Microminiature Connectors Type MTB1 Space High performance Microminiature connectors, ESA qualified, for space applications. Space/High reliability MTB1 connectors meet stringent tests for outgassing and residual magnetism and are suitable for use in space, medical, and high performance military/aerospace applications. MTB1 connectors meet the performance of the ESCC 3401 Generic Specification and the dimensional requirements of the ESCC 3401/031 Detail Specification. Product Features Non-magnetic Single-in-line strip Insulator (no metal shell) : 2 to 81 cavities Suitable for Board-to Board, Boardto Cable, or Cable-to Cable applications Shell Size described by the total number of insulator cavities Non removable crimp type contacts Non-outgassing High performance MicropinTM contact system ( "twist pin" spring male contact and tubular socket contact) Contact centers : 1,27 (.050) Connectors are supplied with the Terminations or Cables installed in factory Materials and Finishes Insulators Diallylphtalate thermoset material, UL 94-V0, glass filled, dark green color Female contacts Copper alloy / Finish : 1,27 m (50 in) min. Gold over Copper underlay Male contacts Copper alloy / Finish : 1,27 m (50 in) min. Gold over Copper underlay Guide posts and polarization keys Stainless Steel type 303, passivated Female latches Stainless Steel type 303, passivated Male latches Stainless Steel type 303, passivated Encapsulant Epoxy Uninsulated rigid Wire Copper / Finish : 1,27 m (50 in) min. Gold over 2,54 (100 in) min. Silver underlay ESCC 3901/013 Cables Copper alloy / Finish 2,00 m (79 in) min. Silver / Extruded PTFE Insulation MIL-W-16878/4 Cables Copper alloy / Finish Silver coating / Extruded PTFE Insulation Dimensions are shown in mm (inch) Dimensions subject to change 136 Microminiature Connectors Type MTB1 Space Quality Levels ESA/ESCC Quality Level. The Dole plant (France) is qualified by ESA for the supply of Microminiature connectors Type MTB1, according to the ESCC Generic Specification N 3401, and to the applicable ESCC Detail Specification n 3401/031. First qualification obtained in 1986 (reniewed every 2 years). Qualification certificate : 141 (MTB1). Applications : Flight equipments, satellites, launchers (ESA requirements). FR022 Quality Level. "Commercial Space Grade". C&K Connector Specification CS FR022, amendment to the ESCC Generic Specification n 3401, for low cost products manufactured : - in the same ESA qualified site - through the same manufacturing and control processes - with the same piece parts - with lighter controls, documentation and traceability Applications : Engineering models, ground equipments, testing, some flight equipments (no need for high requirements). The connectors and accessories, supplied according to these 2 quality levels, are totally compatible, interchangeable, and intermateable, as they are manufactured with the same piece parts (except the cables), in the same ESA qualified site. Connector Styles Description of the 3 Connector Styles proposed for the Space applications (Combinations of Configurations and Quality Levels). Connector Style Configuration Quality Level Space ESA ESA ESA Space FR022 ESA FR022 Standard FR022 Standard FR022 Configuration characteristics. Accessories Configuration ESA Configuration Standard Cavity filled with epoxy 1 & N (mandatory) N.A. Guide Posts 2 & N-1 (mandatory) 1 & N (option) Polarization key 3 to N-2 (option) 1 to N (option) Latching (even number of cavities) N/2 (option) N/2 (option) Latching (odd number of cavities) N/2 - 1 (option) N/2 - 1 (option) Dimensions are shown in mm (inch) Dimensions subject to change 137 Microminiature Connectors Type MTB1 Space Performance Specifications Operating Temperature range -55C / +125C (-67F / +257F) Storage