Absolute Maximum Ratings
Parameter Units
ID @ VGS = 0V, TC = 25°C Continuous Drain Current -11
ID @ VGS = 0V, TC = 100°C Continuous Drain Current -7.0
IDM Pulsed Drain Current -50
PD @ TC = 25°C Max. Power Dissipation 75 W
Linear Derating Factor 0.60 W/°C
VGS Gate-to-Source Voltage ±20 V
EAS Single Pulse Avalanche Energy 81 mJ
IAR Avalanche Current -11 A
EAR Repetitive Avalanche Energy 7.5 mJ
dv/dt Peak Diode Recovery dv/dt -5.5 V/ns
TJOperating Junction -55 to 150
TSTG Storage Temperature Range
Lead Temperature 300 (0.063 in. (1.6mm) from case for 10s)
Weight 11.5 (typical) g
PD - 90549C
oC
A
01/22/01
www.irf.com 1
Product Summary
Part Number BVDSS RDS(on) ID
IRF9130 -100V 0.30 -11A
For footnotes refer to the last page
The HEXFETtechnology is the key to International
Rectifiers advanced line of power MOSFET transistors.
The efficient geometry and unique processing of this latest
“State of the Art” design achieves: very low on-state resis-
tance combined with high transconductance; superior re-
verse energy and diode recovery dv/dt capability.
The HEXFET transistors also feature all of the well estab-
lished advantages of MOSFETs such as voltage control,
very fast switching, ease of parelleling and temperature
stability of the electrical parameters.
They are well suited for applications such as switching
power supplies, motor controls, inverters, choppers, audio
amplifiers and high energy pulse circuits.
Features:
nRepetitive Avalanche Ratings
nDynamic dv/dt Rating
nHermetically Sealed
nSimple Drive Requirements
nEase of Paralleling
TO-3
REPETITIVE A V ALANCHE AND dv/dt RATED JANTX2N6804
HEXFETTRANSISTORS
JANTXV2N6804
THRU-HOLE (TO-204AA/AE)
[REF:MIL-PRF-19500/562]
IRF9130
100V, P-CHANNEL
IRF9130
2www.irf.com
Thermal Resistance
Parameter Min Typ Max Units Test Conditions
RthJC Junction to Case 1.67
RthJA Junction-to-Ambient 30 soldered to a 2” square copper-clad board
°C/W
Source-Drain Diode Ratings and Characteristics
Parameter Min Typ Max Units Test Conditions
ISContinuous Source Current (Body Diode) -11
ISM Pulse Source Current (Body Diode) -50
VSD Diode Forward Voltage -4.7 V Tj = 25°C, IS =-11A, VGS = 0V
trr Reverse Recovery Time 250 nS Tj = 25°C, IF =-11A, di/dt -100A/µs
QRR Reverse Recovery Charge 3.0 µc VDD -50V
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
A
For footnotes refer to the last page
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter Min Typ Max Units Test Conditions
BVDSS Drain-to-Source Breakdown Voltage -100 V VGS = 0V, ID = -1.0mA
BVDSS/TJTemperature Coefficient of Breakdown -0.087 V/°C Reference to 25°C, ID = -1.0mA
Voltage
RDS(on) Static Drain-to-Source On-State 0.30 VGS =-10V, ID =-7.0A
Resistance 0.35 VGS =-10V, ID =-11A
VGS(th) Gate Threshold Voltage -2.0 -4.0 V VDS = VGS, ID =-250µA
gfs Forward Transconductance 3 S ( ) V
DS >-15V, IDS =-7.0A
IDSS Zero Gate Voltage Drain Current -25 VDS=-80V, VGS=0V
-250 VDS =-80V
VGS = 0V, TJ = 125°C
IGSS Gate-to-Source Leakage Forward -100 VGS =-20V
IGSS Gate-to-Source Leakage Reverse 100 VGS =-20V
QgTotal Gate Charge 29 VGS =-10V, ID=-11A
Qgs Gate-to-Source Charge 7.1 nC VDS =-50V
Qgd Gate-to-Drain (‘Miller’) Charge 2 1
td(on) Turn-On Delay Time 60 VDD =-50V, ID =-11A,
trRise Time 140 RG =7.5
td(off) Turn-Off Delay Time 140
tfFall Time 140
LS + LDTotal Inductance 6.1
Ciss Input Capacitance 860 VGS = 0V, VDS =25V
Coss Output Capacitance 350 pF f = 1.0MHz
Crss Reverse Transfer Capacitance 125
nA
nH
ns
µA
Measured from the center of
drain pad to center of source
pad
www.irf.com 3
IRF9130
Fig 4. Normalized On-Resistance
Vs. Temperature
Fig 2. Typical Output CharacteristicsFig 1. Typical Output Characteristics
Fig 3. Typical Transfer Characteristics
IRF9130
4www.irf.com
Fig 8. Maximum Safe Operating Area
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
Fig 7. Typical Source-Drain Diode
Forward Voltage
13 a& b
www.irf.com 5
IRF9130
Fig 10a. Switching Time Test Circuit
Fig 10b. Switching Time Waveforms
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
Fig 9. Maximum Drain Current Vs.
Case Temperature
V
DS
90%
10%
V
GS
t
d(on)
t
r
t
d(off)
t
f
VDS
-10V
Pulse Width 1 µs
Duty Factor ≤ 0.1 %
RD
VGS
VDD
RGD.U.T.
+
-
IRF9130
6www.irf.com
-10V
Fig 13b. Gate Charge Test Circuit
Fig 13a. Basic Gate Charge Waveform
Fig 12c. Maximum Avalanche Energy
Vs. Drain Current
Fig 12b. Unclamped Inductive Waveforms
Fig 12a. Unclamped Inductive Test Circuit
tpV
(BR)DSS
I
AS
QG
QGS QGD
VG
Charge
R
G
I
AS
0.01
t
p
D.U.T
L
V
DS
V
DD
DRIVER A
15V
-20V
-10V
D.U.T. VDS
ID
IG
-3mA
VGS
.3µF
50K
.2µF
12V
Current Regulator
Same Type as D.U.T.
Current Sampling Resistors
+
-
-12V
www.irf.com 7
IRF9130
Foot Notes:
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
IR EUROPEAN REGIONAL CENTRE: 439/445 Godstone Rd, Whyteleafe, Surrey CR3 OBL, UK Tel: ++ 44 (0)20 8645 8000
IR CANADA: 15 Lincoln Court, Brampton, Ontario L6T3Z2, Tel: (905) 453 2200
IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 (0) 6172 96590
IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 011 451 0111
IR JAPAN: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo 171 Tel: 81 (0)3 3983 0086
IR SOUTHEAST ASIA: 1 Kim Seng Promenade, Great World City West Tower, 13-11, Singapore 237994 Tel: ++ 65 (0)838 4630
IR TAIWAN:16 Fl. Suite D. 207, Sec. 2, Tun Haw South Road, Taipei, 10673 Tel: 886-(0)2 2377 9936
Data and specifications subject to change without notice. 1/01
ISD -11A, di/dt -140A/µs,
VDD -100V, TJ 150°C
Suggested RG =7.5
Repetitive Rating; Pulse width limited by
maximum junction temperature.
VDD =-25V, starting TJ = 25°C,
Peak IL = -11A, Pulse width 300 µs; Duty Cycle 2%
Case Outline and Dimensions —TO-204AA (Modified TO-3)