Low VF/ESD Leaded Schottky Barrier Rectifiers
MDS0906003APage 1
SB220E-G thru SB2100E-G
Voltage Range: 20 to 100 V
Current: 2.0 A
"-G" : RoHS Device
• Case: Molded plastic body DO-15
• Epoxy: UL94-V0 rated flame retardant
• Terminals: Solderable per MIL-STD-750 Method 2026
• Polarity: Color band denotes cathode end
• Mounting Position: Any
• Weight: 0.015 ounces, 0.4 grams
• Low drop down voltage
• 2.0A operation at TA=75°C with no thermal runaway
• For use in low voltage, high frequency invertors free
wheeling and polarity protection
• Silicon epitaxial planar chips
• Electrostatic discharge (ESD) test under IEC61000-4-2:
standard: >15KV (air) & 8KV (contact)
• Lead-free part, meet RoHS requirements
Symbols 220E 240E 245E 250E 260E 280E 2100E Units
Maximum Recurrent Peak Reverse Voltage VRRM 20 40 45 50 60 80 100 Volts
Maximum RMS Voltage VRMS 14 28 30 35 42 56 70 Volts
Maximum DC Blocking Voltage VDC 20 40 45 50 60 80 100 Volts
Maximum Average Forward Rectified Current
0.375” (9.5mm) lead length at TA=75°C, See Figure 1
Peak Forward Surge Current
8.3mS single half sine-wave superimp osed on IFSM 50 Amps
rated load (JEDEC Me thod) TL=110°C
Maximum Forward Voltage at 2.0A (Note 1) VF 0.50 0.70 0.85 Volts
Maximum DC Reverse Current TA= 25°C
at Rated DC Blocking Voltage TA=100°C
Typical Junction Capacitance (Note 2) CJ 170 pF
Typical Thermal Resistance (Note 3) RθJA 50.0
RθJL 25.0
Operating Junction Temperature Range TJ -65 ~ +125 -65 ~ +150 °C
Storage Temperature Range TSTG -65 ~ +150 °C
MAXIMUM RATING AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified
FEATURES
MECHANICAL DATA
IAV 2.0 Amps
IR mA
°C/W
0.5
20 10
Unit :inch(mm)
DO-15
1.0(25.4) Min.
1.0(25.4) Min.
.300(7 .6 )
.230(5 .8 )
.140(3.6)
.104(2.6)
.034(0.86)
.028(0.71)
Note 1. Pulse test: 300µS pu lse wi dth, 1% du ty cycle
2. Me asured at 1.0MHz an d ap plied reverse vo ltage of 4.0 Volts
3. Therma l resistance from junction to am bient and from junction to lead P.C.B. mo unted 0. 375” (9.5mm) lead length
MDS0906003APage 2
Low VF/ESD Leaded Schottky Barrier Rectifiers
RATINGS AND CHARACTERISTIC CURVES SB220E-G thru SB2100E-G
Reverse Voltage (Volts)
Percent of Rated Peak Reverse Voltage ( %)
Fig. 3 - Typical Instantaneour Forward
Characteristics Fig. 4A - Typical Reverse Characteristics
Instantaneous Forward Voltage (Volts)
Instantaneous Forward Current (A)
Instantaneous Reverse Current (mA)
Fig. 5 - Typical Junction Capacitance
0.1 1.0 10 100
Junction Capacitance (pF)
100
1000
Fig. 4B - Typeical Reverse Characteristic
0 0.2 0.4 0.6 0.8
10
1.0
0.1
10
TJ=25°C
f=1.0MHz
Instantaneous Reverse Current (uA)
Percent of Rated Peak Reverse Voltage ( %)
TJ=25°C
TJ=75°C
TJ=100°C
SB220E - SB260E
SB280E - SB2100E
0 20 40 60 80 100 120 140
100
10
1.0
0.1
0.01
0.001
10000
1000
100
10
1.0
0.1
0 20 40 60 80 100
TJ=25°C
TJ=100°C
TJ=125°C
TJ=150°C
Fig.1 - Forward Current Derating Curve
Average Forward Current (A)
0 25 50 75 100 125 150 175
Lead Temperature ( °C)
2.4
2.0
1.6
1.2
0.8
0.4
RESISTIVE OR INDUCTIVE LOAD
SB220E - SB260E
SB280E - SB2100E
single phase half wave 60Hz
resistive or inductive load
3.75”(9.5mm) lead length
1 10 100
Fig. 2 - Maximum Non-Repetitive Peak
Forward Surge Current
Peak Forward Surge Current (A)
Number of Cycles at 60 Hz
1
10
100
TL=110°C
8.3mS single half sine-wave
(JEDEC Method)
SB220E - SB245E
SB250E - SB260E
SB280E - SB2100E
TJ=125°C
