145
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Miniature Aluminum Electrolytic Capacitors NRE-HS Series
Rated Voltage Range 6.3 ~ 50Vdc 160 ~ 250Vdc 350 ~ 450Vdc
Capacitance Range 100 ~ 10,000μF 4.7 ~ 220μF 1.5 ~ 68μF
Operating Temperature Range -55 ~ +105°C -40 ~ +105°C -25 ~ +105°C
Capacitance Tolerance ±20%(M)
Max. Leakage Current @ 20°C
6.3 ~ 50Vdc 160 ~ 450Vdc
0.01CV or 3μA
whichever is greater
after 2 minutes
CV<1,000μF CV>1,000μF
0.1CV + 40μA (1 min.) 0.04CV + 100μA (1 min.)
.03CV + 15μA (5 min.) 0.02CV + 25μA (5 min.)
Max. Tan δ @
120Hz/20°C
W.V. (Vdc) 6.3 10 16 25 35 50 160 200 250 350 400 450
S.V. (Vdc) 8.0 13 20 32 44 63 200 250 300 400 450 500
C<1,000μF0.30 0.26 0.20 0.18 0.14 0.12 0.20 0.20 0.20 0.20 0.20 0.25
W.V. (Vdc) 6.3 10 16 25 35 50 160 200 250 350 400 450
C<1,000μF0.26 0.22 0.18 0.16 0.14 0.12 0.20 0.20 0.20 0.20 0.20 0.25
C=2,000μF0.28 0.24 0.20 0.18 0.16 014 - - - - - -
C=3,300μF0.30 0.26 0.22 0.20 0.18 - - - - - - -
C=4,700μF0.32 0.28 0.24 0.22 - - - - - - - -
C=6,800μF0.36 0.32 0.28 - - - - - - - - -
C=10,000μF0.44 0.40 - - - - - - - - - -
Low Temperature
Stability Inpedance
Ratio @ 120Hz
W.V. (Vdc) 6.3 10 16 25 35 50 160 200 250 350 400 450
Z-25°C/Z+20°C 4 3 2 2 2 2 3 3 3 6 6 6
Z-40°C/Z+20°C 8 6 4 4 3 3 - - - - - -
Load Life Test
at Rated W.V.
+105°C 2,000 Hours
Capacitance Change Within ±25% of initial measured value
Tan δLess than 200% of specifi ed maximum value
Leakage Current Less than specifi ed maximum value
HIGH CV, HIGH TEMPERATURE ,RADIAL LEADS, POLARIZED
FEATURES
• EXTENDED VALUE AND HIGH VOLTAGE
• NEW REDUCED SIZES
CHARACTERISTICS
Cap.
(μF) Code Working Voltage (Vdc)
6.3 10 16 25 35 50 160 200 250 350 400 450
1.51R5-----------8x9
2.22R2----------8x910x9
3.33R3---------8x910x9 -
4.7 4R7 - - - - - - 8x9 8x9 8x9 10x9 10x9 -
6.8 6R8 - - - - - - 8x9 8x9 10x9 12.5x16 12.5x16 12.5x16
10 100 - - - - - - 10x9 10x9 - 12.5x16 12.5x16 16x16
22220-------12.5x16 12.5x16 18x16 16x20 16x20
33 330 - - - - - - 12.5x16 12.5x16 16x16 16x20 16x20 18x25
47 470 - - - - - - 16x16 16x16 18x16 18x20 18x20 18x25
68 680 - - - - - - 18x16 16x20 16x20 18x25 - -
100 101 - - - - - 8x9 16x20 16x20 18x25 - - -
150 151 - - - - 8x9 10x9 18x20 18x25 - - - -
220 221 - - - 8x9 10x9 - 18x25 - - - - -
330 331 - - 8x9 10x9 10x9 -------
470 471 8x9 8x9 8x9 10x9 - 12.5x16 - - - - - -
680 681 8x9 10x9 10x9 12.5x16 12.5x16 16x16 - - - - - -
1000 102 10x9 10x9 - 12.5x16 16x16 16x20 - - - - - -
2200 222 12.5x16 12.5x16 16x16 16x20 18x20 18x25 - - - - - -
3300 332 16x16 16x16 16x20 18x20 18x25 -------
4700 472 18x16 16x20 18x20 18x25 --------
6800 682 16x20 18x20 18x25 ---------
10000 103 18x20 18x25 - ---------
8 ~ 1012 ~ 18
Case Diameter
LEAD SPACING AND DIAMETER (mm)
Case Dia. (Dφ)8 10 12.5 16 18
Lead Dia. (dφ)0.6 0.6 0.6 0.8 0.8
Lead Spacing (F) 3.5 5.0 5.0 7.5 7.5
Dim. α0.5 0.5 0.5 0.5 0.5
STANDARD PRODUCT AND CASE SIZE TABLE Dφ x L (mm)
*See Part Number System for Details
P N bS fD il
RoHS
Compliant
includes all homogeneous materials
146
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Miniature Aluminum Electrolytic Capacitors NRE-HS Series
Part Number Cap.
