Power TOPLED Enhanced thin film LED Lead (Pb) Free Product - RoHS Compliant LA E67F, LY E67F Besondere Merkmale * Gehausetyp: weies P-LCC-4 Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: mehr Licht durch erhohten optischen Wirkungsgrad * Wellenlange: 617 nm (amber), 590 nm (gelb) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaAlP * optischer Wirkungsgrad: 62 lm/W (amber), 47 lm/W (yellow) * Gruppierungsparameter: Lichtstarke, Durchflussspannung, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8 mm Gurt mit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * Erweiterte Korrosionsfestigkeit: Details siehe Seite 9 Features * package: white P-LCC-4 package, colorless clear resin * feature of the device: more light due to higher optical efficiency * wavelength: 617 nm (amber), 590 nm (yellow) * viewing angle: Lambertian Emitter (120) * technology: InGaAlP * optical efficiency: 62 lm/W (amber), 47 lm/W (yellow) * grouping parameter: luminous intensity, forward voltage, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 2000/reel, o180 mm or 8000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D * Superior Corrosion Robustness: details see page 9 Anwendungen * Ampelanwendung * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung) * Innen- und Auenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung und Bremslichter) * Ersatz von Kleinst-Gluhlampen * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Signal- und Symbolleuchten Applications * traffic lights * backlighting (LCD, switches, keys, displays, illuminated advertising) * interior and exterior automotive lighting (e.g. dashboard backlighting and brake lights) * substitution of micro incandescent lamps * marker lights (e.g. steps, exit ways, etc.) * signal and symbol luminaire 2009-12-07 1 LA E67F, LY E67F Bestellinformation Ordering Information Typ Type Emissionsfarbe Lichtstarke1) Lichtstrom2) Seite 15 Seite 15 Color of Emission Luminous Intensity1) Luminous Flux2) Bestellnummer Ordering Code page 15 page 15 IF = 50 mA IV (mcd) IF = 50 mA V (mlm) LA E67F-BACA-24-3B5A amber 1800 ...3550 8000 (typ.) Q65110A9089 LA E67F-BACA-24-3A4B amber 1800 ...3550 8000 (typ.) Q65110A9090 LY E67F-AABA-35-1 yellow 1120 ...2240 5040 (typ.) Q65110A9019 LY E67F-ABBB-46-1 yellow 1400 ...2800 6300 (typ.) Q65110A9018 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LA E67F-BACA-24-3A5A bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen BA, BB oder CA enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LA E67F-BACA-24-3A5A bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Durchlassspannungsgruppe geliefert. Z.B.: LA E67F-BACA-24-3A5A bedeutet, dass nach Durchlassspannung gruppiert wird. Auf einem Gurt ist nur eine der Durchlasspannungsgruppen -3B, -4A, -4B oder -5A enthalten (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LA E67F-BACA-24-3A5A means that only one group BA, BB or CA will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LA E67F-BACA-24-3A5A means that only 1 wavelength group -2, -3, or -4 will be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 5 for explanation). In a similar manner for LED, where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any one reel. E.g. LA E67F-BACA-24-3A5A means that only 1 forward voltage group -3B, -4A, 4B or -5A will be shippable. In order to ensure availability, single forward voltage groups will not be orderable (see page 5 for explanation) 2009-12-07 2 LA E67F, LY E67F Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current (TA=25C) IF 70 mA Stostrom Surge current t 10 s, D = 0.1, TA=25C IFM 0.1 A Sperrspannung3) Seite 15 Reverse voltage3) page 15 (TA=25C) VR 12 V Rth JA 300 