5.7” HG2G Basic OI Touchscreens
General Specifications
Model HG2G-5S (color) HG2G-SB (monochrome)
Rated Power Voltage 12V-24VDC 24V DC 12V DC
Power Voltage Range 10.2 to 28.8V DC 20.4 to 28.8V DC 10.2 to 18.0V DC
Power Consumption 8W maximum 10W maximum
Allowable Momentary
Power Interruption 10 ms maximum
Inrush Current 40A maximum 20A maximum 40A maximum
Dielectric Strength 1,000V AC, 10 mA, 1 minute between power and FG terminals
Insulation Resistance 50 MΩ minimum between power and FG terminals (500 V DC megger)
Operating Temperature 0 to +50°C (no freezing)
Operating Humidity 10 to 90% RH (no condensation)
Storage Temperature −20 to +60°C (no freezing)
Storage Humidity 10 to 90% RH (no condensation)
Pollution Degree 2
Vibration Resistance
5 to 8.4 Hz amplitude 3.5 mm,
8.4 to 150 Hz, acceleration 9.8 m/s2
10 cycles (100 minutes) on each of three mutually perpendicular axes
Shock Resistance 147 m/s2, 11 ms
5 shocks on each of three mutually perpendicular axes
Noise Immunity
Fast transient/burst test,
Power terminals: ±2 kV,
Communication line: ±1 kV (IEC/EN61000-4-4)
Electrostatic Discharge ESD-3 (RH-1)
Level 3 (Contact ±6 kV, air ±8 kV) (IEC/EN61000-4-2)
Corrosion Immunity Free from corrosive gases
Mounting Panel mounting
Degree of Protection *1
IP66 (IEC 60529)
(front part when
mounted)
IP65 (IEC 60529) (front part when mounted),
Type 13
Dimensions 167.2W ×134.7H ×40.9D mm
Weight (approx.) 0.5 kg
*1 Protection degree of the front surface after proper moutning on adequate panel.
Display Specifications
Model HG2G-5S (color) HG2G-SB (monochrome)
Display Color TFT Color LCD STN monochrome LCD
Color/Shade 256 colors 15 shades
Effective Display Area 115.2W × 86.4H mm
Display Resolution 320W × 240H pixels
View Angle Right and left 70°, up 70°, down 60°
Contrast Adjustment Adjustable from the front of the panel
Backlight LED CCFL
Backlight Life *2 50,000 hours minimum 75,000 hours minimum
Backlight Control Configurable: Always on or Auto Shut off
Brightness *3 400 cd/m2500 cd/m2
Brightness Adjustment 32 scales
*2 The backlight life refers to the time until the surface brightness reduces by half after continuous use
at 25°C.
*3 Brightness of the LCD only.
Function Specifications
Screen Types Base screen, sub screen, system screen
No. of Screens Base screen: 3,000 max.
Sub screen: 3,015 max.
User Memory 2 MB (including expansion fonts)
Parts
Bit Button, Word Button, Goto Screen, Key Button, Multi Button, Keypad, Selector
Switch, Potentiometer, Numerical Input, Character Input, Pilot Lamp, Multi-State
Lamp, Picture Display, Message Display, Message Switching Display, Alarm List
Display, Alarm Log Display, Numerical Display, Bar Graph, Trend Chart, Pie Chart,
Meter, Calendar, Bit Write Command, Word Write Command, Goto Screen Command,
Screen Script Command, Multi Command,Timer
Calendar *4 Year, Month, Day, Hour, Min., Sec., Day of Week, ±60 sec per month (at 25 °C)
Power Failure
Backup Data *4 Calendar, log data, keep internal relay, keep internal register
Battery Life *4 4 years (at 25°C) (1-year warranty)
*4 Not available on HG2G-5ST22VF models (color units without ethernet).
