HRMJ-U.FLP(40) - HIROSE ELECTRIC

U.FL Series

2019.6⑥

1.9

(MAX 2.0)

2.3

(MAX 2.4)

2.4

(MAX 2.5)

(MAX 3.2)

U.FL-LP(V)-040HF

U.FL-LP-062HF

U.FL-LP-088HF

U.FL-LP-040HF

U.FL-LP-066HF

U.FL-LP-068HF

E.FL-LP-040

E.FL-LP-066

U.FL E.FL

Plug

2.4 (2.5 Max)2.4 (2.5 Max)1.9 (2 Max)2.3 (2.4 Max)2.3 (2.4 Max)

Dia 0.81

Dia 0.95

Dia 1.37

Dia 1.32

Dia 1.13

U.FL-LP-040HF

U.FL-LP-066HF

U.FL-LP-068HF

U.FL-R-SMT-1

U.FL-LP(V)-040HF

U.FL-LP-062HF

U.FL-LP-088HF

■Features

Nominal mated height of 1.9 or 2.3mm, 2.4mm

(Max. 2.0 or 2.4mm, 2.5mm)

(Fig.1)

2. Small mounting area

The receptacle occupies an area of 7.7mm2.

3. Light weight

Receptacle : 15.7mg

4. Supports high frequency up to 6GHz

To meet the frequency requirements of a wide

variety of miniature devices, the connectors offer

high frequency performance from DC to 6GHz, with

a V.S.W.R. of 1.3 to 1.5 max.

5. Automatic board placement

Packaged on tape-and-reel the receptacles can be

placed with vacuum nozzles of the automatic

placement equipment.

Plugs are terminated with ultra-fine

coaxial (fluorinated resin insulated) cable

Standard ultra-fine coaxial cable of 0.81mm diameter

(single braid shielding) is used for the plug

termination, assuring secure and stable connections.

7. Simple connector mating / unmating

Use of available extraction tool assures correct

disconnection of the plug and receptacle.

8. Verification of the fully mated condition

Tactile click sensation confirms fully mated

condition, assuring complete electrical and

mechanical connection.

Halogen-free*(Receptacle,plug(HF type))

*As defined by IEC61249-2-21

Br-900 ppm maximum, Cl-900 ppm maximum,

Cl+Br combined-1,500 ppm maximum

Mated height comparison (with E.FL series)

●Space Factor of Mated Connector

Up to 6GHz

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm,

2.4mm Mated Height

Fig.1

Fig.2

In cases where the application will demand a high level of reliability, such as automotive,

please contact a company representative for further information.

Jun.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

Note 1 : Cable type connectors were measured with SMA conversion

adapters attached to both ends of the harness product of a

suitable 100cm cable.

Note 2 : Board type connectors were mounted to a 50ø glass epoxy

board and measurements were conducted with SMA

conversion adapters attached.

■Product Specifications

Ratings

Nominal characteristic impedance

Frequency range

50ø

DC to 6GHz

Operating temperature range

Operating humidity

-40˚C to +90˚C

90%RH max.

Storage temperature range

Storage humidity

-30˚C to +70˚C

90%RH max.

Item Specification Conditions

1. Contact resistance Center : 20mø max.

Outer : 10mø max.

10mA max.

2. Insulation resistance 500Mø min. 100V DC

3. Withstanding voltage No flashover or insulation breakdown. 200V AC / 1 minute

4. V.S.W.R.*

Part No. Up to 3GHz 3 to 6GHz

U.FL-LP-040HF dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.35 Max

U.FL-LP(V)-040HF dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.3 Max

U.FL-LP-068HF dia.1.13mm Coaxial Cable Assembly 1.3 Max 1.4 Max

U.FL-LP-066HF dia.1.32mm Coaxial Cable Assembly 1.3 Max 1.5 Max

U.FL-LP-062HF dia.0.95mm Coaxial Cable Assembly 1.3 Max 1.3 Max

U.FL-LP-088HF dia.1.37mm Coaxial Cable Assembly 1.3 Max 1.4 Max

5. Durability

(mating / un-mating,

with corresponding

plug)

Contact resistance

Center : 25mø max.

Outer : 15mø max.

30 cycles

6. Vibration No electrical discontinuity of 1µs min.

No damage, cracks or parts dislocation.

Frequency : 10 to 100Hz, single amplitude of 1.5mm,

acceleration of 59m/s

, for 5 cycles in the direction of each

of the 3 axis.

7. Shock Acceleration of 735m/s2, 11ms duration, sine half-

wave waveform, 3 cycles in each of 3 axes.

8. Humidity

(Steady state)

No damage, cracks or parts dislocation.

Insulation resistance 10Mø min.(humidity high)

Insulation resistance 500Mø min.(dry)

96 hours at temperature of 40ç and humidity of 95%.

9. Temperature cycle

No damage, cracks or parts dislocation.

Contact resistance : 25mø max. (Center)

15mø max. (Outer)

Temperature : -40˚C/+5 to +35˚C/+90˚C/+5 to +35˚C

Time : 30min. / 3min. / 30min. / 3min.

5 cycles

10. Salt spray No excessive corrosion 5% salt water solution, 48 hours

*V.S.W.R. Measurement System

The above V.S.W.R. standard values were measured using the measurement connection shown below.

■Material / Finish

●Plug-right angle

Part Material Finish/Remarks

Shell Phosphor bronze Silver plated

Insulator PBT, Color : Gray UL94HB (LP (V) -040HF)

LCP, Color : Milky-white UL94V-0(040HF,066HF, 068HF, 062HF, 088HF)

Female center contact Phosphor bronze Gold plated

●Receptacle

Part Material Finish/Remarks

Shell Phosphor bronze Silver plated

Insulator LCP, Color: Milky-white UL94V-0

Male center contact Brass Gold plated

Jun.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

■Receptacles

GND GND

SIG

Ø2

2.6

0.6

1.25

0.35

1.2Max(Note)

(3.1)

2.6

1.8

GND

U.FL-R-SMT-1

SIG

1.05±0.05 1±0.05

1±0.05

2.2±0.05

4±0.05

1.9±0.05

No conductive traces in this area

Recommended PCB

Mounting Pattern

Part No. HRS No. Packaging Weight / EA

U.FL-R-SMT-1(01)

331-0472-2 01 100 pcs/pack

15.7/mg

U.FL-R-SMT-1(60)

331-0472-2 60 4,000 pcs/reel

U.FL-R-SMT-1(80)

331-0472-2 80 10,000 pcs/reel

Note : This area may be covered by insulating material.

Embossed Carrier Tape Dimensions(IEC 60286-3 compliant)

Embossed Carrier Tape Dimensions

U.FL-R-SMT-1(60): 8mm pitch

U.FL-R-SMT-1(80): 4mm pitch

Reel Dimensions

Ø1.5

1.75

5.5

Center contact

Ø1.5

5.5 1.75

24Center contact

Unreeling direction

φ330

13.5

Material：

(Black)

(

SCALE FREE

)

Jun.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

■Cable Assembly (Plug)

●Cable Guide

Dia.0.81mm

Coaxial Cable

04 7/0.05 SA

(AWG#36)

Dia.0.4mm

FEP

Single

Shield TA

Dia.0.81mm

FEP 5.4dB/m 8.0dB/m

Dia.1.13mm

Coaxial Cable

068 7/0.08 SA

(AWG#32)

Dia.0.68mm

FEP

Single

Shield TA

Dia.1.13mm

FEP 3.73dB/m 5.44dB/m

Dia.1.32mm

Coaxial Cable

066 7/0.08 SA

(AWG#32)

Dia.0.66mm

FEP

Double

Shield TA

Dia.1.32mm

FEP 3.8dB/m 5.6dB/m

Dia.0.95mm

Coaxial Cable

062 7/0.071 SA

(AWG#33)

Dia.0.62mm

FEP

Tape, single

Shield TA

Dia.0.95mm

FEP 3.1dB/m 4.4dB/m

Dia.1.37mm

Coaxial Cable

Dia.1.37mm

Coaxial Cable

(data as provided by cable suppliers, for reference only)

* SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire

088

7/0.102 SA

(AWG#30)

7/0.102 SA

(AWG#30)

Dia.0.88mm

FEP

Dia.0.88mm

FEP/PTFE

Single

Shield TA

Tape, Single

Shield TA

Dia.1.37mm

FEP

Dia.1.37mm

FEP

2.8dB/m

2.5dB/m

4.3dB/m

3.4dB/m

Description

Cable

Type

Cable Specification

Inner

Conductor*

Dielectric

Diameter

Outer

Conductor*

Jacket

Diameter

Flame Retardant

Grade

Nominal attenuation

At 3GHz

1.85

3.4

2.8

1.5

2.8

1.8

1.93

[Plugs can be ordered only as terminated cable assemblies.]