K/W Rth JS 130 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 15 Junction/ambient4) page 15 Sperrschicht/Lotpad Junction/soldering point 2009-12-07 3 LA E67F, LY E67F Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit LA LY 624 593 nm 617* 590* nm -5/+7 -7/+5 18 18 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) (typ.) 2 Viewing angle at 50 % IV 120 120 Grad deg. Durchlassspannung6) Seite 15 Forward voltage6) page 15 IF = 50 mA (min.) VF (typ.) VF (max.) VF 1.90* 2.15 2.65 2.05* 2.30 2.65 V V V Sperrstrom Reverse current VR = 12 V (typ.) IR (max.) IR 0.2 10 0.2 10 A A Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 50 mA (typ.) peak dom Dominantwellenlange5) Seite 15 Dominant wavelength5) page 15 IF = 50 mA Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 50 mA (typ.) Temperaturkoeffizient von peak Temperature coefficient of peak IF = 50 mA; -10C T 100C (typ.) TCpeak 0.14 0.12 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 50 mA; -10C T 100C (typ.) TCdom 0.07 0.10 nm/K Optischer Wirkungsgrad Optical efficiency IF = 50 mA (typ.) opt 62 47 lm/W * Einzelgruppen siehe Seite 5 Individual groups on page 5 2009-12-07 4 LA E67F, LY E67F Wellenlangengruppen (Dominantwellenlange)5)Seite 15 Wavelength Groups (Dominant Wavelength)5) page 15 Gruppe Group amber yellow min. Einheit Unit min. max. max. 2 612 616 3 616 620 583 586 nm 4 620 624 586 589 nm 5 589 592 nm 6 592 595 nm nm Durchlassspannungsgruppen 6) Seite 15 Forward Voltage Groups 6) page 15 Gruppe Group amber yellow min. Einheit Unit min. max. max. 3A 1.90 2.05 3B 2.05 2.20 2.05 2.20 V 4A 2.20 2.35 2.20 2.35 V 4B 2.35 2.50 2.35 2.50 V 5A 2.50 2.65 2.50 2.65 V V Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group Lichtstarke1) Seite 15 Luminous Intensity1) page 15 IV (mcd) AA AB BA BB CA Anm.: Note: 1120 ... 1400 ... 1800 ... 2240 ... 2800 ... 1400 1800 2240 2800 3550 Lichtstrom2) Seite 15 Luminous Flux2) page 15 V (mlm) 3700 4800 6050 7550 9500 (typ.) (typ.) (typ.) (typ.) (typ.) Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus wenigen Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. The standard shipping format for serial types includes a family group of only a few individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: AB-3-4A Example: AB-3-4A Helligkeitsgruppe Brightness Group Wellenlange Wavelength Durchlassspannung Forward Voltage AB 3 4A Anm.: Note: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. No packing unit / tape ever contains more than one group for each selection. 2009-12-07 5 LA E67F, LY E67F Relative spektrale Emission2) Seite 15 Relative Spectral Emission2) page 15 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 50 mA OHL00013 100 % Irel 80 V 60 yellow amber 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik2) Seite 15 Radiation Characteristic2) page 15 Irel = f (); TA = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2009-12-07 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LA E67F, LY E67F Durchlassstrom2) Seite 15 Forward Current2) page 15 IF = f (VF); TA = 25 C Relative Lichtstarke2) 7) Seite 15 Relative Luminous Intensity2) 7) page 15 IV/IV(50 mA) = f (IF); TA = 25 C OHL04150 10 2 mA IF OHL04151 10 2 IV I V (50 mA) 10 1 5 yellow amber 10 0 10 1 5 10 -1 5 10 0 1.5 1.7 1.9 2.1 10 -2 10 0 2.3 V 2.5 5 10 1 mA 10 2 IF VF Relative Vorwartsspannung2) Seite 15 Relative Forward Voltage2) page 15 VF = VF - VF(25 C) = f (Tj); IF = 50 mA 0.25 V Relative Lichtstarke2) Seite 15 Relative Luminous Intensity2) IV/IV(25 C) = f (Tj); IF = 50 mA OHL02667 page 15 OHL04152 2.5 IV IV (25 C) VF 2.0 0.15 yellow 0.1 1.5 0.05 0 1.0 amber -0.05 -0.1 0.5 -0.15 -0.2 -60 -40 -20 0 0 -60 -40 -20 0 20 40 