Chip Inductors-0805HT Series (2012) At just .035 high, these are our lowest profile surface mount inductors. Their wire wound ceramic design provides tight tolerances, exceptional Q Coilcraft Designers Kit C121 contains samples of all the standard parts shown. To order, contact Coilcraft. and high SRF values. Part Inductance! Percent SRF Min Roc Max Ipc Max Color Number (nH) Tolerance Q Min? (MHz) (Ohms) (mA) Code O805HT-1N8TKBC 1.8 @ 250 MHz 10 55 @ 1500 MHz >6000 03 800 Black O805HT-3N9TKBC 3.9 @ 250 MHz 10 50 @ 1000 MHz >6000 .055 800 Brown O805HT-4N7TKBC 4.7 @ 250 MHz 10 50 @ 1000 MHz 5500 .06 800 Red O805HT-6N8TKBC 6.8 @ 250 MHz 10 50 @ 1000 MHz 5500 .08 800 Orance O805HT-8N2TKBC = 8.2 @ 250 MHz 10 50 @ 1000 MHz 4800 .08 800 Yellow O805HT-10NTJBC 10 @ 250 MHz 5 55 @ 750 MHz 3300 .08 800 Green O805HT-12NTJBC 12 @ 250 MHz 5 55 @ 750 MHz 3800 .10 800 Blue O805HT-15NTJBC 15 @ 250 MHz 5 50 @ 500 MHz 2950 10 800 Violet O805HT-18NTJBC 18 @ 250 MHz 5 50 @ 500 MHz 3100 13 800 Gray O805HT-22NTJBC 22 @ 250 MHz 5,2 50 @ 500 MHz 2900 15 800 White O805HT-27NTJBC 27 @ 250 MHz 5.2 50 @ 500 MHz 2450 .19 700 Black O805HT-33NTJBC 33 @ 250 MHz 5.2 55 @ 500 MHz 2350 .19 600 Brow 0805HT-39NTJBC 39 @ 250 MHz 5,2 55 @ 500 MHz 2200 27 600 Red O805HT-47NTJBC 47 @ 200 MHz 5,2 50 @ 500 MHz 2000 .30 600 Orance O805HT-56NTJBC 56 @ 200 MHz 5.2 50 @ 500 MHz 1850 39 500 Yellow O805HT-68NTJBC 68 @ 200 MHz 5,2 50 @ 500 MHz 1500 .40 500 Green O805HT-82NTJBC 82 @ 150 MHz 5.2 50 @ 500 MHz 1500 44 500 Blue O805HT-R10TJBC 100 @ 150 MHz 5,2 50 @ 500 MHz 1200 .64 400 Violet O805HT-R12TJBC 120 @ 150 MHz ,2 40 @ 250 MHz 1150 .68 300 Gray O805HT-R15TJBC 150 @ 150 MHz 5,2 40 @ 250 MHz 1050 .80 300 White For help ordering non-standard parts, see Part Numbering (Document 120). 3. Q measured using HP4291A with HP 16193 test fixture and on HP8753B For environmental data see Product Specifications (Document 121). For part marking data see Color Coding (Document 174). 1. Inductance measured using the HP4291A impedance analyzer with the HP16193A test fixture with Coilcraft-provided correlation pieces. For recom- mended test procedures, contact Coilcraft. 2. Bold number indicates standard tolerance. When ordering other tolerances, replace the third to the last letter in the part number with the proper tolerance code: F=1%, G=2%, J=5%, K=10%, M=20%. (e.g. O805HT-1NSTUBC for a 5% tolerance part) with Coilcraft SMD-E test fixture. 4. SRF measured using HP8753B network analyzer and Coilcraft SMD-D test fixture. 5. Roc measured on Cambridge Technology micro-ohmmeter and Coilcraft CCF858 test fixture. 6. For 15C rise. 7. Operating temperature range 40C to +125C. COILCRAFT,.ccunate PRECISION measuneenrs pace 126 TEST FIXTURES Document 168-1 Revised 6/25/97 1102 Silver Lake Road Cary, Illinois60013 Phone 847/639-6400 Fax 847/639-1469 E-mail info@coilcraftcom Databy Fax 800/651-6974 Web hitp://Awww.coilcraft.com0805HT Series (2012) TYPICAL Q vs FREQUENCY 120 22N fron 100 / 3N9 / 80 AA 39N 4 / / R12 Ye /| / Q 60 A aah JV 40 AA WA, Vv Lo / C | Le, v AT | 20 aa S 7 | eT Ls oF 10 100 1000 10000 Frequency (MHz) eH Lvs FREQUENCY + YL Panter 150 XO POS { || + 8 Terminat wraparound: approx. .010/0,25 both ends A BiC;/EIF/G/iH tid. Max. | Max. | Max. 085 | .060 | .035 | 050! .017 | 045 | .070 | .040/ .030, 2,16 | 1,52! 0,89! 1,27 | 0,43 | 1,14 | 1,78 | 1,02] 0,76. Parts/reel: 7 2,000; 13 7,500 Tape width: 8mm For packaging data see Tape and Reel Specifications (Document 173) 0 Inductance (nH) Co So a Oo 1 10 100 1000 10000 Frequency (MHz) Document 168-2 Revised 6/25/97 1102 Silver Lake Road Cary, Illinois60013 Phone 847/639-6400 Fax 847/639-1469 E-mail info@coilcraftcom Data by Fax 800/651-6974 Web hitp:/Avww.coilcraft.com