Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called"TAIYO YUDEN' s official sales channel"). It is only applicable to the products purchased from any of TAIYO YUDEN's official sales channel. Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export Certain items in this catalog may require specific procedures for export according to"Foreign Exchange and Foreign Trade Control Law"of Japan,"U.S. Export Administration Regulations", and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. 12 notice_e-01 SAW/FBAR DEVICES (FILTER / DUPLEXERS) REFLOW FEATURES APPLICATIONS Low Insertion Loss UMTSW-CDMA High Attenuation GSM Small Size Package CDMA High Reliability with Hermetic Sealing MSL1 LTE Environmentally Conscions GPS Other ORDERING CODE A Previous Rule (applied to products registered on March 31, 2010 or before.) F A R D 6 N F 1 G 9 6 0 0 P 1 B Z Z Family D5 D6 J5 F5 F6 G5 G6 Common sign Fixation Package type Frequency Product type Series Product Frequency Range 700-1000MHz Duplexer Duplexer 1000-5000MHz 700-1000MHz Dual Duplexer Filter 700-1000MHz Filter 1000-5000MHz 700-1000MHz Dual Filter Dual Filter 1000-5000MHz Common sign Fixation Common sign Fixation Serial Number Design Custom, Status Packing B New Rule (applied to products registered on April 1, 2010 or later.) D 6 N F 1 G 9 6 0 P 1 B Z Z _ S D5 D6 J5 F5 F6 G5 G6 Series Product Frequency Range 700-1000MHz Duplexer Duplexer 1000-5000MHz 700-1000MHz Dual Duplexer Filter 700-1000MHz Filter 1000-5000MHz 700-1000MHz Dual Filter Dual Filter 1000-5000MHz Package type Frequency Design Serial Number Product type Packing Custom Custom, Status Status, JIG MP ES Nothing S For further details, please contact to TAIYO YUDEN Co.,Ltd. EXTERNAL DIMENSIONS/STANDARD QUANTITY 2.5x2.0x0.6 8pin 2.5x2.0x0.6 9pin 0.6max 2.50.1 2.5x2.0x0.65 0.6max 2.50.1 2.00.1 2.00.1 index C0.15 4-0.7375 0.9x0.375 4-0.7375 index 4-0.9625 2-0.3 Unitmm 4-0.775 0.9x0.375 4-0.7375 C0.15 C0.15 8-0.375 8-0.425 Unitmm 2-0.325 0.60x0.30 4-0.575 C0.15 8-0.375 8-0.425 1.60.1 index 4-0.9625 2-0.3 8-0.375 0.5max 2.00.1 2.00.1 index 4-0.9625 2.0x1.6x0.5 0.65max 2.50.1 8-0.30 8-0.425 Unitmm 8-0.30 Unitmm This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 184 12 sawfilter01_e-01 1.4x1.0x0.5 1.400.1 1.1x0.9x0.5 1.400.1 0.900.1 0.50 0.40 0.25 index 1.41 0.40 0.25 0.5 Unitmm 0.25 0.25 0.575 0.60 0.325 1.17 0.47 0.20 0.325 1.100.1 index index 0.50 0.5max 1.500.1 0.5max 1.000.1 index 1.5x1.1x0.5 0.5max 1.800.1 1.100.1 0.5max 1.8x1.4x0.5 1.00 0.25 0.2 0.25 0.25 0.25 Unitmm 0.39 0.60 0.39 0.78 0.25 0.24 0.23 0.49 0.18 0.18 Unitmm 0.21 0.18 0.21 Unitmm 2G Frequency Allocation GSM GSM Band 850 900 1800 1900 Region US CN/EU CN/EU US Use GPRS, EDGE GPRS, EDGE GPRS, EDGE GPRS, EDGE Tx MHz 824-849 880-915 1710-1785 1850-1910 Rx MHz 869-894 925-960 1805-1880 1930-1990 3GPP2 Band Class 6 1, 14 8 15 0 13 9 0-3 NameBlock 2G 1.9G 1800 850 800 2.5G 900 1.7G 1.5G Lower 700A,B,C Upper 700C Upper 700D Lower 700B,C New 800 Extended 800 Extended 1.5G Region EU, JP, CN US EU US US JP EU EU JP US JP US US US US JP JP EU JP UseStatus W-CDMA W-CDMA LTE W-CDMA W-CDMA W-CDMA LTE W-CDMA W-CDMA W-CDMA W-CDMA/LTE LTE LTE LTE LTE CDMA2000 or LTE W-CDMA or LTE LTE LTE Tx MHz 1920-1980 