Low VF/ESD Leaded Schottky Barrier Rectifiers SB220E-G thru SB2100E-G "-G" : RoHS Device Voltage Range: 20 to 100 V Current: 2.0 A FEATURES DO-15 * Low drop down voltage * 2.0A operation at T A =75C with no thermal runaway * For use in low voltage, high frequency invertors free wheeling and polarity protection * Silicon epitaxial planar chips * Electrostatic discharge (ESD) test under IEC61000-4-2: standard: >15KV (air) & 8KV (contact) * Lead-free part, meet RoHS requirements 1.0(25.4) Min. .140(3.6) .104(2.6) .300(7.6) .230(5.8) MECHANICAL DATA * Case: Molded plastic body DO-15 * Epoxy: UL94-V0 rated flame retardant * Terminals: Solderable per MIL-STD-750 Method 2026 * Polarity: Color band denotes cathode end * Mounting Position: Any * Weight: 0.015 ounces, 0.4 grams 1.0(25.4) Min. .034(0.86) .028(0.71) Unit :inch(mm) MAXIMUM RATING AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified Symbols 220E 240E 245E 250E 260E 280E 2100E Units Maximum Recurrent Peak Reverse Voltage V RRM 20 40 45 50 60 80 100 Volts Maximum RMS Voltage V RMS 14 28 30 35 42 56 70 Volts Maximum DC Blocking Voltage V DC 20 40 45 50 60 80 100 Volts Maximum Average Forward Rectified Current 0.375" (9.5mm) lead length at T A =75C, See Figure 1 I AV 2.0 Amps I FSM 50 Amps Peak Forward Surge Current 8.3mS single half sine-wave superimp osed on rated load (JEDEC Me thod) T L =110C Maximum Forward Voltage at 2.0A (Note 1) Maximum DC Reverse Current at Rated DC Blocking Voltage T A = 25C T A =100 C VF IR 0.50 0.70 0.85 0.5 20 10 Volts mA Typical Junction Capacitance (Note 2) CJ 170 pF Typical Thermal Resistance (Note 3) R JA R JL 50.0 25.0 C/W Operating Junction Temperature Range Storage Temperature Range TJ T STG -65 ~ +125 -65 ~ +150 -65 ~ +150 C C Note 1. Pulse test: 300S pu lse wi dth, 1% du ty cy cle 2. Me asured at 1.0MH z an d ap plied reverse vo ltage of 4.0 Volts 3. Therma l resistance from junction to am bient and from junction to lead P.C.B. mo unted 0. 375" (9.5mm ) lead length MDS0906003A Page 1 Low VF/ESD Leaded Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES SB220E-G thru SB2100E-G Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 2.4 Peak Forward Surge Current (A) Average Forward Current (A) Fig.1 - Forward Current Derating Curve RESISTIVE OR INDUCTIVE LOAD 2.0 1.6 SB220E - SB260E 1.2 SB280E - SB2100E 0.8 single phase half wave 60Hz resistive or inductive load 3.75"(9.5mm) lead length 0.4 0 25 50 75 100 125 150 175 100 10 T L =110C 8.3mS single half sine-wave (JEDEC Method) 1 1 10 Lead Temperature ( C) Number of Cycles at 60 Hz Fig. 3 - Typical Instantaneour Forward Characteristics Instantaneous Reverse Current (mA) Fig. 4A - Typical Reverse Characteristics Instantaneous Forward Current (A) 10 SB280E - SB2100E SB250E - SB260E 1.0 SB220E - SB245E 0.1 0 0.2 0.4 0.6 100 SB220E - SB260E 10 T J =125C T J =100C 1.0 T J =75C 0.1 0.01 0.001 0 0.8 T J =25C 20 40 60 80 100 120 140 Instantaneous Forward Voltage (Volts) Percent of Rated Peak Reverse Voltage ( %) Fig. 5 - Typical Junction Capacitance Fig. 4B - Typeical Reverse Characteristic 1000 10000 Instantaneous Reverse Current (uA) Junction Capacitance (pF) 100 SB280E - SB2100E 1000 100 T J =25C f=1.0MHz 10 0.1 1.0 10 Reverse Voltage (Volts) MDS0906003A 100 T J =150C T J =125C 100 T J =100C 10 1.0 T J =25C 0.1 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage ( %) Page 2