Part No.

Size

U.FL-LP-040HF U.FL-LP-066HF

U.FL-LP-068HF

U.FL-LP(V)-040HF(06)

U.FL-LP-062HF(06) U.FL-LP-088HF(06)

Mated Height 2.5mm Max.

(2.4mm Nom.)

2.5mm Max.

(2.4mm Nom.)

2.0mm Max.

(1.9mm Nom.)

2.4mm Max.

(2.3mm Nom.)

2.4mm Max.

(2.3mm Nom.)

Applicable

cable Dia. 0.81mm Dia. 1.13mm and

Dia. 1.32mm Dia. 0.81mm Dia. 0.95mm Dia. 1.37mm

Weight (mg) 54 59 35 45.5 72

Environmental

compliant

Halogen-free, RoHS2 compliant

VW-1

At 6GHz

Jun.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

■The Procedure for ordering patch cord

Please select the specifications in 3 steps. No need product name for ordering patch cords.

■Patch cord name example

Please specify the red text part.

STEP 1 : Single end or both ends

STEP 2 : Cable and mating height

INSERTION LOSS (dB)

Frequency (GHz)

-1

-2

-3

-4

-5

-6

-7

-8

-9

123456

Ø1.37

Lowloss type

Ø1.37

Lowloss type

Ø1.32

Insertion Loss comparison

between each cable size

【dB/m】

Ø1.13Ø1.13

Ø0.81

Ø1.37Ø1.37

Ø0.95

STEP 3 : Cable length (mm)

●Standard tolerances for (L)

(L)(mm) Standard tolera(mm)

*L=35 to 200 ±4

L=201 to 500 ±8

L=501 to 1000 ±12

L=Longer than 1000 ±1.5% of (L)

Note : Minimum available length(L) is 35mm.

［Single ended cable assembly］

Ordering information

［Double ended cable assembly］

［Double ended］

U.FL-2LPHF6-04N1TV-A-300

Cable length is written in millimeters at the end.

EX : 300mm

U.FL-2LPHF6-088N1T-A-300

1 Cable-mating height

［Dia. 1.37 cable (088 cable)］

088 is listed in the third block representing the cable type.

U.FL-2LPHF6-088N1T-A-300

［Dia. 1.32 cable (066 cable)］

066 is listed in the third block representing the cable type.

U.FL-2LPHF6-066N1-A-300

［Dia. 1.13 cable (068 cable)］

068 is listed in the third block representing the cable type.

U.FL-2LPHF6-068N1T-A-300

［Dia. 0.95 cable (062 cable)］

062 is listed in the third block representing the cable type.

U.FL-2LPHF6-062N1D-A-300

［Dia. 0.81 cable (040 cable)］

04 is listed in the third block representing the cable type.

When the height is 1.9mm, V enters affer LP.

Dot does not needed for U.FL series name.

U.FL-2LPHF6-04N1TV-A-300 : Mating height 2.4mm

UFL-2LPVHF6-04N1TV-A-300 : Mating height 1.9mm

2 Cable color

〜Except Dia. 0.81 cable〜

［Gray］

1 is listed in the third block representing the cable type.

U.FL-2LPHF6-062N1D-A-300

［Black］

2 is listed in the third block representing the cable type.

U.FL-2LPHF6-062N2D-A-300

〜Dia. 0.81 cable〜

［White］

1 is listed in the third block representing the cable type.

U.FL-2LPHF6-04N1TV-A-300

［Black］

2 is listed in the third block representing the cable type.

