FLIR LEPTON®
Camera Breakout v1.4
The FLIR Lepton® Thermal Camera Breakout is an easy to interface to evaluation board to
quickly evaluate the FLIR Lepton® Camera module. It is compatible with a number of low-cost
ARM based evaluation boards such as the NUCLEO-F401RE. In addition it is easy to wire to
any nonstandard pin outs as well such as the raspberry PI..
FEATURES
• Input Voltage: 3 V to 5.5 V
• Space-Saving, (25 mm × 24 mm)
• Works with the FLIR Lepton® modules: 50 degree shuttered, 50 degree, and 25 degree
• Access to SPI and I2C camera module interfaces
• Provides 25-MHz reference clock
• Power Efficient 1.2 V core voltage
• Dual Low Noise LDO for 2.8 V voltage
• 32-pin Molex camera socket for Lepton® Module
• 100 mil header, pinout compatible with Arduino® headers
• PCB size and mounting holes same as standard Raspberry camera
• Additional low profile .5mm FPC connector for embedded applications
APPLICATIONS
• Thermal Imaging
• Motion Sensor
• Night Vision
• Gesture Recognition