1850-1910 1710-1785 1710-1755 824-849 830-840 2500-2570 880-915 1750-1785 1710-1770 1427.9-1452.9 1427.9-1447.9 698-716 777-787 788-798 1900-1920 2010-2025 704-716 815-830 830-845 832-862 1447.9-1462.9 Rx MHz 2110-2170 1930-1990 1805-1880 2110-2155 869-894 875-885 2620-2690 925-960 1845-1880 2110-2170 1475.9-1500.91475.9-1495.9 728-746 746-756 758-768 2600-2620 2585-2600 734-746 860-875 875-890 791-821 1495.9-1510.9 3GPP2 Band Class Name Region UseStatus Tx MHz 1900-1920 2010-2025 1850-1910 1930-1990 1910-1930 2570-2620 1880-1920 2300-2400 Rx MHz 1900-1920 2010-2025 1850-1910 1930-1990 1910-1930 2570-2620 1880-1920 2300-2400 3G Frequency Allocation 3GPP/FDD W-CDMA/LTE 3GPP Band I II III IV V VI VII VIII IX X XI XII XIII XIV XV XVI XVII XVIII XIX XX XXI HIGH FREQUENCY PRODUCTS Name GSM850 EGSM DCS GSM1900 3GPP Band V VIII III II 3GPP/TDD 3GPP Band 33 34 35 36 37 38 39 40 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. sawfilter01_e-01 12 185 3G Frequency Allocation 3GPP2 CDMA2000 3GPP2 Band Class 3GPP Band 0 V 0-2 V 0-3 1 II 2 3 4 5 6 I 7 8 III 9 VIII 10 11 12 13 VII 14 II 15 IV Name CDMA J-CDMA6MHz J-CDMAPlan PCS J-CDMA27MHz K-PCS CDMA450 J-CDMAIMT Secondary PCSG-Band AWS Region US, CN, KR JP JP US JP KR EU JP US US US Use CDMA2000 CDMA2000 CDMA2000 or LTE CDMA2000 CDMA2000 CDMA2000 CDMA2000 CDMA2000 CDMA2000 CDMA2000 CDMA2000 Tx MHz 824-849 824-830 815-824 1850-1910 872-909, 880-915 887-925 1750-1780 452-484 1920-1980 776-794 1710-1785 880-915 817-824 452-484 870-876 2500-2570 1850-1915 1710-1755 Rx MHz 869-894 869-875 860-869 1930-1990 917-954, 925-960 832-870 1840-1870 462-494 2110-2170 746-764 1805-1880 925-960 862-869 462-494 915-921 2620-2690 1930-1995 2110-2155 Name 2G 1.9G CORE XGP Region CN CN JP Use TD-SCDMA TD-SCDMA PHS Tx MHz 2010-2025 1880-1920 2545-2575 Rx MHz 2010-2025 1880-1920 2545-2575 TD-SCDMA, PHS 3GPP Band 3GPP2 Band Class OTHERS Wireless LAN, Bluetooth, GPS System Wireless LAN Wireless LAN Bluetooth GPS Name Block IEEE 802.11 IEEE 802.11a IEEE 802.15.1 Frequency MHz 2400-2483.5 5150-5350 2400-2483.5 1574.42-1576.42 PART NUMBERS Duplexers System W-CDMA I2G CDMA/W-CDMA V850 J-CDMABW:27MHz W-CDMA VIII900 PCS/W-CDMA II1.9G W-CDMA IVDCS/2G LTE XIIIUpper C LTE XVIILower B,C CDMA BC0+BC10 Part number FAR-D6JG-2G1400-D3FZ FAR-D6JH-2G1400-B1BT D6PE2G140P3AW FAR-D5NG-881M50-M11Z FAR-D5PF-881M50-M3E7 FAR-D5NE-881M50-P1A9 FAR-D5NE-881M50-P1A6Q FAR-D5PE-881M50-P3EZ FAR-D5PE-881M50-P3EY FAR-D5PF-911M50-M3J7 FAR-D5NH-942M50-M1Y9 FAR-D5NF-942M50-P1GZ FAR-D5NF-942M50-P1GWQ D5NE942M5P1G9 D5PE942M5P3GT FAR-D6NH-1G9600-M1Z9 FAR-D6NH-1G9600-M1Z6 D6HK1G960DK12 FAR-D6NF-1G9600-P1BT D6NF1G960P1BR D6HH1G960BH95 D6HH1G960BH97 FAR-D6JH-2G1325-B1YZ D6JG2G132D3GZ D6PE2G132P3DW D5NE782M0P1D6 D5NG782M0M15Z FAR-D5NE-740M00-P1C9 D5NG740M0M14Z D5NF878M0P1ET Package Size mm 2.5x2.0x0.65 2.5x2.0x0.65 2.0x1.6x0.5 2.5x2.0x0.6 2.0x1.6x0.5 2.5x2.0x0.6 2.5x2.0x0.6 2.0x1.6x0.5 2.0x1.6x0.5 2.0x1.6x0.5 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.6 2.0x1.6x0.5 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.0x1.6x0.5 2.5x2.0x0.6 2.5x2.0x0.6 2.5x2.0x0.6 2.5x2.0x0.6 2.5x2.0x0.65 Insertion Loss dB 1.4/1.7 1.4/1.7 1.5/1.6 1.45/1.8 1.5/1.8 1.6/1.8 1.6/1.7 1.4/1.7 