SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 FEATURES 1 * Available in the Texas Instruments NanoFreeTM Package * Low Static-Power Consumption (ICC = 0.9 A Max) * Low Dynamic-Power Consumption (Cpd = 5 pF Typ at 3.3 V) * Low Input Capacitance (CI = 1.5 pF) * Low Noise - Overshoot and Undershoot <10% of VCC * Input-Disable Feature Allows Floating Input Conditions * Ioff Supports Partial-Power-Down Mode Operation * Includes Schmitt-Trigger Inputs * * * 2 Wide Operating VCC Range of 0.8 V to 3.6 V Optimized for 3.3-V Operation 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation tpd = 7.4 ns Max at 3.3 V Suitable for Point-to-Point Applications Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Performance Tested Per JESD 22 - 2000-V Human-Body Model (A114-B, Class II) - 200-V Machine Model (A115-A) - 1000-V Charged-Device Model (C101) * * * * DCT PACKAGE (TOP VIEW) YZP PACKAGE (BOTTOM VIEW) DCU PACKAGE (TOP VIEW) OE 1 8 VCC A 2 7 Y B 3 6 D GND 4 5 C OE A B GND 1 2 3 8 7 6 4 5 GND B A OE VCC Y D C 4 5 3 6 2 7 1 8 C D Y VCC See mechanical drawings for dimensions. DESCRIPTION/ORDERING INFORMATION The AUP family is TI's premier solution to the industry's low-power needs in battery-powered portable applications. This family ensures a very low static- and dynamic-power consumption across the entire VCC range of 0.8 V to 3.6 V, resulting in an increased battery life. This product also maintains excellent signal integrity (see Figures 1 and 2). xxxxxx 80% 80% 60% 60% 40% 3.3-V Logic 40% 3.3-V LVC Logic AUP 0% 3.5 3 2.5 Input 2 1.5 1 Output 0.5 20% 20% 0% Switching Characteristics at 25 MHz Dynamic-Power Consumption (pF) 100% Voltage - V Static-Power Consumption (A) 100% AUP Single, dual, and triple gates Figure 1. AUP - The Lowest-Power Family 0 -0.5 0 5 10 15 20 25 30 Time - ns 35 40 45 AUP1G08 data at C = 15 pF L Figure 2. Excellent Signal Integrity 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. NanoFree is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2004-2007, Texas Instruments Incorporated SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 DESCRIPTION/ORDERING INFORMATION The SN74AUP1G99 features configurable multiple functions with a 3-state output. This device has the input-disable feature, which allows floating input signals. The inputs and output are disabled when the output-enable (OE) input is high. When OE is low, the output state is determined by 16 patterns of 4-bit input. The user can choose the logic functions, such as MUX, AND, OR, NAND, NOR, XOR, XNOR, inverter, and buffer. All inputs can be connected to VCC or GND. This device functions as an independent gate with Schmitt-trigger inputs, which allows for slow input transition and better switching noise immunity at the input. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. NanoStarTM and NanoFreeTM package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. ORDERING INFORMATION PACKAGE (1) (2) TA -40C to 85C (1) (2) (3) 2 ORDERABLE PART NUMBER TOP-SIDE MARKING (3) NanoFreeTM - WCSP (DSBGA) 0.23-mm Large Bump - YZP (Pb-free) Tape and reel SN74AUP1G99YZPR _ _ HY_ SSOP - DCT Tape and reel SN74AUP1G99DCTR H99_ _ _ VSSOP - DCU Tape and reel SN74AUP1G99DCUR H99_ Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. DCT: The actual top-side marking has three additional characters that designate the year, month, and assembly/test site. DCU: The actual top-side marking has one additional character that designates the assembly/test site. YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, * = Pb-free). Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1G99 SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 FUNCTION TABLE INPUTS (1) OE D C B A OUTPUT Y L L L L L L L L L L H H L L L H L L L L L H H H L L H L L L L L H L H L L L H H L H L L H H H H L H L L L H L H L L H L L H L H L H L H L H H L L H H L L H L H H L H H L H H H L L L H H H H L H X (1) X (1) X (1) X (1) Z Floating inputs allowed. LOGIC DIAGRAM (POSITIVE LOGIC) OE A B 1 2 3 7 C D 5 Y 6 Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1G99 3 SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 FUNCTION SELECTION TABLE PRIMARY FUNCTION COMPLEMENTARY FUNCTION PAGE 3-state buffer 4 3-state inverter 4 3-state 2-to-1 data selector MUX 5 3-state 2-to-1 data selector MUX, inverted out 5 3-state 2-input AND 3-state 2-input NOR, both inputs inverted 5 3-state 2-input AND, 1 input inverted 3-state 2-input NOR, 1 input inverted 5 3-state 2-input AND, both inputs inverted 3-state 2-input NOR 5 3-state 2-input NAND 3-state 2-input OR, both inputs inverted 6 3-state 2-input NAND, 1 input inverted 3-state 2-input OR, 1 input inverted 6 3-state 2-input NAND, both inputs inverted 3-state 2-input OR 6 3-state 2-input XOR 6 3-state 2-input XNOR 3-state 2-input XOR, 1 input inverted 7 3-STATE BUFFER FUNCTIONS AVAILABLE INPUT FUNCTION 3-state buffer OE L Y A B C D Input X L L X Input H L L H Input L H L Input H H X L Input X L H Input L L X Input 3-STATE INVERTER FUNCTIONS AVAILABLE INPUT FUNCTION 3-state inverter 4 OE L Y A B C D Input X L H X Input H H L H Input H H L Input L H X L Input X H H Input H H X Input Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1G99 SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 3-STATE MUX FUNCTIONS AVAILABLE A/B A/B Input 1 Input 1 Y Input 2 Y Input 2 FUNCTION OE A B C D 3-state 2-to-1, data selector MUX Input 1 Input 2 Input 1 or Input 2 L 3-state 2-to-1, data selector MUX Input 2 Input 1 Input 2 or Input 1 L Input 1 Input 2 Input 1 or Input 2 H Input 2 Input 1 Input 2 or Input 1 H L 3-state 2-to-1, data selector MUX, inverted out 3-state 2-to-1, data selector MUX, inverted out 3-STATE AND/NOR FUNCTIONS AVAILABLE Input 1 Input 1 Y Input 2 NO. OF INPUTS AND/NAND FUNCTION OR/NOR FUNCTION 2 3-state AND 3-state NOR, both inputs inverted 2 3-state AND 