1.119 | 1.250 | 1.738 | 812 20 & 22 |MS3400-8A | 438 1 377 18 10-72818- | 1.1250-18NEF 625 | .378 | .719 | 1.395 | 1.229 | 1.344 | 1.859 | .812* MS3420-12A | 541 | 270 20 10-72820- | 1.2500-18NEF 750 | .500 | .719 | 1.598 | 1.479 | 1.469 | 2.034 | .812| [Saao8 |MSa420-8A | 438 | 186 22 10-72822- | 1.3750-18NEF 750] 500 | .719 | 1.598 | 1.479 | 1.594 | 1.971 | .a12* MS3420-12A | .541 | .260 24 40-72824- | 1.5000-18NEF 938 | .611 | .719 | 1.786 | 1.666 | 1.719 | 2096 | 812" MS3420-16A | .750 | .433 28 10-72828- | 1.7500-18NS .938 | .611 | .719 | 1.786 | 1.666 | 1.969 | 2.159 | 812] 192 MS3420-12A | .541 | .273 MS3420-16A | .750 | .442 32 10-72832- | 2.0000-18NS 1.250 | .922 | .719 | 2.020 | 2.1385 | 2219 | 2.546 | 812 MS3420-20A | .938 | .620 36 10-72836- | 2.2500-16UN 1.375 | .922 | .719 | 2.145 | 2.260 | 2.470 | 2.766 | .812" - 36 MS3420-16A | .750 | .358 40 _| 10-72840- | 2.5000-16UN 1.625 | 1.180 | .719 | 2.270 | 2.510 | 2.719 | 2.922 | .812 MS3420-18A | .938 | .504 * Increase Z dimension, so marked (* ), by .312 for size 0 contact only. MS3420-24A | 1.125 | .682 40 MS3420-16A | .750 | .368 MS3420-20A | .938 | .514 MS3420-28A | 1.250 | .816TBF thru-bulkhead receptacle Pin and socket double-ended contacts Insert rotations viewed from socket end Olive drab chromate over cadmium plate finish For pressure tight feed-thru of circuits on bulkheads or panels L Ss R K M . bamesread [- os Groove Indicates | A Socket Side D LL T MS TSF A B D M Dia. Shell Order Thread Min. Full | Max. Panel K L +.000 R s +.004 Size Number* Class 2A Thread | Thickness Ref. 2.015 ~.010 +.005 +.020 ~.002 8s TBF-8S-XXPS .5000-28UNEF 406 .266 144 1.563 711 594 875 120 10S TBF-10S-XXPS .6250-24NEF 406 .266 141 1.563 711 .719 1.000 .120 128 TBF-12S-XXPS .7500-20UNEF 406 266 141 1.563 711 812 1.094 120 12 TBF-12-XXPS .7500-20UNEF 625 312 155 2.125 985 812 1.094 120 14S TBF-14S-XXPS .8750-20UNEF 406 .266 141 1.563 711 .906 1.188 .120 14 TBF-14-XXPS .8750-20UNEF 625 312 155 2.125 985 906 1.188 120 16S TBF-16S-XXPS 4.0000-20UNEF 406 266 144 1.563 714 969 1.281 .120 16 TBF-16-XXPS 4.0000-20UNEF 625 B12 155 2.125 .985 969 1.281 120 18 TBF-18-XXPS 4.1250-18NEF 625 312 155 2.125 985 1.062 1.375 120 20 TBF-20-XXPS 1.2500-18NEF 625 312 155 2.125 985 1.156 1.500 120 22 TBF-22-XXPS 4.3750-18NEF 625 312 155 2.125 985 1.250 4.625 120 24 TBF-24-XXPS 1.5000-18NEF 625 312 155 2.125 985 1.375 1.750 147 28 TBF-28-XXPS 1.7500-18NS 625 312 155 2.125 985 4.562 2.000 147 32 TBF-32-XXPS 2.0000-18NS 625 312 155 2.125 985 1.750 2.250 .173 36 TBF-36-XXPS 2.2500-16UN 625 312 .155 2.125 985 1.938 2.500 173 40 TBF-40-XXPS 2.5000-16UN 625 .312 155 2.125 985 2.188 2.750 173 HOW TO ORDER * To order, replace XX with insert arrangement from Contacts and Arrangements section of Catalog 12-020. For example: TBF-18-1PS. To order a rotation, an example part number would be: TBF-18-1PSW. 7 PACER ACFE REA 27 710-74108/28 (sealed) 10-74708/40 (pressurized) jam nut receptacle For open bench wiring of harness * O ring gasket provided on flange 10-741XX provides less than 1.3 x 10% cubic foot/hour air leakage at 15 psi differential * 10-747XX