(μF)
W.V.
(Vdc)
Dissipation Factor
+20°C/120Hz
Ripple Current Rating (mA)
+105°C/120Hz
Load Life Hours
@+105°C
NRE-HS471M6.3V8x9F 470
6.3
0.30 270 2,000
NRE-HS681M6.3V8x9F 680 0.30 300 2,000
NRE-HS102M6.3V10x9F 1000 0.30 460 2,000
NRE-HS222M6.3V12.5x16F 2200 0.28 770 2,000
NRE-HS332M6.3V16x16F 3300 0.30 930 2,000
NRE-HS472M6.3V18x16F 4700 0.32 1000 2,000
NRE-HS682M6.3V16x20F 6800 0.36 1200 2,000
NRE-HS103M6.3V18x20F 10000 0.44 1430 2,000
NRE-HS471M10V8x9F 470
10
0.26 295 2,000
NRE-HS681M10V10x9F 680 0.26 350 2,000
NRE-HS102M10V10x9F 1000 0.26 460 2,000
NRE-HS222M10V12.5x16F 2200 0.24 770 2,000
NRE-HS332M10V16x16F 3300 0.26 930 2,000
NRE-HS472M10V16x20F 4700 0.28 1200 2,000
NRE-HS682M10V18x20F 6800 0.32 1330 2,000
NRE-HS103M10V18x25F 10000 0.40 1680 2,000
NRE-HS331M16V8x9F 330
16
0.20 270 2,000
NRE-HS471M16V8x9F 470 0.20 310 2,000
NRE-HS681M16V10x9F 680 0.20 370 2,000
NRE-HS222M16V16x16F 2200 0.20 930 2,000
NRE-HS332M16V16x20F 3300 0.22 1200 2,000
NRE-HS472M16V18x20F 4700 0.24 1330 2,000
NRE-HS682M16V18x25F 6800 0.28 1680 2,000
NRE-HS221M25V8x9F 220
25
0.18 240 2,000
NRE-HS331M25V10x9F 330 0.18 310 2,000
NRE-HS471M25V10x9F 470 0.18 370 2,000
NRE-HS681M25V12.5x16F 680 0.16 640 2,000
NRE-HS102M25V12.5x16F 1000 0.16 670 2,000
NRE-HS222M25V16x20F 2200 0.18 1100 2,000
NRE-HS332M25V18x20F 3300 0.20 1200 2,000
NRE-HS472M25V18x25F 4700 0.22 1490 2,000
NRE-HS151M35V8x9F 150
35
0.14 250 2,000
NRE-HS221M35V10x9F 220 0.14 300 2,000
NRE-HS331M35V10x9F 330 0.14 360 2,000
NRE-HS681M35V12.5x16F 680 0.14 640 2,000
NRE-HS102M35V16x16F 1000 0.14 850 2,000
NRE-HS222M35V18x20F 2200 0.16 1200 2,000
NRE-HS332M35V18x25F 3300 0.18 1490 2,000
NRE-HS101M50V8x9F 100
50
0.12 200 2,000
NRE-HS151M50V10x9F 150 0.12 300 2,000
NRE-HS471M50V12.5x16F 470 0.12 570 2,000
NRE-HS681M50V16x16F 680 0.12 710 2,000
NRE-HS102M50V16x20F 1000 0.12 890 2,000
NRE-HS222M50V18x25F 2200 0.14 1320 2,000
NRE-HS4R7M160V8x9F 4.7
160
0.20 54 2,000
NRE-HS6R8M160V8x9F 6.8 0.20 60 2,000
NRE-HS100M160V10x9F 10 0.20 85 2,000
NRE-HS330M160V12.5x16F 33 0.20 175 2,000
NRE-HS470M160V16x16F 47 0.20 245 2,000
NRE-HS680M160V18x16F 68 0.20 305 2,000
NRE-HS101M160V16x20F 100 0.20 381 2,000
NRE-HS151M160V18x20F 150 0.20 464 2,000
NRE-HS221M160V18x25F 220 0.20 602 2,000
NRE-HS4R7M200V8x9F 4.7
200
0.20 54 2,000
NRE-HS6R6M200V8x9F 6.8 0.20 60 2,000
NRE-HS100M200V10x9F 10 0.20 85 2,000
NRE-HS220M200V12.5x16F 22 0.20 156 2,000
NRE-HS330M200V12.5x16F 33 0.20 175 2,000
NRE-HS470M200V16x16F 47 0.20 250 2,000
NRE-HS680M200V16x20F 68 0.20 355 2,000
NRE-HS101M200V16x20F 100 0.20 381 2,000
NRE-HS151M200V18x25F 150 0.20 532 2,000
STANDARD VALUES, SPECIFICATIONS AND CASE SIZES (mm)
147
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Frequency (Hz) 60 120 500 1K 10K >
1.5 ~ 6.8μF0.65 1.00 1.20 1.30 1.50
10 ~ 68μF0.80 1.00 1.20 1.30 1.50
100 ~ 1000μF0.80 1.00 1.10 1.15 1.20
2200 ~ 10000μF0.80 1.00 1.05 1.10 1.15
RIPPLE CURRENT FREQUENCY
CORRECTION FACTORS
Part Number Cap.
