PRODUCT DESCRIPTION
Ultrajet compressed gas duster is a high
pressure duster that cleans electronics
without scratching delicate surfaces. This
duster/ cleaner is nonflammable, residue-free
and won’t scratch delicate surf aces.
Nonflammable
Leaves no residue
High pressure for contamination control
Nonabrasive
Excellent material compatibility
Penetrates hard to reach areas
Contains no ozone depleting compounds
TYPICAL APPLICATIONS
Ultrajet duster is enginee red for all aspects
of electronic equipment maintenance and is
particularly suited for applications involving:
Audio/Video Equipment
Computers and Other Electronic
Equipment
Fax Machines
Laboratory Instruments
Photo Equipment
Printed Circuit Boards
Printers
Surface Mount Devices
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point -15.7°F
Vapor Density (air=1)
@ 77°F
3.18
Solubilit y in Water
@ 77°F F/1 atm
0.10% by weight
Specific Gravity
(water = 1 @77
°
F) 1.21
Evaporation Rate >1
(butyl acetate=1)
Appearance Clea r, Colorless
Liquif ied Gas
Odor Slight Ethereal
Surface Tension
(dynes/cm @77
°
F) 7.8
Flash Point (TCC) None
Shelf life
5 years
COMPATIBILITY
Ultrajet is generally compatible with most
materials used in printed circuit board
fabrication, including sensitive plastics and
compounds. As with any duster/cleaner,
compatibility must be determined on a non-
critical area prior to use.
TDS # 1520 E
CHEMTRONICS
Technical Data Sheet
Ultrajet
Material
Compatibility
Buna-N
Excellent
Graphite
Excellent
HDPE
Excellent
LDPE
Excellent
Lexan
Excellent
Neoprene
Excellent
Cross-Linked PE
Excellent
Polyacrylate
Excellent
Polystyrene
Excellent
PVC
Excellent
Silicone Rubber
Excellent
Teflon
Excellent
Viton
Excellent
PERFORMANCE
Press ure PSIG / Temperature F
-
P
S
-
I
G
-
-
20
40
60
80
100
120
140
Temperat ure F
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
No special surface prepar ation is r equired
prior to using Ultrajet. Direct high pressure
spray onto the area to be cleaned to remove
dust, dirt and othe r contaminant. For
optimum performance and pin point control,
use with the attached extension tube.
AVAILABILITY
ES1520E 400 ml Aerosol Europe
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. T he toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC
0.0%
VOC
0.0%
HCFC
0.0%
HFC
100.0%
CL Solv.
0.0%
ODP
0.00
CFC, HCFC, CL. SOLV., VOC, and HFC numbers
shown are the content by weight. Ozone depletion
potential (ODP) is determined in accordance with the
Montreal Protocol and U.S. Clean Air Act of 1990. The
ODP of this product is 0.0. It is the sum of the ODP of
the substances that may contribute to the depletion of
stratospheric ozone, based upon the weight of each
substance in the product’s formulation.
NOTE:
This information is believed to be accurate. It is intended
for professional end users having the skills to evaluate
and use the data properly. CHEMTRONICS does not
guarantee the accuracy of the data and assumes no
liabili ty in connect ion with damages incurred whil e using
it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. E (08/13)
DISTRIBUTED BY: