4 Channel Rail to Rail Output Operating Amplifier
Copyright ANPEC Electronics Corp.
Rev. A.2 - Nov., 2009
APC209
www.anpec.com.tw1
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Features
Applications
• Amplifiers
• Filters
• Analog circuit
General Description
• Operating Voltage: VDD : 2.4V~6.0V
• Low Input Current
• Rail to Rail Output Swing
• Push-Pull Output Driving
• High Output Current Drive :100mA
• Wide Bandwidth: 7MHz
• Fast Slew Rate 5V/ms
• Available in 14 pin TSSOP Package
• Lead Free and Green Devices Available
(RoHS Compliant)
Simplified Application Circuit
Input
1/2 VDD
Output
The APC209 consists of four independent, high gain and
high output driver current, CMOS operating amplifier,com-
bining rail to rail output range with large output current. It
provides a low input bias current 2pA. The output swing
of the amplifier, guaranteed for loads down to 1kΩ and
output current to an 10Ω load from a 5V power supply.
APC209 is designed to operate at 3V, especially well-
suited for low voltage application.
Ordering and Marking Information
Note : ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
APC209
Handling Code
Temperature Range
Package Code
°
APC209
XXXXX XXXXX - Date Code
Assembly Material
Package Code
O : TSSOP-14
Operating Ambient Temperature Range
I : -40 to 85 C
Handling Code
TR : Tape & Reel
Assembly Material
G : Halogen and Lead Free Device
APC209 O :
Copyright ANPEC Electronics Corp.
Rev. A.2 - Nov., 2009
APC209
www.anpec.com.tw2
Pin Configuration
13 4INN
2OUT 7
2INP 5
1INN 2
1INP 3
2INN 6
VDD 4
12 4INP
8 3OUT
11 GND
14 4OUT
10 3INP
9 3INN
1OUT 1
APC209
Top View
Absolute Maximum Ratings (Note 1)
Note 1 : Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Symbol Parameter Rating Unit
VDD Supply Voltage (VDD to GND) -0.3 ~ 6 V
Input Voltage (INN,INP to GND) -0.3 ~ VDD+0.3 V
PD Power Dissipation Internally Limited W
TJ Maximum Junction Temperature 150 oC
TSTG Storage Temperature -65 ~ 150 oC
TSDR Maximum Lead Soldering Temperature, 10 Seconds 260 oC
Thermal Characteristics
Symbol Parameter Typical Value Unit
θJA Junction-to-Ambient Resistance in Free Air (Note 2)
TSSOP-14
100 oC/W
Note 2 : θJA is measured with the component mounted on a high effective thermal conductivity test board in free air.
Recommended Operation Conditions (Note 3)
Note 3 : Refer to the typical application circuit
Symbol Parameter Range Unit
VDD Supply Voltage 2.4 ~ 5.5 V
VICM Common Mode Input Voltage 0 ~ VDD-1 V
TA Ambient Temperature -40 ~ 85 oC
TJ Junction Temperature -40 ~ 125 oC
Copyright ANPEC Electronics Corp.
Rev. A.2 - Nov., 2009
APC209
www.anpec.com.tw3
Electrical Characteristics
APC209
Symbol
Parameter Test Conditions Min Typ Max Unit
TA=25 oC
VOS Input Offset Voltage -25 oC<TA<75 oC - 4 10 mV
IBIAS Input Bias Current - 2 - pA
VICM Input Command Voltage Range 0 - VDD-0.8
V
RIN Input Resistance - 5 - MΩ
VO Output Voltage Swing RL=2kΩ 0 - 5 V
VOH Output High Voltage RL=10kΩ,-25 oC<TA<75 oC - 4.98 - V
VOL Output Low Voltage RL=10kΩ,-25 oC<TA<75 oC - 0.02 - V
Output Source Current VO=4.5V - -300 -
IOUT Output Sink Current VO=0.5V - 300 - mA
VO=1/2VDD, -25 oC<TA<75 oC - 1.25 4
IDD Supply Current (Per Channel) 2.4V<VDD<6V, TA=25 oC - 2.5 5 mA
CMRR
Common Mode Rejection Ratio VO=4.5V - -80 - dB
IOS Input Offset Current VO=0.5V - - 1 pA
PSRR
Supply Voltage Rejection Ratio Vrr=100mVPP, fin=100Hz,RL=2kΩ - -50 - dB
Av Large Signal Voltage Gain RL=10kΩ - 85 - dB
GBW
Gain Bandwidth Product RL=10kΩ - 7 - MHz
PM Phase Margin AV=100, RL=10kΩ - 48 - Degree
SR Slew Rate VOPP=0.8V, CI=150pF, RL=10kΩ - 5.6 - V/µS
THD+N
Total Harmonic Distortion Plus
Noise Av=1 - 0.01 - %
Unless otherwise specified, these specifications apply over VDD=5V, GND=0V and TA= 25 oC, unless otherwise
specified.
Copyright ANPEC Electronics Corp.
Rev. A.2 - Nov., 2009
APC209
www.anpec.com.tw4
Typical Operating Characteristics
Supply Current vs. Supply Voltage
Supply voltage(V)
Supply Current (mA)
Supply Current vs. Temperature
Supply Current (mA)
Temperature(°C)
Input Offset Voltage vs. Temperature
Input Offset Voltage (mV)
Temperature(°C)Supply Voltage(V)
Input Common Mode Voltage vs.
Supply Voltage
Input Common Mode Voltage (V)
Output Swing vs. Temperature
Output Swing (V)
Temperature(°C)
Output Swing vs. Supply Voltage
Supply Voltage (V)
Output Swing (V)
0
1
2
3
4
5
6
0 1 2 3 4 5 6 7
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
-25 0 25 50 75
VDD=5V
0
1
2
3
4
5
6
7
-25 0 25 50 75
VDD=5V
0
0.5
1
1.5
2
2.5
3
3.5
4
0 1 2 3 4 5 6 7
No Load
0
1
2
3
4
5
6
7
8
0 1 2 3 4 5 6 7
RL=2kΩ
0
1
2
3
4
5
6
-25 0 25 50 75
VDD=5V, RL=2kΩ
Copyright ANPEC Electronics Corp.
Rev. A.2 - Nov., 2009
APC209
www.anpec.com.tw5
Output Current vs. Output Swing Output Swing vs. Load Resistance
Typical Operating Characteristics (Cont.)
Output Swing (mA)
Output Swing (V)
Output Swing (V)
Load Resistance (Ω)
Sink Current vs. Output Voltage
Output Voltage Referred to Ground (V)
Sink Current (mA)
Source Current vs. Output Voltage
Source Current (mA)
Output Voltage Referred to Vdd(V)
Large Signal Voltage Gain vs. Frequency
Frequency (Hz)
Gain(dB)
Large Signal Frequency Response
Output Swing (V)
Frequency (Hz)
0.1
1
10
100
1000
0 1 2 3 4 5 6
VDD=5V
0
1
2
3
4
5
6
10 100 1k 10k
VDD=5V
0
50
100
150
200
250
300
350
400
450
500
00.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
VDD=5V
0
50
100
150
200
250
300
350
400
450
500
00.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
VDD=5V
+0
+100
+10
+20
+30
+40
+50
+60
+70
+80
+90
10 10M
100 1k 10k 100k 1M
VDD=5V
0
1
2
3
4
5
6
10 100 1k 10k 100k 1M 10M
VDD=5V, RL=2kΩ
Copyright ANPEC Electronics Corp.