1.4/1.7 1.5/1.8 1.8/2.3 1.9/2.3 1.9/2.3 1.7/2.0 1.7/2.2 2.2/3.1 2.3/2.7 2.0/2.3 2.5/2.8 2.5/3.4 2.3/2.5 2.6/2.5 1.5/1.7 1.6/1.9 1.9/1.8 2.2/2.2 2.1/2.7 1.7/2.0 1.6/1.7 1.9/2.5 IsolationdB Remarks 54/47 58/48 59/47 66/52 58/51 57/51 60/53 59/52 59/52 61/44 58/50 58/50 59/54 60/53 58/54 55/50 55/53 58/52 54/55 56/53 56/53 59/59 57/51 53/52 55/47 60/55 62/57 61/58 62/56 58/50 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm STD 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type New 9 Pin, A Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 100ohm, New 9 Pin, B Type Rx : Bal.100ohm 9 Pin, A Type Rx : Bal.100ohm 9 Pin, A Type 9 Pin, B Type 9 Pin, B Type 100ohm, STD 9 Pin, B Type 100ohm, GPS High Att. 9 Pin, B Type 100ohm 9 Pin, B Type 100ohm 9 Pin, B Type 9 Pin, B Type Low Rx IL 9 Pin, B Type 9 Pin, B Type 100ohm, Low Rx IL 9 Pin, B Type 100ohm High GPS Att. & Rx Isol. 9 Pin, B Type 100ohm, STD 9 Pin, B Type 100ohm High GPS Att. & Rx Isol. 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 9 Pin B Type Rx : Bal.100ohm This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 186 12 sawfilter01_e-01 PART NUMBERS CDMA/GSM850 System CDMA Tx CDMA/GSM850 Tx CDMA Rx GSM850/CDMA Rx GSM850 Rx Part number FAR-F5KB-836M50-B4ER FAR-F5KB-836M50-B4EG F5QA836M5M2AB FAR-F5KA-836M50-D4DF FAR-F5KB-881M50-B4ED FAR-F5KY-881M50-B4UZ FAR-F5KB-881M50-B4EJ F5QG881M5P2KG FAR-F5KA-881M50-D4DB FAR-F5QA-881M50-M2AF FAR-F5KB-881M50-B4EA FAR-F5QB-881M50-P2BA Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.1x0.9x0.5 Insertion Loss dB 1.7 1.6 1.6 1.9 1.5 1.5 1.4 1.5 1.7 1.6 1.7 1.3 Attenuation dB 44 42 34 44 61 61 64 56 56 46 53 63 Package Size mm 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.1x0.9x0.5 Insertion Loss dB 2.2 2.3 2.0 2.2 1.6 1.6 2.2 Attenuation dB 16 18 34 40 26 28 56 Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 Insertion Loss dB 2.5 2.1 1.5 1.6 Attenuation dB 30 20 14 17 Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 Insertion Loss dB 2.4 2.3 2.4 3.4 3.4 2.1 2.6 2.8 2.0 1.8 1.6 1.5 Attenuation dB 35 28 42 44 43 23 50 50 18 18 18 15 Package Size mm 1.8x1.4x0.5 1.5x1.1x0.5 1.8x1.4x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.8x1.4x0.5 1.5x1.1x0.5 1.8x1.4x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.8x1.4x0.5 1.5x1.1x0.5 1.8x1.4x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.8x1.4x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.8x1.4x0.5 1.5x1.1x0.5 1.8x1.4x0.5 1.5x1.1x0.5 1.8x1.4x0.5 1.5x1.1x0.5 1.8x1.4x0.5 1.5x1.1x0.5 Insertion Loss dB 1.8/1.6 1.6/1.6 1.6/1.8 1.6/1.6 1.5/1.8 1.9/2.2 1.9/2.2 1.8/1.4 1.7/1.4 1.7/2.3 2.2/1.9 2.5/2.0 2.3/1.8 2.4/1.9 1.9/1.7 1.9/1.6 1.7/1.7 1.6/1.2 1.9/1.8 1.9/1.8 1.9/1.8 1.9/1.8 2.5/2.5 2.5/2.5 1.6/1.5 1.6/1.4 Attenuation dB 31/16 31/17 16/31 17/31 50/29 50/25 48/26 31/54 29/51 52/37 25/52 25/55 35/40 32/37 17/13 14/16 15/16 13/15 13/18 15/18 13/18 15/18 20/12 18/13 15/58 14/54 Remarks 100ohm input 200ohm input High Att. type 100ohm output 100ohm, High Att. 200ohm output 100ohm, High Att.,Low Loss type High Att. type 150ohm output 150ohm output EGSM System EGSM Tx FAR-F5KA-897M50-D4DC FAR-F5QA-897M50-M2AC FAR-F5KA-942M50-D4DD F5QA942M5M2AG FAR-F5KB-942M50-B4EB FAR-F5QB-942M50-P2BB FAR-F5QG-942M50-P2KB Remarks High Att. type High Att. type 150ohm output 150ohm output 100ohm, High Att. DCS System Part number DCS Tx FAR-F6KA-1G7475-D4CY FAR-F6KA-1G8425-D4CK FAR-F6KB-1G8425-B4GA FAR-F6QB-1G8425-P2BF DCS Rx Remarks 150ohm output 150ohm output US-PCS/GSM1900 System US-PCS Tx US-PCS Rx GSM1900/US-PCS Rx GSM1900 Rx Part number FAR-F6KA-1G8800-L4AF FAR-F6KB-1G8800-B4GS F6KB1G880B4GH FAR-F6KA-1G9600-D4DQ FAR-F6KA-1G9600-D4MT FAR-F6KB-1G9600-B4GP FAR-F6KY-1G9600-B4UU F6KY1G960B4NF FAR-F6KA-1G9600-D4CR F6KA1G960D4CZ FAR-F6KB-1G9600-B4GB F6QB1G960P2BK Remarks Full band, High Att. 100ohm input 200ohm input High Att. High Att./New 100ohm output 100ohm, High Att. 100ohm output HIGH FREQUENCY PRODUCTS EGSM Rx Part number Low loss type 150ohm output 150ohm output GSM Dual System EGSMDCS Rx DCSEGSM Rx GSM850EGSM Rx GSM850EGSM Rx Common Input EGSMGSM850 Rx EGSMGSM850 Rx Common Input EGSMGSM850 Rx Common Output DCSGSM1900 Rx GSM1900DCS Rx GSM1900DCS Rx Common Input DCS+ GSM1900 Rx (Common Input) GSM1900DCS Rx Common Output GSM1900850 Rx Part number FAR-G6KZ-1G8425-Y4WZ G6QF1G842N2HA FAR-G6KZ-1G8425-Y4WY G6QF1G842N2GC FAR-G5QC-942M50-N2FB FAR-G5KT-942M50-Y4RW FAR-G5QD-942M50-N2DZ FAR-G5KC-942M50-Y4YW FAR-G5QC-942M50-N2CD G5QJ942M5M2MA FAR-G5KT-942M50-Y4RZ FAR-G5QD-942M50-N2DB G5KW942M5Y4YF G5QE942M5N2ED FAR-G6QC-1G9600-N2FA FAR-G6KC-1G9600-Y4YY FAR-G6QC-1G9600-N2CB G6QC1G960N2CH FAR-G6KT-1G9600-Y4RY G6QD1G960N2DA G6KT1G960Y4RU G6QD1G960N2DY G6KW1G960Y4YE G6QE1G960N2EC FAR-G6KG-1G9600-Y4ZF FAR-G6QF-1G9600-N2GA Remarks EGSM 150ohm output DCS 150ohm output EGSM 150ohm output DCS 150ohm output DCS 150ohm output EGSM 150ohm output DCS 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 50ohm output GSM850 50ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output DCS 150ohm output GSM1900 150ohm output GSM1900 150ohm output DCS 150ohm output GSM1900 150ohm output DCS 150ohm output GSM1900 150ohm output DCS 150ohm output GSM1900 150ohm output DCS 150ohm output GSM1900 150ohm output DCS 150ohm output GSM1900 150ohm output DCS 150ohm output DCS 150ohm output GSM1900 150ohm output GSM1900 150ohm output DCS 150ohm output GSM1900 150ohm output DCS 150ohm output GSM1900 150ohm output GSM850 150ohm output GSM1900 150ohm output GSM850 150ohm output This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. sawfilter01_e-01 12 187 PART NUMBERS GPS System GPS GPSGNSS Part number FAR-F6KA-1G5754-L4AA FAR-F6KA-1G5754-L4AJ FAR-F6KA-1G5754-L4AB FAR-F6QA-1G5754-H2JC F6QA1G575H2JD F6QA1G575H2JE FAR-F6KB-1G5754-B4GE FAR-F6KB-1G5754-B4GU F6KB1G575B4HQ FAR-F6KA-1G5859-D4MS FAR-F6KB-1G5859-B4HR Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.1x0.9x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 Insertion Loss dB 0.9 0.9 0.44 1.11 0.87 1.27 1.1 1.2 1.1 1.0 1.2 1.1 1.4 Attenuation dB Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.5x1.1x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.8x1.4x0.5 1.8x1.4x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 Insertion Loss dB 2.2 1.6 2.1 1.8 1.9 1.9 1.7 1.8 1.7 1.9/3.0 2.0/3.2 1.4 1.5 2.6 1.6 1.9 2.4 2.0 1.6/2.0 1.8 1.8 2.1 1.9/2.4 1.6/1.5 1.5 1.6 1.2 1.4 1.7 2.6 2.7 Attenuation dB 36 38 34 38 39 48 39 64 55 48/41 53/42 48 44 38 20 53 29 57 56/50 31 40 40 42/43 42/64 55 50 32 60 52 38 37 Package Size mm 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 Insertion Loss dB 1.8 1.8 1.6 1.4 1.3/1.4 1.6/2.0 2.6 3.0 1.9 2.5 1.9 2.4 2.8 Attenuation dB 40 47 35 36 40 Remarks Low loss type Low loss, High Att. Ultra Low loss type High Att. Low loss type High Att. 100ohm, Low loss 100ohm, High Att. 100ohm, High Att. 100ohm output W-CDMA System W-CDMA I2GTx W-CDMA I2GRx 1900Rx I +II W-CDMA2G J-CDMA2G/B.W.20MHzRx W-CDMA IV1.7G/2GTx W-CDMA VIIIEGSMTx W-CDMA VIIIEGSMRx W-CDMA V (850)+ VIII(900) Rx W-CDMA IX1.7GTx W-CDMA IX1.7GRx W-CDMA V850 I2GTx W-CDMA I2G V850Rx LTE XIIIUpper CTx LTE XIIIUpper CRx LTE XVIILower B,CTx LTE XVIILower B,CRx LTE XX TD LTE XXXVIII Rx TD LTE XL Rx Part number FAR-F6KA-1G9500-D4CD FAR-F6KA-1G9500-D4DG FAR-F6KB-1G9500-B4GJ F6QA1G950M2AA FAR-F6KA-2G1400-D4CG F6KA2G140D4DW FAR-F6KB-2G1400-B4GC FAR-F6KY-2G1400-B4UY F6QG2G140P2KA G6QL2G140M2PA G6QH2G140N2LA FAR-F6KB-2G1200-B4GQ FAR-F6KA-1G7400-D4DE FAR-F5KA-897M50-D4VW F5KA897M5D4MH F5KA942M5D4MYB FAR-F5KB-942M50-B4ES FAR-F5KY-942M50-B4UW G5QH942M5N2LN FAR-F6KA-1G7675-D4CT FAR-F6KA-1G8625-D4DH FAR-F6KB-1G8625-B4GT FAR-G6KG-1G9500-Y4PG FAR-G6KG-2G1400-Y4SH FAR-F5KA-782M00-D4VP FAR-F5KY-751M00-B4UQ FAR-F5KA-710M00-D4VQ FAR-F5KY-740M00-B4UR F5KA847M0D4ML F6KB2G595B4HS F6KB2G350B4HT Remarks Low loss, High Att. 100ohm input Low loss, High Att. High Att. 100ohm output 100ohm, High Att. 100ohm, High Att. 100ohm output 100ohm output High Att. Low Loss High Att. 100ohm output 100ohm, High Att. 100ohm output 100ohm output V850200ohm in I2G200ohm in I2G200ohm out V850200ohm out 100ohm output 100ohm output 150ohm output 150ohm output Other System Part number ISM900B.W.26MHz FAR-F5QA-915M00-M2AK FAR-F6KA-2G0175-D4DR FAR-F6KA-1G9000-D4DS FAR-F6KA-1G9000-D4MZ FAR-G6QJ-2G0175-M2MD G6QJ2G017M2RD FAR-F6KA-2G4418-D4CU FAR-F6KA-2G4418-A4VA FAR-F6KA-2G4500-A4VD F6KA2G436A4VE F6KA2G450A4VF F6KA2G441A4VG F6KA2G466A4VJ TD-SCDMA TD-SCDMA2G1.9G TD-SCDMA (1.9G+2G) Wireless LAN Remarks High Att Low IL 2 IN/2 OUT 1 IN/2 OUT 10dBm 23dBm Low IL,+19dBm BW=72MHz,+24dBm BW=100MHz,+24dBm , Low loss BW=83.5MHz,+24dBm BW=68MHz,+24dBm This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 188 12 sawfilter01_e-01 ELECTRICAL CHARACTERISTICS FAR-D5NF-942M50-P1GWQ Attenuation[dB] 0.0 Mk1: 882.4MHz S21= -1.869dB 2 -20.0 Mk2: 912.6MHz S21= -1.895dB -30.0 Mk3: 927.4MHz S21= -61.812dB -40.0 Mk4: 957.6MHz S21= -54.141dB -50.0 -60.0 4 3 -70.0 1 -10.0 Attenuation[dB] 1 -80.0 Tx to Ant, Ant to Rx 0.0 -20.0 -2.0 -30.0 Mk3: 882.4MHz S32= -64.673dB -3.0 -40.0 Mk4: 912.6MHz S32= -63.538dB -50.0 -60.0 -70.0 3 -90.0 4 2 1 3 -4.0 Tx to Rx Isolation 0.0 Mk2: 912.6MHz S21= -1.895dB S32= -63.538dB 4 Mk3: 925.0MHz S21= -68.590dB S32= -2.815dB -5.0 Mk4: 960.0MHz S21= -54.051dB S32= -2.348dB -6.0 -7.0 -8.0 -90.0 Frequency[MHz] -10.0 Mk1: 882.4MHz S31= -81.875dB -20.0 Mk2: 912.6MHz S31= -65.043dB -30.0 Mk3: 927.4MHz S31= -67.022dB -40.0 -60.0 4 -70.0 -90.0 -10.0 870 880 890 900 910 920 930 940 950 960 970 Frequency[MHz] 2 3 1 -100.0 820 840 860 860 900 920 940 960 980 1000 1020 Frequency[MHz] Pass-bandAnt to Rx Mk4: 957.6MHz S31= -54.321dB -50.0 -80.0 -9.0 -100.0 820 840 860 860 900 920 940 960 980 1000 1020 Pass-bandTx to Ant Mk1: 882.4MHz S21= -1.869dB S32= -64.673dB -1.0 Mk2: 960.0MHz S32= -2.348dB -80.0 -100.0 820 840 860 860 900 920 940 960 980 1000 1020 Frequency[MHz] In-band Characteristic Tx to Rx Isolation These date include loss that comes from the test board.Approximately 0.05dB Mk1: 897.5MHz S21= -1.482dB Ant to Rx (Wide span) 0.0 1 -10.0 -20.0 Mk2: 1575.0MHz S21= -48.665dB -20.0 -30.0 Mk3: 1830.0MHz S21= -52.034dB -30.0 -40.0 Mk4: 2500.0MHz S21= -39.380dB 45 -50.0 2 -60.0 Mk5: 2745.0MHz S21= -37.117dB 3 -70.0 -80.0 Mk2: 1045.0MHz S32= -56.269dB Mk3: 1750.0MHz S32= -60.796dB -40.0 -60.0 Mk4: 4810.0MHz S32= -34.991dB 4 -50.0 2 -70.0 3 -80.0 -90.0 -100.0 Mk1: 942.5MHz S32= -1.916dB -90.0 -100.0 0 600 1200 1800 2400 3000 3600 4200 4800 5400 6000 0 600 1200 1800 2400 3000 3600 4200 4800 5400 6000 Frequency[MHz] Frequency[MHz] Wide-bandTx to Ant Wide-bandAnt to Rx FAR-F6KY-2G1400-B4UY Mk1: 2110.0MHz S21= -1.624dB -2.0 Mk2: 2170.0MHz S21= -1.615dB -30.0 Mk3: 1920.0MHz S21= -67.953dB -3.0 -40.0 Mk4: 1980.0MHz S21= -73.634dB -50.0 Mk5: 2200.0MHz S21= -51.021dB 5 -60.0 -70.0 3 4 -90.0 -100.0 1840 1900 1960 2020 2080 2140 2200 2260 2320 2380 2440 2 -4.0 -5.0 -6.0 0.0 Mk1: 2110.0MHz VSWR1= 1.542 10.0 Mk1: 2110.0MHz VSWR2= 1.564 9.0 Mk2: 2170.0MHz VSWR1= 1.551 9.0 Mk2: 2170.0MHz VSWR2= 1.525 8.0 8.0 7.0 7.0 6.0 6.0 5.0 5.0 4.0 4.0 -8.0 3.0 3.0 -9.0 2.0 2.0 Frequency[MHz] Pass-band Characteristic 11.0 10.0 -7.0 -10.0 2080 2092 2104 2116 2128 2140 2152 2164 2176 2188 2200 Frequency[MHz] In-band Characteristic 1.0 1 2 2080 2092 2104 2116 2128 2140 2152 2164 2176 2188 2200 1.0 1 2 2080 2092 2104 2116 2128 2140 2152 2164 2176 2188 2200 Frequency[MHz] Frequency[MHz] VSWR INPUT VSWR OUTPUT Mk1: 2140.0MHz S21= -1.303dB 1 -10.0 1 11.0 VSWR Attenuation[dB] 2 Attenuation[dB] -1.0 Mk2: 2170.0MHz S21= -1.615dB -80.0 Attenuation[dB] 0.0 Mk1: 2110.0MHz S21= -1.624dB 1 VSWR 0.0 -20.0 -10.0 HIGH FREQUENCY PRODUCTS Attenuation[dB] Tx to Ant (Wide span) 0.0 1 -10.0 Attenuation[dB] Mk1: 925.0MHz S32= -2.815dB 2 Attenuation[dB] Ant to Rx 0.0 -10.0 Attenuation[dB] Tx to Ant -20.0 Mk2: 925.0MHz S21= -61.972dB -30.0 Mk3: 1950.0MHz S21= -69.270dB -40.0 Mk4: 2500.0MHz S21= -54.864dB -50.0 5 -60.0 4 Mk5: 6000.0MHz S21= -45.717dB 2 -70.0 3 -80.0 -90.0 -100.0 0 600 1200 1800 2400 3000 3600 4200 4800 5400 6000 Frequency[MHz] Wide-band Characteristic This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. sawfilter01_e-01 12 189 PACKAGING Reel size Minimum Quantity Size Type mm 3.0x2.5 Duplexer 2.5x2.0 2.0x1.6 2.0x1.6 Single 1.4x1.0 Filter 1.1x0.9 2.0x1.6 Dual 1.8x1.4 Filter 1.5x1.1 Code&Quantity Pieces Z Z Z Z Z 3000 3000 3000 3000 3000 Z Z 3000 3000 U U J 5000 J 5000 10000 10000 Y Y Y Y Y Y Y 15000 15000 15000 15000 15000 15000 15000 C B A W1 Tape material W2 1.75/-0.1 2.00/-0.05 component fixed area Blank portions 8.0/-0.2 Blank portions Material of Reel Material : PolystyreneCarbon Characteristics : Conform to EIAJ-ET-7200A Color : Black Surface resistance reference value:109/sq Max. 3.50/-0.05 4.0/-0.1 a c 400mm or more e 15.7inch or more 4.0/-0.1 240mm min Unitmm Direction of tape feed Code Quantity A B C W1 W2 Z 3,000 pcs 180.0 +0.0 / 1.5 66.0 0.5 13.0 0.2 9.0 +1.0 / 0.0 11.4 1.0 J U 5,000 pcs 10,000 pcs 180.0 +0.0 / 1.5 330.0 2.0 66.0 0.5 100.0 1.0 13.0 0.2 13.0 0.2 9.0 +1.0 / 0.0 9.4 1.0 11.4 1.0 13.4 1.0 Y 15,000 pcs 330.0 2.0 100.0 1.0 13.0 0.2 9.4 1.0 13.4 1.0 Unitmm Taping dimensions Size mm 3.0x2.5 Duplexer 2.5x2.0 2.0x1.6 2.0x1.6 Single 1.4x1.0 Filter 1.1x0.9 2.0x1.6 Dual Filter 1.8x1.4 1.5x1.1 Type a b c 3.40.1 2.80.1 2.40.1 2.40.1 1.70.1 1.30.1 2.40.1 2.20.1 1.80.1 2.850.1 2.30.1 2.00.1 2.00.1 1.30.1 1.10.1 2.0 1.8 1.4 1.050.05 1.5+0.1/0 1.050.05 1.050.05 0.50.05 0.50.05 1.050.05 0.50.05 0.50.05 d e f 1.550.05 1.00.1 0.250.05 1.5+0.1/0 1.0+0.1/0.0 0.250.05 1.5+0.1/0 0.90 0.05 0.250.05 1.5+0.1/0 0.90 0.05 0.250.05 1.5+0.1/0 0.630.05 0.200.05 1.550.05 0.630.05 0.200.05 1.5+0.1/0 0.90 0.05 0.250.05 1.550.05 0.80.1 0.300.05 1.5+0.1/0 0.70.1 0.250.05 Reel label and Reel C-Label sticking and Winding method Surface Reel Label Unitmm Material of Tape Conductive Tape : Polystyrene Top cover tape : Polyethylene terephthalate PET and Polyethylene Reel C-Label Reel side Top Tape Strength The top tape requires a peel-off force of 0.1 to 1.0N in the direction of the arrow as illustrated below. 015 Top cover tape INDEX Leading Edge Tape This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. sawfil_reli-PRP1 12 sawfil_reli_e-01 RELIABILITY DATA Filter 1. Terminal stregth Specifications Conditions No damage to be found. Bending Test. according to IEC60068-2-21(JISC60068-2-21) 340 Board 1.60.20 Solder 452 2. Mechanical shock Specifications Conditions Device 452 After testing, meet the specified characteristics at a room temperature. Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. according to IEC68-2-27(JISC60068-2-27). 3. Vibration Specifications Conditions After testing, meet the specified characteristics at a room temperature. With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specifications Conditions After testing, meet the specified characteristics at a room temperature. Drop 3 times onto concrete floor from the height of 1.0m. 5. Drop 2 Specifications Conditions After testing, meet the specified characteristics at a room temperature. Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. 6. Temperature cycling Specifications Conditions After testing, meet the specified characteristics at a room temperature. Temp. range 40 to 100. 500cycle. . Static humidity Specifications Conditions After testing, meet the specified characteristics at a room temperature. 85, 90% to 95%RH, apply DC5V, 1000hours. 8. High temperature storage life Specifications Conditions After testing, meet the specified characteristics at a room temperature. 100, 1000hours. 9. Low temperature storage life Specifications Conditions After testing, meet the specified characteristics at a room temperature. 40, 1000hours. 10. Solderbility 1 More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Lead-free Solder paste, ReflowPeak temperature 245 Specifications Conditions 11. Solderbility 2 More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Sn-Pb Solder paste, ReflowPeak temperature 235 Specifications Conditions 12. Solder heat resistance After testing, meet the specified characteristics at a room temperature. A change of the remarkable appearance do not have it. Temperature profile of reflow soldering is as follows (Figure). Specifications Conditions Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details. Temperature Ambient temperature 300 250 200 3050sec. Temperature in heat condition : 230min. 50sec. max. Temperature of upper surface of package and PCB surface. : 260min. 10sec. max. rise slope : 1~4/sec. Pre-Heating 150~180 150 Ambient temperature cool slope : 1~4/sec. 100 50 50~110sec. 10sec. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. sawfil_reli-PRP2 12 sawfil_reli_e-01 RELIABILITY DATA Duplexer 1. Terminal stregth Specifications Conditions No damage to be found. Bend width 4mm, hold for 5/1 sec. according to IEC60068-2-21(JISC60068-2-21) 340 Board 1.60.20 Solder 452 2. Mechanical shock Specifications Conditions Device 452 After testing, meet the specified characteristics at a room temperature. Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. according to IEC68-2-27(JISC60068-2-27). 3. Vibration Specifications Conditions After testing, meet the specified characteristics at a room temperature. With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specifications Conditions After testing, meet the specified characteristics at a room temperature. Drop 3 times onto concrete floor from the height of 1.0m. 5. Drop 2 Specifications Conditions After testing, meet the specified characteristics at a room temperature. Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. 6. Temperature cycling Specifications Conditions After testing, meet the specified characteristics at a room temperature. Temp. range 40 to 100. 500cycle. . Static humidity Specifications Conditions After testing, meet the specified characteristics at a room temperature. 85, 90% to 95%RH, apply DC5V, 1000hours. 8. High temperature storage life Specifications Conditions After testing, meet the specified characteristics at a room temperature. 100, 1000hours. 9. Low temperature storage life Specifications Conditions After testing, meet the specified characteristics at a room temperature. 40, 1000hours. 10. High Temperature Bias Specifications Conditions After testing, meet the specified characteristics at a room temperature. 50, 29dBm, 50000hours. 11. Solderbility 1 More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Lead-free Solder paste, ReflowPeak temperature 245 Specifications Conditions 12. Solderbility 2 More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Sn-Pb Solder paste, ReflowPeak temperature 235 Specifications Conditions 13. Solder heat resistance After testing, meet the specified characteristics at a room temperature. A change of the remarkable appearance do not have it. Temperature profile of reflow soldering is as follows (Figure). Specifications Conditions Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details. Temperature Ambient temperature 300 250 200 3050sec. Temperature in heat condition : 230min. 50sec. max. Temperature of upper surface of package and PCB surface. : 260min. 10sec. max. rise slope : 1~4/sec. Pre-Heating 150~180 150 Ambient temperature cool slope : 1~4/sec. 100 50 50~110sec. 10sec. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. sawfil_reli_e-01 12 sawfil_reli-PRP3