3-state NOR, both inputs inverted Input 1 Y Input 2 Y Input 2 OE L Input 1 A B C D L Input 1 Input 2 L L Input 2 Input 1 L D Y Input 2 NO. OF INPUTS AND/NAND FUNCTION OR/NOR FUNCTION 2 3-state AND, with A inverted 3-state NOR, with B inverted 2 3-state AND, with A inverted 3-state NOR, with B inverted Input 1 OE L Input 1 Y Input 2 A B C Input 2 L Input 1 L H Input 1 Input 2 H Y Input 2 NO. OF INPUTS AND/NAND FUNCTION OR/NOR FUNCTION 2 3-state AND, with B inverted 3-state NOR, with A inverted 2 3-state AND, with B inverted 3-state NOR, with A inverted Input 1 OE L Input 1 Y Input 2 A B C D Input 1 L Input 2 L H Input 2 Input 1 H A B C D Input 1 H Input 2 H Input 2 H Input 1 H Y Input 2 NO. OF INPUTS AND/NAND FUNCTION OR/NOR FUNCTION 2 3-state AND, both inverted inputs 3-state NOR 2 3-state AND, both inverted inputs 3-state NOR OE L Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1G99 5 SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 3-STATE NAND/OR FUNCTIONS AVAILABLE Input 1 Input 1 Y Input 2 Y Input 2 NO. OF INPUTS AND/NAND FUNCTION OR/NOR FUNCTION 2 3-state NAND 3-state OR, with both inputs inverted 2 3-state NAND 3-state OR, with both inputs inverted Input 1 OE L Input 1 Y Input 2 A B C D L Input 1 Input 2 H L Input 2 Input 1 H Y Input 2 NO. OF INPUTS AND/NAND FUNCTION OR/NOR FUNCTION 2 3-state NAND, with A inverted 3-state OR, with B inverted 2 3-state NAND, with A inverted 3-state OR, with B inverted Input 1 OE L A B C D Input 2 L Input 1 H H Input 1 Input 2 L Input 1 Y Input 2 Y Input 2 NO. OF INPUTS AND/NAND FUNCTION OR/NOR FUNCTION 2 3-state NAND, with B inverted 3-state OR, with A inverted 2 3-state NAND, with B inverted 3-state OR, with A inverted Input 1 OE L A B C D Input 1 L Input 2 H H Input 2 Input 1 L Input 1 Y Input 2 Y Input 2 NO. OF INPUTS AND/NAND FUNCTION OR/NOR FUNCTION 2 3-state NAND, with both inputs inverted 3-state OR 2 3-state NAND, with both inputs inverted 3-state OR OE L A B C D Input 1 H Input 2 L Input 2 H Input 1 L 3-STATE XOR/XNOR FUNCTIONS AVAILABLE Input 1 Y Input 2 FUNCTION 3-state XOR 6 OE L A B C D Input 1 X L Input 2 Input 2 X L Input 1 X Input 1 H Input 2 X Input 2 H Input 1 L H Input 1 Input 2 L H Input 2 Input 1 Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1G99 SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 3-STATE XOR/XNOR FUNCTIONS AVAILABLE (continued) Input 1 Y Input 2 FUNCTION OE A B C D 3-state XOR, with A inverted L H L Input 1 Input 2 Input 1 Y Input 2 FUNCTION OE A B C D 3-state XOR, with B inverted L H L Input 1 Input 2 Input 1 Y Input 2 FUNCTION 3-state XNOR 3-state XNOR OE L A B C D H L Input 1 Input 2 H L Input 2 Input 1 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) VCC MIN MAX Supply voltage range -0.5 4.6 UNIT V (2) VI Input voltage range -0.5 4.6 V VO Voltage range applied to any output in the high-impedance or power-off state (2) -0.5 4.6 V VO Output voltage range in the high