Temperature range -55C / +125C (-67F / +257F) Working Voltage (between contacts and contact and shell) Rated Current Insulation Resistance (500 V DC) Voltage Proof Contact Retention in insert Sea level 150 Vrms Solid uninsulated Wire 2,5 A max. Mating / Unmating Forces (per contact) Mechanical Endurance Contact Resistance Maximum Rated Current Maximum Weight Residual Magnetism Level AWG 26 Wire 2,5 A max. AWG 28 Wire 1,5 A max. 5000 M min. 600 Vrms / 2.0 mA max. leakage current 22,25 N max. / No contact axial displacement allowed Gauge Fixture Engagement / Separation Forces (Male Contacts) 33000 m (108240 feet) altitude 100 Vrms Max. Min. Separation Force (N min.) Inner diameter min. / max. 0,559 (.0220) / 0,564 (.0222) 0,582 (.0229) / 0,587 (.0231) 0,137 Engagement Force (N max.) 1,667 Mating : 2.2 N max. Unmating : 0.14 N min. / 2.2 N max. 500 cycles mating/unmating Low level current (10 mA / 20 mV DC) : 6.0 m max. Rated current : 5.0 m max. Nb of Contacts per Connector 2 to 4 5 to 14 15 and over Solid uninsulated Wire 2,0 A max. 1,8 A max. 1,4 A max. Male Contact Female contact Plug Insulator Receptacle Insulator Guide Posts (pair) Latching Plug part Latching Receptacle part Solid Uninsulated Wire Insulated Cable AWG26 (ESCC 390101302B) Insulated Cable AWG28 (ESCC 390101301B) AWG 26 Wire 2,0 A max. 1,8 A max. 1,4 A max. AWG 28 Wire 1,4 A max. 1,2 A max. 0,9 A max. 0.020 g 0.020 g 0.021 g / cavity 0.006 g / cavity 0.035 g 0.030 g 0.040 g 1.60 g / m 2.30 g / m 1.80 g / m 20000 Gamma max. (NM) Dimensions are shown in mm (inch) Dimensions subject to change 138 Microminiature Connectors Type MTB1 Space Contact Design Welded tip Sleeve Crimp area Wire Wire crimp The high-performance and reliable contact characteristics are obtained by the MicropinTM contact system. The flexible "twist-pin" spring contact consists of 7 strands of 0,127 (.005) diameter beryllium copper wire helically wound around a core of 3 strands 0,09 (.0035) diameter soft copper wire. This wire bundle is crimped into a sleeve at one end. The other end is terminated with a hemispherically shaped weld. The wire bundle is compressed to create a bulge with a diameter slightly larger than the socket inside diameter. The pin elongates and twists when it enters the socket. Electrical contact is maintained along 7 spiral lines. The socket is a precision-made tube with a chamfered lead-in. Normal mating conditions Severe misalignment Twist-pin contacts will mate even under severe misalignment. The flexible twist-pin is recessed into the insulator and the rigid socket is exposed, reversing the traditional positions of pin and socket. During mating, the socket is guided into the pin insulator by the lead-in chamfer. The pin is kept from flexing beyond the socket capture radius by the walls of the cavity. The hemispherical weld of controlled radius at the tip of the pin combines with the lead-in chamfers of the socket contact and the pin insulator to cam the pin into alignment. By controlling the welding process and the dimensions of the socket contact and the insulators, it is impossible for the recessed pin to escape the socket capture radius. Dimensions are shown in mm (inch) Dimensions subject to change 139 Microminiature Connectors Type MTB1 Space Terminations Harness type insulated cables : AWG 26 to AWG 28, 7 strand, single-core cables. AWG26, length 508,00 (20.000) : - Cable ESCC 390101302B - Cable MIL-W-16878/4 Code FR112 Code H038 (ESA Quality Level) (FR022 Quality Level) AWG26, length 914,00 (36.000) : - Cable ESCC 390101302B - Cable MIL-W-16878/4 Code FR113 Code H011 (ESA Quality Level) (FR022 Quality Level) AWG28, length 508,00 (20.000) : - Cable ESCC 390101301B - Cable MIL-W-16878/4 Code FR114 Code H038-AWG28 (ESA Quality Level) (FR022 Quality Level) AWG28, length 914,00 (36.000) : - Cable ESCC 390101301B - Cable MIL-W-16878/4 Code FR115 Code H011-AWG28 (ESA Quality Level) (FR022 Quality Level) Solid uninsulated wires (pigtails) : 0,45 (.018) diameter, AWG 25 Copper wire, Gold finish. Straight terminations : - Length 25,40 (1.000) - Length 25,40 (1.000) Code FR116 Code L2 (ESA Quality Level) (FR022 Quality Level) PCB terminations : 0,45 (.018) diameter, AWG 25 Copper wire, Gold finish. 90 bent PCB terminations, 1 row : - Length 4,00 (.157) - Length 4,83 (.190) Code FR116C or AL57C Code BL57 (Configuration ESA) (Configuration Standard) 90 bent PCB terminations, 2 rows, even numbered contacts on second row : - Length 4,00 (.157) Code FR116D1 or AL57D1 - Length 4,83 (.190) Code AL57 (Configuration ESA) (Configuration Standard) 90 bent PCB terminations, 2 rows, odd numbered contacts on second row : - Length 4,00 (.157) Code FR116D1 or AL57D2 - Length 4,83 (.190) Code not available : CDRI (Configuration ESA) (Configuration Standard) Other termination types available on request : CDRI - Customer Design Request Information. Termination Type "Space ESA" Style "Space FR022" Style AWG26, L 508,00 (20.000) FR112 H038 "Standard FR022" Style H038 AWG26, L 914,00 (36.000) FR113 H011 H011 AWG28, L 508,00 (20.000) FR114 H038-AWG28 H038-AWG28 AWG28, L 914,00 (36.000) FR115 H011-AWG28 H011-AWG28 Straight PCB, L 25,40 (1.000) FR116 L2 L2 90 bent PCB, 1 row, L 4,00 (.157) L 4,83 (.190) FR116C AL57C 90 bent PCB, 2 rows, even numbered contactson second row L 4,00 (.157) L 4,83 (.190) FR116D1 AL572D1 90 bent PCB, 2 rows, odd numbered contacts on second row L 4,00 (.157) L 4,83 (.190) FR116D2 AL57D2 BL57 AL57 N.A. : CDRI Dimensions are shown in mm (inch) Dimensions subject to change 140 Microminiature Connectors Type MTB1 Space Dimensions Shell Size Described by the total number of insulator cavities. Receptacle B 2,03 0,13 (.080 .005) C1 2,54 0,13 (.100 .005) C2 7,19 0,13 (.283 .005) D 3,18 max. (.125 max.) E 1,27 Typ. (.050 Typ.) Plug E A C1 D B D C2 Rear potting (epoxy) : Extension dimension D at the rear of the insulator. Shell Size A 0,38 (.015) Shell Size A 0,38 (.015) Shell Size A 0,38 (.015) Shell Size A 0,38 (.015) 2 3,05 (.120) 22 28,45 (1.120) 42 53,85 (2.120) 62 79,25 (3.120) 3 4,32 (.170) 23 29,72 (1.170) 43 55,12 (2.170) 63 80,52 (3.170) 4 5,59 (.220) 24 30,99 (1.220) 44 56,39 (2.220) 64 81,79 (3.220) 5 6,85 (.270) 25 32,26 (1.270) 45 57,66 (2.270) 65 83,06 (3.270) 6 8,13 (.320) 26 33,53 (1.320) 46 58,93 (2.320) 66 84,33 (3.320) 7 9,40 (.370) 27 34,80 (1.370) 47 60,20 (2.370) 67 85,60 (3.370) 8 10,67 (.420) 28 36,07 (1.420) 48 61,47 (2.420) 68 86,87 (3.420) 9 11,94 (.470) 29 37,34 (1.470) 49 62,74 (2.470) 69 88,14 (3.470) 10 13,20 (.520) 30 38,61 (1.520) 50 64,01 (2.520) 70 89,41 (3.520) 11 14,48 (.570) 31 39,88 (1.570) 51 65,28 (2.570) 71 90,68 (3.570) 12 15,75 (.620) 32 41,15 (1.620) 52 66,55 (2.620) 72 91,95 (3.620) 13 17,02 (.670) 33 42,42 (1.670) 53 67,82 (2.670) 73 93,22 (3.670) 14 18,29 (.720) 34 43,69 (1.720) 54 69,09 (2.720) 74 94,49 (3.720) 15 19,56 (.770) 35 44,96 (1.770) 55 70,36 (2.770) 75 95,76 (3.770) 16 20,83 (.820) 36 46,23 (1.820) 56 71,63 (2.820) 76 97,03 (3.820) 17 22,10 (.870) 37 47,50 (1.870) 57 72,90 (2.870) 77 98,30 (3.870) 18 23,37 (.920) 38 48,77 (1.920) 58 74,17 (2.920) 78 99,57 (3.920) 19 24,64 (.970) 39 50,04 (1.970) 59 75,44 (2.970) 79 100,84 (3.970) 20 25,91 (1.020) 40 51,31 (2.020) 60 76,71 (3.020) 80 102,11 (4.020) 21 27,18 (1.070) 41 52,58 (2.070) 61 77,98 (3.070) 81 103,38 (4.070) Dimensions are shown in mm (inch) Dimensions subject to change 141 Microminiature Connectors Type MTB1 Space Contacts Plug (Male Contact) L1 Insulator Min. Max. L1 0,25 (.010) 0,91 (.036) L2 3,07 (.121) 3,33 (.131) Receptacle (Female Contact) L2 Insulator Position of the Contacts : - Cavities 3 to N-2 for the Configuration ESA (*) - Cavities 1 to N for the Configuration Standard (*) Note (*) : Optional accessories (Polarisation Key or Latching) placed in contact cavities, the remaining contact position numbers being unchanged. Guide Post / Polarization Key Purpose - Guide Post : Pre-positionning of the contacts before mating. Mandatory (configuration ESA) or optional (configuration Standard) - Polarisation Key : Prevention against reversed position mating or mixing of similar variants. Optional (all configurations) Plug Receptacle D1 D2 L2 L1 D1 0,90 0,05 (.034 .002) D2 0,81 0,03 (.032 .001) L1 5,40 min. (.213 min.) L2 5,08 0,25 (.200 .010) Position of the Guide Posts (metal rods on the receptacle / holes in the insulator plug) : - Cavities 2 and N-1 for the Configuration ESA - Cavities 1 and N for the Configuration Standard (option) Position of the Polarisation Key (metal rod on the receptacle / hole in the insulator plug) : - Cavities 3 to N-2 for the Configuration ESA (option) - Cavities 1 to N for the Configuration Standard (option) Dimensions are shown in mm (inch) Dimensions subject to change 142 Microminiature Connectors Type MTB1 Space Latching Purpose: Optional locking mechanism of the mated connectors. Locking conditions D H F H 2,80 max. (.110 max.) D 0,05 min. (.002 min.) Latching force F : 10 N max. Unlocking condition F1 Unlocking force F1 : 3 N min. Dimensions are shown in mm (inch) Dimensions subject to change 143 Microminiature Connectors Type MTB1 Space Straight PCB Terminations (View from mating side) Contact 1 Marking on this Side D Configuration ESA / Plug (Male contacts) L Termination code : FR116 Contact 1 Marking on this Side D Configuration ESA / Receptacle (Female contacts) L Termination code : FR116 Contact 1 Marking on this Side D Configuration Standard / Plug (Male contacts) L Termination code : L2 Contact 1 Marking on this Side D Configuration Standard / Receptacle (Female contacts) L Termination code : L2 D 0,455 0,055 (.018 .002) L 25,40 min. (1.000 min.) Dimensions are shown in mm (inch) Dimensions subject to change 144 Microminiature Connectors Type MTB1 Space 90 bent PCB Terminations (1 row) (View from mating side) Contact 1 Marking on this Side Configuration ESA / Plug D (Male contacts) Termination code : Quality Level ESA : FR116C Quality Level FR022 : AL57C L A Contact 1 Marking on this Side Configuration ESA / Receptacle (Female contacts) D Termination code : Quality Level ESA : FR116C Quality Level FR022 : AL57C L A Contact 1 Marking on this Side Configuration Standard / Plug (Male contacts) D L1 Termination code : BL57 A Contact 1 Marking on this Side Configuration Standard / Receptacle (Female contacts) D L1 Termination code : BL57 A A 2,54 Typ (.100 Typ) D 0,455 0,055 (.018 .002) L 4,00 min. (.157 min.) L1 4,83 min. (.190 min.) Dimensions are shown in mm (inch) Dimensions subject to change 145 Microminiature Connectors Type MTB1 Space 90 bent PCB Terminations (2 rows / even numbered contacts on second row) (View from mating side) Contact 1 Marking on this Side Configuration ESA / Plug (Male contacts) D L Termination code : Quality Level ESA : FR116D1 Quality Level FR022 : AL57D1 A A A Contact 1 Marking on this Side Configuration ESA / Receptacle (Female contacts) D L Termination code : Quality Level ESA : FR116D1 Quality Level FR022 : AL57D1 A A A Contact 1 Marking on this Side Configuration Standard / Plug (Male contacts) D L1 Termination code : AL57 A A A Contact 1 Marking on this Side Configuration Standard / Receptacle (Female contacts) D L1 Termination code : AL57 A A A 2,54 Typ (.100 Typ) D 0,455 0,055 (.018 .002) L 4,00 min. (.157 min.) L1 4,83 min. (.190 min.) A Dimensions are shown in mm (inch) Dimensions subject to change 146 Microminiature Connectors