0 Features n High saturation current n Inductance range: 1.2 to 220 H n Heating current up to 5.3 A n Dimensions: 5.8 x 5.2 x 4.5 mm n AEC-Q200 compliant n RoHS compliant* and halogen free** SDE0604A Series - SMD Power Inductors Bourns Part Number SDE0604A-1R2M SDE0604A-1R5M SDE0604A-2R2M SDE0604A-2R7M SDE0604A-3R3M SDE0604A-3R9M SDE0604A-4R7M SDE0604A-5R6M SDE0604A-6R8M SDE0604A-8R2M SDE0604A-100M SDE0604A-120M SDE0604A-150M SDE0604A-180M SDE0604A-220M SDE0604A-270M SDE0604A-330M SDE0604A-390M SDE0604A-470M SDE0604A-560K SDE0604A-680K SDE0604A-820K SDE0604A-101K SDE0604A-121K SDE0604A-151K SDE0604A-181K SDE0604A-221K L (H) 1.2 1.5 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 Inductance Tol. (%) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 Test Freq./ Voltage 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 kHz / 1 V 1 kHz / 1 V 1 kHz / 1 V 1 MHz / 1 V 1 MHz / 1 V General Specifications SRF (MHz) Typ. DCR (W) Typ. DCR (W) Max. I rms (A) I sat (A) ***KFactor 155 123 80 60 50 44 47 41 36 31 32 29 26 24 19 18 17 17 14 12 11 8 7.5 7.5 7 6 5 0.016 0.0185 0.0229 0.0278 0.0299 0.034 0.0382 0.0419 0.0467 0.0537 0.0621 0.0675 0.0947 0.114 0.128 0.14 0.184 0.215 0.258 0.298 0.343 0.436 0.559 0.599 0.9 1.03 1.325 0.02 0.024 0.031 0.055 0.06 0.065 0.07 0.075 0.08 0.09 0.10 0.12 0.14 0.15 0.18 0.20 0.23 0.32 0.37 0.42 0.46 0.60 0.70 0.90 1.1 1.38 1.57 5.3 5.0 4.35 4.0 3.8 3.6 3.4 3.2 3.0 2.8 2.6 2.5 2.3 2.0 1.8 1.7 1.55 1.4 1.25 1.1 1.0 0.9 0.8 0.75 0.52 0.5 0.47 6.0 5.3 4.2 3.8 3.5 3.2 3.0 2.75 2.4 2.2 2.0 1.85 1.65 1.5 1.35 1.2 1.1 1.0 0.9 0.82 0.74 0.68 0.62 0.6 0.52 0.5 0.47 355 307 243 220 200 184 171 159 140 125 118 107 94 87 78 71 63 58 53 50 45 42 38 35 31 29 25.8 ***K-Factor: To calculate core flux density, Bp-p (gauss) = K x L(H) x I (peak-to-peak ripple current, A), determine core loss from Core Loss vs. Flux Density plot. Core Loss vs. Flux Density Operating Temperature .................................-40 C to +125 C (Temperature rise included) Storage Temperature .................................-40 C to +125 C Resistance to Solder Heat .............................. +250 C for 10 sec. Temperature Rise ........................40 C typ. at rated Irms Inductance Drop............ 10 % typ. at Isat Moisture Sensitivity Level......................1 ESD Classification (HBM)................. N/A Materials Core...............................................Ferrite Wire.............................Enameled copper Terminal Finish....................................Sn Packaging................... 