or low state (2) -0.5 VCC + 0.5 IIK Input clamp current VI < 0 -50 mA IOK Output clamp current VO < 0 -50 mA IO Continuous output current 20 mA Continuous current through VCC or GND 50 mA JA Tstg (1) (2) (3) Package thermal impedance (3) DCT package 220 DCU package 227 YZP package 102 Storage temperature range -65 150 V C/W C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed. The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1G99 7 SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 Recommended Operating Conditions (1) VCC Supply voltage VI Input voltage VO Output voltage IOH High-level output current MIN MAX 0.8 3.6 V 0 3.6 V Active state 0 VCC 3-state 0 3.6 VCC = 0.8 V -20 VCC = 1.1 V -1.1 VCC = 1.4 V -1.7 VCC = 1.65 V -1.9 VCC = 2.3 V -3.1 VCC = 3 V IOL Low-level output current Input transition rise or fall rate TA Operating free-air temperature (1) 8 V A mA -4 VCC = 0.8 V 20 VCC = 1.1 V 1.1 VCC = 1.4 V 1.7 VCC = 1.65 V 1.9 VCC = 2.3 V 3.1 VCC = 3 V t/v UNIT A mA 4 VCC = 0.8 V to 3.6 V -40 200 ns/V 85 C All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1G99 SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC MIN VT+ Positive-going input threshold voltage VT- Negative-going input threshold voltage VT Hysteresis (VT+ - VT-) 0.6 0.3 0.6 0.3 1.1 V 0.53 0.9 0.53 0.9 1.4 V 0.74 1.11 0.74 1.11 1.65 V 0.91 1.29 0.91 1.29 2.3 V 1.37 1.77 1.37 1.77 3V 1.88 2.29 1.88 2.29 0.8 V 0.1 0.6 0.1 0.6 1.1 V 0.26 0.65 0.26 0.65 1.4 V 0.39 0.75 0.39 0.75 1.65 V 0.47 0.84 0.47 0.84 2.3 V 0.69 1.04 0.69 1.04 3V 0.88 1.24 0.88 1.24 0.8 V 0.07 0.5 0.07 0.5 1.1 V 0.08 0.46 0.08 0.46 1.4 V 0.18 0.56 0.18 0.56 1.65 V 0.27 0.66 0.27 0.66 2.3 V 0.53 0.92 0.53 0.92 0.79 1.31 0.79 1.31 VCC - 0.1 IOH = -1.1 mA 1.1 V 0.75 x VCC 0.7 x VCC IOH = -1.7 mA 1.4 V 1.11 1.03 IOH = -1.9 mA 1.65 V 1.32 1.3 2.05 1.97 1.9 1.85 2.72 2.67 IOH = -4 mA 2.3 V 3V IOL = 20 A 0.8 V to 3.6 V IOL = 1.1 mA IOL = 1.7 mA IOL = 1.9 mA IOL = 2.3 mA IOL = 3.1 mA IOL = 2.7 mA IOL = 4 mA II MAX VCC - 0.1 IOH = -2.7 mA VI = GND to 3.6 V UNIT MIN 0.8 V to 3.6 V IOH = -3.1 mA All inputs MAX IOH = -20 A IOH = -2.3 mA VOL TYP 0.8 V 3V VOH TA = -40C to 85C TA = 25C 2.6 V V V V 2.55 0.1 0.1 1.1 V 0.3 x VCC 0.3 x VCC 1.4 V 0.31 0.37 1.65 V 0.31 0.35 0.31 0.33 0.44 0.45 0.31 0.33 0.44 0.45 0 V to 3.6 V 0.1 0.5 A 2.3 V 3V V Ioff VI or VO = 0 V to 3.6 V 0V 0.2 0.6 A Ioff VI or VO = 0 V to 3.6 V 0 V to 0.2 V 0.2 0.6 A IOZ VO = VCC or GND 3.6 V 0.1 0.5 A ICC VI = GND or (VCC to 3.6 V), OE = GND, IO = 0 0.8 V to 3.6 V 0.5 0.9 A Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1G99 9 SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 Electrical Characteristics (continued) over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS MIN Data inputs ICC VI = VCC - 0.6 V, (1) IO = 0 MAX MIN VI = GND to 3.6 V, OE = VCC (2) VI = VCC or GND Co VO = VCC or GND UNIT MAX 40 50 110 CI (1) (2) TYP 3.3 V OE All inputs TA = -40C