3M™ Fibrlok™ 250µm Fiber Splice 2540G
Description
3M™ Fibrlok™ 250µm Fiber Splice helps enable fast, easy splicing of 250µm
singlemode fiber in Fiber-to-the-Premises (FTTP) installations. It can also be used
in multimode LAN installations where 250µm coated fiber is spliced. This low-loss
reliable splice can be installed by non-specialized technicians.
After the fiber is inserted, the assembly tool depresses the activator cap to
align and lock the fibers in place.
Applications
• Inside or outside buildings
• Fiber closures and terminals
• FTTP drop cables
A fraction of the Tooling Cost
The simple, rugged 3M™ Fibrlok™ Splicing Tool is inexpensive and portable. It
requires no electrical power and can be used in any environment. Several crews
can be equipped for less than the cost of a single fusion splicer.
3M™ Fibrlok™ 250 µm Fiber Splice
Features Benefits
Low loss and back reflection Reliable high-yield splices
Simple splicing process Increased installation rate
Strong fiber retention Prevents fiber movement for stable performance
Superior matching gel Maintains quality of transmission over time
Rugged portable splice tool Low expense to equip crews
Small size splice Fits into most fusion splice trays
3
3M™ Fibrlok™ Splicing Tool
Before actuation After actuation
Cross-sectional view of actuated splice
Video Controls
Play Pause Stop
3
Communication Markets Division
3M Telecommunications
6801 River Place Blvd.
Austin, TX 78726-9000
800/426 8688
Fax 800/626 0329
www.3MTelecommunications.com
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed
to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications,
or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 12 months from the date of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective
within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the
3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether indirect, special, incidental or
consequential regardless of the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2007. All rights reserved.
80-6113-1563-3
3M and Fibrlok are trademarks of 3M Company.
3M™ Fibrlok™ 250µm Fiber Splice 2540G
Specifications
Fiber Type 125µm fiber, 250µm coating
Dimensions 4mm x 4mm x 36mm (0.16” x 0.16” x 1.42”)
Operating temperature -40ºC to 75ºC (-40ºF to 167ºF)
Pull out strength 4.4N (1.0 lbf) minimum
Mean Insertion loss <0.1dB mean
Wavelengths 1310nm, 1490nm, 1550nm, 1625nm
Reflection < -40dB typical
Ordering Information
Product Number Description Pkg
2540G Fibrlok 250µm Fiber Splice 5/pkg, 60 MOQ
2504G Fibrlok 250µm Assembly Tool 1/pkg
2559 Fibrlok Splice Kit 1/pkg
2559-C Fibrlok Splice Kit with Cleaver 1/pkg
2534 Fiber Cleaver 1/pkg
