V.KHEIL 3/1/07
A
B
C
D
7
8
A
B
C
D
12
3
4
5
6
7
ELECTRONICS. NOT TO BE DISCLOSED
ON DEMAND, ON COMPLETI ON OF ORDERS ASSEMBLY
C-1-1542001-2
8
TO OTHERS. REPRODUCED OR USED FOR
OF TYCO. MUST BE RETURNED TO TYC O
DWG. NO.
27mm HEAT SINK
ANY PURPOSES EXCEP T AS AUTHORIZED
IN WRITING BY AN AUTHORIZED OFFICIAL
UNLESS OTHERWISE
SPECIFIED
..XX
.
DATE
DRAWN BY:
ENGINEER:
E.TAO 3/1/07
TITLE:
SIZE:
1.5:1
REV:
A
SCALE: PART NO: 1-1542001-2
A
SHEET:
.XXXX
PROJECTION
DIMENSONS ARE IN:
INCHES
FILENAME PROJECT
1 OF 1
.
TOLERANCES ARE:
ANGLES
.XXX
TNIRD ANGLE
SYSTEM
CONFIDEN TIAL PROPERTY OF TYCO
OR OTHER PURPOSES FOR WHICH LENT.
DO NOT SCALE
DATE MATERIAL:
FINISH:
SEE NOTE
SEE NOTE
1. MATERIAL:
HEAT SINK: ALUM. (BLACK ANODIZE)
CLIP: BLACK PEI (UL94-VO)
2. BEFORE THE HEATSINK APPLICATION, THE USER
SHOULD IDENTIFY THE SPECIFICATION OF MAXIMUM
LOAD ON THE BGA PACKAGE.
HEATSINK TORQUE SPECIFICATIONS CONVERTED TO FORCE.
BARE DIE PACKAGE:
1.5 POUND-FORCE INCH TORQUE = 7.5 POUND-FORCE
(0.17 NEWTON TORQUE = 33.36 NEWTON)
2.0 POUND-FORCE INCH TORQUE = 10.0 POUND-FORCE
(0.23 NEWTON METER TORQUE = 44.48 NEWTON)
FULL SIZE LID PACKAGE:
1.5 POUND-FORCE INCH TORQUE = 6.9 POUND-FORCE
(0.17 NEWTON TORQUE = 30.69 NEWTON)
2.0 POUND-FORCE INCH TORQUE = 9.3 POUND-FORCE
(0.23 NEWTON METER TORQUE = 41.37 NEWTON)
3. REMOVE CLIP WITH REMOVAL TOOL P/N: 1542616-1.
4. RoHS COMPLIANT AND CERTIFIED.
A
MAX.370
±.005.293
±.005.163
.095
1.376±.020
B
B
4-LEGS CLIP SIZE: 27mm
2PIN-FIN HEAT SINK:
1
3
1.376 DIA.
0.500 HT.
SECTION B-B
3/4 - 27 UNS -2A
THREAD 1.075
.500
DETAIL A
SCALE= 6X
.016±.002
ITEM DESCRIPTION QTY
1 MOUNTING CLIP 1
2HEAT SINK1
3INTERFACE1
CUSTOMER DRAWING
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Power ° C/W @
Ambient ° C/W @
200 LFM ° C/W @
400 LFM ° C/W @
600 LFM
5 Watts 12.44 7.13 5.19 3.85
10 Watts 11. 06 7. 11 5. 06 3. 68
15 Watts 10. 08 6. 93 4. 95 3. 60
REVISION(S)
LTR DESCRIPTION INIT APP'D
A E CR-07-004722 E.T 3/ 1/ 07 V . K 3/1/07