U.FL-2LPHF6-04N2TV-A-300

［Single ended］

U.FL-LPHF6-04N1TV-A-300

No. Jacket diameter Cable color Mating height

1 Dia. 1.37mm Gray / Black 2.3mm

2 Dia. 1.32mm Gray / Black 2.4mm

3 Dia. 1.13mm Gray / Black 2.4mm

4 Dia. 0.95mm Gray / Black 2.3mm

5 Dia. 0.81mm White / Black 2.4mm / 1.9mm

U.FL-2LPHF6-04N1TV-A-300

STEP 1

STEP 3

STEP 2

Cable length : STEP 3

Cable type : STEP 2

Double ended or single ended : STEP 1

Series name

Jun.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

■Conversion Adapters

●SMA Conversion Adapter

(Mating portion: U.FL side jack - SMA side plug)

Note :

The U.FL side mating portions has a lower lock retention

force than the regular product, therefore, cannot be used

for purposes other than performance measurements.

■Receptacle to Inspection

This receptacle is used for inspecting the continuity, withstand

voltage, and other aspects of the harness product.

Note : Part No. U.FL-LP-N-2 for U.FL-LP-040HF/066HF/088HF/068HF.

Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040HF/U.FL-LP-062HF.

Plug Extraction Tool

This tool is used for extraction from a mating condition.

Plug Insertion Tool

This tool is for mating U.FL series plug into receptacle.

●SMA Conversion Adapter

(Mating portion: U.FL side plug - SMA side jack)

Note :

The U.FL side mating portions has a lower lock retention

force than the regular product, therefore, cannot be used

for purposes other than performance measurements.

●SMA Conversion Adapter

(Mating portion: U.FL side plug - SMA side jack)

Note : This connector is used by compressing the mated

portion of U.FL side onto the U.FL-R-SMT-1 portion.

(10.7) 8HEX

14.05

Ø6.35

1/4-36UNS-2A

6 5.6(4.05)

(18.6)

1/4-36UNS-2A

65.5

(4)

12.9

57HEX

M5∞0.5

(7.9)

(4.4)

U.FL

MARKING

U.FL

U.FL/V

Ø15

(90)

2.1

(12.9)

JAPAN

For distinction with

W.FL-LP-IN.

8 Ø10

Part No. HRS No.

HRMP-U.FLJ(40) 311-0300-2 40

Part No. HRS No.

HRMJ-U.FLP(40) 311-0301-5 40

Part No. HRS No.

HRMJ-U.FLP-ST1(40)

311-0385-5 40

Part No. HRS No.

U.FL-R-1 331-0466-0

Part No. HRS No.

U.FL-LP-N-2 331-0494-5

U.FL-LP(V)-N-2 331-0493-2

Part No. HRS No.

U.FL-LP-IN 331-0334-9

Jun.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

Usage Precautions

1. Plugs

(1) Mating / unmating

(2) Pull forces on the cable

after connectors are

mated.

(3) Precautions

1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the

connector flanges and pull off vertically, in the direction of

the connector mating axis.

2) To mate the connectors, the mating axes of both connectors

must be aligned and the connectors can be mated. The

"click" will confirm fully mated connection.Do not attempt to

insert on an extreme angle.

After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the

diagram below.

Do NOT forcefully twist or deform wires.

(1) Recommended reflow

temperature profile

(3) Recommended metal

mask thickness

(4) Reflow cycles

0.1 to 0.12mm

2 times

(2) Recommended manual

soldering

2. Receptacles

The temperature of the printed circuit

board surface temperature at the

points of contact with the terminals.

w Reflow soldering should be

performed at a printed circuit surface

temperature of 250°C max.

e In individual applications the actual

temperature may vary, depending on

the solder paste type, volume /

thickness and board size / thickness.

Consuly your solder paste and

equipment manufacturer for specific

recommendations.

(1) Operating environment

The connectors are not designed to operate in the following environments :

• Exposed to a excessive amounts of fine particles and dust

• Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive

gasses.

• Environments having large rapid variations in temperature.

(2) Storage conditions -

Receptacle

Store in the Hirose Electric packaging.

Temperature : -10 to +40ç, Humidity : 85% max.

Use within 6 months of delivery.