Type MTB1 Space 90 bent PCB Terminations (2 rows / odd numbered contacts on second row) (View from mating side) Contact 1 Marking on this Side Configuration ESA / Plug (Male contacts) D L Termination code : Quality Level ESA : FR116D2 Quality Level FR022 : AL57D2 A A A Contact 1 Marking on this Side Configuration ESA / Receptacle (Female contacts) D L Termination code : Quality Level ESA : FR116D2 Quality Level FR022 : AL57D2 A A A Contact 1 Marking on this Side Configuration Standard / Plug (Male contacts) D L1 Termination code : No code available Supply per CDRI (*) A A A Contact 1 Marking on this Side Configuration Standard / Receptacle (Female contacts) D L1 Termination code : No code available Supply per CDRI (*) A A A 2,54 Typ (.100 Typ) D 0,455 0,055 (.018 .002) L 4,00 min. (.157 min.) L1 4,83 min. (.190 min.) A (*) : CDRI, see CDRI section Dimensions are shown in mm (inch) Dimensions subject to change 147 Microminiature Connectors Type MTB1 Space ESA Configuration Options (Face view plug inserts. Use a mirror image for receptacle inserts) Configurations Cavity position (from left to right) = 1 to N Number of Cavities Cavity Identification Total Access. Cts Epoxy G. Post Polar. Latch Cts (*) Even N 6 N-6 1&N 2 & N-1 3 to N-2 N/2 3 to N-2 Odd N 6 N-6 1&N 2 & N-1 3 to N-2 N/2 + 0.5 3 to N-2 Even N 5 N-5 1&N 2 & N-1 N/2 3 to N-2 Odd N 5 N-5 1&N 2 & N-1 N/2 + 0.5 3 to N-2 Even N 5 N-5 1&N 2 & N-1 3 to N-2 3 to N-2 Odd N 5 N-5 1&N 2 & N-1 3 to N-2 3 to N-2 Even N 4 N-4 1&N 2 & N-1 3 to N-2 Odd N 4 N-4 1&N 2 & N-1 3 to N-2 Polarization + Latching Latching Polarization Basis Example shown : Total number of cavities : 12 (even number) or 11 (odd number) Polarization Key placed on cavity number 4 Note (*) : Except the cavities used for the optional Polarization Key or Latching. Epoxy Guide Post Polarization Key Contact Latching Dimensions are shown in mm (inch) Dimensions subject to change 148 Microminiature Connectors Type MTB1 Space Standard Configuration without Guide Posts Options (Face view plug inserts. Use a mirror image for receptacle inserts) Configurations Number of Cavities Cavity Identification Epox y Polar. Latch Cts (*) N-2 1 to N N/2 1 to N 2 N-2 1 to N N/2 + 0.5 1 to N N 1 N-1 N/2 1 to N N 1 N-1 N/2 + 0.5 1 to N Even N 1 N-1 1 to N 1 to N Odd N 1 N-1 1 to N 1 to N Even N 0 N 1 to N Odd N 0 N 1 to N Cavity position (from left to right) = 1 to N Total Access. Cts Even N 2 Odd N Even Odd G. Post Polarization + Latching Latching Polarization Basis Example shown : Total number of cavities : 12 (even number) or 11 (odd number) Polarization Key placed on cavity number 4 Note (*) : Except the cavities used for the optional Polarization Key or Latching. Polarization Key Contact Latching Dimensions are shown in mm (inch) Dimensions subject to change 149 Microminiature Connectors Type MTB1 Space Standard Configuration with Guide Posts Options (Face view plug inserts. Use a mirror image for receptacle inserts) Configurations Number of Cavities Cavity position (from left to right) = 1 to N Total Access. Cts Even N 4 Odd N Even Odd Cavity Identification Epoxy G. Post Polar. Latch Cts (*) N-4 1&N 2 to N-1 N/2 2 to N-1 4 N-4 1&N 2 to N-1 N/2 + 0.5 2 to N-1 N 3 N-3 1&N N/2 2 to N-1 N 3 N-3 1&N N/2 + 0.5 2 to N-1 Even N 3 N-3 1&N 2 to N-1 2 to N-1 Odd N 3 N-3 1&N 2 to N-1 2 to N-1 Even N 2 N-2 1&N 2 to N-1 Odd N 2 N-2 1&N 2 to N-1 Polarization + Latching Latching Polarization Basis Example shown : Total number of cavities : 12 (even number) or 11 (odd number) Polarization Key placed on cavity number 4 Note (*) : Except the cavities used for the optional Polarization Key or Latching. Guide Post Polarization Key Contact Latching Dimensions are shown in mm (inch) Dimensions subject to change 150 Microminiature Connectors Type MTB1 Space How to order - Connector Style "Space ESA" Description (example) : 340103102B 12PFR116D1-4 3401031 02 B 12 P FR116D1 - 4 Polarization Key Cavity number : Position of the Polarization Key Nothing : No polarization Key Termination Type FR112 FR113 FR114 FR115 FR116 FR116C FR116D1 FR116D2 : Harness type, AWG26, length 508,00 (20.000), cable 390101302B : Harness type, AWG26, length 914,00 (36.000), cable 390101302B : Harness type, AWG28, length 508,00 (20.000), cable 390101301B : Harness type, AWG28, length 914,00 (36.000), cable 390101301B : Straight PCB Terminations, length 25,40 (1.000) : 90 bent PCB Terminations, 1 row length 4,00 (.157) : 90 bent PCB Terminations, 2 rows, even contacts on second row length 4,00 (.157) : 90 bent PCB Terminations, 2 rows, odd contacts on second row length 4,00 (.157) Contact Type P : Pin (Male contact) S : Socket (Female contact) Shell Size Total number of cavities (**) : From 5 to 81 Testing Level Level B (Standard : B3 = LAT3) Variant 01 : Without Latching 02 : With Latching ESCC Detail Specification number Other configurations available on request, consult factory. CDRI (*), with description MTB1-115366-xxxx Note (**) : Connectors are described by the total number of cavities (N), including : - Number of cavities for Epoxy : - Number of cavities for Guide Posts : - Number of cavities for Polarization Key : - Number of cavities for Latching : - Number of cavities for Contacts : 2 (Position 1 & N) 2 (Position 2 & N-1) 1 (option) (Position 3 to N-2) 1 (option) (Position N/2 for even numbers, N/2 + 0.5 for odd numbers) N-4 max.(Position 3 to N-2) (*) : CDRI, see special section Dimensions are shown in mm (inch) Dimensions subject to change 151 Microminiature Connectors Type MTB1 Space How to order - Connector Style "Space FR022" Description (example) : MTB1-12PAL57D1-L-10-4-FR022 MTB1 12 P AL57D1 -L -10 -4 -FR022 Quality Level (Connector Specification CS FR022) (Commercial Space Grade) Polarization Key Cavity number : Position of the Polarization Key Nothing : No polarization Key Configuration ESA (Code 10) 2 cavities with Epoxy (Position 1 & N) 2 cavities with Guide Posts (Position 2 & N-1) (Cables MIL-W-16878/4) Latching Nothing : Without Latching Code L : With Latching Termination Type H038 : Harness type, AWG26, length 508,00 (20.000), cable MIL-W-16878/4 H011 : Harness type, AWG26, length 914,00 (36.000), cable MIL-W-16878/4 H038-AWG28: Harness type, AWG28, length 508,00 (20.000), cable MIL-W-16878/4 H011-AWG28: Harness type, AWG28, length 914,00 (36.000), cable MIL-W-16878/4 L2 : Straight PCB Terminations, length 25,40 (1.000) AL57C : 90 bent PCB Terminations, 1 row length 4,00 (.157) AL57D1 : 90 bent PCB Terminations, 2 rows, even contacts on second row length 4,00 (.157) AL57D2 : 90 bent PCB Terminations, 2 rows, odd contacts on second row length 4,00 (.157) Contact Type P : Pin (Male contact) S : Socket (Female contact) Shell Size Total number of cavities (**) : From 5 to 81 Microminiature, MTB1 series 0ther configurations available on request, consult factory. CDRI (*), with description MTB1-115288-xxxx Note (**) : Connectors are described by the total number of cavities (N), including : - Number of cavities for Epoxy : - Number of cavities for Guide Posts : - Number of cavities for Polarization Key : - Number of cavities for Latching : - Number of cavities for Contacts : 2 (Position 1 & N) 2 (Position 2 & N-1) 1 (option) (Position 3 to N-2) 1 (option) (Position N/2 for even numbers, N/2 + 0.5 for odd numbers) N-4 max. (Position 3 to N-2) Dimensions are shown in mm (inch) Dimensions subject to change 152 Microminiature Connectors Type MTB1 Space (*) : CDRI, see special section How to order - Connector Style "Standard FR022" Description (example) : MTB1-12PAL57-L-01-4-FR022 MTB1 12 