Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current Data Sheet 1 EMIFILr (Capacitor type) Single Circuit Type for Large Current NFM21PS Series (0805 Size) c Dimensions c Insertion Loss Characteristics (Main Items) (50 - 50) 0 1.20.3 0.850.1 1.250.1 Insertion Loss (dB) 2.00.2 20 0.60.2 (2) 0.2+0.2 -0.1 (1) (3) (2) NFM21PS106B0J3 60 80 0.2+0.2 -0.1 0.2 min. 40 100 0.1 : Electrode 1 (in mm) c Equivalent Circuit 10 100 Frequency (MHz) 1000 6000 c Packaging Input (Output) (1) Code Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 500 Output (Input) (3) No polarity. GND (2) c Rated Value (p: packaging code) Part Number NFM21PS106B0J3p Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range 10F 20% 4A 6.3Vdc 50M ohm -40 to +85C Number of Circuit: 1 c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2013.11.11 http://www.murata.com/