5.7" HG2G Basic OI Touchscreens NEW 5.7" TFT Color LCD OI Touchscreen * 256 Color * Operating Voltage: 12-24 VDC * Super Bright LCD Screen: 400 cd/m2 * USB mini B port * Approvals: UL508, CSA C22.2 No.142 * Built-in Ethernet Port (optional) * RS232,RS485, and RS422 Compatible * Analog Touch Panel * Power LED Indicator * Supports IDEC and other brand PLC Manufacturers New Models 5.7" STN Mono LCD OI Touchscreen * 15 level Monochrome * Operating Voltage: 12 or 24 VDC * Super Bright LCD Screen: 500 cd/m2 * Approvals: UL508, UL1604, CSA C22.2 No.142 / No. 213 * Built-in Ethernet Port (optional) * RS232,RS485, and RS422 Compatible * Analog Touch Panel * Power LED Indicator * Supports IDEC and other brand PLC Manufacturers Specifications General Specifications Model Display Specifications HG2G-SB (monochrome) Model HG2G-5S (color) HG2G-SB (monochrome) Rated Power Voltage HG2G-5S (color) 12V-24VDC 24V DC 12V DC Display Color TFT Color LCD STN monochrome LCD Power Voltage Range 10.2 to 28.8V DC 20.4 to 28.8V DC 10.2 to 18.0V DC Color/Shade 256 colors Power Consumption 8W maximum Allowable Momentary Power Interruption 10W maximum Inrush Current 40A maximum Dielectric Strength 1,000V AC, 10 mA, 1 minute between power and FG terminals Insulation Resistance 40A maximum 50 M minimum between power and FG terminals (500 V DC megger) Operating Temperature 0 to +50C (no freezing) Operating Humidity 10 to 90% RH (no condensation) Storage Temperature -20 to +60C (no freezing) Storage Humidity 10 to 90% RH (no condensation) Pollution Degree Vibration Resistance Shock Resistance Noise Immunity Electrostatic Discharge 2 5 to 8.4 Hz amplitude 3.5 mm, 8.4 to 150 Hz, acceleration 9.8 m/s2 10 cycles (100 minutes) on each of three mutually perpendicular axes 147 m/s2, 11 ms 5 shocks on each of three mutually perpendicular axes Fast transient/burst test, Power terminals: 2 kV, Communication line: 1 kV (IEC/EN61000-4-4) Corrosion Immunity Free from corrosive gases Degree of Protection *1 Dimensions Weight (approx.) IP65 (IEC 60529) (front part when mounted), Type 13 167.2W x134.7H x40.9D mm 0.5 kg *1 Protection degree of the front surface after proper moutning on adequate panel. Right and left 70, up 70, down 60 Contrast Adjustment Backlight Backlight Life *2 Backlight Control Adjustable from the front of the panel LED CCFL 50,000 hours minimum 75,000 hours minimum Configurable: Always on or Auto Shut off 400 cd/m2 Brightness *3 Brightness Adjustment 500 cd/m2 32 scales *2 The backlight life refers to the time until the surface brightness reduces by half after continuous use at 25C. *3 Brightness of the LCD only. Function Specifications Screen Types Base screen, sub screen, system screen No. of Screens Base screen: 3,000 max. Sub screen: 3,015 max. User Memory 2 MB (including expansion fonts) Parts Bit Button, Word Button, Goto Screen, Key Button, Multi Button, Keypad, Selector Switch, Potentiometer, Numerical Input, Character Input, Pilot Lamp, Multi-State Lamp, Picture Display, Message Display, Message Switching Display, Alarm List Display, Alarm Log Display, Numerical Display, Bar Graph, Trend Chart, Pie Chart, Meter, Calendar, Bit Write Command, Word Write Command, Goto Screen Command, Screen Script Command, Multi Command,Timer Calendar *4 Year, Month, Day, Hour, Min., Sec., Day of