60 C 100 Tj 2009-12-07 20 40 60 C 100 Tj 7 LA E67F, LY E67F Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f ( T) OHL01413 80 mA IF 70 60 TA TS 50 40 30 20 A temp. ambient S temp. solder point 10 0 0 20 40 60 80 C 100 T Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C OHL02046 0.12 D= IF A D= IF A 0.005 0.01 0.02 0.05 0.10 OHL02045 0.12 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.10 0.08 0.08 D= 0.06 0.04 0.02 0.06 0.1 0.2 0.5 1 tP D= T 0.04 tP 0.02 IF T D= T tP IF T 0 10-5 10-4 10-3 10-2 10-1 100 101 s 102 0 10-5 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2009-12-07 tP 8 LA E67F, LY E67F Mazeichnung8) Seite 15 Package Outlines8) page 15 2.1 (0.083) 3.0 (0.118) 2.6 (0.102) 2.3 (0.091) 2.1 (0.083) A C Package marking 0.5 (0.020) 1.1 (0.043) A 3.7 (0.146) 3.3 (0.130) 41 A 0.1 (0.004) (typ.) 3.4 (0.134) 3.0 (0.118) 0.6 (0.024) 0.9 (0.035) 0.7 (0.028) (2.4) (0.095) 0.8 (0.031) 1.7 (0.067) 0.6 (0.024) 0.4 (0.016) A A A C 0.18 (0.007) 0.12 (0.005) GPLY6084 Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Gewicht / Approx. weight: 35 mg Gurtung / Polaritat und Lage8) Seite 15 Verpackungseinheit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Packing unit 2000/reel, o180 mm or 8000/reel, o330 mm 2.9 (0.114) 4 (0.157) 2009-12-07 9 Cathode/Collector Marking 8 (0.315) 2 (0.079) 1.75 (0.069) 4 (0.157) 3.5 (0.138) 1.5 (0.059) 3.6 (0.142) Method of Taping / Polarity and Orientation8) page 15 OHAY0667 LA E67F, LY E67F Empfohlenes Lotpaddesign verwendbar fur TOPLED und Power TOPLED Reflow Loten8) Seite 15 Recommended Solder Pad useable for TOPLED and Power TOPLED Reflow Soldering8) page 15 Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Padgeometrie fur verbesserte Warmeableitung 3.3 (0.130) Paddesign for improved heat dissipation 3.3 (0.130) Anode 2.3 (0.091) 11.1 (0.437) 1.5 (0.059) 1.1 (0.043) 3.7 (0.146) 0.8 (0.031) 0.7 (0.028) Kathode/ Cathode Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Cu Flache / <_ 16 mm 2 per pad Cu-area Lotstoplack Solder resist Empfohlenes Lotpaddesign8) Seite 15 Recommended Solder Pad8) page 15 OHLPY440 Wellenloten (TTW) TTW Soldering Anode Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. 2 (0.079) 6.1 (0.240) Bewegungsrichtung der Platine PCB-direction 1 (0.039) 2 (0.079) 2 (0.079) 3 (0.118) 6 (0.236) 2.8 (0.110) 2.8 (0.110) Padgeometrie fur verbesserte Warmeableitung 0.5 (0.020) Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Paddesign for improved heat dissipation Kathode/ Cathode Cu Flache / > 16 mm 2 per pad Cu-area Lotstoplack Solder resist OHAY1583 2009-12-07 10 LA E67F, LY E67F Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2009-12-07 11 s 250 LA E67F, LY E67F Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: pl e Semiconductors RoHS Compliant ML Temp ST 2 260 C RT (6P) BATCH NO: Batch Number Bar Code Additional TEXT (9D) D/C: Date Code Sa m (1T) LOT NO: Lot Number R077 Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel DEMY PACKVAR: Packing Type (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 2009-12-07 12 LA E67F, LY E67F Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs nta d ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co is UR ce 24 6 da e y MI 40 be tim h C e ThISTSE l pro < tor tim or ). 