1
PHASE-OUT
Voltage Selector SWG
https://www.schurter.com /PG04
Fuses
Voltage selector switch with fuseholder, 6 stages, step switch, panel mounting
Approvals and Compliances
Description
- Voltage Selector , with fuseholder , 6 stages
- Step switch
- For 5 x 20 mm or 6.3 x 32 mm fuse-links
- Solder terminals
References
Last order date: 31.12.2013
Technical Data
Ratings IEC: 6.3 A / 250 VAC; 50 Hz
␣ UL: 6.3 A / 250 VAC; 60 Hz
␣ CSA: 10 A / 250 VAC; 60 Hz
Mounting Panel Mount from front side
Fastening Screw-on mounting
Terminal Solder
Number of Stages 6
Lifetime 300 operating cycles (without load)
Degree of Protection IP 40
Shock-Safe Category PC2
Protection Class Suitable for appliances with protection
class II acc. to IEC 61140
Allowable Operation Tempe-
rature
-40 °C to 70 °C
Climatic Category 25/85/21 acc. to IEC 60068-1
Material: Socket Thermoplastic, black, UL 94V-0
Weight 20.4 g
Solderability 350 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 2
Resistance to Soldering Heat 350 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 2
Insulation Resistance > 10'000MΩ (500VDC; 1min)
Contact Resistance < 10 mΩ at 20 mV
Dielectric Strength > 2kVAC between L-N
> 4kVAC between L/N-PE
(1min; 50Hz)
Clearance and Creepage Di-
stance
> 3mm
> 8mm between L/N-PE
Resistance to Vibration acc. to IEC 60068-2-6, test Fc
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: SWG
Approval Logo Certificates Certification Body Description
UL Approvals UL UL File Number: E72661
CSA Approvals CSA CSA Certification Record: LR45945
SEMKO Approvals SEMKO Svenska Elektriska Materielkontrollanstalten
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to UL 508 Industrial control equipment
Designed according to CSA C22.2 no. 55 Fuseholder general requirements
2
PHASE-OUT
Voltage Selector
SWG https://www.schurter.com /PG04
Fuses
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information
technologyequipment.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
Dimension [mm] 47 mm
17.9 4
max. 9
46.5
21.4
35
ø 29.5
110
150
220
125
250
38
47
A)
A) Hole for M3
Panel mounting hole
3.4
38
±0.2
30
Diagrams
1
2
3
5
6
P
3
PHASE-OUT
Voltage Selector SWG
https://www.schurter.com /PG04
Fuses
All Variants
Letterings Order Number
Stage 1 Stage 2 Stage 3 Stage 4 Stage 5 Stage 6
110 125 150 200 220 250 0033.2500
␣␣␣␣␣␣0033.2514
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-
Check-SCHURTER
Fuse cape FEU has to be ordered separately:
0031.1663 for fuse 5 x 20 mm
0031.1661 for fuse 6.3 x 32 mm
(see required Accessory)
Packaging Unit 25 Pcs
Required Accessory
Description
Caps to FEU, FAU, FAC
Caps to Holder FEU, FEU (Med), FAU, FAC
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
13.12.2017
PHASE-OUT