P AL57 -L -01 -4 -FR022 Quality Level (Connector Specification CS FR022) (Commercial Space Grade) Polarization Key Cavity number : Position of the Polarization Key Nothing : No polarization Key Guide Posts Nothing : No Guide Posts Code 01 : 2 cavities with Guide Posts (Position 1 & N) Latching Nothing : Without Latching Code L : With Latching Termination Type H038 : Harness type, AWG26, length 508,00 (20.000), cable MIL-W-16878/4 H011 : Harness type, AWG26, length 914,00 (36.000), cable MIL-W-16878/4 H038-AWG28 : Harness type, AWG28, length 508,00 (20.000), cable MIL-W-16878/4 H011-AWG28 : Harness type, AWG28, length 914,00 (36.000), cable MIL-W-16878/4 L2 : Straight PCB Terminations, length 25,40 (1.000) BL57 : 90 bent PCB Terminations, 1 row length 4,83 (.190) AL57 : 90 bent PCB Terminations, 2 rows, even contacts on second row length 4,83 (190) Contact Type P : Pin (Male contact) S : Socket (Female contact) Shell Size Total number of cavities (**) : From 1 to 81 Microminiature, MTB1 series Other configurations available on request, consult factory. CDRI (*), with description MTB1-115288-xxxx Note (**) : Connectors are described by the total number of cavities (N), including : - Number of cavities for Epoxy : - Number of cavities for Guide Posts : - Number of cavities for Polarization Key : - Number of cavities for Latching : - Number of cavities for Contacts : 0 (Not applicable) 2 (option)(Position 1 & N) 1 (option)(Position 1 to N) 1 (option)(Position N/2 for even numbers, N/2 + 0.5 for odd numbers) N max. (Position 1 to N) Dimensions are shown in mm (inch) Dimensions subject to change 153 Microminiature Connectors Type MTB1 Space CDRI Description The "Customer Design Request Information" document (CDRI) is an C&K Specification, describing a product supplied per specific customer specification. For CDRI : Consult factory. Content The CDRI document includes all the necessary data for : - Customer use : characteristics of the product to be inserted into the Customer equipment - C&K use : information for the manufacturing of the product The main data are the following : - Detailed description of the product - Eventual applicable specifications or other documents - Eventual drawings (Customer or C&K) - Detailed amendments to the reference product (dimensions, piece parts, materials, cables) - Detailed amendments to the manufacturing process (assembling, controls, marking, packaging, documentation) - Quality level : ESA : Supply in accordance with the requirements of the ESCC Generic Specification n 3401 FR022 : Supply in accordance with the requirements of the C&K Specification CS FR022 Other if applicable - Allocated Descriptions and Part Numbers - Allocated CDRI number Process - Identification of the Customer request (specification, drawing, technical note) - Analysis and feasibility study - Proposal of the best solution, with eventual modifications - Finalization of the Customer request - Eventual prototype - Commercial offer - Finalization of the CDRI document Technical issues specific to the MTB1 Connectors The amendments to the MTB1 Connectors described in this Catalogue can be made by the use of the following parameters : - Other cable lengths - Other PCB terminations - Other cable references - Cables AWG 30 - Coaxial cables, with conductor wired to a contact and shield wired to an adjacent contact or to an external cable - Shielded cables, with conductor wired to a contact and shield wired to an adjacent contact or to an external cable - Solder Cup terminations - Protection of the specific wiring areas by thermo-shrinkable kynar tubes - Transversal holes in the insulators for mechanical fixing onto PCB - Extra-rear potting for Insulators strengthening Dimensions are shown in mm (inch) Dimensions subject to change 154