23 tim e at t wilntC or l wit fac MO Flo tim TO s at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da ure ba ed low ba Le ve mo % ba e al d ure Le ist en ref e e 10 tim ure se for ist ale op se for > Mo , se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in Flo RH g, r-p bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo O S R A M N TIO U A C Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials (6 P) P -1 +Q -1 D/ C: 20 00 (9 D) LO T (1 T) NO : (X ) PR OD 5 14 2 110 0 (Q )Q TY : ic S R NO : O em S BA TC H 2100 Y M DE -1 18 8 01 C: 99 D/ TY : O SR AM 20 00 21 D) 00 (9 21 : 34 )Q (Q ic 5 S NO O 12 H em H S TC (X ) PR OD NO : (1 T) 11 00 LO T 14 2 NO (6 P) : 12 BA 3G R A on M du O p ct to or s 44 (G ) GR OU P: P -1 +Q R u L lt S iT Y O T67 P L 6 Muster E Bi D Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: MO TO OP M 01 44 8 2199 A on M du O p ct to or s . RH % /60 C R 18 T6 P 76 LE . H) (R e 3G H 12 34 y dit mi ag NO : 12 nk, bla cod bar d GR OU P: M ul LS ti Y TO el see lab e If hu ive _ < s ur s ). ur s Ho de ur s Ho co 72 Ho ur te 48 e Ho 24 6 da e tim e th tim or ). 23 tim e at t wi ntC or l wi fac Flo tim s at or e. ca at Flo tha ale el or ur nth nti Flo uiv if: read es ed l 4 5 Flo lab mo ide eq low g, l oc ve vic is be or de 24 tin en l 5a6 pr ve Le de e te co , w, g: ve l un wh e Le ke r se da ur e ba ed flo Le ve mo % ba e ba al d ur e Le ist en re e 10 e tim ur e se for ist ale op se for > , Mo se ist ur is or . , is ha 33 se Mo nk be ist nk rd g -0 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. wi 10 ba tor J-S thi va p. elf Ye ar ks s _ < me 1 Ye ee ur d, C ire icat Sh ter w, tem ted at > 1 W Ho un Af flody qu Indno ire DE 1. e 4 8 re ed re y is qu JE 2. bo e Mo or tim 16 re C/ : e es dit2b a) St tim or mi ed or g is IP tim e vic b) or Hu Flo en tim or De 2a kin ce te Flo a) op or 3. b) ba en Flo da e fer l 1 2 Flo If al re tim ve l 4. se d l 2a3 ve Le g an ve l e Le Ba te ur e Le ve ur e Le ist Da ur e ist Mo ist ur Mo ist Mo Mo (G ) Muster L VE LE re lat ra ck re 30 N s IVE RS inf pa % k ainIT TO of to 90 ea d ntNSUC < ns (p TIO or d , cteg itio U g coSEND an bje C sin nd 5 C su es CO Ais baRE co y 40 be oc TU MI CThIS C < tor ll pr SE DE MY Barcode label D Bi Bin1 Bi n2 : Pn3 : Q- 1ML : 1- 20 20 2 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label Packing Sealing label OHA02044 Dimensions of transportation box in mm (inch) Breite / Width Lange / length Hohe / height 200 5 (7,874 0,1968) 200 5 (7,874 0,1968) 30 5 (1,1811 0,1968) 352 5 (13,858 0,1968) 352 5 (13,858 0,1968) 33 5 (1,3 0,1968) 2009-12-07 13 LA E67F, LY E67F Revision History: 2009-12-07 Previous Version: 2009-03-27 Page Subjects (major changes since last revision) Date of change 2, 5 new ordering code 2007-10-05 2 change of product description (forward voltage groups" 2008-06-02 14 laser warning removed; new classification regarding CIE S009/E:2002 ("photobiological safety of lamps and lamp systems")IEC 62471 (1st edition 2006-07). 2008-09-04 all LY E67F added 2009-03-27 1, 9 additional information 2009-12-07 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components9) page 15 may only be used in life-support devices or systems10) page 15 with the express written approval of OSRAM OS. 2009-12-07 14 LA E67F, LY E67F Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 4) RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm2 je Pad) 5) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. 6) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,05 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1 8) Mae werden wie folgt angegeben: mm (inch) 9) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 10) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) 3) 4) 5) 6) 2009-12-07 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 8) Dimensions are specified as follows: mm (inch) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 15 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 16 mm2 per pad) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.05 V. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.