Rev. A.2 - Nov., 2009
APC209
www.anpec.com.tw6
50
55
60
65
70
75
80
85
90
95
100
1 2 3 4 5
Supply Voltage (V)
Large Signal Voltage Gain vs. Supply Voltage
Av (dB)
CMRR vs. Frequency
Frequency (Hz)
CMRR (dB)
PSRR vs. Frequency
Frequency (Hz)
PSRR (dB)
Voltage Follower Pulse Response
Time (µs)
Output Voltage (V)
Input Voltage (V)
Typical Operating Characteristics (Cont.)
Time (µs)
Voltage Follower Pulse Response
Output Voltage (V)
Input Voltage (V)
-100
+0
-90
-80
-70
-60
-50
-40
-30
-20
-10
10 100k100 1k 10k
VDD=5V,RL=10kΩ
-80
+0
-70
-60
-50
-40
-30
-20
-10
10 100k100 1k 10k
VDD=5V
VRR=100mVpp/100Hz
-0.2
-0.1
0
0.1
0.2
0.3
0.4
0.5
-0.5
0.2
-0.4
-0.3
-0.2
-0.1
0
0.1
1 20 3 4
VDD=5V,CL=270pF
0
1
2
3
4
5
6
7
8
9
-4
-3
-2
-1
0
1
2
3
4
5
01 2 3 4 5
VDD=5V,RL=2kΩ
Copyright ANPEC Electronics Corp.
Rev. A.2 - Nov., 2009
APC209
www.anpec.com.tw7
Pin Description
PIN
NO. NAME FUNCTION
1 1OUT The output pin of 1st operating amplifier.
2 1INN The inverting input pin of 1st operating amplifier.
3 1INP The non-inverting input pin of 1st operating amplifier.
4 VDD Operating Amplifier’s supply voltage pin.
5 2INP The non-inverting input pin of 2nd operating amplifier.
6 2INN The inverting input pin of 2nd operating amplifier.
7 2OUT The output pin of 2nd operating amplifier.
8 3OUT The output pin of 3rd operating amplifier.
9 3INN The inverting input pin of 3rd operating amplifier.
10 3INP The non-inverting input pin of 3rd operating amplifier.
11 GND Operating Amplifier’s ground.
12 4INP The non-inverting input pin of 4th operating amplifier.
13 4INN The inverting input pin of 4th operating amplifier.
14 4OUT The output pin of 4th operating amplifier.
Block Diagram
1OUT
2OUT
3OUT
4OUT
1INN
2INN
3INN
4INN
1INP
2INP
3INP
4INP
VDD
GND
Copyright ANPEC Electronics Corp.
Rev. A.2 - Nov., 2009
APC209
www.anpec.com.tw8
Package Information
TSSOP-14
Note : 1. Followed from JEDEC MO-153 AB-1.
2. Dimension "D" does not include mold flash, protrusions
or gate burrs. Mold flash, protrusion or gate burrs shall not
exceed 6 mil per side .
3. Dimension "E1" does not include inter-lead flash or protrusions.
Inter-lead flash and protrusions shall not exceed 10 mil per side.
6.20 6.60 0.244 0.260
S
Y
M
B
O
LMIN. MAX.
1.20
0.05
0.09 0.20
4.90 5.10
0.15
A
A1
c
D
E
e
L
MILLIMETERS
b0.19 0.30
0.65 BSC
TSSOP-14
0.45 0.75 0.026 BSC
MIN. MAX.
INCHES
0.047
0.002
0.007 0.012
0.004 0.008
0.193 0.201
0.169 0.177
0.018 0.030
0o8o0o8o
0.006
A2 0.80 1.05
4.30 4.50E1
0.031 0.041
θ
VIEW A SEATING PLANE
GAUGE PLANE
L
θ
0.25
A
A2
A1
SEE VIEW A
c
D
eb
E1
E
Copyright ANPEC Electronics Corp.
Rev. A.2 - Nov., 2009
APC209
www.anpec.com.tw9
Application
A H T1 C d D W E1 F
330.0±2.00
50 MIN.
16.4+2.00
-
0.00
13.0+0.50
-0.20
1.5 MIN.
20.2 MIN.
12.0±0.30
1.75±0.10
5.50±0.10
P0 P1 P2 D0 D1 T A0 B0 K0
TSSOP-14
4.00±0.10
8.00±0.10
2.00±0.10
1.5+0.10
-0.00
1.5 MIN.
0.6+0.00
-0.40
6.40±0.20
5.20±0.20
1.60±0.20
(mm)
Carrier Tape & Reel Dimensions
H
T1
A
d
A
E1
A
B
W
F
T
P0
OD0
BA0
P2
K0
B0
SECTION B-B
SECTION A-A
OD1
P1
Devices Per Unit
Package Type Unit Quantity
TSSOP-14 Tape & Reel 2500
Copyright ANPEC Electronics Corp.
Rev. A.2 - Nov., 2009
APC209
www.anpec.com.tw10
Taping Direction Information
TSSOP-14
Classification Profile
USER DIRECTION OF FEED
Copyright ANPEC Electronics Corp.
Rev. A.2 - Nov., 2009
APC209
www.anpec.com.tw11
Classification Reflow Profiles
Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly
Preheat & Soak
Temperature min (Tsmin)
Temperature max (Tsmax)
Time (Tsmin to Tsmax) (ts)
100 °C
150 °C
60-120 seconds
150 °C
200 °C
60-120 seconds
Average ramp-up rate
(Tsmax to TP) 3 °C/second max. 3°C/second max.
Liquidous temperature (TL)
Time at liquidous (tL) 183 °C
60-150 seconds 217 °C
60-150 seconds
Peak package body Temperature
(Tp)* See Classification Temp in table 1 See Classification Temp in table 2
Time (tP)** within 5°C of the specified
classification temperature (Tc) 20** seconds 30** seconds
Average ramp-down rate (Tp to Tsmax)
6 °C/second max. 6 °C/second max.
Time 25°C to peak temperature 6 minutes max. 8 minutes max.
* Tolerance for peak profile Temperature (Tp) is defined as a supplier minimum and a user maximum.
** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum.
Table 2. Pb-free Process – Classification Temperatures (Tc)
Package
Thickness Volume mm3
<350 Volume mm3
350-2000 Volume mm3
>2000
<1.6 mm 260 °C 260 °C 260 °C
1.6 mm – 2.5 mm 260 °C 250 °C 245 °C
≥2.5 mm 250 °C 245 °C 245 °C
Table 1. SnPb Eutectic Process – Classification Temperatures (Tc)
Package
Thickness Volume mm3
<350 Volume mm3
≥350
<2.5 mm 235 °C 220 °C
≥2.5 mm 220 °C 220 °C
Reliability Test Program
Test item Method Description
SOLDERABILITY JESD-22, B102 5 Sec, 245°C
HOLT JESD-22, A108 1000 Hrs, Bias @ 125°C
PCT JESD-22, A102 168 Hrs, 100%RH, 2atm, 121°C
TCT JESD-22, A104 500 Cycles, -65°C~150°C
HBM MIL-STD-883-3015.7 VHBM≧2KV
MM JESD-22, A115 VMM≧200V
Latch-Up JESD 78 10ms, 1tr≧100mA
Copyright ANPEC Electronics Corp.
Rev. A.2 - Nov., 2009
APC209
www.anpec.com.tw12
Customer Service
Anpec Electronics Corp.
Head Office :
No.6, Dusing 1st Road, SBIP,
Hsin-Chu, Taiwan, R.O.C.
Tel : 886-3-5642000
Fax : 886-3-5642050
Taipei Branch :
2F, No. 11, Lane 218, Sec 2 Jhongsing Rd.,
Sindian City, Taipei County 23146, Taiwan
Tel : 886-2-2910-3838
Fax : 886-2-2917-3838