(μF)
W.V.
(Vdc)
Dissipation Factor
+20°C/120Hz
Ripple Current Rating (mA)
+105°C/120Hz
Load Life Hours
@+105°C
NRE-HS4R7M250V8x9F 4.7
250
0.20 54 2,000
NRE-HS6R8M250V10x9F 6.8 0.20 69 2,000
NRE-HS220M250V12.5x16F 22 0.20 156 2,000
NRE-HS330M250V16x16F 33 0.20 238 2,000
NRE-HS470M250V18x16F 47 0.20 309 2,000
NRE-HS680M250V16x20F 68 0.20 397 2,000
NRE-HS101M250V18x25F 100 0.20 451 2,000
NRE-HS3R3M350V8x9F 3.3
350
0.20 37 2,000
NRE-HS4R7M350V10x9F 4.7 0.20 49 2,000
NRE-HS6R8M350V12.5x16F 6.8 0.20 94 2,000
NRE-HS100M350V12.5x16F 10 0.20 100 2,000
NRE-HS220M350V18x16F 22 0.20 183 2,000
NRE-HS330M350V16x20F 33 0.20 238 2,000
NRE-HS470M350V18x20F 47 0.20 309 2,000
NRE-HS680M350V18x25F 68 0.20 397 2,000
NRE-HS2R2M400V8x9F 2.2
400
0.20 35 2,000
NRE-HS3R3M400V10x9F 3.3 0.20 40 2,000
NRE-HS4R7M400V10x9F 4.7 0.20 49 2,000
NRE-HS6R8M400V12.5x16F 6.8 0.20 94 2,000
NRE-HS100M400V12.5x16F 10 0.20 100 2,000
NRE-HS220M400V16x20F 22 0.20 187 2,000
NRE-HS330M400V16x20F 33 0.20 238 2,000
NRE-HS470M400V18x20F 47 0.20 309 2,000
NRE-HS1R5M450V8x9F 1.5
450
0.25 19 2,000
NRE-HS2R2M450V10x9F 2.2 0.25 29 2,000
NRE-HS6R8M450V12.5x16F 6.8 0.25 77 2,000
NRE-HS100M450V16x16F 10 0.25 109 2,000
NRE-HS220M450V16x20F 22 0.25 170 2,000
NRE-HS330M450V18x25F 33 0.25 238 2,000
NRE-HS470M450V18x25F 47 0.25 275 2,000
Miniature Aluminum Electrolytic Capacitors NRE-HS Series
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specifi c application - process details with
NIC’s technical support personnel: tpmg@niccomp.com
STANDARD VALUES, SPECIFICATIONS AND CASE SIZES (mm)
NRE-HS 331 M 35V 10X9 TB F...
RoHS Compliant
TB = Tape & Box*
Case Size (Dφ x L)
Working Voltage (Vdc)
Tolerance Code (M=20%)
Capacitance Code: First 2 characters
signifi cant, third character is multiplier
Series
PART NUMBER SYSTEM
*see taping specifi cations for details
β max. L< 16mm = 1.5mm, L> 20mm = 2.0mm
DIMENSIONS (mm)
dφ ± 0.05
Insulation Sleeve
F ± 0.5
Dφ ± α
4mm
Min.
15mm Min.
L + β max.
Polarity Marking
Drawing is representative of parts as supplied in bulk or
straight lead format, please see taping specifi cation for details
on taped format packaging.
-
+
198 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Miniature Aluminum Electrolytic Capacitors Taping Specifi cations
Taping Dimensions (mm)
Taping Dimensions (mm)
NOTE: ANODE (+) LEAD FEEDS OFF FIRST.
FOR OPTION OF NEGATIVE (
_) LEAD FIRST,
SPECIFY “TBN”.
STANDARD RADIAL TAPING (5mm LEAD SPACING, FORMED LEADS) TB
Case Dia.