provides less than 1 cu. in/hour air leakage at 35 psi differential Clear chromate over cadmium plate finish M s z EF iH IK p i 7 Oo , /) 7 a /P s MS -+- -- ! =} 0 - = A | For contact data see Catalog 12-020. All lockwire holes .045 Dia. Min. Order Order H - MS Number** Number** A F Panel Shell 10-741XX 10-747XX Thread Hex |__Thickness K M P s z Size (Sealed) (Pressurized) Class 2A #.016 | Min. | Max. | #005 | 2.010 | 2.010 | +010 | +045 8S 10-74108- 10-74708- .5000-28UNEF 688 | .094 | 267 | 156 | .812| .309] 875) 2ei 108 10-74110- 10-74710- .6250-24NEF 812] 094 | 267 | 156 | 8127 .354] 1.000] 28] 10SL 10-74111- 10-74711- .6250-24NEF 812 | .094 | 267 | 156 | 812] .3541 1.000] 281 128 10-74112- 10-74712- .7500-20UNEF 938 | .094 | 267 | 156 | 812] (3971 1.125] 281 12 10-74113- 10-74713- .7500-20UNEF 938 | .094 | 302 | 156 | 1.1881 .397] 1.2251 344 148 10-74114- 10-74714- .8750-20UNEF 1.062 | .094 | 2004 | 156 | .812[ .442| 1.250] 281 14 10-74115- 10-74715- .8750-20UNEF 1.062 | .094 | .329 | 156 | 1.188] .442! 1.2501 aaa 16S 10-74116- 10-74716- 1,.0000-20UNEF | 1.250/ .094 | .204 | 156 | .812| .486| 1.9751 281 16 10-74117- 10-74717- 1.0000-20UNEF | 1.250} .094 | 329 | 156 | 1.188| 486| 1.975] 344 18 - 10-74118- 10-74718- 1.1250-18NEF 1.312 | .094 | .207 | .188 | 1.156] .575| 1.6051 375" 20 10-74120- 10-74720- 1.2500-18NEF 1.500 | .094 | .297 | 188 | 1.156/ .619| 1.750] .375* 22 10-74120- 10-74722- 1.3750-18NEF 1.562 | .094 | .297 | .188 | 1.156/[ .633| 1.875 | .a75" 24 10-74124- 10-74724- 1.5000-18NEF 1.750 | .094 | 360 | .188 | 1.2191 .7o7| 2.0001 312" 28 10-74128- 10-74728- 1.7500-18NS 2.000 | .094 | .360 | 188 | 1.219] .795| 22501 312" 32 10-74732 2.0000-18NS 2.188 | .094 | .392 | 219 | 1.250] .8a4/ 2.5001 281" 36 10-74736- 2.2500-16UN 2.438 | .094 | .329 | 219 | 1.250! .972| 27501 Bar 40 10-74740- 2.5000-16UN 2.812| .094 | .329 | 219 | 1.25017 1.060] 3.000) 281" * Increase Z dimension, so marked (*), by .312 for size 0 contact only. * To order O.D. chromate, change 10-prefix to 71-prefix.10-87308/40 _ jam nut receptacle * For thin wall or panels 0 ring gasket provided on flange * Olive drab chromate over cadmium piate finish ~}$- _ i SS J FL Ld A For contact data see Catalog 12-020. All lockwire holes .045 Dia. Min. : H MS A FE Panel Shell Order Thread Hex |__Thickness K M P s z Size Number Class 2A +.016 | Min. Max. | +.005 | +.010 | +.010 | +.010 | +045 8S 10-87308- .5000-28UNEF .688 | .000 204 -156 812 309 875 | .281 10S 10-87310- .6250-24NEF 812) .000 | .204 | .156 812 | 354) 1.000] .281 10SL 10-8731 1- .6250-24NEF 812 | .000 | .204 | .156 812 | .854| 1.000 | .281 128 40-87312- .7500-20UNEF 938 | .000 | .204 | .156 812 | .397| 1.125] .281 12 10-87313- .7500-20UNEF 938 {| .000 | .329 | .156 | 1.188 | .397| 1.125) 344 14S 10-87314- .8750-20UNEF 4.062 | .000 | .142 | .156 812 | 442) 1.250 | .281 14 10-87315- .8750-20UNEF 1.062 | .000 | 267 | .156 | 1.188} .442} 1.250{ .344 16S 10-87316- 1.0000-20UNEF 1.250} .000 | .142 | .156 812) 486} 1.875 | .281 16 10-87317- 1.0000-20UNEF 1.250 | .000 | 267 | .156 | 1.188] .486| 1.375 | .344 18 10-87318- 1.1250-18NEF 1.312| .000 | .235 | .188 | 1.156| 575 | 1.625] .375" 20 10-87320- 1.2500-18NEF 7.500 | .000 | .235 | .188 | 1.156] .619| 1.750 | .375* 22 10-87322- 1.3750-1 8NEF 1.562 / .000 | .285 | .188 | 1.156] .663} 1.875 | .375* 24 10-87324- 1.5000-18NEF 1.750 | .000 | .298 | .188 | 1.219| .707 | 2.000| .312* 28 10-87328- 1.7500-18NS 2.000 | .000 298 -188 1.219 .795 | 2.250 | .312" 32 10-87332- 2.0000-18NS 2.188] .000 | 329 | .219 | 1.250} .884| 2.500 | .281* 36 10-87336- 2.2500-16UN 2.438 | .000 | 298 | .219 | 1.250] .972| 2.750] .281* 40 10-87340- 2.5000-16UN 2.812/ .000 | .298 | .219 | 1.250] 1.060 | 3.000 | .281* * Increase Z dimension, so marked (* ), by .312 for size O contact only.10-87408/40 jam nut receptacle For thin wall or panels O ring gasket provided on flange Back skirt with threads for accessories Olive drab chromate over cadmium plate finish For contact data see Catalog 12-020. All lockwire holes .045 Dia. Min. Insert arrangements containing size 0, 4 and 8 contacts are not available. H + MS A F Panel v Shell Order Thread Hex G Thickness K M P s Thread z Size | Number Class 2A .016 2.015 Min. Max. ; +.005 | +.010 | +.010 | +.010 Class 2A +.045 10S 10-87410- .6250-24NEF 812 | 525 | .000 | .197 | .125 | .806| .3541| 1.000! .S000-28UNEF 288 10SL: 10-87411- .6250-24NEF 812 | 525 | .000 | .197 {| .125 | .806| .354| 1.000{ .6250-24NEF 288 128 10-87412- .7500-20UNEF 938 | .525 | .000 | .197 | 125 | .806| .a97 | 1.124) .6250-D4NEF 288 12 10-87413- .7500-20UNEF 938 | .713 | .000 | .197 | 125 | 1.055| .397/ 1.124| .6250-24NEF AT7 14S 10-87414- .8750-20UNEF 1.062 | 525 | .000 | .199 | .125 | .se9 | .442/ 1.150! -7500-20UNEF 225 14 10-87415- .8750-20UNEF 1.062 | .713 | 000 | .134 | .125 [| 1.055/ 4421 1.2501 .7500-20UNEF 477 16S 10-87416- 1.0000-20UNEF 1.250 | .525 | .000 | .199 | .125 | s6e9 | .486| 1.876| .8750-20UNEF 225 16 10-87417- 1.0000-20UNEF 1.250 | .713 | .000 | .134 | 125 | 1.055] .486| 1.376 | .8750-20UNEF AT7 18 10-87418- 1.1250-18NEF 1.312 | .729 | .000 | .134 | 156 | 1.055] .575| 1.625 | 1.0000-20UNEE AT? 20 10-87420- 1.2500-18NEF 1.500 | .729 | .000 [| .134 | 156 | 1.055/ .619| 1.7501 1.1250-18NEF AT7 22 10-87422- 1.3750-18NEF 1.562 | .729 | .000 | .134 [ .156 [| 1.055] .663| 1.875] 1.2500-18NEF 477 24 10-87424- 1.5000-18NEF 1.750 | .745 | ooo | .167 [| .172 | 1.088] .707 | 2.0001 1.3750-18NEF 443 28 10-87428- 1.7500-18NS 2.000 | .745 | .000 | .167 | .172 | 1.088] .795| 22501 1.6250-18NEE 443 32 10-87432- 2.0000-18NS 2.188 | .761 | .000 | .135 | .188 | 1.056| .884 | 25001 1.6750-16NEF A777 36 10-87436- 2.2500-16UN 2.438 | .761 |-.000 | .166 | 188 [1.118] .972 | 2.7501 2.0625-16N 414 40 10-87440- 2.5000-16UN 2.812 {| .761 | .000 | .166 | .188 | 1.118 | 1.0601 3.000| 23125-16N A414 10SCOOP _.. wall mounting receptacle Olive drab chromate over cadmium plate finish Primed inserts and potting boot provided for customer applied potting compounds s - - G f A R Ss For contact data see Catalog 12-020. NOTE: Size 0 contacts must be individually sleeved. Use vinyl tubing, or equivalent, of suitable length and diameter. N T MS A B K M Dia. Dia. Zz Shell Order Thread Min. Full G +.020 L +.010 +.010 R Ss +.004 +.050 Size Number** Class 2A Thd. Dia. ~.010 Max. .000 .000 +.005 +.031 -.002 060 8s SCOOP-8S- .5000-28UNEF .391 288 672 1.375 -562 516 594 .875 -120 422 10S SCOOP-10S- .6250-24NEF. 391 359 672 1.375 562 .609 719 1.000 -120 422 12S SCOOP-12S- -7500-20UNEF 450 484 672 1.375 562 .766 812 1.094 -120 422 12 SCOOP-12- .7500-20UNEF 625 484 -860 1.789 -750 -766 812 1.094 -120 672 14S SCOOP-14S- .8750-20UNEF -450 -609 672 1.375 562 844 906 1.188 -120 422 14 SCOOP-14- .8750-20UNEF -625 -609 .860 1.781 -750 844 -906 1.188 -120 672 16S SCOOP-16S-. 1.0000-20UNEF 450 734 .672 1.375 562 -969 .969 1.281 120 422 16 SCOOP-16- 1.0000-20UNEF 625 734 .860 1.781 -750 .969 969 1.281 .120 672 18 SCOOP-18- 1.1250-18NEF -625 .859 891 1.812 -750 4.094 4.063 1.375 -120 -641* 20 SCOOP-20- 1.2500-18NEF -625 -984 891 1.812 -750 1.219 1.156 1.500 -120 641" 22 SCOOP-22- 1.3750-18NEF 625 1.109 -891 1.812 -750 1.344 1.250 1.625 -120 .641* 24 SCOOP-24- 1.5000-18NEF -625 1.234 953 1.812 812 1.469 1.375 1.750 -147 578" 28 SCOOP-28- 1.7500-18NS 625 1.427 953 1.812 B12 1.719 1.562 2.000 .147 -578* 32 SCOOP-32- 2.0000-18NS 625 1.708 1.031 1.828 875 2.000 1.750 2.250 173 -500* 36 SCOOP-36- 2.2500-16UN -625 1.895 1.031 1.828 -875 2.219 1.938 2.500 173 500* 40 SCOOP-40- 2.5000-16UN 625 | 2.130 1.031 1.828 875 2.469 2.188 2.750 .173 500 * Increase Z dimension, so marked (*), by .312 for size 0 contact only. ar HOW TO ORDER ~ ** To order, select base number above; add insert arrangement from Contact and Arrangements section, Catalog 12-020; add P for pins or S for sockets. Example: SCOOP-18-1P 14 NOTE: Consult Amphenol, Sidney, NY for availability of shell size 10SL. 5 i & 5SCco1P cable connecting plug * Olive drab chromate over cadmium plate finish Primed inserts and potting boot provided for customer applied potting compounds For contact data see Catalog 12-020. NOTE: Size 0 contacts must be individually sleeved. Use vinyl tubing, or equivalent, of suitable length and diameter. N MS A B Dia. Shell Order Thread Min. Full G L +.010 z Size Number** Class 2A Thd. Dia. Max. ~.000 +.040 8S SCO1P-8S- -5000-28UNEF -406 .288 1.350 516 1.094 10S SCO1P-10S- .6250-24NEF .406 359 1.375 -609 1.094 10SL SCO1P-10SL- .6250-24NEF 406 484 1.351 -766 1.094 12S $C01P-12S- -7500-20UNEF 422 484 1.375 -766 1.094 12 SCO1P-12- -7500-20UNEF -656 484 1.827 -766 1.532 14S SCO1P-14S- -8750-20UNEF 391 .609 1.375 -844 1.094 14 SCO1P-14- -8750-20UNEF 625 .609 1.827 -844 1.532 16S SCO1P-16S- 1.0000-20UNEF 391 734 1.375 969 1.094 16 SCO1P-16- 1.0000-20UNEF 625 734 1.827 -969 1.532 18 SCO1P-18- 1.1250-18NEF -625 -859 1.827 1.094 1.532* 20 $CO1P-20- 1.2500-18NEF 625 984 1.827 1.219 1.532* 22 SC01P-22- 1.3750-18NEF 625 1.109 1.827 1.344 1.532* 24 SCO1P-24- 1.5000-18NEF -625 1.234 1.827 1.469 1.532* 28 SCO01P-28- 1.7500-18NS 625 1.427 1.827 1.719 1.532* 32 SCO1P-32- 2.0000-18NS 625 1.708 1.827 2.000 1.532" 36 SCO01P-36- 2.2500-16UN -625 1.895 1.827 2.219 1.532* 40 SC01P-40- 2.5000-16UN -625 2.180 1.827 2.469 1.532* * Increase Z dimension, so marked (* ), by .312 for size 0 contact only. HOW TO ORDER * To order, select base number above; add insert arrangement from Contact and Arrangements section, , Catalog 12-020; add P for pins or S for sockets. Example: SCO1P-18-1P 12EES DERMIS Ee Me SCO6P straight plug Olive drab chromate over cadmium plate finish e Primed inserts and potting boot provided for customer applied potting compounds ~ SPPWUORRORABIS I ee be For contact data see Catalog 12-020. NOTE: Size 0 contacts must be individually sleeved. Use vinyl tubing, or equivalent, of suitable length and diameter. MS A Dia. Q Shell Order Thread G J L +.010 Dia. zZ Size Number** Class 2B Dia. 2.005 Max. .000 Max. 2.045 8S SCO6P-8S- -5000-28UNEF 288 531 1.449 516 -760 562 10S SCO6P-10S- -6250-24NEF 359 531 1.449 -609 885 562 12S SCO6P-12S- -7500-20UNEF 484 531 1.449 -766 1.010 -562 7 12 SCO6P-12- .7500-20UNEF 484 719 1.901 766 1.010 812 : 148 SCO6P-14S- .8750-20UNEF 609 531 1.449 844 1.135 562 : 14 SCO6P-14- .8750-20UNEF .609 719 1.901 844 1.135 812 16S SCO6P-168- 1.0000-20UNEF 734 531 1.449 969 1.260 562 16 SCO6P-16- 1.0000-20UNEF 734 719 1.901 -969 1.260 812 18 SCO6P-18- 1.1250-18NEF 859 719 1.901 1.094 1.354 812" 20 SCO6P-20- 1.2500-18NEF 984 719 1.901 1.219 1.479 812* 22 SCO6P-22- 1.3750-18NEF 1.109 719 1.901 1.344 1.604 812" 24 SCO6P-24- 1.5000-18NEF 1.234 719 1.901 1.469 1.729 812" 28 SCO6P-28- 1.7500-18NS 1.427 719 1.901 1.719 1.979 812* 32 SCO6P-32- 2.0000-18NS 1.708 719 1.901 2.000 2.229 812" 36 SCO6P-36- 2.2500-16UN 1.895 719 1.901 2.219 2.479 812* 40 SCO6P-40- 2.5000-16UN 2.130 719 1.901 2.469 2.729 812" * Increase Z dimension, so marked (* ), by .312 for size O contact only. HOW TO ORDER ** To order, select base number above; add insert arrangement from Contact and Arrangements section, Catalog 12-020; add P for pins or S for sockets. Example: SCO6P-18-1P NOTE: Consult Amphenol, Sidney, NY for availability of shell size 13 10SL.10-214008/40 wall mounting receptacle oy Crimp contacts Multi-conductor jacket cable * Sealing gaskets at all mating surfaces Olive drab chromate over cadmium finish (o- TT |, Ges r JK eo ~& | a | .. Q) \ A B i : \ Lor 4 EHUTORTE UC EEE ETH je wy L HOLES D For contact data see Catalog 12-020. B L MS A Min. D E GF Gc Dia. z Shell Order Thread Full +.010 +.020 F Free Closed H J +.004 N +.050 Size Number Class 2A Thd. -000 | -.010 Max. Dia. Dia. Max. 2.005 K -.002 | +031 | -.060 8S 10-214008- -5000-28UNEF | .391 -562 672 3.005 .219 027 812 594 875 120 | 1.068 | .469 10S | 10-214010 .6250-24NEF 391 562 672 3.005 219 .027 812 -719 | 1.000 120 | 1.068 | .469 1OSL | 10-214011- .6250-24NEF 391 562 672 3.005 312 094 -906 719 | 1.000 -120 | 1.068 | .469 128 | 10-214012- -7500-20UNEF | .625 -562 672 3.005 312 094. 906 812 | 1.094 -120 | 1.068 | .469 12 10-214013- -7500-20UNEF {| .625 -750 .860 3.437 312 094 -906 812 | 1.094 -120 | 1.125 | .672 14S | 10-214014- -8750-20UNEF | .450 -562 672 3.005 438 230 | 1.031 906 | 1.188 .120 | 1.068 ; .469 14 10-214015- -8750-20UNEF | .625 -750 .860 3.437 438 230 1.031 906 | 1.188 .120 | 1.125 | .672 16S | 10-214016- | 1.0000-20UNEF | .450 562 672 3.005 531 316 |. 1.125 969 | 1.281 -120 | 1.068 | .469 16 10-214017- | 1.0000-20UNEF | .625 .750 | .860 3.437 -531 316 1.125 .969 | 1.281 120 | 1.125 | .672 18 10-214018- | 1.1250-18NEF 625 750 891 3.515 625 378 1.234 | 1.063 | 1.375 120 | 1.125 | .64% . 20 10-214020- | 1.2500-18NEF 625 -750 891 3.780 -750 445 1.484 | 1.156 | 1.500 120 | 1.375 | .641 ue 22 10-214022- | 1.3750-18NEF -625 -750 891 4.030 -750 445 | 1.484 | 1.250 | 1.625 -120 | 1.625 | .641 24 10-214024- | 1.5000-18NEF 625 812 953 4.452 938 611 1.671 1.375 | 1.750 -147 | 1.875 | .578 28 10-214028- | 1.7500-18NS 625 812 953 4.874 -938 611 1.671 1.562 | 2.000 -147 | 2.297 | .578 32 10-214032- | 2.0000-18NS -625 875 | 1.031 5.374 | 1.250 922 | 2.188 | 1.750 | 2.250 -173 | 2.547 | .500 36 10-214036- | 2.2500-16UN 625 875 | 1.031 5.827 | 1.375 922 | 2.344 | 1.938 | 2.500 -173 | 2.797 | .500 40 10-214040- | 2.5000-16UN -625 875 | 1.031 6.077 | 1.625 | 1.180 | 2.594 | 2.188 | 2.750 -173 | 3.047 | .500 44 10-214044- | 2.7500-16UN 625 875 | 1.031" | 6.500 | 1.875 | 1.427 | 2.812 | 2.375 | 3.000* | .173 | 3.563 | .750 * Noted dimensions have tolerance +.02010-214108/40 cable connecting plug Crimp contacts Multi-conductor jacket cable * Sealing gaskets at all mating surfaces Olive drab chromate over cadmium finish D Z EF : EC : : , _ = F NILE Om a B N For contact data see Catalog 12-020. MS A B EF EC Shell Order Thread Min. Full D Free Closed F N z Size Number Class 2A Thd Max. Dia. Dia. Max. +.031 +.040 8s 10-214108- -5000-28UNEF .406 3.005 219 .027 812 1.068 1.141 10S 10-214110- .6250-24NEF 406 3.005 .219 .027 812 1.068 1.141 10SL 10-214111- .6250-24NEF 406 3.005 312 -094 -906 1.068 1.141 12S 10-2144 12- -7500-20UNEF -422 3.005 312 -094 -906 1.068 1.141 12 10-2141413- .7500-20UNEF .656 3.437 3312 .094 906 1.125 1.532 148 10-214114- .8750-20UNEF 391 3.005 438 230 1.031 1.068 1.141 14 10-214115- -8750-20UNEF 625 3.437 438 230 1.031 1.125 1.532 16S 10-214116- 1.000-20UNEF 391 3.005 531 316 1.125 1.068 1.141 16 10-214117- 1,0000-20UNEF -625 3.437 531 316 4.125 1.125 1.532 18 10-214118- 1.1250-18NEF 625 3.515 625 378 1.234 4.125 1.532 20 40-214120- 1.2500-18NEF 625 3.780 -750 445 1.484 1.375 1.532 22 10-214122- 1.3750-18NEF -625 4,030 -750 445 1.484 1.625 1.532 24 10-214124- 1.5000-18NEF 625 4.452 -938 611 1.671 1.875 1.532 28 10-214128- 1.7500-18NS 625 4.874 938 611 1.671 2.297 1.532 32 10-214132- 2.0000-18NS -625 5.374 1.250 922 2.188 2.547 1.532 36 10-214136- 2.2500-16UN 625 5.827 1.375 922 2.344 2.797 1.532 40 10-214140- 2.5000-16UN 625 6.077 1.625 1.180 2.594 3.047 1.532 44 10-214144- 2.7500-16UN 625 6.625 1.875 1.427 2.763 3.563 1.782 1510-214208/40 box mounting receptacle ) oO Crimp contacts Olive drab chromate over cadmium finish L / 4 HOLES B e aN n ; WY : + + J K S H ma <a e }-+2 i J D K E G F A For contact data see Catalog 12-020. ' . H L MS A B D E F G Dia. ; Dia. Shell Order +.050 Thread Min. Full +.010 +.020 +.000 +.010 J +.004 Size Number ~.060 Class 2A Thd. -.000 -.010 -.010 -.000 +.005 K .002 8S 10-214208- 469 -5000-28UNEF 391 562 672 297 375 594 875 -120 10S 10-214210- 469 .6250-24NEF 391 -562 672 .297 -500 719 1.000 -120 10SL 10-214211- .469 -6250-24NEF 391 562 672 297 625 719 1.000 -120 128 10-214212- .469 -7500-20UNEF .450 562 672 297 625 812 1.094 -120 12 10-214213- .672 -7500-20UNEF 625 -| .750 860 484 625 812 1.094 120 14S 10-214214- 469 -8750-20UNEF 450 562 672 .297 -750 906 1.188 -120 14 10-214215- 672 .8750-20UNEF .625 -750 -860 484 -750 906 1.188 -120 16S 10-214216- .469 1.0000-20UNEF 450 -562 672 297 875 969 1.281 -120 ; 16 10-214217- .672 1.0000-20UNEF -625 750 -860 484 875 969 1.281 -120 18 10-214218- 641 1.1250-18NEF 625 750 891 453 1.000 1.063 1.375 -120 20 10-214220- 641 1.2500-18NEF 625 750 891 453 1.125 1.156 1.500 120 . 22 10-214222- 641 1.3750-18NEF 625 750 891 453 1.250 1.250 1.625 -120 24 10-214224- 578 1.5000-18NEF -625 812 953 453 1.375 1.375 1.750 147 28 10-214228- 578 1.7500-18NS 625 812 -953 453 1.625 1.562 2.000 147 32 10-214232- -500 2.0000-18NS -625 875 1.031 438 1.875 1.750 2.250 173 36 10-214236- 500 2.2500-16UN 625 875 1.031 438 2.062 1.938 2.500 173 40 10-214240- 500 2.5000-16UN 625 875 1.031 438 2.312 2.188 2.750 173 . 4 10-214244- 718 2.7500-16UN 625 875 1.063 546 2.594 2.375 3.000 173 : 1610-214608/40 straight plug Crimp contacts Multi-conductor jacket cable Sealing gaskets at all mating surfaces Olive drab chromate over cadmium finish L J Zz BC A | fs T= F - = | @ We LN For contact data see Catalog 12-020. MS A BF BC Q Sheil Order Thread Free Closed F J L N Dia. z Size Number Class 2B Dia. Dia. Max. +.005 Max. +.031 Max. 2.045 8S 10-214608- .5000-28UNEF .219 .027 812 531 2.474 1.068 744 609 10S 10-214610- .6250-24NEF 219 .027 -812 531 2.474 1.068 869 -609 10SL 10-214611- .6250-24NEF 312 .094 -906 531 2.474 1.068 946 -609 128 10-214612- .7500-20UNEF 312 094 -906 531 2.474 1.068 -995 .609 12 10-214613- -7500-20UNEF 312 .094 .906 719 2.718 1.125 -995 812 14S 10-214614- -8750-20UNEF 438 .230 1.031 531 2.474 1.068 1.123 -609 14 10-214615- .8750-20UNEF 438 230 1.031 719 2.718 1.125 1.123 812 16S 10-214616- 1.000-20UNEF 531 316 1.125 531 2.474 1.068 1.250 609 16 10-214617- 1.0000-20UNEF 531 316 1.125 719 2.718 1.125 1.250 812 18 10-214618- 1.1250-18NEF 625 378 1.234 719 2.797 1.125 1.333 812 20 10-214620- 1.2500-18NEF -750 445 1.484 719 3.061 1.375 1.461 812 22 10-214622- 1.3750-18NEF -750 445 1.484 719 3.311 1.625 1.588 812 24 10-214624- 1.5000-18NEF 938 611 1.671 719 3.734 1.875 1.715 812 28 10-214628- 1.7500-18NS 938 611 1.671 719 4.156 2.297 1.968 812 32 10-214632- 2.0000-18NS 1.250 -922 2.188 719 4.655 2.547 2.209 -812 36 10-214636- 2.2500-16UN 1.375 922 2.344 719 5.108 2.797 2.463 812 40 10-214640- 2.5000-16UN . 1.625 1.180 2.594 719 5.358 3.047 2.718 812 44 10-214644- 2.7500-16UN 1.875 1.427 2.812 719 5.875 3.563 3.084 1.063 1710-214808/40 90 plug Crimp contacts Multi-conductor jacket cable Sealing gaskets at all mating surfaces Olive drab chromate over cadmium finish : ; i ' i i i For contact data see Catalog 12-020. MS A EF EC H Shell Order Thread B D Free Closed F Dia. J Zz Size Number Class 2B Max. Max. Dia. Dia. Max. Max. +.005 .045 8s 10-214808- .5000-28UNEF .927 1.729 .219 027 812 741 531 .609 10S 10-214810- .6250-24NEF -927 1.729 219 .027 812 .869 -531 -609 10SL 10-214811- .6250-24NEF -976 1.792 312 .094 -906 946 531 .609 12S 