to 85C TA = 25C VCC 0.8 V to 3.6 V A 120 0 0V 1.5 3.6 V 1.5 3.6 V 3 nA pF pF One input at VCC - 0.6 V, other input at VCC or GND To show ICC is very low when the input-disable feature is enabled. Switching Characteristics over recommended operating free-air temperature range, CL = 5 pF (unless otherwise noted) (see Figure 3 and Figure 4) PARAMETER FROM (INPUT) TO (OUTPUT) MIN TYP 1.2 V 0.1 V 0.5 1.5 V 0.1 V A, B, C, or D Y MIN MAX 9.9 20.1 0.5 26.6 1.4 6.6 11.9 0.5 16.8 1.8 V 0.15 V 1.8 5.3 8.9 1 13 2.5 V 0.2 V 2.1 3.9 5.8 1.3 8.9 3.3 V 0.3 V 1.9 3.3 4.8 1.2 7.4 32 0.8 V ten OE Y 10 OE Y 1.2 V 0.1 V 0.6 11.1 21.7 0.5 25.2 1.5 V 0.1 V 2.3 7.4 12.6 1.4 16.4 1.8 V 0.15 V 2 5.7 9.4 1.1 12.8 2.5 V 0.2 V 2.1 4.1 6.2 1.2 8.5 3.3 V 0.3 V 1.9 3.4 5 1.1 6.7 8.2 ns 9.8 1.2 V 0.1 V 1.4 4.5 7.7 1.5 1.5 V 0.1 V 1.7 3.2 4.8 1.7 6 1.8 V 0.15 V 1.5 3 4.7 1.3 6.1 2.5 V 0.2 V 0.9 1.9 3 0.7 4.2 3.3 V 0.3 V 0.8 2.5 4.4 0.7 4.5 Submit Documentation Feedback ns 35 0.8 V tdis UNIT MAX 0.8 V tpd TA = -40C to 85C TA = 25C VCC ns Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1G99 SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 Switching Characteristics over recommended operating free-air temperature range, CL = 10 pF (unless otherwise noted) (see Figure 3 and Figure 4) PARAMETER FROM (INPUT) TO (OUTPUT) MIN TYP MAX MIN MAX 1.2 V 0.1 V 0.4 10.7 1.5 V 0.1 V 21.1 0.7 29.8 2 7.2 12.6 1.1 18.5 1.8 V 0.15 V 2.3 5.8 9.5 1.5 14.5 2.5 V 0.2 V 2.5 4.4 6.3 1.7 10.5 3.3 V 0.3 V 2.3 3.7 5.2 1.5 8.4 0.8 V tpd A, B, C, or D Y OE Y OE Y 1.2 V 0.1 V 1.4 12.1 22.8 0.8 29.3 1.5 V 0.1 V 2.8 8 13.3 2 18.7 1.8 V 0.15 V 2.5 6.2 10 1.6 14.8 2.5 V 0.2 V 2.5 4.5 6.7 1.6 9.9 3.3 V 0.3 V 2.3 3.8 5.4 1.5 8.2 2 5.6 9.3 2 10 1.5 V 0.1 V 2.5 4.1 5.8 2.4 7.6 1.8 V 0.15 V 2.9 4.2 5.7 2.7 7.9 2.5 V 0.2 V 1.1 2.7 4.4 1.1 5.5 3.3 V 0.3 V 1.9 3.5 5.2 1.9 5.8 Submit Documentation Feedback Product Folder Link(s): SN74AUP1G99 ns 0 1.2 V 0.1 V Copyright (c) 2004-2007, Texas Instruments Incorporated ns 0 0.8 V tdis UNIT 36 0.8 V ten TA = -40C to 85C TA = 25C VCC ns 11 SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 Switching Characteristics over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 3 and Figure 4) PARAMETER FROM (INPUT) TO (OUTPUT) MIN TYP 1.2 V 0.1 V 0.9 1.5 V 0.1 V A, B, C, or D Y MIN MAX 11.4 22 0.5 30.8 2.5 7.8 13.2 1.6 19.2 1.8 V 0.15 V 2.7 6.3 10 1.9 15.1 2.5 V 0.2 V 2.8 4.7 6.6 2 10.8 3.3 V 0.3 V 2.6 4 5.5 1.8 8.8 38 0.8 V ten OE Y 12 OE Y 1.2 V 0.1 V 1.8 13 24.2 1.3 30.6 1.5 V 0.1 V 3.2 8.6 14.1 2.4 19.5 1.8 V 0.15 V 2.9 6.7 10.6 2 15.4 2.5 V 0.2 V 2.8 4.9 7 1.9 10.3 3.3 V 0.3 V 2.6 4.1 5.7 1.8 8.6 10.7 ns 13 1.2 V 0.1 V 2.7 6.3 9.9 2.8 1.5 0.1 V 3.2 4.6 6.1 3.1 8 1.8 V 0.15 V 3.2 4.8 6.6 3 8.8 2.5 V 0.2 V 2.2 3.4 4.7 2 6 3.3 V 0.3 V 2.4 4.4 6.5 2.3 7.2 Submit Documentation Feedback ns 44 0.8 V tdis UNIT MAX 0.8 V tpd TA = -40C to 85C TA = 25C VCC ns Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1G99 SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 Switching Characteristics over recommended operating free-air temperature range, CL = 30 pF (unless otherwise noted) (see Figure 3 and Figure 4) PARAMETER FROM (INPUT) TO (OUTPUT) MIN 0.8 V tpd A, B, C, or D Y OE Y OE Y MAX MIN MAX UNIT 48 3.1 14 24.9 2.6 36.1 1.5 V 0.1 V 4.2 9.6 15.1 3.3 23.1 1.8 V 0.15 V 4.1 7.9 11.7 3.3 18 2.5 V 0.2 V 4.1 5.9 7.9 3.1 12.7 3.3 V 0.3 V 3.7 5.1 6.7 2.8 10.4 ns 50 1.2 V 0.1 V 4.4 16 27.6 3.9 36.8 1.5 V 0.1 V 5.3 10.7 16.2 4.3 23.6 1.8 V 0.15 V 4.6 8.5 12.4 3.6 18.6 2.5 V 0.2 V 4.2 6.3 8.5 3.2 12.6 3.3 V 0.3 V 3.8 5.4 7.1 2.9 10.2 0.8 V tdis TYP 1.2 V 0.1 V 0.8 V ten TA = -40C to 85C TA - 25C VCC ns 19 1.2 V 0.1 V 6 10.1 14.2 6 14.6 1.5 V 0.1 V 5.1 7.4 10.6 5 10.1 1.8 V 0.15 V 5.5 8.6 11.6 5.5 12.1 2.5 V 0.2 V 3.3 5.9 8.3 3.3 8.9 3.3 V 0.3 V 6 8.7 10.9 5.9 11.8 ns Operating Characteristics TA = 25C PARAMETER TEST CONDITIONS Outputs enabled Cpd Power dissipation capacitance f = 10 MHz Outputs disabled VCC TYP 0.8 V 4 1.2 0.1 V 4 1.5 0.1 V 4 1.8 V 0.15 V 4 2.5 V 0.2 V 5 3.3 V 0.3 V 5 0.8 V 0 1.2 0.1 V 0 1.5 0.1 V 0 1.8 V 0.15 V 0 2.5 V 0.2 V 0 3.3 V 0.3 V 0 Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1G99 UNIT pF 13 SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 PARAMETER MEASUREMENT INFORMATION (Propagation Delays, Setup and Hold Times, and Pulse Width) From Output Under Test CL (see Note A) 1 M LOAD CIRCUIT CL VM VI VCC = 0.8 V VCC = 1.2 V 0.1 V VCC = 1.5 V 0.1 V VCC = 1.8 V 0.15 V VCC = 2.5 V 0.2 V VCC = 3.3 V 0.3 V 5, 10, 15, 30 pF VCC/2 VCC 5, 10, 15, 30 pF VCC/2 VCC 5, 10, 15, 30 pF VCC/2 VCC 5, 10, 15, 30 pF VCC/2 VCC 5, 10, 15, 30 pF VCC/2 VCC 5, 10, 15, 30 pF VCC/2 VCC tw VCC Input VCC/2 VCC/2 VI VM Input 0V VM VOLTAGE WAVEFORMS PULSE DURATION 0V tPHL tPLH VOH VM Output VM VOL tPHL VCC Timing Input 0V tPLH tsu VOH Output VCC/2 VM th VCC VM VOL Data Input VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS VCC/2 VCC/2 0V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES NOTES: A. CL includes probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , for propagation delays tr/tf = 3 ns, for setup and hold times and pulse width tr/tf = 1.2 ns. C. The outputs are measured one at a time, with one transition per measurement. D. tPLH and tPHL are the same as tpd. E. All parameters and waveforms are not applicable to all devices. Figure 3. Load Circuit and Voltage Waveforms 14 Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1G99 SN74AUP1G99 LOW-POWER ULTRA-CONFIGURABLE MULTIPLE-FUNCTION GATE WITH 3-STATE OUTPUTS www.ti.com SCES594C - JULY 2004 - REVISED DECEMBER 2007 PARAMETER MEASUREMENT INFORMATION (Enable and Disable Times) 2 x VCC S1 5 k From Output Under Test GND CL (see Note A) 5 k TEST S1 tPLZ/tPZL tPHZ/tPZH 2 x VCC GND LOAD CIRCUIT CL VM VI V VCC = 0.8 V VCC = 1.2 V 0.1 V VCC = 1.5 V 0.1 V VCC = 1.8 V 0.15 V VCC = 2.5 V 0.2 V VCC = 3.3 V 