L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of LITE-ON Only FEATURES * Current transfer ratio ( CTR : MIN. 50% at IF = 5mA, VCE = 5V ) May.2009 * High input-output isolation voltage ( Viso = 3,750Vrms ) * High collector-emitter voltage ( VCEO = 80V ) * Employs double transfer mold technology * Subminiature type ( The volume is smaller than that of conventional DIP type by as far as 30% ) * Mini-flat package : 2.0mm profile : LTV-356T * Safety approval UL, CSA, FIMKO NEMKO, DEMKO, SEMKO, VDE* approved (*Requires "V" ordering option) * RoHS compliance APPLICATIONS * Hybrid substrates that require high density mounting. * Programmable controllers * System appliance, measuring instruments Part No. : LTV-356T Series BNS-OD-C131/A4 Page : 1 of 11 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of LITE-ON Only OUTLINE DIMENSIONS LTV-356T : *1. *2. *3. *4. 2-digit date code. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Rank shall be or shall not be marked. VDE 0884 Identification. Part No. : LTV-356T Series BNS-OD-C131/A4 Page : 2 of 11 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of LITE-ON Only TAPING DIMENSIONS Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Part No. : LTV-356T Series BNS-OD-C131/A4 Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 12 0.3 ( .47 ) 4 0.1 ( .15 ) 5.5 0.1 ( .217 ) 2 0.1 ( .079 ) 8 0.1 ( .315 ) Page : 3 of 11 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of LITE-ON Only ABSOLUTE MAXIMUM RATING ( Ta = 25C ) PARAMETER SYMBOL RATING UNIT Forward Current IF 50 mA Reverse Voltage VR 6 V Power Dissipation P 70 mW Collector - Emitter Voltage VCEO 80 V Emitter - Collector Voltage VECO 6 V Collector Current IC 50 mA Collector Power Dissipation PC 150 mW Ptot 170 mW Viso 3,750 Vrms Operating Temperature Topr -55 ~ +110 C Storage Temperature Tstg -55 ~ +150 C Tsol 260 C Tj 125 C INPUT OUTPUT Total Power Dissipation *1 Isolation Voltage *2 Soldering Temperature Junction Temperature *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : LTV-356T Series BNS-OD-C131/A4 Page : 4 of 11 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of LITE-ON Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25C ) PARAMETER INPUT OUTPUT *1 CTR = CONDITIONS Forward Voltage VF -- 1.2 1.4 V IF=20mA Reverse Current IR -- -- 10 A VR=4V Terminal Capacitance Ct -- 30 250 pF V=0, f=1KHz Collector Dark Current ICEO -- -- 100 nA VCE=20V, IF=0 Collector-Emitter Breakdown Voltage BVCEO 80 -- -- V IC=0.1mA IF=0 Emitter-Collector Breakdown Voltage BVECO 6 -- -- V IE=10A IF=0 IC 2.5 -- 30 mA *1 Current Transfer Ratio CTR 50 -- 600 % Collector-Emitter Saturation Voltage VCE(sat) -- -- 0.2 V IF=20mA IC=1mA Isolation Resistance Riso -- DC500V 40 ~ 60% R.H. Floating Capacitance Cf -- 0.6 1 pF V=0, f=1MHz Response Time (Rise) tr -- 4 18 s Response Time (Fall) tf -- 3 18 s Collector Current TRANSFER CHARACTERISTICS SYMBOL MIN. TYP. MAX. UNIT 5x1010 1x1011 IF=5mA VCE=5V VCE=2V, IC=2mA RL=100 IC x 100% IF Part No. : LTV-356T Series BNS-OD-C131/A4 Page : 5 of 11 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of LITE-ON Only RANK TABLE OF CURRENT TRANSFER RATIO CTR MODEL NO. LTV-356T RANK MARK CTR ( % ) A 80 ~ 160 B 130 ~ 260 C 200 ~ 400 D 300 ~ 600 A or B or C or D or No mark 50 ~ 600 IF = 5 mA CONDITIONS VCE = 5 V Ta = 25 C Part No. : LTV-356T Series BNS-OD-C131/A4 Page : 6 of 11 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of LITE-ON Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature Fig.2 Collector Power Dissipation vs. Ambient Temperature Collector power dissipation Pc (mW) 