10-214812- .7500-20UNEF -956 1.792 312 .094 -906 -995 -531 -609 12 10-214813- -7500-20UNEF 1.143 1.792 312 -094 806 995 719 812 14S 10-214814- .8750-20UNEF 1.020 1.854 438 230 1.031 1.123 531 609 14 10-214815- .8750-20UNEF 1.207 1.854 438 .230 1.031 1.123 -719 812 16S 10-214816- 1.000-20UNEF 1.146 1.917 531 316 1.125 1.250 531 -609 16 10-214817- 1.0000-20UNEF 1.333 1.917 531 316 1.125 1.250 719 812 18 10-214818- 1.1250-18NEF 1.395 2.090 625 378 1.234 1.333 .719 -812 20 10-214820- 1.2500-18NEF 1.598 2.166 -750 445 1.484 1.461 719 812 22 10-214822- 1.3750-18NEF 1.629 2.228 -750 445 1.484 1.588 719 812 + 24 10-214824- 1.5000-18NEF 1.786 2.463 -938 611 1.671 1.715 .719 812 28 10-214828- 1.7500-18NS 1.786 2.526 938 611 1.671 1.968 .719 812 32 10-214832- 2.0000-18NS 2.020 3.026 1.250 922 2.188 2.209 719 812 ' 36 10-214836- 2.2500-16UN 2.150 3.291 1.375 -922 2.344 2.463 719 812 40 10-214840- 2.5000-16UN 2.270 3.447 1.625 1.180 2.594 2.718 719 812 44 10-214844- 2.7500-16UN 2.770 5.196 1.875 1.427 2.812 3.084 719 1.063 18Accessories and Application Tools _10-214XXX series Accessories CLAMP ADAPTER 90 ASSEMBLY ASSEMBLY ASSEMBLY Clamp Adapter 90 Elbow Shell Assembly Assembly Assembly Size Order Number Order Number Order Number 8S 10-350349-103 10-101393-83 10-36055-83 10S 10-350349-103 10-101393-103 10-36055-103 10SL 10-350349-123 10-101393-123 10-36055-123 128 10-350349-123 40-101393-123 10-36055-123 12 10-350349-123 10-101393-133 10-36055-133 44S 10-350349-143 10-101393-143 10-36055-143 14 10-350349-143 10-101393-153 10-36055-153 16S 10-350349-163 10-101393-163 10-36055-163 16 10-350349-163 10-101393-173 10-36055-173 18 10-350349-183 10-101393-183 10-36055-183 20 10-350349-203 10-329290-203 10-36055-203 22 10-350349-203 10-329290-223 10-36055-223 24 10-350349-243 10-329290-243 10-36055-243 28 10-350349-243 10-329290-283 10-36055-283 32 10-350349-323 10-329290-323 10-36055-323 36 10-350349-363 10-329290-363 10-36055-363 40 10-350349-403 10-329290-403 10-36055-403 44 10-350349-443 10-329290-443 10-248975-443 NOTE: The MS3420 sleeve and 10-40450 flange gasket are also available as accessories, but are not incl uded as part of the 10-214XXX assembly. See sleeve tabulation on page 6. See Catalog 12-020 for data on sleeve or gasket. Application Tools 1 ct aceon eit ee Lee |e ee tacts incorporated in 10-214XXX series connectors. M22820/1-01 : 16__| Pin & Socket | 11-73" 11-8250 Kit There is a ibility that crimping tools other than M22520/1-01 * 12 Pin & Socket | 11-7082 1 1-8250 Kit possibility that crimping too's , * * 8 | Pin& Socket | 11-8220 | 11-8250 Kit those listed here are, or in the future will be, avail- = = - - able for this specific application. 4 | Pin & Socket | 11-7865-4T SO ep + Complete i i idi liable crimped Complete instructions for roving reliable imped J =]=- 9 Prasat [ T7RHEST | Pa FLITE Socket 11-7674-3+ in the 10-214XXX series connector are available in ~, publication L-757. * Use Daniels Turret TH29-1 or Astro Tool Co. Turret 616266. : ** For appropriate crimp tool and positioner refer to Pico Crimping Tool Co. + Indicates tools used with Arbor Press 11-7364. 19