1000 pcs. per reel Product Dimensions 5.80 0.3 (.228 .012) 5.80 0.3 (.228 .012) 100100 Electrical Specifications @ 25 C 5.20 0.3 (.228 .012) 5.20 0.3 (.228 .012) 2.10 0.5 (.083 .020) 2.10 0.5 (.083 .020) 4.50 0.3 (.177 .012) 4.50 0.3 (.177 .012) 10000 1 MHz 800 KHz 500 KHz 400 KHz 300 KHz 200 KHz 100 KHz Core Loss (mW) 1000 100 Recommended Layout 10 5.50 (.217 .012) 5.50 (.217 .012) 1 0.1 0.01 10 100 1000 Flux Density Bp-p (gauss) 6.00 (.236) 6.00 (.236) DIMENSIONS: 1.70 (.067) 1.70 (.067) MM (INCHES) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex & RoHS Recast 2011/65/EU June 8, 2011. ** Bourns considers a product to be "halogen free" if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. SDE0604A Series - SMD Power Inductors Inductance vs. IDC Electrical Schematic SDE0604A-3R3M L @ 25 C 4.0 SDE0604A-100M L @ 125 C L @ 25 C 12.0 L @ 125 C 10.0 L (H) L (H) 3.0 2.0 How to Order 8.0 SDE0604A - 100M 6.0 4.0 1.0 Model Value Code (see table) 2.0 0.0 0.0 1.0 2.0 3.0 4.0 0.0 0.0 5.0 0.5 1.0 40.0 L @ 125 C L @ 25 C 120.0 35.0 2.5 3.0 3.5 L @ 125 C 100.0 30.0 80.0 25.0 L (H) L (H) 2.0 SDE0604A-101K SDE0604A-330M L @ 25 C 1.5 IDC (A) IDC (A) 20.0 15.0 60.0 40.0 10.0 20.0 5.0 0.0 0.0 0.5 1.0 1.5 0.0 0.0 2.0 0.2 0.4 0.6 0.8 1.0 IDC (A) IDC (A) Temperature Rise vs. IDC SDE0604A-3R3M 70.0 60.0 60.0 50.0 50.0 40.0 30.0 40.0 30.0 20.0 20.0 10.0 10.0 0.0 0.0 1.0 2.0 T @ 25 C 70.0 T (C) T (C) SDE0604A-100M T @ 25 C 3.0 4.0 0.0 5.0 0.0 0.5 1.0 IDC (A) 50.0 T (C) T (C) 60.0 40.0 30.0 30.0 20.0 10.0 10.0 1.0 IDC (A) 3.5 40.0 20.0 0.5 3.0 T @ 25 C 70.0 50.0 0.0 2.5 SDE0604A-101K T @ 25 C 60.0 0.0 2.0 IDC (A) SDE0604A-330M 70.0 1.5 1.5 2.0 0.0 0.0 0.2 0.4 0.6 IDC (A) 0.8 1.0 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/ disclaimer.pdf. SDE0604A Series - SMD Power Inductors Peak Temperature250 max. Max. Peak Temperature -5 30 sec. max. Max. Time Above 217 : 60~150 sec. max. Soldering Profile Temperature Rising Area Preheat Area Reflow Area Forced Cooling Area +4.0 C/Sec. Max. 150~200 C / 60~120 Sec. +3.0 C/Sec. Max. -(1.0~5.0) C/Sec. Max. Peak Temperature: 250 C Temperature (C) 250 217 C 60~150 Sec. 200 Max. Peak Temperature -5 C: 30 sec. max. 60 Sec. Max. 150 Max. Time Above 217 C: 90-150 sec. max. 60~120 Sec. 100 Peak Temperature: 250 C max. 50 50 0 100 150 200 250 Time (Seconds) Packaging Specifications 2.0 0.5 (.079 .020) 330 (12.99) DIA. 22.4 (.882) THICKNESS 0.10 (.004) MAX. 13.0 0.5 (.512 .020) DIA. 21.0 0.8 (.827 .031) EMBOSSED CAVITY 50.0 -0 (1.969 - .000) 13.0 0.5 DIA. (.512 .020) EMBOSSED CARRIER 18.0 +0 (.709 +.000) 12 (.472) END 4 (.157) 100 100 100 100 START 100 NO COMPONENT 350 (13.780) 16.0 (.630) 100 NO COMPONENT 400 (15.748) COMPONENTS USER DIRECTION OF FEED QTY: 1,000 PCS. PER REEL DIMENSIONS: MM (INCHES) REV. 12/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and (32 ?+( 3$2".++$"3(5$+8:.41-2; Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change 6(3'.43-.3("$2$122'.4+#"'$"*%.1 -#.!3 (-3'$+ 3$231$+$5 -3(-%.1, 3(.- -#5$1(%83' 324"'(-%.1, 3(.-(2"411$-3 and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R)/1.#4"3(- 42$1 //+(" 3(.-, 85 18 %1.,3'$# 3 2'$$3"' 1 "3$1(23("2 -#/ 1 ,$3$12#4$3.(3'$".,!(- 3(.-.%3'$.41-2(R) product with other components (-3'$42$1<2 //+(" 3(.-.1((3'$$-5(1.-,$-3.%3'$42$1 //+(" 3(.-(32$+%'$"' 1 "3$1(23("2 -#/ 1 ,$3$12.% .41-2(R) /1.#4"3 +2." - -##.5 18(-#(>$1$-3 //+(" 3(.