60 Forward current IF(mA) 50 40 30 20 10 0 -55 0 25 50 75 100 200 150 100 50 0 -55 125 0 o 7mA 125 o 4 3 2 Ta= 75 C 50 C o 200 o 25 C 0C -25 C o 100 o 50 20 10 5 1 2 1 0 5 15 10 0 0.5 Forward current IF(mA) 1.0 1.5 2.0 2.5 3.0 Forward voltage VF(V) Fig.5 Current Transfer Ratio vs. Forward Current Fig.6 Collector Current vs. Collector-emitter Voltage 200 50 VCE= 5V Ta= 25 C 180 IF= 30mA 160 140 120 100 80 60 40 o Ta= 25 C 25mA o Collector current Ic (mA) Current transfer ratio CTR (%) 100 500 O Ta= 25 C 0 40 20mA 30 15mA Pc(MAX.) 20 10mA 10 5mA 20 0 0 1 2 5 10 20 Forward current IF(mA) Part No. : LTV-356T Series BNS-OD-C131/A4 75 Fig.4 Forward Current vs. Forward Voltage Forward current IF(mA) 1mA 3mA 5mA Ic= 0.5mA Collecotr-emitter saturation voltage VCE (sat) (V) 5 50 Ambient temperature Ta ( C) Fig.3 Collector-emitter Saturation Voltage vs. Forward Current 6 25 o Ambient temperature Ta ( C) 50 0 1 2 3 4 5 6 7 8 9 Collector-emitter voltage VCE(V) Page : 7 of 11 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of LITE-ON Only CHARACTERISTICS CURVES Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature Fig.8 Collector-emitter Saturation Voltage vs. Ambient Temperature 0.10 IF= 1mA, VCE= 5V 100 50 Collector-emitter saturation voltage VCE (sat) (V) Relative current transfer ratio (%) 150 IF= 20mA IC= 1mA 0.08 0.06 0.04 0.02 0 0 20 20 40 60 80 100 120 40 60 80 100 120 o Ambient temperature Ta ( C) o Ambient temperature Ta ( C) Fig.9 Collector Dark Current vs. Ambient Temperature Collector dark current ICEO (nA) 10000 Fig.10 Response Time vs. Load Resistance 500 VCE= 20V Response time ( s) 1000 100 10 200 100 VCE= 2V IC= 2mA Ta= 25 C o 50 tr 20 10 td tf 5 ts 2 1 0.5 1 20 40 60 80 100 0.2 0.05 120 o 0.1 0.2 1 2 5 Vcc VCE= 2V IC= 2mA Ta= 25 C o 0 Input RD RL Input Output Output 10% 90% ts td 100 10 RL= 10k 10 Test Circuit for Response Time Fig.11 Frequency Response Voltage gain Av (dB) 0.5 Load resistance RL (k ) Ambient temperature Ta ( C) 1k tr tf Test Circuit for Frequency Response Vcc 20 0.5 1 RD 2 5 10 20 50 100 RL Output 500 Frequency f (kHz) Part No. : LTV-356T Series BNS-OD-C131/A4 Page : 8 of 11 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of LITE-ON Only TEMPERATURE PROFILE OF SOLDERING REFLOW (1) One time soldering reflow is recommended within the condition of temperature and time profile shown below. Part No. : LTV-356T Series BNS-OD-C131/A4 Page : 9 of 11 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of LITE-ON Only TEMPERATURE PROFILE OF SOLDERING REFLOW (2) When using another soldering method such as infrated ray lamp, the temperature may rise partially in the mold of the device. Keep the temperature on the package of the device within the condition of above (1) RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : LTV-356T Series BNS-OD-C131/A4 Page : 10 of 11 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of LITE-ON Only Notes: - Lite-On is continually improving the quality, reliability, function or design and Lite-On reserves the right to make changes without further notices. - The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation. - For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives. - When requiring a device for any "specific" application, please contact our sales in advice. - If there are any questions about the contents of this publication, please contact us at your convenience. - The contents described herein are subject to change without prior notice. - Do not immerse unit's body in solder paste. Part No. : LTV-356T Series BNS-OD-C131/A4 Page : 11 of 11