(1.000±.010)
25,40±0.25
20,32±0.25
(.800±.010)
(.420±.020)
10,67±0.51
2,54±0.38 Ø0,56
N.C.LEAD
Ø0,56
(.022)
(.100±.015) (.022)
N.O.LEAD
14,73
C OF OVERLAP
(.580)MAX
(.063)TYP
(.020)
0,51
2,87
(.037)
0,94
1,60
RECOMMENDED LAND PATTERN
(.020)
Ø0,51
19,30
(.760) (.138)TYP
3,50
(.113)MAX
(.001)MIN
0,025
(.100)MAX
Ø2,54 LEAD
COMMON
• Surface mounting changeover switch
• Miniature size with 14.73mm x 2.54mm
(0.580” x 0.100”) glass envelope
• Capable of switching 175Vdc or 0.25A
at up to 5W
• 109 Ohms insulation resistance
• Available sensitivity 15-30 AT
• Bulk or tape and reel packaging. See sheet 2
Benefits Applications
www.hamlin.com
Contact Rating (1) Power Watts - max 5
Voltage Switching Vdc - max. 175
Breakdown Vdc - min. 200
Current Switching A - max. 0.25
Carry A - max. 1.5
Resistance Contact, Initial Ohms - max. 0.1
Insulation Ohms - min. 109
Temperature Operating °C -40 to +125
Storage (2) °C -65 to +125
Capacitance Contact pF - typ. 1.0
Vibration 50-2000 Hz. G - max. 30
ELECTRICAL RATINGS Contact Form C - Changeover
SWITCH DIMENSIONS (in) mm
SWITCH TYPE MDSM-DT
•
Hermetically sealed switch contacts
are not affected by and have no effect
on their external environment
• Low, stable contact resistance
• Very small space requirements
• Zero operating power required for
contact closure
• Fit and forget durability
OPERATING CHARACTERISTICS
Features
• Position sensing
• Level sensing
• Telecoms
• Office Equipment
• Mobile Phones
File E47258 MDSM-DT REED SWITCH
Issue:2 19/11/04 DCR:B2737
Time Operate (3) ms - max. 0.7
Release (3) ms - max. 1.0
Shock 11ms ½ sine G - max. 50
Resonant Frequency kHz -typ. 11
MAGNETIC CHARACTERISTICS
Pull-In Ranges Available Switch AT before modification Ampere Turns (AT) 15-30, 15-20, 20-25 and 25-30
Rating Sensitivity (4) Ampere Turns (AT) 20
Test Coil L4989
Hamlin USA Tel: +1 920 648 3000 Fax: +1 920 648 3001 Email: sales.us@hamlin.com
Hamlin UK Tel: +44 (0) 1379 649700 Fax: +44 (0) 1379 649702 Email: sales.uk@hamlin.com
Hamlin Germany Tel: +49 (0) 6181 953660 Fax: +49 (0) 6181 9536666 Email: sales.de@hamlin.com
Hamectrol France Tel: +33 (0) 1 4687 Fax: +33 (0) 1 4686 6798 Email: sales.fr@hamlin.com
DETAILS ON THIS DATA SHEET ARE PROVIDED FOR INFORMATION PURPOSES ONLY
&
SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE
Product performance may be affected by the application that the part is used for.
Upon request Hamlin will assist purchasers by providing information specific to a particular application.
Hamlin disclaims all liability whatsoever for any purchaser’s reliance upon the information
contained in this data sheet without further consultation with Hamlin’s authorised representatives.
Notes:- 1) Contact Rating. Product of the switching voltage and current must never exceed the wattage rating. Contact Hamlin for additional load/life information.
2) Storage Temperature. Long term exposure at elevated temperature may degrade solderability of the leads.
3) Operate (including bounce) /Release Time. Tested per EIA/NARM RS421A with diode suppressed coil.
4) Rating Sensitivity. The value at which the contact ratings and operating characteristics are determined. De-rating may be required below this value.
Sheet 1 of 2 Sheets
® File E61760(N) ®
®
120° TYP.
(.075±.016)
1,9±0.4 TYP.
(.512±.008)
Ø13,0±0.2
Ø21,0±0.4
(.827±.016)
(.138)
3,50
(.240)
6,10
(.079)
(.157)
4,00
2,00
+.004
(.059 )
-0
-0
+0,10
1,50
(.067 )
-.002
+.006
+0,15
-0,05
1,70
2,70
(.106)
6,10
(.240)
3.0°
Ø2,00
(.079)
1,00
(.039)
(.129)
3,28
8,00
(.315)
20,20
(.795)
(.069)
1,75
40,40
(1.591)
+.004
(.059 )
Ø1,50 +0.10
-0
-0
100,0±0,5
MEASURED AT HUB
+.008
(44,4 )
(1.748 )
+0.2
50,4 MAX.
(3.937±.020)
-0
-0
(1.984)
330,00
(12.992 )
-0,76
-.030
+.010
+0,25
3. ALL DIMENSIONS ARE TO INSIDE OF POCKET
2. ALL POCKET DIMENSIONS ARE ±(.004") 0,10mm
ARE PER FIA-481 UNLESS NOTED
1. ALL TAPE & SPROCKET HOLE DIMENSIONS
(.014)
0,36
3,00
(.118)
(1.732)
44,00
3.0°
5,63
(.222)
(.118)
3,00
26,00
(1.024)
www.hamlin.com
Issue:2 19/11/04 DCR:B2737
DETAILS ON THIS DATA SHEET ARE PROVIDED FOR INFORMATION PURPOSES ONLY
&
SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE
Product performance may be affected by the application that the part is used for.
Upon request Hamlin will assist purchasers by providing information specific to a particular application.
Hamlin disclaims all liability whatsoever for any purchaser’s reliance upon the information
contained in this data sheet without further consultation with Hamlin’s authorised representatives.
File E47258 MDSM-DT REED SWITCH
Sheet 2 of 2 Sheets
REEL DIMENSIONS (in) mm
TAPE DIMENSIONS (in) mm
Packaging: - Bulk - 100 per Box or Tape and Reel - 2,500 per Reel
®
Hamlin USA Tel: +1 920 648 3000 Fax: +1 920 648 3001 Email: sales.us@hamlin.com
Hamlin UK Tel: +44 (0) 1379 649700 Fax: +44 (0) 1379 649702 Email: sales.uk@hamlin.com
Hamlin Germany Tel: +49 (0) 6142 923920 Fax: +49 (0) 6142 923921 Email: sales.de@hamlin.com
Hamectrol France Tel: +33 (0) 1 6047 3000 Fax: +33 (0) 1 6015 9136 Email: sales.fr@hamlin.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Hamlin:
MDSM-DTB 20-25 MDSM-DTB 20-30 MDSM-DTR 15-25 MDSM-DTB 15-20 MDSM-DTR 15-30 MDSM-DTR 20-25
MDSM-DTB 25-30 MDSM-DTR 15-20 MDSM-DTB 15-30 MDSM-DTR 20-30 MDSM-DTR 25-30 MDSM-DTB 15-25
Littelfuse:
MDSM-DTR-20-25 MDSM-DTB-15-20 MDSM-DTR-15-20 MDSM-DTB-25-30 MDSM-DTR-15-25 MDSM-DTR-20-30
MDSM-DTB-15-30 MDSM-DTB-15-25 MDSM-DTB-20-30 MDSM-DTR-15-30 MDSM-DTB-20-25 MDSM-DTR-25-30