Week, 60 sec per month (at 25 C) Power Failure Backup Data *4 Calendar, log data, keep internal relay, keep internal register Battery Life *4 4 years (at 25C) (1-year warranty) Panel mounting IP66 (IEC 60529) (front part when mounted) 320W x 240H pixels View Angle ESD-3 (RH-1) Level 3 (Contact 6 kV, air 8 kV) (IEC/EN61000-4-2) Mounting 15 shades 115.2W x 86.4H mm Display Resolution 10 ms maximum 20A maximum Effective Display Area *4 Not available on HG2G-5ST22VF models (color units without ethernet). Part Numbers & Dimensions on following page Dimensions (mm) %% Operator Interface Rated Voltage New Ethernet Port Yes 5.7" TFT 256 Color LCD 12-24V DC No * Yes 5.7" STN Monochrome LCD 24V DC No Yes 5.7" STN Monochrome LCD 12V DC No Body Color Part Number Light gray HG2G-5ST22TF-W Black HG2G-5ST22TF-B Silver HG2G-5ST22TF-S Light gray HG2G-5ST22VF-W Black HG2G-5ST22VF-B Silver HG2G-5ST22VF-S Light gray HG2G-SB22TF-W Black HG2G-SB22TF-B Silver HG2G-SB22TF-S Light gray HG2G-SB22VF-W Black HG2G-SB22VF-B Silver HG2G-SB22VF-S Light gray HG2G-SB21TF-W Black Light gray Black HG2G-SB21VF-B (( )) $$ ** Dimension Table (mm) Color HG2G-5S Monochrome HG2G-SB A 134.7 134.7 B 167.2 167.2 C 35.9 35.9 D 45.0 60.0 E 152.5 152.5 HG2G-SB21TF-B F 120.0 120.0 HG2G-SB21VF-W G H 50.0 50.0 40.9 35.9 J 5.0 5.0 K 43.6 40.1 * HG2G-5ST22VF models (color without ethernet) do not support Power Failure Backup Data. '' .. ++ -- Panel Cut-out (mm) +2 153 0 +2 Display Type && 121 0 Part Numbers HG2G Series to IDEC PLC Communication Cable Communication Type IDEC PLC RS232 MicroSmart/ Pentra MicroSmart (FC5A/FC4A) RS485 Ethernet (1:1) * OpenNet Controller Link Unit Used Part Number/Note Built-in Port HG9Z-AC102 FC4A-PC1/HPC1 HG9Z-AC102 FC5A-SIF2 Use shielded pair FC4A-PC2/HPC2 HG9Z-AC172 FC4A-PC3/HPC3 Use shielded pair FC4A-SX5ES1E Use CAT 5 ethernet crossover cable RS232 Built-in Port HG9Z-AC162 RS485 Built-in Port Use shielded pair Ethernet (1:1) * FC4A-SX5ES1E Use CAT 5 ethernet crossover cable * For 1:1 direct connection. If using a network hub, use CAT 5 straight cable. Note: For additional cables or other PLC manufacturers, refer to WindO/I-NV2 Users Manual. Software & Programming Cable Description Software Cable Part Number Automation Organizer Software Suite -programming software WindLDR (for PLCs), WindO/I-NV2 (for touchscreens), WindCFG SW1A-W1C Programming cable for HG2G STN Monochrome display (8 Pin Mini Din port) HG9Z-XCM1A or FC2A-KC4C Programming cable for HG2G TFT Color Display (USB miniB port) HG9Z-XCM2A Accessories Accessory Description Part Number Mounting Cut-out Adaptor Mount HG2G in HG2F panel cutout HG9Z-2A1 Mount HG2G in Proface panel cutout HG9Z-2A2 USB Panel-Mount Extention cable Extention for USB-mini port (5.7" TFT Color only) HG9Z-XCE21 Protective Cover Protective cover (min. 3 pcs,) HG9Z-2E2 Protective Sheet Protective sheet (min. 5 pcs.) HG9Z-2D5 Mounting Clips Replacement clips (min. 10 pcs.) SLD-K02 Battery Replacement Lithium Battery HG9Z-XR1 Terminal Block Replacement Terminal block for HG2G Host communication port HG9Z-XT09 OI Link Unit For O/I Link Communication (link HG#G Series only) HG9Z-2G1 IDEC Corporation * 1175 Elko Drive * Sunnyvale, CA 94089 800-262-IDEC (4332) * Fax: 408-745-5258 * www.IDEC.com/usa (c)2011 IDEC Corporation. All Rights Reserved. 07/11 PDF only