0.3 V 5, 10, 15, 30 pF VCC/2 VCC 0.1 V 5, 10, 15, 30 pF VCC/2 VCC 0.1 V 5, 10, 15, 30 pF VCC/2 VCC 0.1 V 5, 10, 15, 30 pF VCC/2 VCC 0.15 V 5, 10, 15, 30 pF VCC/2 VCC 0.15 V 5, 10, 15, 30 pF VCC/2 VCC 0.3 V VCC Output Control VCC/2 0V Output Waveform 1 S1 at 2 x VCC (see Note B) tPZL tPLZ VCC VCC/2 tPZH Output Waveform 2 S1 at GND (see Note B) VCC/2 VOL + V VOL tPHZ VCC/2 VOH - V VOH 0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr/tf = 3 ns. D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. All parameters and waveforms are not applicable to all devices. Figure 4. Load Circuit and Voltage Waveforms Submit Documentation Feedback Copyright (c) 2004-2007, Texas Instruments Incorporated Product Folder Link(s): SN74AUP1G99 15 PACKAGE OPTION ADDENDUM www.ti.com 22-Dec-2008 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN74AUP1G99DCTR ACTIVE SM8 DCT 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AUP1G99DCTRE4 ACTIVE SM8 DCT 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AUP1G99DCTRG4 ACTIVE SM8 DCT 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AUP1G99DCTT ACTIVE SM8 DCT 8 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AUP1G99DCTTE4 ACTIVE SM8 DCT 8 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AUP1G99DCTTG4 ACTIVE SM8 DCT 8 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AUP1G99DCUR ACTIVE US8 DCU 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AUP1G99DCURE4 ACTIVE US8 DCU 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AUP1G99DCURG4 ACTIVE US8 DCU 8 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AUP1G99DCUT ACTIVE US8 DCU 8 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AUP1G99DCUTE4 ACTIVE US8 DCU 8 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AUP1G99DCUTG4 ACTIVE US8 DCU 8 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AUP1G99YZPR ACTIVE DSBGA YZP 8 3000 Green (RoHS & no Sb/Br) SNAGCU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 22-Dec-2008 incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 6-May-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74AUP1G99DCUR US8 DCU 8 3000 180.0 8.4 2.25 3.35 1.05 4.0 8.0 Q3 SN74AUP1G99YZPR DSBGA YZP 8 3000 180.0 8.4 1.02 2.02 0.63 4.0 8.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 6-May-2011 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74AUP1G99DCUR US8 DCU 8 3000 202.0 201.0 28.0 SN74AUP1G99YZPR DSBGA YZP 8 3000 220.0 220.0 34.0 Pack Materials-Page 2 MECHANICAL DATA MPDS049B - MAY 1999 - REVISED OCTOBER 2002 DCT (R-PDSO-G8) PLASTIC SMALL-OUTLINE PACKAGE 0,30 0,15 0,65 8 0,13 M 5 0,15 NOM CCCCC CCCCC CCCCC CCCCC 2,90 2,70 4,25 3,75 Gage Plane PIN 1 INDEX AREA 1 0,25 4 0 - 8 3,15 2,75 0,60 0,20 1,30 MAX Seating Plane 0,10 0,10 0,00 NOTES: A. B. C. D. 4188781/C 09/02 All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion Falls within JEDEC MO-187 variation DA. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated