1
Copyright © 2010, Everlight All Rights Reserved. Release Date : 3.Jan.2017 Issue No: DSE-0001613 Rev.4
www.everlight.com
SMD B
19-217/G7C-BK2L2VY/3T
Features
Package in 8mm tape on 7diameter reel.
Compatible with automatic placement equipment.
Compatible with infrared and vapor phase reflow solder process.
Mono-color type.
Pb-free.
The product itself will remain within RoHS compliant version.
Compliance with EU REACH.
Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm)
Description
The 19-217 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher
packing density, reduced storage space and finally smaller equipment to be obtained.
Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Backlighting in dashboard and switch.
Telecommunication: indicator and backlighting in telephone and fax.
Flat backlight for LCD, switch and symbol.
General use.
Ver.:4 Release Date:01/09/2017 狀態:Approved(正式發行)
 
DATASHEET
SMD B
19-217/G7C-BK2L2VY/3T
2
Copyright © 2010, Everlight All Rights Reserved. Release Date : 3.Jan.2017 Issue No: DSE-0001613 Rev.4
www.everlight.com
Device Selection Guide
Chip
Materials
Emitted Color
Resin Color
AlGaInP
Brilliant Yellow Green
Water Clear
Absolute Maximum Ratings (Ta=25)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
60
mA
Power Dissipation
Pd
60
mW
Operating Temperature
Topr
-40 ~ +85
Storage Temperature
Tstg
-40 ~ +90
Electrostatic Discharge
ESDHBM
2000
V
Soldering Temperature
Tsol
Reflow Soldering : 260 for 10 sec.
Hand Soldering : 350 for 3 sec.
Ver.:4 Release Date:01/09/2017 狀態:Approved(正式發行)
 
DATASHEET
SMD B
19-217/G7C-BK2L2VY/3T
3
Copyright © 2010, Everlight All Rights Reserved. Release Date : 3.Jan.2017 Issue No: DSE-0001613 Rev.4
www.everlight.com
Electro-Optical Characteristics (Ta=25)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous
Intensity
Iv
9.0
-----
18.0
mcd
IF=5mA
Viewing
Angle
1/2
-----
120
------
deg
Peak
Wavelength
λp
-----
575
------
nm
Dominant
Wavelength
λd
567.5
------
575.5
nm
Spectrum
Radiation
Bandwidth
λ
-----
20
------
nm
Forward
Voltage
VF
1.70
-----
2.20
V
Reverse
Current
IR
-----
-----
10
μA
VR=5V
Note:
1.Tolerance of Luminous Intensity: ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.05V
Ver.:4 Release Date:01/09/2017 狀態:Approved(正式發行)
 
DATASHEET
SMD B
19-217/G7C-BK2L2VY/3T
4
Copyright © 2010, Everlight All Rights Reserved. Release Date : 3.Jan.2017 Issue No: DSE-0001613 Rev.4
www.everlight.com
Bin Range of Luminous Intensity
Bin Code
Min.
Max.
Unit
Condition
K2
9.0
11.5
mcd
IF =5mA
L1
11.5
14.5
L2
14.5
18.0
Bin Range Of Dom. Wavelength
Bin Code
Min.
Max.
Unit
Condition
C15
567.5
569.5
nm
IF =5mA
C16
569.5
571.5
C17
571.5
573.5
C18
573.5
575.5
Bin Range Of Forward Voltage
Bin Code
Min.
Max.
Unit
Condition
19
1.70
1.80
V
IF =5mA
20
1.80
1.90
21
1.90
2.00
22
2.00
2.10
23
2.10
2.20
Note:
1.Tolerance of Luminous Intensity: ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.05V
Ver.:4 Release Date:01/09/2017 狀態:Approved(正式發行)
 
DATASHEET
SMD B
19-217/G7C-BK2L2VY/3T
5
Copyright © 2010, Everlight All Rights Reserved. Release Date : 3.Jan.2017 Issue No: DSE-0001613 Rev.4
www.everlight.com
Typical Electro-Optical Characteristics Curves
Ta=25°C
Relative luminous intensity
Ambient Temperature T C )
a
%)
(Relative luminous intensity()%
Wavelength λp(nm)
Ta=25°C
Forward Voltage V (V)
F
Forward Current I (mA)
Relative luminous intensity ()%
Forward Current I (mA)
Ta=25°C
Ambient Temperature T C
a)
Forward Current I (mA)
Ta=25°C
Ver.:4 Release Date:01/09/2017 狀態:Approved(正式發行)
 
DATASHEET
SMD B
19-217/G7C-BK2L2VY/3T
6
Copyright © 2010, Everlight All Rights Reserved. Release Date : 3.Jan.2017 Issue No: DSE-0001613 Rev.4
www.everlight.com
Package Outline Dimensions
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
Ver.:4 Release Date:01/09/2017 狀態:Approved(正式發行)
 
DATASHEET
SMD B
19-217/G7C-BK2L2VY/3T
7
Copyright © 2010, Everlight All Rights Reserved. Release Date : 3.Jan.2017 Issue No: DSE-0001613 Rev.4
www.everlight.com
Moisture Resistant Packing Materials
Label Explanation
CPN: Customers Product Number
P/N: Product Number
QTY: Packing Quantity
CAT: Luminous Intensity Rank
HUE: Chromaticity Coordinates & Dom. Wavelength Rank
REF: Forward Voltage Rank
LOT No: Lot Number
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Ver.:4 Release Date:01/09/2017 狀態:Approved(正式發行)
 
DATASHEET
SMD B
19-217/G7C-BK2L2VY/3T
8
Copyright © 2010, Everlight All Rights Reserved. Release Date : 3.Jan.2017 Issue No: DSE-0001613 Rev.4
www.everlight.com
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag
Ver.:4 Release Date:01/09/2017 狀態:Approved(正式發行)
 
DATASHEET
SMD B
19-217/G7C-BK2L2VY/3T
9
Copyright © 2010, Everlight All Rights Reserved. Release Date : 3.Jan.2017 Issue No: DSE-0001613 Rev.4
www.everlight.com
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less.
2.3 After opening the package :The LED´s floor life is 1 year under 30 or less and 60%RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5 for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
Pre-heating
150~20C
60~120sec.
C/sec.Max.
Above 21C
60~150sec.
260°C Max.
10sec. Max.
C/sec.Max.
Above255°C
30sec.Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than
the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful
because the damage of the product is often started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head
soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs
will or will not be damaged by repairing.
Ver.:4 Release Date:01/09/2017 狀態:Approved(正式發行)
 
DATASHEET
SMD B
19-217/G7C-BK2L2VY/3T
10
Copyright © 2010, Everlight All Rights Reserved. Release Date : 3.Jan.2017 Issue No: DSE-0001613 Rev.4
www.everlight.com
Application Restrictions
High reliability applications such as military/aerospace, automotive safety/security systems,
and medical equipment may require different product. If you have any concerns, please contact
Everlight before using this product in your application. This specification guarantees the quality
and performance of the product as an individual component. Do not use this product beyond the
specification described in this document.
Ver.:4 Release Date:01/09/2017 狀態:Approved(正式發行)
 
DATASHEET
SMD B
19-217/G7C-BK2L2VY/3T
11
Copyright © 2010, Everlight All Rights Reserved. Release Date : 3.Jan.2017 Issue No: DSE-0001613 Rev.4
www.everlight.com
DISCLAIMER
1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification.
2. The product meets EVERLIGHT published specification for a period of twelve (12) months from date of
shipment.
3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values.
4. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in
these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from the use of the
product which does not comply with the absolute maximum ratings and the instructions included in these
specification sheets.
5. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any
form is prohibited without obtaining EVERLIGHTs prior consent.
6. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving
applications or any other application which can result in human injury or death. Please contact authorized
Everlight sales agent for special application request.
Ver.:4 Release Date:01/09/2017 狀態:Approved(正式發行)