NEW 5.7” TFT Color LCD OI Touchscreen
256 Color •
Operating Voltage: 12-24 VDC •
Super Bright LCD Screen: 400 cd/m• 2
USB mini B port •
Approvals: UL508, CSA C22.2 No.142 •
Built-in Ethernet Port (optional) •
RS232,RS485, and RS422 Compatible •
Analog Touch Panel •
Power LED Indicator •
Supports IDEC and other brand PLC Manufacturers•
5.7” STN Mono LCD OI Touchscreen
15 level Monochrome•
Operating Voltage: 12 or 24 VDC •
Super Bright LCD Screen: 500 cd/m• 2
Approvals: UL508, UL1604, CSA C22.2 No.142 / No. 213 •
Built-in Ethernet Port (optional) •
RS232,RS485, and RS422 Compatible •
Analog Touch Panel •
Power LED Indicator •
Supports IDEC and other brand PLC Manufacturers•
Part Numbers & Dimensions on following page
Specifications
New
Models
Part Numbers
Operator Interface
Display Type Rated Voltage Ethernet Port Body Color Part Number
5.7” TFT
256 Color LCD 12-24V DC
Yes
Light gray HG2G-5ST22TF-W
Black HG2G-5ST22TF-B
Silver HG2G-5ST22TF-S
No *
Light gray HG2G-5ST22VF-W
Black HG2G-5ST22VF-B
Silver HG2G-5ST22VF-S
5.7” STN
Monochrome LCD 24V DC
Yes
Light gray HG2G-SB22TF-W
Black HG2G-SB22TF-B
Silver HG2G-SB22TF-S
No
Light gray HG2G-SB22VF-W
Black HG2G-SB22VF-B
Silver HG2G-SB22VF-S
5.7” STN
Monochrome LCD 12V DC
Yes Light gray HG2G-SB21TF-W
Black HG2G-SB21TF-B
No Light gray HG2G-SB21VF-W
Black HG2G-SB21VF-B
* HG2G-5ST22VF models (color without ethernet) do not support Power Failure Backup Data.
HG2G Series to IDEC PLC Communication Cable
IDEC PLC Communication
Type
Link Unit
Used Part Number/Note
MicroSmart/
Pentra MicroSmart
(FC5A/FC4A)
RS232
Built-in Port HG9Z-AC102
FC4A-PC1/HPC1 HG9Z-AC102
FC5A-SIF2 Use shielded pair
RS485 FC4A-PC2/HPC2 HG9Z-AC172
FC4A-PC3/HPC3 Use shielded pair
Ethernet (1:1) * FC4A-SX5ES1E Use CAT 5 ethernet crossover
cable
OpenNet
Controller
RS232 Built-in Port HG9Z-AC162
RS485 Built-in Port Use shielded pair
Ethernet (1:1) * FC4A-SX5ES1E Use CAT 5 ethernet crossover
cable
* For 1:1 direct connection. If using a network hub, use CAT 5 straight cable.
Note: For additional cables or other PLC manufacturers, refer to WindO/I-NV2 Users Manual.
Software & Programming Cable
Description Part Number
Software Automation Organizer Software Suite -programming software
WindLDR (for PLCs), WindO/I-NV2 (for touchscreens), WindCFG SW1A-W1C
Cable
Programming cable for HG2G STN Monochrome display (8 Pin
Mini Din port)
HG9Z-XCM1A or
FC2A-KC4C
Programming cable for HG2G TFT Color Display (USB miniB port) HG9Z-XCM2A
Accessories
Accessory Description Part Number
Mounting Cut-out
Adaptor
Mount HG2G in HG2F panel cutout HG9Z-2A1
Mount HG2G in Proface panel cutout HG9Z-2A2
USB Panel-Mount
Extention cable Extention for USB-mini port (5.7" TFT Color only) HG9Z-XCE21
Protective Cover Protective cover (min. 3 pcs,) HG9Z-2E2
Protective Sheet Protective sheet (min. 5 pcs.) HG9Z-2D5
Mounting Clips Replacement clips (min. 10 pcs.) SLD-K02
Battery Replacement Lithium Battery HG9Z-XR1
Terminal Block Replacement Terminal block for HG2G Host
communication port HG9Z-XT09
OI Link Unit For O/I Link Communication (link HG#G Series only) HG9Z-2G1
Dimensions (mm)
%
$
-
+.
'&
*
)
(
IDEC Corporation • 1175 Elko Drive • Sunnyvale, CA 94089
800-262-IDEC (4332) • Fax: 408-745-5258 • www.IDEC.com/usa
©2011 IDEC Corporation. All Rights Reserved. 07/11 PDF only
Panel Cut-out (mm)
153 0
+2
121 0
+2
New
%
$
-
+.
'&
*
)
(
Dimension Table (mm)
Color
HG2G-5S
Monochrome
HG2G-SB
A134.7 134.7
B167.2 167.2
C35.9 35.9
D45.0 60.0
E152.5 152.5
F120.0 120.0
G50.0 50.0
H 40.9 35.9
J 5.0 5.0
K 43.6 40.1