Dimensions in mm Connectors according to DIN 41612 / IEC 60603-2 Type C Female connector Hole pattern Press-fit technology - Performance level II Termination length No. of Contact contacts arrangement 32 Note - * Rear mating zone performance level II a b c 104-60014-xx 4 48 96 104-65016-xx 104-60044-xx 104-65045-xx 104-65046-xx Options - Without flange - Contact arrangement (see page 162) 3 2 1 a b c 4 3 2 1 4 3 2 1 a b c Accessories - Press-fit tool (see page 208) - Support tool (see page 209) - Coding accessories (see page 160) - Shroud (see page 158) 98 104-65015-xx 3 2 1 a b c 4 64 Part number 304-60054-02 304-65055-03 304-65056-04 304-60064-02 304-65065-03 304-65066-04 On request - Performance levels I + III or customer-specific - Special contact length - Alternative surface Sn, e. g. for WireWrap Cross reference - Type C with switching function (see page 155) - VMEx (see page 152) - Type C with IDC (see page 157) Ordering note Only for 104 - PCB 1.5 to 2.0 mm = xxx-xxxxx-01 with termination length = 3.2 mm - PCB 2.0 to 2.8 mm = xxx-xxxxx-02 with termination length = 4.6 mm - PCB > 2.8 mm = xxx-xxxxx-03 with termination length = 4.6 mm ept GmbH I Phone +49 (0) 88 61/25 01 0 I Fax +49 (0) 88 61/55 07 I E-mail sales@ept.de I www.ept.de Connectors according to DIN 41612 / IEC 60603-2 Type C Female connector Solder technology - Performance level II Termination length Manual soldering with solder lug No. of Contact contacts arrangement 32 48 64 a b c 4 3 2 1 4 3 2 1 a b c a b c 4 96 3 2 1 a b c 4 3 2 1 Accessories - Coding accessories (see page 160) Part number 104-40014 - - 104-40016 - 104-40044 - - 104-40046 - 304-40054-05 304-40054-01 304-40054-02 304-40055-03 104-40115 304-40065-03 104-40075 in THTR* in THTR* in THTR* 304-40054-05TH 304-40054-01TH 304-40054-02TH 304-40064-05 304-40064-01 304-40064-02 in THTR* in THTR* in THTR* 304-40064-05TH 304-40064-01TH 304-40064-02TH On request - Performance levels I + III or customer-specific - Special contact length - Other termination lengths in THTR Cross reference - Type C with switching function (see page 155) - VMEx (see page 152) - Type C with IDC (see page 157) Options - Board lock (see page 159) - Contact arrangement (see page 162) Note - * THTR (Through Hole Technology Reflow) ept GmbH I Phone +49 (0) 88 61/25 01 0 I Fax +49 (0) 88 61/55 07 I E-mail sales@ept.de I www.ept.de 99