Receptacles for which the storage period has elapsed must be tested for solderability to the PC board

mounting surface.

3. Operating environment and storage conditions

Extraction Tool

U.FL-R-SMT-1

U.FL Cable

Assembly

100

120

140

160

180

200

220

240

260

[ç]

Preheat

(130 to 180ç)

230ç

220ç

50 seconds max.

120 seconds max.

60 seconds max.

Time

250 ç max. for

10 seconds

1N max (U.FL-LP(V)-040HF, U.FL-LP-062HF)

2N max (U.FL-LP-040HF, U.FL-LP-066HF, U.FL-LP-068HF, U.FL-LP-088HF)

1N max (U.FL-LP(V)-040HF, U.FL-LP-062HF)

2N max (U.FL-LP-040HF, U.FL-LP-066HF, U.FL-LP-068HF, U.FL-LP-088HF)

3N max (U.FL-LP(V)-040HF, U.FL-LP-062HF)

4N max (U.FL-LP-040HF, U.FL-LP-066HF, U.FL-LP-068HF, U.FL-LP-088HF)

U.FL-LP

Cable Assembly

U.FL-R-SMT-1

Manual soldering : 350˚C for 5 seconds

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

1/4-36UNS-2A

8HEX

4.5 8

■SMA cable type

SMA

Straight Plug

Straight Jack

Panel mount Jack (Four Screws)

Panel mount Jack (Two Screws)

Panel mount Jack (Bulkhead)

8HEX

1/4-36UNS-2B

4∞Ø2.6

12.7

8.64

9.55

1.7

1/4-36UNS-2A

Ø6.4

8HEX

5.85 5.9

+0.1

Ø6.4

+0.1

111.5

Ø10

1/4-36UNS-2A

Part No. HRS No. Applicable cable

HRM-200-040PBN(40)

323-0790-3 40 Dia. 0.81 type

HRM-200-066PBN(40)

323-0791-6 40 Dia. 1.13, Dia.1.32 type

HRM-200-088PBN(40)

323-0800-5 40 Dia. 1.37 type

Part No. HRS No. Applicable cable

HRM-200-040JBN(40)

323-0792-9 40 Dia. 0.81 type

HRM-200-066JBN(40)

323-0793-1 40 Dia. 1.13, Dia.1.32 type

HRM-200-088JBN(40)

323-0801-8 40 Dia. 1.37 type

Part No. HRS No. Applicable cable

HRM-200-040PJ4BN(40)

323-0795-7 40 Dia. 0.81 type

HRM-200-066PJ4BN(40)

323-0796-0 40 Dia. 1.13, Dia.1.32 type

HRM-200-088PJ4BN(40)

323-0803-3 40 Dia. 1.37 type

9.55

1.7

1/4-36UNS-2A

Ø6.4

2×Ø2.6

Part No. HRS No. Applicable cable

HRM-200-040PJ2BN(40)

323-0794-4 40 Dia. 0.81 type

HRM-200-066PJ2BN(40)

323-0788-1 40 Dia. 1.13, Dia.1.32 type

HRM-200-088PJ2BN(40)

323-0802-0 40 Dia. 1.37 type

Part No. HRS No. Applicable cable

HRM-200-040BPJBN(40)

323-0797-2 40 Dia. 0.81 type

HRM-200-066BPJBN(40)

323-0798-5 40 Dia. 1.13, Dia.1.32 type

HRM-200-088BPJBN(40)

323-0804-6 40 Dia. 1.37 type

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

Reverse polarity SMA

Straight Jack

Panel mount Jack (Four Screws)

Panel mount Jack (Two Screws)

Panel mount Jack (Bulkhead)