(Dφ)10 12.5
Case Size All All
Dim.
dφ ±0.05 0.6 0.6
H ±0.75 19.0 19.0
F +0.8 ~ -0.2 5.0 5.0
P ±1.0 25.4*
P012.7 ±0.2
P13.85
P26.35 ±1.0
W 18.0 ±0.5
W011.5 min
W19.0 ±0.5
W20 ~ 2.5
H016.0 ±0.5
I 1.0 max.
D0φ4.0 ±0.2
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
*Optional Taping Specifi cations
10mm diameter available with P dim. = 12.7mm
(P/N Suffi x: TB12.7MMP)
12.5mm diameter available with P dim. = 15mm, P1= 5.0mm,
P0 = 15.0mm & P2 = 7.5mm (P/N Suffi x: TB15MMP)
Case Dia.
(Dφ)4 5 6.3 8
Case Size 4x5
4x7 5x5
5x7 5x11 6.3x5
6.3x7 6.3x11 8x11.5
Dim.
dφ ±0.05 0.45 0.45 0.5 0.45 0.5 0.6
H ±0.75 17.5 17.5 18.5 17.5 18.5 20.0
F +0.8 ~ -0.2 5.0 -02 ~ +0.8
P 12.7 ±1.0
P012.7 ±0.2
P13.85 ±0.5 (at end of tape)
P26.35 ±1.0
W 18.0 ±0.5
W011.5 min.
W19.0 ±0.5
W20 ~ 2.5
H016.0 ±0.5
I 1.0 max.
D0φ4.0 ±0.2
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
STANDARD RADIAL TAPING (5mm LEAD SPACING, STRAIGHT LEADS) TB
P2P
∅D
P1
w2
w0
w
0
P0
F
S∅D0
∅dWH
H0
1max
t
Δh
1max
t
Δh
P2P
∅D
P1
w2
w0
w
0
P0
F
S∅D0
∅dW1H
199
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Taping Dimensions (mm) SPECIAL STRAIGHT LEAD TAPING TBST
SPECIAL RADIAL TAPING (2.5mm LEAD SPACING, FORMED LEADS) TBF1
Case Dia.
(Dφ)4 5 6.3 8
Case Size 4x5
4x7 5x5
5x7 5x11 6.3x5
6.3x7 6.3x11 8x11.5
Dim.
dφ ±0.05 0.45 0.45 0.5 0.45 0.5 0.6
H ±0.75 17.5 17.5 18.5 17.5 18.5 20.0
F +0.8 ~ -0.2 2.0* 2.0 2.0 2.5 2.5 3.5
P ±1.0 12.7 ±0.2
P012.7 ±0.2
P15.1 5.1 5.1 5.1 5.1 4.6
P26.35 ±1.0
W 18.0 ±0.5
W011.5 min.
W19.0 ±0.5
W20 ~ 2.5
H016.0 ±0.5
I 1.0 max.
D0φ4.0 ±0.2
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
* Parts with 4mm diameter are taped with a slight fl are in the
lead and a 2.0mm lead-space.
Miniature Aluminum Electrolytic Capacitors Taping Specifi cations
Case Dia.
(Dφ)45
Case Size 4x5
4x7 5x5
5x7 5x11
Dim.
dφ ±0.05 0.45 0.45 0.5
H ±0.75 17.5 17.5 18.5
H0 ±0.5 16.0 - -
F 2.5 -02 ~ +0.8
P 12.7 ±1.0
P012.7 ±0.2
P15.1 ±0.5
P26.35 ±1.0
W 18.0 ±0.5
W011.5 min.
W19.0 ±0.5
W20 ~ 1.5
I 1.0 max.
D0φ4.0 ±0.2
Δh 0 ±1.0
t 0.7 ±0.2
Taping Dimensions (mm)
1max
t
Δh
P2P
∅D
P1
w2
w0
w
0
P0
F
S∅D0
∅dW1H
P2P
∅D
P1
w2
w0
w
0
P0
F
S∅D0
∅dWH
1max
t
Δh
H0
200 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Miniature Aluminum Electrolytic Capacitors
RADIAL TAPED PACKAGING
Taping Specifi cations
Ammo Box (Tape & Box) TB, TBF1, TBST
Size of box and component quantity
*Special Taping Consult Factory For Availability
Ammo Box Dimensions (mm)
Scored corner
L
H
W
Label ⊕
-
Case Dia (Dφ)
or Case Size Q'ty per
Box
(pcs) Dim. L Dim. H Dim.
W
4x5, 4x7 2,000 331 175 43
5x5, 5x7 2,000 331 220 43
5x11 2,000 340 255 55
6.3x5, 6.3x7 2,000 331 280 43
6.3x11 2,000 331 280 48
8x11.5, 8x12.5 1,000 335 235 53
10x12.5* 500 335 190 53
10x16* 500 335 300 53
10x20* 500 335 300 55
12.x20* 500 335 300 55
12.5x25* 500 335 300 61
