FTR-K1 SERIES To be discontinued POWER RELAY 1 POLE - 1/3/5/10A Medium Load Control LZ Series n FEATURES UL, CSA, SEV recognized Contact rating types - Low level to 10 amps switching l Standard and high sensitivity types available l High surge strength version available l UL class B (130C) insulation type available (only plastic sealed type) l Printed circuit terminals - 0.1" grid pitch l Plastic sealed type, RTIII l RoHS compliant. Please see page 9 for more information l l n PARTNUMBER INFORMATION [Example] LZ - B 12 H M S E - K HV - UC (a) (b) (c) (d) (e) (f ) (g) (h) (i) (j) (a) Relay type LZ : LZ-Series (b) Coil wire class Nil B : Standard type : UL class B insulation type (130 C) (c) 12 : 1.5.....100 VDC Coil rating table at page 3 (d) Contact type Nil H V W : 3A : 5A : 10A (standard coil power only) : 1A (bifurcated contact) (e) Contact configuration Nil M : 1 form C (SPDT) : 1 form A (SPST-NO) (f) Nil S : Standard type (450-600mW) : High sensitive type (300mW) (g) Contact material Nil Nil Nil Nil E : Gold overlay silver-palladium (1A) (only LZ-W) : Gold overlay silver-nickel (3A, 5A) : Silver cadmium oxide (10A ) (LZ-V) : Silver tin oxide (10A) (LZ-VM) : Silver-nickel (3A, 5A) (h) Enclosure Nil K C : Flux proof type, RTII : Plastic sealed type (recommended for new designs) RTIII : Plastic sealed type (with tape) RTIII (i) Surge strength Nil HV : Standard type (4,000V) : High surge strength type (6,000V) (j) Approvals UC : UL, CSA approved type Coil rated voltage Coil type 1 FTR-K1LZ SERIES SERIES n SPECIFICATION LZ-( ) (Standard type) Item Contact Data Coil Data Timing Data Insulation 3A Type 1A Type LZ - ( ) V LZ - ( ) VM LZ - ( ) H LZ - ( ) HE LZ - ( ) LZ - ( ) E LZ- ( ) W 1 form A (SPST-NO), 1 form C (SPDT) Construction Single Silver cadmium oxide (LZ-V) Silver tin oxide (LZ-VM) Single (crossbar) Bifurcated (crossbar) Gold overlay silver nickel, Silver nickel (LZ-HE, LZ-E) Gold overlay silverpalladium Max. 50 m Resistance (initial) (at 6 VDC, 1A) Max. 100 m Max. 70 m (LZ-H, LZ) Max. 100 m (LZ-HE, E) Contact rating (resistive) 10A, 120VAC/24VDC 1/4hp, 120VAC 5A, 120VAC/ 24VDC 1/8hp, 120VAC Max. carrying current 10A 5A Max. switching voltage 250VAC, 150 VDC Max. switching power 1,680VA, 240W 960VA, 120W 600VA, 90W 190VA, 30W Max. switching current 10A 5A 3A 1A Min. switching load * 100mA 5VDC 10mA, 5VDC (LZ-H) 100mA, 5VDC (LZ-HE) 10mA, 5VDC(LZ-) 100mA, 5VDC (LZ-E) 0.1mA, 100mVDC Mechanical Min. 20 x 106 operations Electrical Min. 100 x 103 operations (contact rating) Rated Power (at 20 C) 450 - 600mW Operate Power (at 20 C) 170 - 220 mW (LZ - ( ) V : 290 - 390 mW) Operating temperature range -30 C to +70 C (no frost) Operate (at nominal voltage) Max. 7 ms (without bounce) Release (at nominal voltage) Max. 4 ms (no diode) Resistance (initial) Min. 250M at 500VDC Dielectric strength Surge strength Other 5A Type Configuration Material Life 10A Type Vibration resistance Shock Weight 3A, 120VAC/ 30VDC 1/10hp, 120VAC 1A, 120VAC / 30VDC 1A Open contacts 750VAC, 1min Contacts to coil 2,000VAC, 1min Coil to contacts 4,000V / High surge: 6,000V, 1.2 x 50s standard wave Misoperation 10 to 55Hz double amplitude 3.3 mm Endurance 10 to 55Hz double amplitude 3.3 mm Misoperation Min. 100m/s (11 1ms) Endurance Min. 1,000m/s (6 1ms) Approximately 7.7g * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2 FTR-K1LZ SERIES SERIES n SPECIFICATION LZ-( ) S (High sensitive type) Item Contact Data Coil Data Timing Data Insulation 1A Type LZ-( )HS, LZ -( )HSE LZ-( )S, LZ-( )SE LZ-( )WS 1 form A (SPST-NO), 1 form C (SPDT) Construction Single (crossbar) Material Gold overlay silver nickel Resistance (initial) (at 6VDC, 1A) Max. 70m (LZ-HS, S) Max. 100m (LZ-HSE, SE) Max. 50m Resistive 5A, 120VAC / 24VDC 3A, 120VAC / 30VDC 1A, 120VAC / 30VDC Motor load 1/8 hp, 120VAC 1/10 hp, 120VAC Bifurcated (crossbar) Silver nickel (LZ-HSE, SE) Gold overlay silverpalladium - Max. carrying current 5A Max. switching voltage 250VAC, 150 VDC Max. switching power 960VA, 120W 600VA, 90W 190VA, 30W Max. switching current 5A 3A 1A Min. switching load * 10 mA, 5VDC (LZ-HS, S) 100 mA, 5VDC (LZ-HSE, SE) Mechanical Min. 20 x 106 operations Electrical Min. 100 x 103 operations Rated power (at 20 C) 330 mW Operate power (at 20 C) 140 mW Operating temperature range -30 C to +80 C (no frost) Operate (at nominal voltage) Max. 7 ms Release (at nominal voltage) Max. 4 ms Resistance (initial) Min. 250M at 500VDC Dielectric strength Surge strength Other 3A Type Configuration Contact rating Life 5A Type Vibration resistance Shock Weight 1A 0.1 mA, 100mVDC Open contacts 750VAC, 1min Contacts to coil 2,000VAC, 1min Coil to contacts 4,000V / -HV type: 6,000V, 1.2 x 50s standard wave Misoperation 10 to 55Hz double amplitude 3.3 mm Endurance 10 to 55Hz double amplitude 3.3 mm Misoperation Min. 100m/s (11 1ms) Endurance Min. 1,000m/s (6 1ms) Approximately 7.7 g * Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 3 FTR-K1 LZ SERIES SERIES n COIL RATING Standard type (450 mW) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * LZ-(B) ( ) VM LZ-(B) ( ) (M) (E) LZ-(B) ( ) W (M) LZ-(B) ( ) V Must Release Voltage (VDC) * Rated Power (mW) 1.5 1.5 5 0.97 1.2 0.08 3 3 20 1.95 2.4 0.15 5 5 56 3.25 4 0.25 6 6 80 3.9 4.8 0.3 9 9 180 5.85 7.2 0.45 12 12 320 7.8 9.6 0.6 18 18 720 11.7 14.4 0.9 24 24 1,280 15.6 19.2 1.2 48 48 3,800 28.8 38.4 2.4 600 100 100 22,200 65 80 5 450 450 High sensitive type (330 mW) Coil Code Rated Coil Voltage (VDC) Coil Resistance +/- 10% (Ohm) Must Operate Voltage (VDC) * Must Release Voltage (VDC) * 1.5 1.5 6.8 0.97 0.08 3 3 27 1.95 0.15 5 5 80 3.25 0.25 6 6 110 3.9 0.3 9 9 250 5.85 0.45 12 12 440 7.8 0.6 18 18 990 11.7 0.9 24 24 1,780 15.6 1.2 Rated Power (mW) 330 Note: All values in the table are valid for 20C and zero contact current. * Specified operate values are valid for pulse wave voltage. 4 FTR-K1LZ SERIES SERIES n SAFETY STANDARDS Type Compliance Contact rating UL UL 508 Flammability: UL 94-V0 (plastics) E 56140, E 45026 CSA C22.2 No. 14 LR 35579 [LZ-( )W, LZ-( )WS] 0.8A, 240VAC (resistive) 1A, 120VAC / 30VDC (resistive) [LZ-( ), LZ-( )S] 2.5A, 240 VAC (resistive) 3A, 120 VAC / 30VDC (resistive) 1/10hp, 120VAC/240VAC Pilot duty: D150 [LZ-( )H, LZ-( )HS] 4A, 240 VAC (resistive) 5A, 30 VAC resistive) 1/10 HP, 120VAC/2400VAC Pilot duty: D150 [LZ-( )V] 7A, 240 VAC (resistive) 10A, 120 VAC / 30VDC (resistive) 1/4hp, 120VAC/240VAC Also complies with SEV. 5 LZ SERIES FTR-K1 SERIES JV SERIES n CHARACTERISTIC DATA 6 FTR-K1 SERIES LZ SERIES JV SERIES 7 FTR-K1LZ SERIES SERIES n DIMENSIONS l Schematics l Dimensions LZ-M type (Flux proof type) l PC board mounting hole layout (BOTTOM VIEW) LZ-M-K, LZ-M-C type (Plastic sealed type or sealed with tape) Dotted line: Seal tape (LZ-M-C type) LZ type (Flux proof type) LZ-K, LZ-C type (Plastic sealed type or sealed with tape) Dotted line: Seal tape (LZ-C type) 8 FTR-K1 SERIES JV SERIES LZ SERIES RoHS Compliance and Lead Free Information 1. General Information l l l l All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including amendments. Cadmium as used in electrical contacts is exempted from the RoHS directives. As per Annex III of directive 2011/65/EU. All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/downloads/MICRO/fcai/relays/lead-free-letter.pdf Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process. 2. Recommended Lead Free Solder Condition l Recommended solder Sn-3.0Ag-0.5Cu. Flow Solder Condition: Pre-heating: maximum 120C within 90 sec. Soldering: dip within 5 sec. at 255C 5C solder bath Relay must be cooled by air immediately after soldering Solder by Soldering Iron: Soldering Iron Temperature: Duration: 30-60W maximum 350-360C maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. Tin Whiskers l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 9 FTR-K1 SERIES JV SERIES LZ SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Shinagawa Seaside Park Tower 19F, 12-4, Higashi-shinagawa 4-chome, Shinagawa-ku, Tokyo,140-0002, Japan Tel: (81-3) 3450-1681 Fax: (81-3) 3474-2385 Email: fcl-contact@cs.jp.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fujitsu.com/uk/components China Fujitsu Electronic Components (Shanghai) Co., Ltd. Unit 4306, InterContinental Center 100 Yu Tong Road, Shanghai 200070, China Tel: (86-21) 3253 0998 Fax: (86-21) 3253 0997 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components/ North and South America Fujitsu Components America, Inc. 2290 North 1st Street, Suite 212 San Jose, CA 95131, USA Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: us.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components/ Hong Kong Fujitsu Components Hong Kong Co., Ltd. Unit 506, Inter-Continental Plaza No.94 Granville Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: (852) 2881-8495 Tex: (852) 2894-9512 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components/ (c)2015 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users' own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. October 29, 2015 10