Part No. HRS No. Applicable cable

SMA(R)-200-040JBN

323-0926-3 Dia. 0.81 type

SMA(R)-200-066JBN

323-0931-3 Dia. 1.13, Dia.1.32 type

SMA(R)-200-088JBN

323-0904-0 Dia. 1.37 type

Part No. HRS No. Applicable cable

SMA(R)-200-040BPJBN

323-0927-6 Dia. 0.81 type

SMA(R)-200-066BPJBN

323-0902-5 Dia. 1.13, Dia.1.32 type

SMA(R)-200-088BPJBN

323-0901-2 Dia. 1.37 type

4.5 8

1/4-36UNS-2A

8 HEX

Part No. HRS No. Applicable cable

SMA(R)-200-040PJ4BN

323-0928-9 Dia. 0.81 type

SMA(R)-200-066PJ4BN

323-0932-6 Dia. 1.13, Dia.1.32 type

SMA(R)-200-088PJ4BN

323-0934-1 Dia. 1.37 type

1/4-36UNS-2A

1.7

9.55 8.64

12.7

4∞Ø2.6

Part No. HRS No. Applicable cable

SMA(R)-200-040PJ2BN

323-0929-1 Dia. 0.81 type

SMA(R)-200-066PJ2BN

323-0933-9 Dia. 1.13, Dia.1.32 type

SMA(R)-200-088PJ2BN

323-0935-4 Dia. 1.37 type

1/4-36UNS-2A

1.7

9.55 8

12.2

2∞Ø2.6

+0.1

5.9

+0.1

Ø6.4

●Panel cut-out

1/4-36UNS-2A

17 8 HEX

1.5 11 5.85

Ø10

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

L mm

Note : Minimum available length(L) is 50mm

P : Plug

J : Jack

PJ : Panel mount Jack (Four Screws)

PJ2 : Panel mount Jack (Two Screws)

BPJ : Panel mount Jack (Bulkhead)

■How To Specify Cable Assembly

HRM

「※」

-- --A

UFLHF6

Ordering information

q Series name HRM : SMA type

SMAR : Reverse polarity SMA

w Connector type P : Plug

J : Jack

PJ : Panel mount Jack(Four screws)

PJ2 : Panel mount Jack(Two screws)

BPJ : Panel mount Jack(Bulkhead)

e Cable type 04 : Dia. 0.81mm Coaxial cable

066 : Dia. 1.32mm Coaxial cable

068 : Dia. 1.13mm Coaxial cable

088 : Dia. 1.37mm Coaxial cable

r Cable color 04 2 : Black

066

068

088

2 : Black

t Total length(mm) Length(L)

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

4∞Ø2.6

17.9

9.55

12.7

8.64

1.7 1/4-36UNS-2A

17.9

9.55

1.7

1/4-36UNS-2A

12.2

2∞Ø2.6

17.9 8 HEX

11 5.851.5

1/4-36UNS-2A

Ø10

5.9

+0.1

Ø6.4+0.1

●Panel cut-out

1/4-36UNS-2A

5.08

12.7

9.7

6.4

5.08±0.05

4∞Ø1.5+0.1

5.08±0.05

●Panel cut-out

■SMA conversion adapter

SMA

Panel mount adapter (Four Screws)

Panel mount adapter (Two Screws)

Panel mount adapter (Bulkhead)

PCB mount adapter

Part No. HRS No.

HRMJ-U.FLJ-PA4 311-0465-2

Part No. HRS No.

HRMJ-U.FLJ-PA2 311-0467-8

Part No. HRS No.

HRMJ-U.FLJ-BPA-4 311-0463-7

Part No. HRS No. Finish

HRMJ-U.FLJ-PC

311-0411-3 Nickel plated

HRMJ-U.FLJ-PC(01)

311-0411-3 01 Gold plated

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

17.9

1/4-36UNS-2A

12.7

9.55 8.64

1.7

4∞Ø2.6

2∞Ø2.6

17.9

1/4-36UNS-2A

9.55

1.7

12.2

17.9

1/4-36UNS-2A

9.55

1.5

8 HEX

5.85

5.9+0.1

Ø6.4+0.1

Ø10

●Mounting pattern

Reverse polarity SMA

Panel mount adapter (Four Screws)

Panel mount adapter (Two Screws)

Panel mount adapter (Bulkhead)

Part No. HRS No.

SMA(R)J-U.FLJ-PA4 311-0466-5

Part No. HRS No.

SMA(R)J-U.FLJ-PA2 311-0468-0

Part No. HRS No.

SMA(R)J-U.FLJ-BPA-4 311-0464-0

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 06/2019. Contents are subject to change without notice for the purpose of improvements.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com