SPEC NO: DSAD0152 REV NO: V.4 DATE: NOV/19/2005 PAGE: 1 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
P/N: KPSC03-103 YELLOW
Description
The Yellow source color devices are made with Gallium
Arsenide Phosphide on Gallium Phosphide Yellow Light
Emitting Diode.
Package Dimensions & Internal Circuit Diagram
SURFACE MOUNT DISPLAY
Features
0.3 INCH DIGIT HEIGHT.
LOW CURRENT OPERATION.
EXCELLENT CHARACTER APPEARANCE.
I.C. COMPATIBLE.
MECHANICALLY RUGGED.
GRAY FACE,WHITE SEGMENT.
PACKAGE : 550PCS / REEL.
RoHS COMPLIANT.
SPEC NO: DSAD0152 REV NO: V.4 DATE: NOV/19/2005 PAGE: 2 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI
Selection Guide
Part No. Dice Lens Type Iv (ucd)
@ 10mA
Min. Typ.
KPSC03-103 YELLOW (GaAsP/GaP) WHITE DIFFUSED 480 2290 Common Cathode,Rt.
Hand Decimal.
Description
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Yellow 590 nm IF=20mA
λDDominant Wavelength Yellow 588 nm IF=20mA
∆λ1/2 Spectral Line Half-width Yellow 35 nm IF=20mA
C Capacitance Yellow 20 pF VF=0V;f=1MHz
VFForward Voltage Yellow 2.1 2.5 V IF=20mA
IRReverse Current Yellow 10 uA VR = 5V
Parameter Yellow Units
Power dissipation 105 mW
DC Forward Current 30 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
SPEC NO: DSAD0152 REV NO: V.4 DATE: NOV/19/2005 PAGE: 3 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI
Yellow KPSC03-103
SPEC NO: DSAD0152 REV NO: V.4 DATE: NOV/19/2005 PAGE: 4 O F 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI
KPSC03-103
Recommended Soldering Pattern
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Tape Specifications
(Units : mm)
