2.0x1.25mm SMD CHIP LED LAMP Part Number: KPHCM-2012EC-T PRELIMINARY SPEC HIGH EFFICIENCY RED Description Features z2.0X1.25mm zLOW SMT LED,0.5mm MAX.THICKNESS. zWIDE zIDEAL Orange Light Emitting Diode. VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE : 2000PCS / REEL. zMOISTURE zRoHS The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide POWER CONSUMPTION. SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAE4335 REV NO: V.4 DATE: MAR/07/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 1 OF 4 Selection Guide Dice Part No. KPHCM-2012EC-T Iv (mcd) [2] @ 20mA Lens Type HIGH EFFICIENCY RED(GaAsP/GaP) WATER CLEAR Viewing Angle [1] Min. Typ. 21/2 7 20 110 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength High Efficiency Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAE4335 REV NO: V.4 DATE: MAR/07/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 2 OF 4 High Efficiency Red KPHCM-2012EC-T SPEC NO: DSAE4335 REV NO: V.4 DATE: MAR/07/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 3 OF 4 KPHCM-2012EC-T Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAE4335 REV NO: V.4 DATE: MAR/07/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 4 OF 4