-2 -# "34 +/$1%.1, -"$, 85 18.5$13(,$2$122'.4+# +6 825$1(%8 the actual performance of the Bourns(R)/1.#4"3(-3'$(12/$"(="#$5("$2 -# //+(" 3(.-2 -#, *$3'$(1.6-(-#$/$-#$-3 )4#&,$-321$& 1#(-&3'$ ,.4-3.% ##(3(.- +3$23, 1&(-3.#$2(&-(-3.3'$(1#$5("$.1 //+(" 3(.-3.".,/$-2 3$%.1 #(>$1$-"$2!$36$$-+ !.1 3.18 -#1$ +6.1+#".-#(3(.-2 -+$22.41-2' 2$7/+("(3+8#$2(&- 3$# -(-#(5(#4 +.41-2(R) product as meeting the requirements of a particular industry 23 -# 1#$& .1 / 13("4+ 104 +(=" 3(.-$&+(23$#.11$".&-(9$#.41-2(2-.31$2/.-2(!+$%.1 -8 % (+41$.% -(-#(5(#4 +.41-2(R)/1.#4"33.,$$33'$1$04(1$,$-32.%24"'(-#4231823 -# 1#.1/ 13("4+ 104 +(=" 3(.-2$12 of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to 3'$(1#$5("$2.1 //+(" 3(.-2 Bourns(R)/1.#4"32 1$-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$#%.142$(--4"+$ 1+(%$2 5(-&+(%$"1(3(" +.1+(%$2423 (-(-& //+(" 3(.-2-.1(- -8.3'$1 //+(" 3(.-26'$1$% (+41$.1, +%4-"3(.-, 81$24+3(-/$12.- +(-)418#$ 3'.12$5$1$/1./$138 .1$-5(1.-,$-3 +# , &$-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2 on a case-by-case basis, use of any Bourns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ourns(R)23 -# 1#/1.#4"32 1$-.33$23$#3.".,/+86(3'-(3$#3 3$2$#$1 +5( 3(.-#,(-(231 3(.-23 -# 1#2&$-$1 ++8 .1 -8.3'$1&$-$1 ++8$04(5 +$-3&.5$1-,$-3 +.1& -(9 3(.-23 -# 1# //+(" !+$3./1.#4"32#$2(&-$#.1, -4% "341$#%.1 42$(- (1"1 %3.12/ "$ //+(" 3(.-2.41-2$7/1$22+8(#$-3(=$2.41-2(R) standard products that are suitable for use in aircraft .12/ "$ //+(" 3(.-2.-24"'/1.#4"32<# 3 2'$$32(-3'$2$"3(.-$-3(3+$#://+(" 3(.-2;-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2.- " 2$!8" 2$! 2(242$.% -8.3'$1.41-2(R) standard /1.#4"3(- - (1"1 %3.12/ "$ //+(" 3(.-,(&'3-.3!$2 %$ -#3'42(2-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$# -#(2 3 the user's sole risk. '$42$ -#+$5$+.%3$23(-& //+(" !+$3..41-2(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R)"423.,/1.#4"32 1$2/$"( ++8#$2(&-$#!2$-3 61(33$- &1$$,$-3!$36$$-.41-2 -#3'$42$11$& 1#(-&3'$42$ -#+$5$+.%24"'3$23(-&3'$ !.5$/1.5(2(.-2 //+(" !+$3..41-2(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R)/1.#4"32.13$"'-.+.&8%.142$(- "3(5(3($26'("'(-5.+5$3'$ #$2(&-#$5$+./,$-3/1.#4"3(.-42$.123."*/(+(-&.%-4"+$ 1"'$,(" +.1!(.+.&(" +6$ /.-2.1,(22(+$2-.12' ++3'$842$ Bourns(R)/1.#4"32.13$"'-.+.&8(- -8% "(+(386'("'$-& &$2(- "3(5(3($21$+ 3(-&3.24"'#$5("$2'$%.1$&.(-&1$231("3(.-2 //+83. ++42$2 -# //+(" 3(.-23' 35(.+ 3$- 3(.- +.1(-3$1- 3(.- +/1.'(!(3(.-2(-"+4#(-&$,! 1&.2.1(-3$1- 3(.- + 1$&4+ 3(.-2413'$1.41-2(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without /1(.1 43'.1(9 3(.-%1.,.41-2 -#.13'$.5$1-,$-3!$1$2.+#31 -2%$11$#.11$$7/.13$#3. -8/ 138-.3$+(&(!+$ 3.1$"$(5$".,,.#(3($22.%36 1$ -#3$"'-(" +# 3 .3'$, 7(,4,$73$-3/$1,(33$#!8 //+(" !+$+ 6.41-2#(2"+ (,2( -8 -# +++( !(+(38%.12/$"( +/4-(3(5$".-2$04$-3( + (-"(#$-3 +.1(-#(1$"3# , &$2.1+.231$5$-4$2.1+.23/1.=32 -#(( -8 -# ++(,/+($#6 11 -3($2(-"+4#(-&(,/+($#6 11 -3($2 .%=3-$22%.1/ 13("4+ 1/41/.2$-.-(-%1(-&$,$-3 -#,$1"' -3 !(+(38 bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf