Outline
Features
Principal
Applications
Electrical
Characteristics
AKX series provide connectors for Small Form Factor Pluggable (SFP),
which support optical communications. The connector consists of a
connector body and a cage, the body is the host connector for SFP
transceivers, which is a connector for high-speed transmission designed
for differential transmission. Further, there are two ways of mounting the
cage on PCB, solder type and press-in type. Furthermore, both the
connector and the cage conform to Multi-Source Agreement (MSA).
Connector (Part No. AKX-20LFY)
•
Provides 0.8 mm pitch, 20 contacts
•
Utilizing roll-surface contact improves and maintains high reliability and
high durability.
•
Achieves high-speed transmission
•
Achieves a low insertion loss due to impedance matching
•
Achieves a low reflection attenuation
Cage (Part No. AKX-CG/AKX-CGP)
•
The cage consists of an upper cage and an lower cage. The press-in type
cage is factory-shipped after assembling and soldering the cage halves.
The solder type cage can be factory-shipped after ether way of
assembling and soldering, or cages can be provided disassembled.
•
Factory-shipped assembly of the cage maintains the strength of the cage
due to soldering at 6 points.
•
Because the solder type cage has a half-lock structure with PCB, the
assurance of workability is given.
•
Ensure popping out of transceiver
Communications equipment
AKX series
Connectors for SFP transceivers
(Conforms to MSA standard)
Rated voltage
Rated current
Temperature range
Humidity
30V AC (r.m.s.)
0.5A or less/contact
-40 to +85˚C
85% RH, or less
Document Disclaimer
When placing orders with us, minimum order quantities are set for every product.
Be sure to contact us before starting preliminary design of PCBs using our connectors.
The specifications and information shown in the catalog are subject to change without notice.
High Speed
Connectors