CHEMTRONICS TDS # 1520 E Technical Data Sheet Ultrajet PRODUCT DESCRIPTION Ultrajet compressed gas duster is a high pressure duster that cleans electronics without scratching delicate surfaces. This duster/ cleaner is nonflammable, residue-free and won't scratch delicate surfaces. Nonflammable Leaves no residue High pressure for contamination control Nonabrasive Excellent material compatibility Penetrates hard to reach areas Contains no ozone depleting compounds TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Boiling Point 3.18 Vapor Density (air=1) @ 77F 0.10% by weight Solubility in Water @ 77F F/1 atm 1.21 Specific Gravity (water = 1 @77F) Evaporation Rate (butyl acetate=1) Appearance TYPICAL APPLICATIONS Ultrajet duster is engineered for all aspects of electronic equipment maintenance and is particularly suited for applications involving: Audio/Video Equipment Computers and Other Electronic Equipment Fax Machines Laboratory Instruments Photo Equipment Printed Circuit Boards Printers Surface Mount Devices -15.7F Odor >1 Clear, Colorless Liquified Gas Slight Ethereal Surface Tension (dynes/cm @77F) 7.8 Flash Point (TCC) None Shelf life 5 years COMPATIBILITY Ultrajet is generally compatible with most materials used in printed circuit board fabrication, including sensitive plastics and compounds. As with any duster/cleaner, compatibility must be determined on a noncritical area prior to use. Material Buna-N Graphite HDPE LDPE Lexan Neoprene Cross-Linked PE Polyacrylate Polystyrene PVC Silicone Rubber Teflon Viton TECHNICAL & APPLICATION ASSISTANCE Chemtronics provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401. Compatibility Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent ENVIRONMENTAL IMPACT DATA ENVIRONMENTAL IMPACT DATA CFC HCFC CL Solv. VOC HFC ODP 0.0% 100.0% 0.00 CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown are the content by weight. Ozone depletion potential (ODP) is determined in accordance with the Montreal Protocol and U.S. Clean Air Act of 1990. The ODP of this product is 0.0. It is the sum of the ODP of the substances that may contribute to the depletion of stratospheric ozone, based upon the weight of each substance in the product's formulation. PERFORMANCE Pressure PSIG / Temperature F 200 P S I G 0.0% 0.0% 0.0% 150 100 50 NOTE: 0 20 40 60 80 Temperature F 100 120 140 USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. No special surface preparation is required prior to using Ultrajet. Direct high pressure spray onto the area to be cleaned to remove dust, dirt and other contaminant. For optimum performance and pin point control, use with the attached extension tube. AVAILABILITY ES1520E 400 ml Aerosol Europe This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. CHEMTRONICS does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. CHEMTRONICS 8125 COBB CENTER DRIVE KENNESAW, GA 30152 1-770-424-4888 DISTRIBUTED BY: REV. E (08/13)